After updating to firmware 1.31 with teclast OTA updater the touchscreen of the tablet has ghost touches.. I have testet it with a screen touch test app and there are ghost touches on the upper screen boarder without touching the tablet by fingers...
Before the firmware update to 1.31 everything was fine...
Does anyone else got this problem?
I had downloaded the previous older firmware (1.28, no touchscreen problems before with that firmware, zip file) from the teclast website and wantet to downgrade it by flashing the 1.28 firmware with the teclast update tool (local update, choosing the zip file) , but it stops after rebooting with the message "error" and boots up the 1.31 firmware system... What im doing wrong?
I really like the tablet, but these ghost touches since the update to firmware 1.31 are a real problem....
mitsch266 said:
After updating to firmware 1.31 with teclast OTA updater the touchscreen of the tablet has ghost touches.. I have testet it with a screen touch test app and there are ghost touches on the upper screen boarder without touching the tablet by fingers...
Before the firmware update to 1.31 everything was fine...
Does anyone else got this problem?
I had downloaded the previous older firmware (1.28, no touchscreen problems before with that firmware, zip file) from the teclast website and wantet to downgrade it by flashing the 1.28 firmware with the teclast update tool (local update, choosing the zip file) , but it stops after rebooting with the message "error" and boots up the 1.31 firmware system... What im doing wrong?
I really like the tablet, but these ghost touches since the update to firmware 1.31 are a real problem....
Click to expand...
Click to collapse
I have the same problem. We are waiting the new firmware 1.31+
udolini said:
I have the same problem. We are waiting the new firmware 1.31+
Click to expand...
Click to collapse
OK... So it seems to be a software problem... Good to know... Hopefully the issue get solved very soon with a new firmware update....
We're discussing the matter HERE, Teclast seems to be aware of the problem. Let's hope they solve it, and soon enough
I bought the tablet on 26/12/2017 and I had problems with touchscreen but I reflashed 1.32 firmware and I solved the problem. I installed TRWP and rooted with Magisk working well the last 3 weeks. But I started again to have problemas with touchscreen, It doesn`t response any touch. I am trying to flash other firmwares and try to solve the problem, but now I have a tablet with no touchscreen. I am thinking to flash T10 (E3C6)-TOS-V2.00-CDF8 firmware, I know that I have EC35 model but I desesperate. The next step is to give back the tablet to gearbest.
txesterfield said:
I bought the tablet on 26/12/2017 and I had problems with touchscreen but I reflashed 1.32 firmware and I solved the problem. I installed TRWP and rooted with Magisk working well the last 3 weeks. But I started again to have problemas with touchscreen, It doesn`t response any touch. I am trying to flash other firmwares and try to solve the problem, but now I have a tablet with no touchscreen. I am thinking to flash T10 (E3C6)-TOS-V2.00-CDF8 firmware, I know that I have EC35 model but I desesperate. The next step is to give back the tablet to gearbest.
Click to expand...
Click to collapse
I have the same problem.
Maybe completely loosing touch is more of a hardware problem.
It is possible that something break, or whatever went wrong, and no firmware can fix hardware issues. I suggest you try to return your devices. Hopefully, this is just rare hardware problem.
Alan_SP said:
Maybe completely loosing touch is more of a hardware problem.
It is possible that something break, or whatever went wrong, and no firmware can fix hardware issues. I suggest you try to return your devices. Hopefully, this is just rare hardware problem.
Click to expand...
Click to collapse
I don`t think so. I am testing to install another versions and when I installed T10 (E3C6)-TOS-V2.00-CDF8 (I know, the model is not the same), the touchscreen works but with ghost touches. The panel is ok, they have to fix the digitilazer driver.
txesterfield said:
I don`t think so. I am testing to install another versions and when I installed T10 (E3C6)-TOS-V2.00-CDF8 (I know, the model is not the same), the touchscreen works but with ghost touches. The panel is ok, they have to fix the digitilazer driver.
Click to expand...
Click to collapse
Alan_SP said:
Maybe completely loosing touch is more of a hardware problem.
It is possible that something break, or whatever went wrong, and no firmware can fix hardware issues. I suggest you try to return your devices. Hopefully, this is just rare hardware problem.
Click to expand...
Click to collapse
I have found a strange solution. I have inserted a Samsung MicroSD and I have removed it, yesterday it didn't works but this morning (power off the tablet all the night) the touchscreen is working again!! I have to test if the hard case it could be the problem, but I don't think so.
