Will hboot 1.4 work for the Evo V 4G? - HTC EVO 3D

Will the hboot 1.4 from this post (note, it's attached to the OP, I'm talking about the hboot, nothing else from that thread) work on the HTC Evo V 4G? S-OFF with Jbear (the latest ICS version).

Depends on the kernel.
sudo passwd root

ZWYATT said:
Depends on the kernel.
sudo passwd root
Click to expand...
Click to collapse
I'm asking whether or not the phone is actually compatible with it I want AOKP, which is why I want to flash this.

thattypicalnerd said:
I'm asking whether or not the phone is actually compatible with it I want AOKP, which is why I want to flash this.
Click to expand...
Click to collapse
What hboot are you in now? I see the jbear, but 1.57? I would think it should work because there are people with sprint evos that flashed the vm bootloader. Only one.way to find out.
Sent from my PG86100 using xda app-developers app

I ran the 1.4eng hboot on my Evo V for a while.
sudo passwd root

raptoro07 said:
What hboot are you in now? I see the jbear, but 1.57? I would think it should work because there are people with sprint evos that flashed the vm bootloader. Only one.way to find out.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
1.57 at the time of writing in the OP.
And I found my answer- I'm now S-OFF, running the ENG HBOOT 1.04, and my Evo V 4G thinks it's an Evo 3D! Pretty sweet, huh? For those people in the future-
http://androidforums.com/evo-v-4g-a...ng-turning-your-phone-into-evo-3d-thread.html
^This explains pretty much everything.

Related

Hboot 1.58 vs Hboot 1.4

I'm on hboot 1.58.5858 s-off. I did.the wire trick and used the custom hboot. I tried flashing cm10 and I got a boot loop.
My question is if I change to hboot 1.4 will cm10 boot and which hboot is better?
Sent from my HTC EVO 3D using xda app-developers app
Yes and 1.4.
The 1.58 hboot causes bootloops on CM Roms. You need to downgrade to 1.4 which is simple since you are s-off. It really is a good hboot as you can flash anything except the new HTC kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Yes and 1.4.
The 1.58 hboot causes bootloops on CM Roms. You need to downgrade to 1.4 which is simple since you are s-off. It really is a good hboot as you can flash anything except the new HTC kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Is the new kernel faster than the old? I don't want to downgrade if my phone were to slow down.
Sent from my PG86100 using xda app-developers app
kevin130 said:
Is the new kernel faster than the old? I don't want to downgrade if my phone were to slow down.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Afaik, there are no benefits that anyone's found to running the new HTC kernel over the vm leak kernel. There are other kernels like Mac that are nice, but they run on the older hboot too.
The thing is, you can go back to 1.58 anytime you want since you are s-off.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Afaik, there are no benefits that anyone's found to running the new HTC kernel over the vm leak kernel. There are other kernels like Mac that are nice, but they run on the older hboot too.
The thing is, you can go back to 1.58 anytime you want since you are s-off.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Okay thanks. If you can give me the link to the vm leak kernel that would be awesome. I'll flash that with the cm10 ROM.
Sent from my awesome HTC EVO 3D Using the XDA app.
kevin130 said:
Okay thanks. If you can give me the link to the vm leak kernel that would be awesome. I'll flash that with the cm10 ROM.
Sent from my awesome HTC EVO 3D Using the XDA app.
Click to expand...
Click to collapse
I think the vm kernel is for sense Roms. Just run the kernel that comes with the Rom or try the Mac kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
I think the vm kernel is for sense Roms. Just run the kernel that comes with the Rom or try the Mac kernel.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Okay. I'm running Cool ICS Rom. If I downgrade, will I downgrade the kernel as well? Or will it just not boot at all?
Sent from my awesome HTC EVO 3D Using the XDA app.

[Q] Way to get Root/S-OFF on HBOOT 1.19?

