Related
Has anyone else had issues booting into recovery mode? I have a 10.1 GT-p7510 running android 3.2 , and i'm trying to root the device. The problem i'm encountering is when i'm booting into recovery mode the screen does appear, however its constantly and quickly moving or flashing. (Like old television sets when the horizontal alignment was out and the picture flashed/scrolled up or down really fast) Does anyone have any ideas/tips?
@i just reflash the original firwmare to do again the root ecc but the problem persist..
Hi i had the same problem and posted a thread like yours a few days ago:
http://forum.xda-developers.com/showthread.php?t=1572815
someone posted a fix in that thread. Hope this help.
Seems to be a common trend with the newer tabs.
WTF, i love you
hello Andy991 did you get a working fix for this issue above link does not fix the issue for me.
Found solution see http://forum.xda-developers.com/showpost.php?p=26899307&postcount=311
my tablet specs.:
noname, 7", RK2918 Cortex A8, 512 MB DRR3, 4 GB, mini HDMI, mini USB, SD Card (external), camera 1 (front), wireless and audio from realtek, no bluetooth.
buttons: volume up and down, on/off, reset
original OS: Android Gingerbread 2.3.1
mainboard: M732HR_V1.2 20110921 (from PCB)
(updates made from external sd-card with "update.img", also supports flashing with RKFlash tools via usb)
----------------------------------------------------------------------------------
mtd table from original update.img:
initrd=0x62000000,0x500000
mtdparts rk29xxnand:
[email protected](misc),
[email protected](kernel),
[email protected](boot),
[email protected](recovery),
[email protected](system),
[email protected](backup),
[email protected](cache),
[email protected](userdata),
[email protected](kpanic),
[email protected](user)
----------------------------------------------------------------------------------
needed a firmware (stock or custom) to be able to use some apps etc, so i flashed the one given here:
RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
(http://forum.xda-developers.com/showthread.php?t=2012654, beta build - v1.2)
after flashing completed, tablet hard bricked. no screen, nothing (even backlight of screen not working, so it is not a "black screen of death" but instead "death" only i guess :laugh: , though it reacts on charging with led)
anyone have any idea about what happened or how to recover it?
ps. atm i work on "29-30 pin shorted" thing (http://www.slatedroid.com/topic/41388-unbrick-instructions/) but not sure if it will work for me yet.
update
I was able to de-brick it (couldnt use "short 29-30 pins" thing, chips had a metal cover over them soldered to mainboard, I used reset button with volume buttons, I pushed them like crazy alot of times and somehow got rockchip usb flash state for once then re-flashed stock rom (I had rom-dump files and original "update.img"), it is working now with stock rom.
continued as follows:
1) Tried alot of other roms from similar tablets, some just stays at android screen, some works with corrupt graphics, etc
2) Oma_Odys_Loox_JB_CM10_4.1.2_v1.2 = killed the tab, debricked by luck
3) Oma_Odys_Loox_JB_4.1.1_v1.2.1a (with Oma_extSD_to_NAND_OTG_fix) = works till welcome screen, but touchpad not working so i couldnt check the system further more
4) Oma - Odys Loox GB 2.3.1 v1.3a = touchpad not working, and graphics weird (low color depth+some minor glitches on image), just waiting at main screen cause of touchpad, adb shell works (with root)
5) flashed original kernel over Oma - Odys Loox GB 2.3.1 v1.3a, screen resolution, color depth fine now, touchpad working too, but have problem with sensor, left-right or up-down shifted up to tablet position, trying to fix it
6) activated "ro.sf.hwrotation=270" in build.prop, sensor fine now. Only problem left is touch screen Y axis inverted
7) still working on Y axis issue, but weird thing is calibration works correctly, no inverted axis! and succesfull. but then I have to click upside for something downside or downside for something upside.
8) darn. it is not up or down. it becomes left or right if flip tablet to 1 side.
9) i decided that problem is about touch-driver and i dont have enough knowledge to fix it. left over tablet with factory rom, working but ehhh.
note:
thx to Oma7144, i learned few things from his/her posts, i try to find thx button now xD
Hey Guys I am really impressed about the device named goophone but in real according to the stock launcher it is a kuphone.