This is really strange behavior. Who knows why it stopped working and then started.
FW 2.01
I have the same issue with ghost touchscreen after installing the firmware 2.01. My previous version was 1.32. I downloaded the FW and then installed it through OTA from local place.
Dead spots in T10 Touch screen
Radek72 said:
I have the same issue with ghost touchscreen after installing the firmware 2.01. My previous version was 1.32. I downloaded the FW and then installed it through OTA from local place.
Click to expand...
Click to collapse
Recently updated from build V1.32 to V1.35.
Have notice that there is (quick often) a "dead" area about 1/2 way up the landscape screen and for most of the width. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store. If I move rapidly it seems to minimize it. In some games I have to rotate the screen 180 deg sometimes in order to get a response.
Also the screen is sometimes unresponsive and I have to close with power button a open screen again to get touch response.
Have had some problems with Hall sensor not allowing complete boot and screen response, but I seem to cure that with taking T10 out of the folder / case before booting.
Any Comments or similar experiences by anyone. Think I may go back to V1.32 if I can.
geo_57_3103 said:
Think I may go back to V1.32 if I can.
Click to expand...
Click to collapse
You can, you need to flash full version of 1.32 ROM.
geo_57_3103 said:
Recently updated from build V1.32 to V1.35.
Have notice that there is (quick often) a "dead" area about 1/2 way up the landscape screen and for most of the width. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store. If I move rapidly it seems to minimize it. In some games I have to rotate the screen 180 deg sometimes in order to get a response.
Also the screen is sometimes unresponsive and I have to close with power button a open screen again to get touch response.
Have had some problems with Hall sensor not allowing complete boot and screen response, but I seem to cure that with taking T10 out of the folder / case before booting.
Any Comments or similar experiences by anyone. Think I may go back to V1.32 if I can.
Click to expand...
Click to collapse
It is a hardware problem. When my touchscreen wasn't working (power on) I unmounted it and with the tablet unmounted its begin to work. I pressed all the electronics components and nowadays it is working perfectly.
txesterfield said:
It is a hardware problem. When my touchscreen wasn't working (power on) I unmounted it and with the tablet unmounted its begin to work. I pressed all the electronics components and nowadays it is working perfectly.
Click to expand...
Click to collapse
Explain please? What do you mean by unmount?
Do I have to disassemble the tablet? Is it a setting?
geo_57_3103 said:
Explain please? What do you mean by unmount?
Do I have to disassemble the tablet? Is it a setting?
Click to expand...
Click to collapse
Yes. Sorry about my english... I disassembled it and it works prefectly
Ghost touch problem is fixed?
Hi, Teclast replied to my message stating the ghost problem is fixed.. Can someone Please confirm it? Whats the latest firmware you've installed?
txesterfield said:
Yes. Sorry about my english... I disassembled it and it works prefectly
Click to expand...
Click to collapse
Would you be able to post step by step instructions on how you disassembled and reassembled to fix this problem?
Andreserralheiro said:
Hi, Teclast replied to my message stating the ghost problem is fixed.. Can someone Please confirm it? Whats the latest firmware you've installed?
Click to expand...
Click to collapse
Also very interested if anyone has had any progress??
Andreserralheiro said:
Hi, Teclast replied to my message stating the ghost problem is fixed.. Can someone Please confirm it? Whats the latest firmware you've installed?
Click to expand...
Click to collapse
I'm on v1.35, I'm not sure if ghost touches are completely solved, but at the moment I don't see them that much (i.e. lately I didn't noticed any). But, it actually also depends which game you play, as they were problem only in games and only in certain games.
Also, I heard that they are less problem for TOS version, but TOS has other problems, mainly with Google software not working, but I see it is supposedly solved with latest TOS, which is still not available for my device (only for G6 devices).
Anyway, at least there's effort from Teclast to solve this problem and other issues also.
For me, generally speaking, for some time ghost touches aren't problem, but your usage may differ from mine and you can have problems (or not, of course).
geo_57_3103 said:
Recently updated from build V1.32 to V1.35.
Have notice that there is (quick often) a "dead" area about 1/2 way up the landscape screen and for most of the width. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store. If I move rapidly it seems to minimize it. In some games I have to rotate the screen 180 deg sometimes in order to get a response.
Click to expand...
Click to collapse
I have a touchscreen problem after updating to version 1.35.