I've previously rooted my EVO 4G and just recently, my Transformer TF101.
I'm finally bored enough with my EVO LTE. I booted to the Recovery/info screen and snagged a screenshot (attached).
I'd rather NOT wipe everything off my phone by using HTC's unlock.
Thoughts? Suggestions?
Thanks in advance.
I thought 1.15 was latest.....o.o
Sent from my EVO using xda app-developers app
1.19 is the latest hboot and as far as I know the only way to root is to unlock hboot. There is a universal root tool but it won't let you flash roms and if I'm not mistaken it still unlocks hboot on newer htc phones
I have the new HBOOT 1.19 and Im unlocked, rooted and have TWRP recovery. Being s-on or s-off isn't a big deal. I could pretty much do what anyone with s-off could do but only thing is I have to approach it differently.
Sent from my EVO using xda premium
shook187 said:
I have the new HBOOT 1.19 and Im unlocked, rooted and have TWRP recovery. Being s-on or s-off isn't a big deal. I could pretty much do what anyone with s-off could do but only thing is I have to approach it differently.
Click to expand...
Click to collapse
I have hboot 1.19 and my software version is 2.13.651.1 710RD. I'm unlocked, rooted and also have TWRP recovery and am s-on. When I rooted my phone it also gave me SuperSU. I'm super lost now because I can't flash any ROMs to my phone. I've tried the charmeleon ROM and also the tranquility ROM but when TWRP is at the end of the Installing process it says that it failed and that there is no md5 or something like that.
what am I doing wrong?
You have to flash the kernel separately unless you're S-off (or Hboot 1.12, then it doesn't matter).
Sent using my HTC EVO LTE and a magic wand
FinZ28 said:
You have to flash the kernel separately unless you're S-off (or Hboot 1.12, then it doesn't matter).
Sent using my HTC EVO LTE and a magic wand
Click to expand...
Click to collapse
How would you do that?
jklatt747 said:
How would you do that?
Click to expand...
Click to collapse
I believe you have to do it through fastboot. I'm not certain as I'm on Hboot 1.12 and don't have to worry about it. Sorry I'm not of more help
Sent using my HTC EVO LTE and a magic wand
FinZ28 said:
I believe you have to do it through fastboot. I'm not certain as I'm on Hboot 1.12 and don't have to worry about it. Sorry I'm not of more help
Sent using my HTC EVO LTE and a magic wand
Click to expand...
Click to collapse
Does anyone know of any kernels that would work for the Evo LTE with what I described up top?
Get the ROM you wanna flash, then pull the boot.IMG out of it's zip , then either fastboot flash that or use flash image GUI to flash while booted, the go to recovery and flash new ROM.
Boot.IMG contains the kernel.
Sent from my EVO using xda premium
jklatt747 said:
Does anyone know of any kernels that would work for the Evo LTE with what I described up top?
Click to expand...
Click to collapse
MeanROM and JellyBomb Domination as well as others have kernel installers written into the script for people that are S-ON so no need to flash the kernel separatly. Click the names in my SIG to go to those threads
Also make sure you are using the latest version of twrp 2.3.1.0