So first i can not image who this price is possible but good i accept
for only 70€ including dhl and some cases
So as second some information about this device:
Specs according to Shop: (dhgate)
Model i5C
Band 2G: GSM 850/900/1800/1900MHz
Sim Card Single SIM, Single standby (Micro SIM Card)
Shell Material Plastic
OS Android 4.2
CPU MTK6572, Cortex A7 dual core, 1.2GHz
ROM 4GB
RAM 512MB
Display Size 4.0 Inch
Type TFT, Capacitive touch screen
Resolution 800 x 480 pixels
FM Radio Yes, earphone needed
Earphone Port 3.5mm
Card Extend Support TF card up to 64GB extended
Camera/Picture Resolution Dual Cameras, front camera 2.0MP, back camera 2.0MP with flashlight, up to 1600 ×1200 pixels resolution
GPS Yes
WIFI Yes, 802.11 b/g/n
Bluetooth Bluetooth 2.0
Dimensions 124 x 60 x 8.9 mm
Net Weight(Including battery) 117g
So why i am creating a new thread ?
I observed that there are some bugs and the launcher is so slow and not really i0S7
I also noticed that some other i5c clones have better launcher, so possible to port some systemapps ?
I am not a developer but i can find some recouces for the phone
I also can upload my current rom( but how )
So if you have questions or have the same phone please support his thread for any roms :
You know if we dont care for this noone will do , and for this price, a softwaresupport from manufactor, it is a prank /fool
Sorry for my not ideomatic english , i am german
So stay unhurt and be happy ^^
KiPhone , GooPhone ! KuPhone
Hi ,i own a Goophone i5c , but i thing there is more a Kiphone i5c 2g.
Anyone of you know how to change the stock launcher and set it as default ? i download a few launcher but nothing i cant set them as default launcher ! i tray even a few app like home switcher and other but nothing seem to work , now im stuck with the stock launcher KuLauncher or something like this , but this launcher is very laggy .
Thank You!
Hello I have bought a goophone i5C or a kiphone i5C
apple logo at back (seems painted)
MTK6572/512M of RAM/ photo 2MP back
come with a rom which is a mix of IOS7 and IOS6
when I try a root method on reboot It Bricked so I need a dump or the original rom to flash it under SP Flash Tool
I have tried some Flash with SP Flash Tools with some device with mtk6572 with the same spec (MTK6572 1Ghz, 512 Ram, 4G Rom, graphic Chipset Mali 400MP, ...)
SP Flash Tool work but I have a black screen with a sound with start ...
If someone can give me a dump of your goophone i5C - Kiphone i5C It will be great
there is a tuto how you can do it
http://www.needrom.com/tutorial-backup-rom-with-mtkdroidtools/
Clean rom would be great
creasqui said:
So if you have questions or have the same phone please support his thread for any roms :
Click to expand...
Click to collapse
Great initiative, I received mine yesterday (gadgetdealer phone 5c-> same specs) I already lost a whole evening with mtk droid and sp flash tools. So far I managed just to make a dump of the current rom and noticed the kulauncher apk in there besides other non wanted apk's. But none of any threads is very clear of procedures and don't want to brick it.
For root: framaroot works (select supersu). Googlecalendarsyncadapter.apk 4.2.2 was required to get de calendar working with Google. And i had do update youtube manually to get it playing videos.
Update: I tried to flash it with the Goophone i5c rom you can find in several other threads. I am not really sure if it is compatible but so far I haven't been able to start the actual flashing... it seems it cannot find the device. Already tried by putting the phone in bootloader mode... no luck (but perhaps it saved me from a brick phone). Does anybody found a way to get a better notification bar that shows icons for messages like whatsapp, gmail,play store... ? I already installed the SystemUI.apk from Goophone i5c.. it's compatible but does not change anything.
Sup guys
I just received mine one day ago and I noticed that is going veeery lagy. I just started to fight with it. If I make any progress, I'll share my results with you. Btw This thread is a great idea!!!
Regards
Hello to everybody,
I have received one phone as described (bought on DHgate).
I have root it with farmaroot: ok.
But, I can not change the launcher, I have the launcher kuLauncher.apk. I have tried with different apps: home switch, home manager, ... but any of them can erase kuLauncher as the home launcher.
Does anyone reached to change it?
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
I have this phone as well and would love to put a new rom on it or change the launcher. Any progress on this? I will say there are menus when holding the volume buttons down and the power button. But that's mainly recovery and some add on side loading stuff. Then there's another menu but it's in full Japanese and I can't make any of it out.
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
help! i deleted kulauncher...
ChaosEn3 said:
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
Click to expand...
Click to collapse
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
kuLauncher
angularpainzzr said:
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
Click to expand...
Click to collapse
MascioSpam94 said:
Hi guys i deleted the kuLauncher.apk and now the phone bootloop on Apple logo.