In the lower area is a dead area. It's about 10 - 15 mm wide. Detected it with "Touch Screen Test" from the play store.
Here is my Problem-Video: youtu.be/wPt5pG_fvvU
I hope Teclast solves the problem quickly!!
Baraccuda
Related
Hi,
I flashed my x10a with latest flashtool with 2.3.3 firmware. The flash was successful, but after the flash it's screen touch is no more working. I thought that there might be problem with the firmware that I used, so I again checked with many firmwares, but none of them solved my problem.
Then I tried to repair my phone with Pc Companion, it says that no software is available for my phone. Also I tried with Sony Update Service, this also said no software for my phone.
I am tired now. I tried all the methods that I found on internet. Isn't there any solution for me now? I know that It's not a hardware problem because before flashing its screen was working without any problem. I know you guys here are expert in android problems. So hope you will help me in this problem? I am from Nepal. There isn't sony service in my country. What is the solution for me? I need your help....:crying:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Bjornlindekens said:
could you tell us exactly what you flashed with flashtool ?
and what i understand is that your phone DOES work it fully loads up but not responding to your touchscreen ?
and any other info on what you might have flashed ?
it could just be freezing (so it seems like its not responding)
Click to expand...
Click to collapse
Bro thanks for your reply, I flashed X10a_2.1update1_r2.1.A.0.435_Generic.ftf, X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf, and few more firmwares like this. I used flashtool-0.8.0.0-windows_2.exe to flash the phone. Ya you are right my phone DOES work it fully loads up but not responding to my touchscreen
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
me.amar said:
Keys are working well, volume keys, back keys all are working. After flashing finished option comes to choose the language and I can't go ahead than that because screen touch will not work.
Click to expand...
Click to collapse
did your touchscreen worked on 2.1 firmware
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
techdevilisnowmonster said:
did your touchscreen worked on 2.1 firmware
Click to expand...
Click to collapse
Before flashing it was working.But after flashing it didn't worked on any firmware
Bjornlindekens said:
as im googling for this problem EVRYTHING leads to software problems.
for example this post
"''The touchscreen on my phone stopped working. Everything else is working (buttons), except the touchscreen. It shows everything but I can't do nothing with my finger.. I've had this problem before, but then it could be fixed by simply taking out the battery and rebooting that way. This time that didn't work. First thing that I tried was factory resetting the phone, clearing all caches, etc. Touchscreen still not working after booting. Then I flashed SonyStyle V1.1 touchscreen still not working. Then I 'repaired' it with SEUS, touchscreen was working fine.""
so the best thing you can do right now is use SEUS to get back to original firmware.
http://sony-ericsson-update-service.en.uptodown.com/
and a guide to help
http://www.esato.com/board/viewtopic.php?topic=171599
if it works then you are absolutly sure its not a hardware problem.
Click to expand...
Click to collapse
Does this works for android phones?
yes the tutorial is just wrong i noticed .
you could just use it as a guideline tough my apolegies
Hey guys,
I was using my phone, everything ok but SUDDENLY it seems to have some touch issues! Sometimes the touch is unresponsive, for like 0,2 / 0,3 sec. I press and I have to press it again. That's frustrating!! Especially when typing on keyboard!! I thinked that the problem was caused by the ROM ( maybe little lags ) and I changed ROM, but the problem is still alive!! The phone didn't fall, this happened suddenly!!
Can someone help me?
Slender_ said:
Hey guys,
I was using my phone, everything ok but SUDDENLY it seems to have some touch issues! Sometimes the touch is unresponsive, for like 0,2 / 0,3 sec. I press and I have to press it again. That's frustrating!! Especially when typing on keyboard!! I thinked that the problem was caused by the ROM ( maybe little lags ) and I changed ROM, but the problem is still alive!! The phone didn't fall, this happened suddenly!!
Can someone help me?
Click to expand...
Click to collapse
Clear cache/ dalvik cache/ factory reset and see if this helps.
Also, did you dirty flash your ROM ? This usually happens if you dirty flash a ROM. Always start fresh.
Secondly, if you made backup and trying to restore it, that might cause the problem.
Hnk1 said:
Clear cache/ dalvik cache/ factory reset and see if this helps.
Also, did you dirty flash your ROM ? This usually happens if you dirty flash a ROM. Always start fresh.
Secondly, if you made backup and trying to restore it, that might cause the problem.
Click to expand...