How to Root a HTC 3d hboot 1.58.000

I got my wifey phone that she wants rooted I have unlocked it one time n put meanrom on it n all it did would keep rebooting over n over idk what I did wrong n I had s-on instead of s-off maybe that's where I went wrong or the rom was trying to put on it was for the wrong hboot but if anyone can help me out this n if there is any jelly bean roms out yet that I can put on it n she running the newest ics from sprint
Sent from my SPH-L710 using xda app-developers app
galaxys3man30 said:
I got my wifey phone that she wants rooted I have unlocked it one time n put meanrom on it n all it did would keep rebooting over n over idk what I did wrong n I had s-on instead of s-off maybe that's where I went wrong or the rom was trying to put on it was for the wrong hboot but if anyone can help me out this n if there is any jelly bean roms out yet that I can put on it n she running the newest ics from sprint
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
AOSP ROMs wont boot on hboot 1.4. youd have to get S-Off and downgrade. Its probably not booting cuz you didnt turn smart flash on 4ext reccovery. If you dont have the recovery install it. 4ext.net Acheiving s-off is easy. Use the wire trick.
kevin130 said:
AOSP ROMs wont boot on hboot 1.4. youd have to get S-Off and downgrade. Its probably not booting cuz you didnt turn smart flash on 4ext reccovery. If you dont have the recovery install it. 4ext.net Acheiving s-off is easy. Use the wire trick.
Click to expand...
Click to collapse
OK thx bro ibwoupd thank but im out thanks for today lol I will thank it tomorrow n but I have hboot 1.58.0000 what Rom will work for that or do I have to down grade to 1.3?
Sent from my SPH-L710 using xda app-developers app
No problem. If you want to use the latest ICS kernel that you would want to stay on 1.58. If you want AOSP ROMs then you would have to downgrade to 1.4. If you want to downgrade you are going to have to get s-off.
Sent from my PG86100 using xda app-developers app
She wants jelly bean if its out yet I've haven't really looked for yet but if I got it unlocked n s off is rooted for to do any rom I want to put on it
Sent from my SPH-L710 using xda app-developers app
kevin130 said:
AOSP ROMs wont boot on hboot 1.4.
Click to expand...
Click to collapse
kevin130 said:
If you want AOSP ROMs then you would have to downgrade to 1.4.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Just to clarify a typo, you need a non 1.58 hboot to boot aosp jb ROMs. I recommend 1.4 as Kevin does. Have you seen ramjet's easy guide to s-off?
http://forum.xda-developers.com/showthread.php?t=1889438
coal686 said:
Just to clarify a typo, you need a non 1.58 hboot to boot aosp jb ROMs. I recommend 1.4 as Kevin does. Have you seen ramjet's ready guide to s-off?
http://forum.xda-developers.com/showthread.php?t=1889438
Click to expand...
Click to collapse
Thanks for clearing that up. Didn't know 1.5 worked too.
Sent from my PG86100 using xda app-developers app
kevin130 said:
Thanks for clearing that up. Didn't know 1.5 worked too.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Now that you mention it, I'm not sure about 1.50. I know it works for 1.4 Revolutionary, so I'd just go with that one.
coal686 said:
Now that you mention it, I'm not sure about 1.50. I know it works for 1.4 Revolutionary, so I'd just go with that one.
Click to expand...
Click to collapse
Yes, GB and AOSP ROM's boot with 1.5. Details in this thread.
ramjet73
Noob question, where can i find 1.58? Burnt out trying to look for it.....
Sent from my PG86100 using xda app-developers app
supahero00 said:
Noob question, where can i find 1.58? Burnt out trying to look for it.....
Click to expand...
Click to collapse
Here.
ramjet73
I'm using 1.5, works fine and well.
airs0ft3r said:
I'm using 1.5, works fine and well.
Click to expand...
Click to collapse
That depends on what ROM you want to run. Some current Sense ROM's like Viper3D and Cool ICS won't boot without the 1.58 or JuopunutBear 1.58.5858 hboot installed.
ramjet73
i have 1.58 and using 4Ext touch recovery program
problem flah htc evo 3d
Hello I' ve a problem with my htc evo 3d. Some days ago I unloked my terminal with htc dev. After i flashed a recovery and Virtuous rom. Now the problem.... i tryed to change the rom but the terminal turn on, show me thre htc write and turn of. I did't know the problem. I can only enter in recovery mode...somebody can halp me??? tnx

HBoot Versions?

