I have this issue: I'm running on CM10, build 2012-08-18 and I would to like to upgrade to latest build. When I install CM10 nightly (or anything build) over the original build and then I make a call I don't hear anything :crying:
OK, then I make full wipe and voila, it works! OK, I wait when applications restore from google account but they don;t restore all settings (for example Touchdown), so I restore Apps/Data/Both via MyBackup Restore and... no sound when make call :crying::crying:
Long story short: on CM10 I cannot restore anything else I lost sound when callind (no ringtone but don't hear second side).
This is unpleasant because restoring system get a lot of time.
Any ideas?
P.S. More into about my phone: flashed original ROM via ODIN, then root and recovery, then CM10. No Jelly Bean leaked ROMs were installed after flashing original ROM (ICS).
Same here!
Do you found a fix?
Yeah. M also facing same
pradeepb said:
Yeah. M also facing same
Click to expand...
Click to collapse
Try flashing modems. If it dont work, send to technical assistence.
Enable lockscreen sounds....known cm10 problem
any resolution? i have sound working until i make first call in ANY app (viber,skype,csipsimple,caller).
doggydog2 said:
any resolution? i have sound working until i make first call in ANY app (viber,skype,csipsimple,caller).
Click to expand...
Click to collapse
read above
I don't even have lockcreen enabled and I don't see any sound settings there.
I got the same problem on cm10.1 2012-01-03 nightly, this is a serious problem that they need to solve..
---------- Post added at 12:51 PM ---------- Previous post was at 12:48 PM ----------
OK I just solved this problem by enabling lock screen sounds, at first it did not work but then I restarted and it works, credits to whoever figured this out
shaneel1491 said:
I got the same problem on cm10.1 2012-01-03 nightly, this is a serious problem that they need to solve..
---------- Post added at 12:51 PM ---------- Previous post was at 12:48 PM ----------
OK I just solved this problem by enabling lock screen sounds, at first it did not work but then I restarted and it works, credits to whoever figured this out
Click to expand...
Click to collapse
Did you mean 2013-01-03? Me too but for me helped enabling repro during the call and then disabling it and then all works well
It is a really really annoying bug. A system sound has to be made first - the lock screen does that IF you have sound on. If you make a call before doing this, forget about any sound.
I agree it is a pain in the arse and if I knew how to fix it I would. You can use Tasker to reset the volume, play a sound, then reset volume, but it is annoying. Only thing stopping me switching over.
SOLVED
Hi guys.
Don't know if this helps someone now, but i had this problem recently on two different phones. Two weeks ago with my HTC One M7 and today with my girlfriends SGS3 i9305. with HTC i didn't figured out back then what was the problem, but i fixed it somehow after re-flashing/re-installing .. but now i think i know what was the problem. With both phones in-call sound/mic disappeared for no reason. what i noticed in both cases problem was restoring my setting from Google account. with HTC i did not give attention to that, i was happy that it worked after some 5h of trying different things. But now with SGS3 after many attempts i tried without Google restore and voila ... works just fine. After this i connected phone to Google account, but did not restored settings.
I rad many forums and saw that in case of SGS3 it can be hardware problem..but in my case I've tried VIBER and everything was working good. so it was not mic/earpiece problem for sure.
Hope someone finds this useful.
Happy Holidays to everyone!
Related
My Touchpad's audio is no longer working properly. After a while it stops making sound altogether until I restart. Changing DSP settings doesn't seem to help.
This problem started sometime recently on CM7 Alpha 3. I wiped dalvik cache and battery cache and did a factory reset. That did not solve the problem. I did a full wipe and installed CM9 Alpha 0.5, and the problem persists here as well.
I have booted into WebOS once since installing CM to test the sound there. It worked, but I didn't use it long enough to determine if it would have failed after a while there too.
Has anybody else experienced this? Or any ideas on what I might try to resolve this?
Thanks.
Check some of these out
http://code.google.com/p/cmtouchpad/issues/detail?id=343
http://code.google.com/p/cmtouchpad/issues/detail?id=340
http://code.google.com/p/cmtouchpad/issues/detail?id=329
http://code.google.com/p/cmtouchpad/issues/detail?id=83
http://code.google.com/p/cmtouchpad/issues/detail?id=81
http://code.google.com/p/cmtouchpad/issues/detail?id=71
Sent from my HP Touchpad using xda premium
Thanks for that, but none of those issues are what I'm experiencing. I've tried some of the suggestions in some of those cases, but to no avail.