Click to collapse
I tried to wipe.. but same issue. I always did the wipes before flashing a new ROM, so I think the installs were always clean. I tried to flash a firmware with flashtool, but same result..
Is there a solution for this? Now I'm trying to flash Gingerbread firmware, but I think the problem will remain..
Slender_ said:
I tried to wipe.. but same issue. I always did the wipes before flashing a new ROM, so I think the installs were always clean. I tried to flash a firmware with flashtool, but same result..
Is there a solution for this? Now I'm trying to flash Gingerbread firmware, but I think the problem will remain..
Click to expand...
Click to collapse
Well, 0.2 seconds is a very small delay. However, if the problem persists, I suppose you should check typing speed/sensitivity in settings.
I suspect you have alot of applications in your phone and Xperia U has only 512 RAM which is not enough to run JB smoothly.
Hnk1 said:
Well, 0.2 seconds is a very small delay. However, if the problem persists, I suppose you should check typing speed/sensitivity in settings.
I suspect you have alot of applications in your phone and Xperia U has only 512 RAM which is not enough to run JB smoothly.
Click to expand...
Click to collapse
Nope.. I know that our device can not run lot of apps, in fact I have just some apps, no Facebook and something like that..
Anyway, for example, I did a touch screen test : it works in all zones, but, if I touch the screen 10 times, only 7 times can be "received" from device
Slender_ said:
Nope.. I know that our device can not run lot of apps, in fact I have just some apps, no Facebook and something like that..
Anyway, for example, I did a touch screen test : it works in all zones, but, if I touch the screen 10 times, only 7 times can be "received" from device
Click to expand...
Click to collapse
Maybe the digitiser is having some sort of problem. This is usually caused by humidity / water in your phone in small amount . I hope I'm wrong.
Clean your screen thoroughly and remove screen protector and use ultra thin protector instead. See if that helps. On my devices smudgy screen has problems with touch .
Same issue here
Im also having same issue here..
it is taking only 6 out of 10 touches. a few regions not responding to the touch
same problem with me, i hope some people give best solutions for this issue
Maybe it's caused by charging the phone with non-official chargers. It overcharge all the hardware and can easily damage it.
Anyways if you have warranty you can flash the original ROM, relock the bootloader and bring it to Sony.
Guys maybe you can help me, my phone is behaving very strange. It is a Tianhe H920+ with 4gb ROM, identical with Mlais MX58 Pro, Auxus Nuclea N1 and others.
Roms for Auxus Nuclea N1 are working perfectly, but, first of all i have problems with the rear camera, i am not getting any error messages, but just only the front camera is working and the switch camera option is missing, after i install some third party camera app it freezes.
Phone was suited with Tianhe ROM, build march 2014, for sure i made backup. What i have found out, when i flash the original BOOT.IMG, camera works fine, but the old kernel will be installed. I have unpacked it, checked also init, init.project files, they are totally the same, no change there, just the Zimage differs / Kernel.
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware, but like i already mentioned rear camera is not working with other kernels, all other functions are ok. Is there any possible solution? Framework fix or something please?
Till now i have tried almost 10-15 roms, from MX58 Pro, Star, Tianhe, but non of them is suited with a kernel with working rear camera :crying:. Thank you very much.
Heyy delltech1.. I've also facing similar issue...have you found any solution to your problem?
Tianhe H920+ Wake up issue
delltech1 said:
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware
Click to expand...
Click to collapse
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Tianhe
Eleichstetten said:
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Click to expand...
Click to collapse
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
delltech1 said:
Before you will flash it, take the PRELOADER file from a good known working rom and replace it.
Click to expand...
Click to collapse
Could you recommend a good preloader?
Tianhe
Eleichstetten said:
Could you recommend a good preloader?
Click to expand...
Click to collapse
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Camera still not working
delltech1 said:
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Click to expand...
Click to collapse
I have tryed all roms from needrom and pandavile..nothing.
Now I tried the ROM that was offered in the Pandawill Forum for 8GB Version.
This ROM does include a working preloader (maybe has been changed?)
Anyway, when I flash this ROM, it works, but problems persist.
No change.
CWM 8gb ver. ROM
HI guys, Please could some one upload the 8GB rom flashable with CWM recovery I can not do it with flashtools my usb conenctor is damaged...
PLEASE HELP and save my ass I am starting to be despaired with this phone
THANK YOU for any support and have a nice day
Modified version of Note 3 yasuu ROM.