I've found that we can use adb when the phone boot in factory mode but i can't find the kulauncher.apk file on the internet.
The phone is rooted but i can't have root shell via adb.
Days ago i had a backup of the rom whit MTK tool but if i try to flash it whit SP_flash tool it return me error 8038.
Anyone can help me?
Edit: the phone came from dhgate, if you wait (bad internet connection) a week i can upload my backup for you.
Ps: mine doesn't have the external sd-card installed but near the battery there is a free micro-sd card slot
Sent from my Galaxy Note II using xda app-developers app
Click to expand...
Click to collapse
Here you go
PS. Tell me if you need the .odex file aswell
PPS. I'm working my way throught the rom to find a solution for changing the stock launcher (iLauncher is sooo much smoother on the device) It's just the launcher thats laggy the phone itself is pretty smooth
rom kuphone i5c
i need rom kuphone i5c
need help
I also have same phone, mistakenly without taking its rom backup i deleted some system files,
now my mobile stop at booting - just adroid logo apprear (not goto main screen)
I cant do any thing with it because usb debugging is also off, can any one provide me its original rom, i will be very thankful to him plus i will pay him too.
waiting please reply
Clean rom
In my quest for a clean rom i came on this one: needrom.com/mobile/ px-c5s5 . Any chances it would work on our devices? Or could it help to mix up with our original rom... Just a thought.
My biggest frustrations with this phone.
Hi, I also bought this phone (for my daughter with her money) without knowing what it was. I believe it's a kuPhone due to a folder 'Kustore' on the device and the microphone hole which is very close to the left bottom screw and further away from the audio jack than on real GooPhone.
Anyway, this phone can be bought very cheap (65eur, free shipping ) and performs well.
However I see a general problem with signal reception:
Wifi: have to be in very close range to the router, about 5m maximum.
3G: rather slow, speed test reporting max. 1Mbps.
GPS: slow locking (several minutes) and not very precise, but still usable.
FM: worse than my other devices inside the house.
Other remarks:
Audio jack only fits 3 pin headphones, 4 pins with microphone do not work well enough to be usable (low volume, shallow sound).
Camera is only 2 megapixel and show green shading under artificial light and some angles. LED flash very weak, does not help.
Microphone mute is activated accidentally when calling (by your cheek pressing the screen at the mute icon, proximity sensor does not seem to work as expected.
When you go to recent call, the caller app crashes.
512 MB memory seems to fill easily, phone blocks and need to cold boot by pressing HOME+POWER buttons together for 10 seconds
Apart from these I do not see any of the problems mentioned in this forum, UI is response and working very well.
I'm prepared to share my ROM if this is of any use to someone, but he has to explain me how. I never did such a thing.
If anyone can help to improve signal reception, welcome!
Hi guys,
I bought a similar phone but I don't know if is agophone or a kuphone.
There is any way to understand what I bought?
There is a way to change the recovery boot in English, now is in Chinese and is not easy to manage
w1r3d said:
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
Click to expand...
Click to collapse
I have the same problem??? any fix?
DonSaffadu said:
I have the same problem??? any fix?
Click to expand...
Click to collapse
hi guys I solve this problem by setting my date and time, and the phone work fine now!
"I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK..."
I've seen this on my phone too, but it's been a while ago and I was able to fix it. It's working since. I don't remember what I did to fix it, but it was not something difficult to do, so don't despair and try a few things.
bootloader
Anyone succeed to flash a boot loader on the kuphone?
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
V.Mr.Gamer said:
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
Click to expand...
Click to collapse
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
V.Mr.Gamer said:
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
Click to expand...
Click to collapse
Ok i found another rom (the telecast one)
on installing it
touch is working again but the y axis is inverted
i used adb to get it fixed (and success)
on digging more
the soft buttons are not working
wifi is not working
g-sensor isnt working
camera not working
got root access
help needed
found The ROM (Firmware) SPEED PRO TAB(Care Solutions Tab)
I was googling out and found the perfect rom for my tablet
the Speed PRO Tab(Care Solutions Tab) Is a clone of COBY KYROS MID7042
MID7042 was written on the motherboard of the tablet
the site is
I CANNOT PASTE THE LINK SINCE I DONT HAVE PERMISSION
But Go to google search MID7042 firmware
and it is a flashmyandroid site
remove the "*"
just register/Login
and download the ROM on 2nd page
Flash it through LiveSuit(link on the same page)
and TADDA
IT Worked Like a charm
but i still want CM10 or AOKP 4.1.x for it
any help praised
Thankyou
After updating to firmware 1.31 with teclast OTA updater the touchscreen of the tablet has ghost touches.. I have testet it with a screen touch test app and there are ghost touches on the upper screen boarder without touching the tablet by fingers...