So my question is what's the difference between HBoot 1.12, 1.15, and 1.19. I see a bunch of people downgrading to 1.12 from 1.19.
I currently have 1.12 S-On and am looking to change it to S-Off cause it's a lot easier to change ROMs around, I was wondering if I should bother upgrading as well or...?
Thanks!
HixVAC said:
So my question is what's the difference between HBoot 1.12, 1.15, and 1.19. I see a bunch of people downgrading to 1.12 from 1.19.
I currently have 1.12 S-On and am looking to change it to S-Off cause it's a lot easier to change ROMs around, I was wondering if I should bother upgrading as well or...?
Thanks!
Click to expand...
Click to collapse
If you have 1.12 do not update your hboot. You can and should run lazy panda to obtain s-off.
njfoses said:
If you have 1.12 do not update your hboot. You can and should run lazy panda to obtain s-off.
Click to expand...
Click to collapse
According to their site, Lazy Panda is no longer supported. Now you have to RUU to upgrade your Hboot and use Dirty Racun to gain S-off. With Hboot 1.12 you can flash radio updates through recovery, whereas the newer Hboots you can't, at least without gaining S-off first. Also, with Hboot 1.12 you don't have to flash the kernel separately from the ROM. Those are the main differences as I understand it.
Sent using my HTC EVO LTE and a magic wand
If anybody washes lazy panda, I still have it...
Sent from my EVO using xda premium
Pachonk said:
If anybody washes lazy panda, I still have it...
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Any way you can get me a copy of it? I've been wanting to go S-off for awhile now. I'm on Hboot 1.12.
Sent using my HTC EVO LTE and a magic wand
FinZ28 said:
Any way you can get me a copy of it? I've been wanting to go S-off for awhile now. I'm on Hboot 1.12.
Sent using my HTC EVO LTE and a magic wand
Click to expand...
Click to collapse
i posted the wrong link the first time...use at your own risk!
https://www.dropbox.com/s/xxjlrnb7o11grp7/FeedPanda-RELEASE-Jewel-WIN.zip
Thanks!
Sent using my HTC EVO LTE and a magic wand
Just ran Lazy Panda with no issues whatsoever. I'm a happy camper now
Sent using my HTC EVO LTE and a magic wand
Is it possible to run lazy panda on Windows 8. I want to install Meanbean but I am on HBOOT 1.12 unlocked and s-on. I need the updated firmware. Hope there is a work around or I am gonna be stuck in Meanrom 6.5
Sent from my EVO using xda app-developers app
NoMerC4U said:
Is it possible to run lazy panda on Windows 8. I want to install Meanbean but I am on HBOOT 1.12 unlocked and s-on. I need the updated firmware. Hope there is a work around or I am gonna be stuck in Meanrom 6.5
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Captain_Throwback usually makes a recovery flashable zip for radios he just got back from vacation so it should be soon

Looking for RUU for 2.13.651.1

Does anyone have a link to where I can find the RUU for ICS 2.13.651.1? I am still running that on my LTEvo and I need to bring it back to stock (S-On and all) so Sprint will look at it. (They already told me they saw it was rooted and unlocked so they wont run the diagnosis software on it) I don't want to update it to JellyBean.
Here.
http://unlimited.io/jewel.htm
Sent from my EVO using xda premium
FinZ28 said:
Here.
http://unlimited.io/jewel.htm
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Awesome thanks! I currently have the 1.12 hboot...will that matter? The link says 1.19
sharky17 said:
Awesome thanks! I currently have the 1.12 hboot...will that matter? The link says 1.19
Click to expand...
Click to collapse
The RUU will update your Hboot version.
If you are S-off, running the RUU won't change it to S-on. There are some other tools available to change S-off back to S-on, though.
Check out the link in my sig for an explanation of the different Hboots.
Sent from my EVO using xda premium
Here are all the ruu files for our device provided by jmz_taylor or jmz_software...
http://androidfiles.org/ruu/?developer=Jewel
Sent from my EVO using xda app-developers app
Thanks everyone. Yes I know how to change back to S-On and all the steps I need to take to return to stock. Thanks!

Categories

Resources