Just for the case that someone do not know how to replace boot.img (kernel 2014) and replace camera drivers I am uploading modified version of Note 3 yasuu ROM.
No flickering screen,No back camera bug or green camera,No unlock freez yet.
Only bad thing is battery usage, maybe because my USB connector is damaged.I do not know try it out and share your results about the baterry please.
LINK (CWM zip file) :
mediafire.com/download/v3n65fltmwka52z/ROM_NOTE3_Kernel_2014_H920+.+Cam.Drivers.HanyxX.zip
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
OK, Gave it a second try. This time without trying to root.
Well, the wake up issue does not exist anymore.
Unfortunately, it´s just because the phone does not start to Deep Sleep anymore.
It reduces processor rate, but does not start Deep Sleep.
That´s the cause for higher battery consumption.
By the way:
- The package of my phone is not labeled "Tianhe", but "CGC".
- Both cameras did work with this Rom.
- My phone has 8GB of memory and stock ROM is 03/2014
Hello
Eleichstetten said:
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
Click to expand...
Click to collapse
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
I did reset my phone with this firmware from Pandawill Forum (8GB version). The firmware is for H920+ that are produced after March 2014.
It seems, that there has been a change of camera hardware.
http://www.pandawillforum.com/showthread.php?25569-ROM-ROM-for-Tianhe-H920&p=136188&viewfull=1#post136188
This seems to be real stock.
If your phone is produced after March, 2014 and this firmware does not solve the problem, there is a high probability that it is defective.
How to find out?
How can i find out what is the date manufacture of my phone?
about Tianhe H920+ turbo /pandawill/, rear camera problems
validoican said:
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
Click to expand...
Click to collapse
Hello,
After trying all firmwares from panda and needrom i find that there is a hardware problem. BAD CONNECTION between board and camera conector!
Try to open the phone and press firmly camera connector to the board. Then put above something thick 1 mm (non metal) to hold the connector in same position.
It's worked fine for me. Good luck to you!:good:
delltech1 said:
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
Click to expand...
Click to collapse
How do you unbrick your phone... ??? Please advise !!!
Hi. I have a problem. When I choose fingerprint lockscreen it doesn't open.
an write :
Attention
An error has occurred with the fingerprint sensor. If this message appears repeatedly, restart your device.
I restart my phone , factory data reset and install stock rom with odin. But not working now.
Please help me
pasja579 said:
Hi. I have a problem. When I choose fingerprint lockscreen it doesn't open.
an write :
Attention
An error has occurred with the fingerprint sensor. If this message appears repeatedly, restart your device.
I restart my phone , factory data reset and install stock rom with odin. But not working now.
Please help me
Click to expand...
Click to collapse
Maybe the fingerprint sensor was damaged, I suggest go to service center and let them check it.
exaflare said:
Maybe the fingerprint sensor was damaged, I suggest go to service center and let them check it.
Click to expand...
Click to collapse
Thank you :good:
But I installed Resurrection Remix to my phone. The rom has 2 bugs. And then I installed android 5.0.2 from sammobile. I think this problem for this reason
pasja579 said:
Thank you :good:
Click to expand...
Click to collapse
Besides even the fingerprint scanner doesn't work you can still use your phone so don't do anything that will make it unusable.
Anyway Galaxy alpha was released september 2014 so its still under 12 months warranty, but for safe just leave it to the experts
exaflare said:
Besides even the fingerprint scanner doesn't work you can still use your phone so don't do anything that will make it unusable.
Anyway Galaxy alpha was released september 2014 so its still under 12 months warranty, but for safe just leave it to the experts
Click to expand...
Click to collapse
You're right. But I rooted this phone
i do have the exact same problem. fingerprint won´t work after i flashed Resurrection Remix.
I even did a full reset to stock with kies. still the fingerprint won´t work.
Anybody know a fix? maybe it has something to do with knox being set to 0x1 ?
MrShibby said:
i do have the exact same problem. fingerprint won´t work after i flashed Resurrection Remix.
I even did a full reset to stock with kies. still the fingerprint won´t work.
Anybody know a fix? maybe it has something to do with knox being set to 0x1 ?
Click to expand...
Click to collapse
Maybe hardware error.
saxmydix said:
Maybe hardware error.
Click to expand...
Click to collapse
But it worked fine before. Why would it suddenly not work after reflashing stock rom again?
It didn´t drop or anything that would explain a hardware error.
I have exactly the same problem. Was happening before Xmas so they sent it away for repair. Apparently some glue had come loose!