Before the firmware update to 1.31 everything was fine...
Does anyone else got this problem?
I had downloaded the previous older firmware (1.28, no touchscreen problems before with that firmware, zip file) from the teclast website and wantet to downgrade it by flashing the 1.28 firmware with the teclast update tool (local update, choosing the zip file) , but it stops after rebooting with the message "error" and boots up the 1.31 firmware system... What im doing wrong?
I really like the tablet, but these ghost touches since the update to firmware 1.31 are a real problem....
mitsch266 said:
After updating to firmware 1.31 with teclast OTA updater the touchscreen of the tablet has ghost touches.. I have testet it with a screen touch test app and there are ghost touches on the upper screen boarder without touching the tablet by fingers...
Before the firmware update to 1.31 everything was fine...
Does anyone else got this problem?
I had downloaded the previous older firmware (1.28, no touchscreen problems before with that firmware, zip file) from the teclast website and wantet to downgrade it by flashing the 1.28 firmware with the teclast update tool (local update, choosing the zip file) , but it stops after rebooting with the message "error" and boots up the 1.31 firmware system... What im doing wrong?
I really like the tablet, but these ghost touches since the update to firmware 1.31 are a real problem....
Click to expand...
Click to collapse
I have the same problem. We are waiting the new firmware 1.31+
udolini said:
I have the same problem. We are waiting the new firmware 1.31+
Click to expand...
Click to collapse
OK... So it seems to be a software problem... Good to know... Hopefully the issue get solved very soon with a new firmware update....
We're discussing the matter HERE, Teclast seems to be aware of the problem. Let's hope they solve it, and soon enough
I bought the tablet on 26/12/2017 and I had problems with touchscreen but I reflashed 1.32 firmware and I solved the problem. I installed TRWP and rooted with Magisk working well the last 3 weeks. But I started again to have problemas with touchscreen, It doesn`t response any touch. I am trying to flash other firmwares and try to solve the problem, but now I have a tablet with no touchscreen. I am thinking to flash T10 (E3C6)-TOS-V2.00-CDF8 firmware, I know that I have EC35 model but I desesperate. The next step is to give back the tablet to gearbest.
txesterfield said:
I bought the tablet on 26/12/2017 and I had problems with touchscreen but I reflashed 1.32 firmware and I solved the problem. I installed TRWP and rooted with Magisk working well the last 3 weeks. But I started again to have problemas with touchscreen, It doesn`t response any touch. I am trying to flash other firmwares and try to solve the problem, but now I have a tablet with no touchscreen. I am thinking to flash T10 (E3C6)-TOS-V2.00-CDF8 firmware, I know that I have EC35 model but I desesperate. The next step is to give back the tablet to gearbest.
Click to expand...
Click to collapse
I have the same problem.
Maybe completely loosing touch is more of a hardware problem.
It is possible that something break, or whatever went wrong, and no firmware can fix hardware issues. I suggest you try to return your devices. Hopefully, this is just rare hardware problem.
Alan_SP said:
Maybe completely loosing touch is more of a hardware problem.
It is possible that something break, or whatever went wrong, and no firmware can fix hardware issues. I suggest you try to return your devices. Hopefully, this is just rare hardware problem.
Click to expand...
Click to collapse
I don`t think so. I am testing to install another versions and when I installed T10 (E3C6)-TOS-V2.00-CDF8 (I know, the model is not the same), the touchscreen works but with ghost touches. The panel is ok, they have to fix the digitilazer driver.
txesterfield said:
I don`t think so. I am testing to install another versions and when I installed T10 (E3C6)-TOS-V2.00-CDF8 (I know, the model is not the same), the touchscreen works but with ghost touches. The panel is ok, they have to fix the digitilazer driver.
Click to expand...
Click to collapse
Alan_SP said:
Maybe completely loosing touch is more of a hardware problem.
It is possible that something break, or whatever went wrong, and no firmware can fix hardware issues. I suggest you try to return your devices. Hopefully, this is just rare hardware problem.
Click to expand...
Click to collapse
I have found a strange solution. I have inserted a Samsung MicroSD and I have removed it, yesterday it didn't works but this morning (power off the tablet all the night) the touchscreen is working again!! I have to test if the hard case it could be the problem, but I don't think so.