Yeah there are a few of us with this problem.... Alpha 3 is when it started. I'm still looking for a fix.
---------- Post added at 12:30 AM ---------- Previous post was at 12:14 AM ----------
http://code.google.com/p/cmtouchpad/issues/detail?id=625#c7
Add your details here. Hopefully its an easy fix.
I rebooted into WebOS and played for a while, discovered that this problem works there too. I'm going to try to WebOS Doctor the Touchpad, but someone over on the bug tracker said it was likely a hardware issue, and would need warranty replacement. (http://code.google.com/p/cmtouchpad...Milestone Owner Summary&groupby=&sort=&id=625)
Bummer.
In case anybody is still experiencing the issue, it is resolved for me by using CM9 Alpha 2 and the latest Bricked kernel (v0.6 I believe).
Yep thank god for bricked!
Hey,
I have a problem with the upper speaker (the one used during calls etc). Sometimes it simply stops working until I restart the phone. The other speaker is working fine. The other side can always hear me.
I can't figure out where the problem lies. I've had the same problem on Omega v33/Perseus 27a, however I did a MegaWipe followed by fresh install of Omega v34/Perseus 27a/JKay. Previously I thought it was caused by custom dialer, however now I'm using the stock one. I blamed ac1d sound mod for it, but now I'm not using it anymore and still the same issue. I've tried plugging in and out headphones after rebooting, but its working fine.
Any ideas what can cause it?
Anyone?
Go to service center ...its hardware fault.
You sure? It only happens sometimes and reboot helps
Crunozaur said:
You sure? It only happens sometimes and reboot helps
Click to expand...
Click to collapse
But as u said u already tried to hard reset any change your ROM too....if this is software problem then it should solved by factory reset or changing a rom
Sent from my GT-I9300 using Tapatalk 2
It could be some app (i used titanium backup restore) or maybe kernel related. I need to figure out what's causing it, I kinda doubt hw is causing it though
You'll find it probably is hw fault most mods or kernels shouldnt break the front speaker man
Sent from my GT-I9300 using XDA Premium HD app
Yeah this is a hardware fault. Its happened to me once before. It is something to do with the call audio processing. I reflashed my device 15 times with different roms before sending it for repair and none fixed it.
Luckily their service is fast. I had my phone back within five days.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 07:55 PM ---------- Previous post was at 07:54 PM ----------
They also upgraded me from 16gb storage to 32gb storage which was nice of them.
Sent from my GT-I9300 using xda app-developers app
I remember there were often issues with lack of audio during calls in early CM10 for example. There is still a hope its software-related
I have the same issue but is only with Perseus Kernel
Hi Crunozaur,
I have the same issue with the Speaker but is only when i install the Perseus kernel (since alpha28.2)
Here is what i've done to replicate the issue:
Turn on the phone
Test if the speaker works by making a call
Plug the Headset (any headphones will work also)
listen to music, Fm Radio, even a call with the headset will work
Unplug the Headset or Headphones
Make a call
I've tried with the following ROMS:
FoxHound 1.6 to 1.8
Android Revolution HD 17 to 19
Stock
In all of these this issue appears only when i install the Perseus kernel, with siyah, ninphetamin3 and Stock everything works fine.
It's a shame because in previous releases this was my favorite kernel.
Hope i've been helpfull.
So, without noticing for a while, it seems my IMEis are fried. I went to a week long music festival and my phone was doing just fine all along, but when I got home I started having some problems with connectivity and receiving/sending messages and calls. (not having flashed another rom then.)
The weird thing is that whenever I flash a stock based rom, connectivity to the network works about 80% of the time?? Wouldn't that be impossible without the proper IMEIs in place?
My numbers show as "all ones" and "all twos" respectively, I have tried quite some ways of restoring IMEIs without any luck :/ The chameleon app was able to change them to a two or three digit number with some brackets and asterisks in it, but not to the number I want it to be :c
Any help would be wildly appreciated!
Thanks guys! -Boris
Try this link this worked for me after a few tries http://bbs.elephone.hk/thread-3088-1-1.html#.V53WrETTXqA
If you get errors there's a YouTube video showing in detail how to restore imei hope this helps
---------- Post added at 11:02 AM ---------- Previous post was at 10:51 AM ----------
Iv found the video https://youtu.be/w9POQK3kf6U
Wow this guide actually worked I had tried this way before from another guide but I always got the "failed to send command" error. This worked beautifully!
Thanks man!