This is really strange behavior. Who knows why it stopped working and then started.
FW 2.01
I have the same issue with ghost touchscreen after installing the firmware 2.01. My previous version was 1.32. I downloaded the FW and then installed it through OTA from local place.
Dead spots in T10 Touch screen
Radek72 said:
I have the same issue with ghost touchscreen after installing the firmware 2.01. My previous version was 1.32. I downloaded the FW and then installed it through OTA from local place.
Click to expand...
Click to collapse
Recently updated from build V1.32 to V1.35.
Have notice that there is (quick often) a "dead" area about 1/2 way up the landscape screen and for most of the width. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store. If I move rapidly it seems to minimize it. In some games I have to rotate the screen 180 deg sometimes in order to get a response.
Also the screen is sometimes unresponsive and I have to close with power button a open screen again to get touch response.
Have had some problems with Hall sensor not allowing complete boot and screen response, but I seem to cure that with taking T10 out of the folder / case before booting.
Any Comments or similar experiences by anyone. Think I may go back to V1.32 if I can.
geo_57_3103 said:
Think I may go back to V1.32 if I can.
Click to expand...
Click to collapse
You can, you need to flash full version of 1.32 ROM.
geo_57_3103 said:
Recently updated from build V1.32 to V1.35.
Have notice that there is (quick often) a "dead" area about 1/2 way up the landscape screen and for most of the width. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store. If I move rapidly it seems to minimize it. In some games I have to rotate the screen 180 deg sometimes in order to get a response.
Also the screen is sometimes unresponsive and I have to close with power button a open screen again to get touch response.
Have had some problems with Hall sensor not allowing complete boot and screen response, but I seem to cure that with taking T10 out of the folder / case before booting.
Any Comments or similar experiences by anyone. Think I may go back to V1.32 if I can.
Click to expand...
Click to collapse
It is a hardware problem. When my touchscreen wasn't working (power on) I unmounted it and with the tablet unmounted its begin to work. I pressed all the electronics components and nowadays it is working perfectly.
txesterfield said:
It is a hardware problem. When my touchscreen wasn't working (power on) I unmounted it and with the tablet unmounted its begin to work. I pressed all the electronics components and nowadays it is working perfectly.
Click to expand...
Click to collapse
Explain please? What do you mean by unmount?
Do I have to disassemble the tablet? Is it a setting?
geo_57_3103 said:
Explain please? What do you mean by unmount?
Do I have to disassemble the tablet? Is it a setting?
Click to expand...
Click to collapse
Yes. Sorry about my english... I disassembled it and it works prefectly
Ghost touch problem is fixed?
Hi, Teclast replied to my message stating the ghost problem is fixed.. Can someone Please confirm it? Whats the latest firmware you've installed?
txesterfield said:
Yes. Sorry about my english... I disassembled it and it works prefectly
Click to expand...
Click to collapse
Would you be able to post step by step instructions on how you disassembled and reassembled to fix this problem?
Andreserralheiro said:
Hi, Teclast replied to my message stating the ghost problem is fixed.. Can someone Please confirm it? Whats the latest firmware you've installed?
Click to expand...
Click to collapse
Also very interested if anyone has had any progress??
Andreserralheiro said:
Hi, Teclast replied to my message stating the ghost problem is fixed.. Can someone Please confirm it? Whats the latest firmware you've installed?
Click to expand...
Click to collapse
I'm on v1.35, I'm not sure if ghost touches are completely solved, but at the moment I don't see them that much (i.e. lately I didn't noticed any). But, it actually also depends which game you play, as they were problem only in games and only in certain games.
Also, I heard that they are less problem for TOS version, but TOS has other problems, mainly with Google software not working, but I see it is supposedly solved with latest TOS, which is still not available for my device (only for G6 devices).
Anyway, at least there's effort from Teclast to solve this problem and other issues also.
For me, generally speaking, for some time ghost touches aren't problem, but your usage may differ from mine and you can have problems (or not, of course).
geo_57_3103 said:
Recently updated from build V1.32 to V1.35.
Have notice that there is (quick often) a "dead" area about 1/2 way up the landscape screen and for most of the width. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store. If I move rapidly it seems to minimize it. In some games I have to rotate the screen 180 deg sometimes in order to get a response.
Click to expand...
Click to collapse
I have a touchscreen problem after updating to version 1.35.
In the lower area is a dead area. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store.
Here is my Problem-Video: youtu.be/wPt5pG_fvvU
I hope Teclast solves the problem quickly!!
Baraccuda