Dear users,
I'm new owner of X820 4GB/32GB from yesterday. I changed stock rom by latest Small EUI by Aurel with last patch and after I tried Resurrection Remix 3.8.3. In both systems I had problem during phone call, I hear no beeps and voice. It's same with receiver and main speaker, I can hear only end call beep. I was afraid that it's problem with my phone, but when I restore my stock rom, it works well here.
Can anybody help me, where could be problem?
EDIT: I wiped phone to factory defaults and reflashed rom without Viper and calling works well!!! If someone know, how to use Viper with working call, let me (us) know please.
I'm having the same issue bro...
It was due to viper4fx in my case...
akkiman.01 said:
I'm having the same issue bro...
It was due to viper4fx in my case...
---------- Post added at 03:12 PM ---------- Previous post was at 03:12 PM ----------
I'm having the same issue bro...
It was due to viper4fx in my case...
Click to expand...
Click to collapse
Thanks for your reply. I thought so little bit. I had Viper too. I previously tried only uninstall drivers and nothing happened, but now tried remove Viper directly and call audio works well.
EDIT: No it don't works, it works only when I tried call my phone number, when I call other no. it's quite.
the call is connected but I can't hear voice anymore... the mic is also not working...
I happens only with calls...
I tried to fully uninstall the viper driver but still no success...
Please anyone tell me how to fix this without flashing the stock ROM as I have exhausted my net pack
I'm having the strangest problem, and I've experienced this on multiple Android 10 only roms for Platina, it is relating to audio problems. It is the only thing I have trouble with on this ROM and wonder if anyone you had the same thing? I believe they are all related in some way!
Problem 1: When I use the regular dialer, and dial out, the dialing tone after calling a number comes through the speaker output and switches to normal ear piece sound the moment the call is answered
Problem 2: Using apps like WhatsApp, WeChat, LINE, and Kakaotalk, if making AUDIO only calls, I cannot hear the other person through the normal ear piece but if I switch to speaker, it works fine. The other person has no problem hearing me at all. Using Video chat works just fine and in normal fashion.
Problem 3: Whenever I am on speaker in any application, Increasing or decreasing the volume doesnt do anything
Could you tell me the location of the Audio file maybe I can look through in my file explorer and compare it to what a normal audio file should look like?
I've checked Volume, permissions, etc.. and cant figure this out. I've searched forums and everything and most people have a problem with the mic, not the speaker on their end.
Thanks for any help
Again, no problems if I use a Android 9 (custom or official), and it's just the earpiece speaker in apps other than the normal dialer. (normal dialer works like it should)
Flash this zip that I made and tell me https://mega.nz/file/xBoEAIxY#02Pp2SEnmnrS9f0kr8tJp_SNQfLMR7WEIYhIAO9pPq8
what rom Q u using?
---------- Post added at 12:07 AM ---------- Previous post was at 12:06 AM ----------
coz that old issue
soyimparable said:
Flash this zip that I made and tell me https://mega.nz/file/xBoEAIxY#02Pp2SEnmnrS9f0kr8tJp_SNQfLMR7WEIYhIAO9pPq8
Click to expand...
Click to collapse
First of all, thank you for trying to help me. Lately I've seen some questions go unnoticed. As I only have access to my dad's phone at the moment and he only has whatsapp and viber, i tried those too. Whatsapp still suffers from the same problem I noted. I never tested it on Viber prior so I can't comment, but when I created a voice to voice call, I hear it finally on my phone but it comes through the speaker but it isnt on speaker mode. If I turn on speaker mode on my phone, the volume is just much louder.
Regarding the normal dialer and dialing, I actually switched to Bliss Rom 12.7 after writing the original question and that part seemed to be already solved when I tested it.
Not sure which question of mine you sought to try to help me with?
ndrabodo said:
what rom Q u using?
---------- Post added at 12:07 AM ---------- Previous post was at 12:06 AM ----------
coz that old issue
Click to expand...
Click to collapse
Back in April when I was mainly trying to switch to Android 10, I tried almost all of them that were up in the ROMS section. I haven't tried the xiaomi official one yet but I did try xiaomi eu miui 12 with android 10 and that also has this problem.
Currently running Blissrom 12.7 that was released just a few days ago
It just doesnt make sense how I see no one else having this problem, yet my ear piece is working fine for normal operation and/or when I am running Android 9 on the phone.
I've tried playing around with OK GOOGLE, GOOGLE ASSISTANT, I dont use either now those so they were already off or didnt exist in my settings, but since installed and tried all kinds of variations.