But 2 months ago it happened again. I cleared the cache and forced stop on the fingerprint and it worked for a day or two. Then stopped again. About 15 attempts to do the same again and it finally worked long enough for me to change my backup password to something simple. Not worked for weeks now even though I've done a factory reset. The about 4 weeks ago my boyfriends alpha did exactly the same! Surely this shows it has to be a software issue? I'd love it to work at least long enough so I can change to pin to unlock.
Same thing happened to my alpha .
It was working fine since i bought alpha (7 months)
But now its not working , now what to do ?
Service centre has ordered Home button/Sensor .
Will it fix ?
kktkaran said:
Same thing happened to my alpha .
It was working fine since i bought alpha (7 months)
But now its not working , now what to do ?
Service centre has ordered Home button/Sensor .
Will it fix ?
Click to expand...
Click to collapse
Are you sure you never damaged the home button, perhaps dirty fingers or scratches can cause issues to the fingerprint scanner.
No , i haven't dropped my phone or scratched .
I feel the same friend .
pasja579 said:
Hi. I have a problem. When I choose fingerprint lockscreen it doesn't open.
an write :
Attention
An error has occurred with the fingerprint sensor. If this message appears repeatedly, restart your device.
I restart my phone , factory data reset and install stock rom with odin. But not working now.
Please help me
Click to expand...
Click to collapse
Hello, I too feel the same, update my Samsung Galaxy Alpha and not work the fingerprint reader . There is a solution ? I'm worried.
I went to the service centre , and they replaced home button in warrenty.
Now its working
Well, I have the same problem. My Alpha G850F is under Lollipop.
We actually are a lot of users having problems with the fingerprint sensor, isnt'it?
KiDimel said:
Well, I have the same problem. My Alpha G850F is under Lollipop.
We actually are a lot of users having problems with the fingerprint sensor, isnt'it?
Click to expand...
Click to collapse
i have same problem,it was fine a long time and suddenly ,error occurred
it seems that there is no way
i have same problem
Broken Fingerprint scanner with root.
pasja579 said:
You're right. But I rooted this phone
Click to expand...
Click to collapse
Probably use Titanium Backup and clear all data on Application "Fingerprints" Try again but didn't work search on youtube.
---------- Post added at 04:15 AM ---------- Previous post was at 04:11 AM ----------
Also I have this problem too but not rooted or never factory reseted my phone...
Mine too does that...what can I do?
Has anybody downgraded to a lower update? Maybe early 5.0.2 firmwares or even 4.4.4 and see if it gets fixed?
My phone is OnePlus 7T Pro HD1913 EU version. I have recently had a problem with auto-rotating the screen. I tested on the system versions 10.0.7, 10.0.13, 10.0.14, 11.0.5.1, 11.0.6.1, 11.0.7.1 and I have the auto turning upside down every time. I was flashing in different ways (OTA, fastboot, MSM) nothing helps. Full wipe downgrade versions don't help either. The same is true after installing a custom rom. Only when I install closed beta Hydrogen OS 12, auto-rotation works properly. Can someone advise me something?
same issue, I'm on latest Android 11 build after I downgraded from color os 12.1
I also think that it happened after testing the Chinese 12 system. The strangest thing is that when I reinstalled this closed beta 12, it has no problem with proper screen rotation. I tried to calibrate the sensors in the service menu, unfortunately it did not help.
I am facing the same issue. It doesn't bother me when I am portrait mode. When I go to landscape mode, it just reverse my screen up. I try to find solutions but no one I found nothing. If anyone found something please help me with that.
I am also facing the same issue.
Youtuber Techibee has found a way to fix it. He will be uploading his video soon.
https://youtube.com/c/ashokmor007TechiBee
Hope it fixes soon.
here is the link he uploaded the video hope it may help you also.
i tried myself it fixed the auto rotate issue.
Atharvaisbadhir said:
I am also facing the same issue.
Youtuber Techibee has found a way to fix it. He will be uploading his video soon.
https://youtube.com/c/ashokmor007TechiBee
Click to expand...
Click to collapse
Thank you very much. Before this fix was released, I previously flash persist.img from another phone (I didn't make a copy of the my original persist.img). All sensors are working properly, but the fingerprint is not working. I will probably not fix it anymore without sending it to the service.
kemoti said:
Thank you very much. Before this fix was released, I previously flash persist.img from another phone (I didn't make a copy of the my original persist.img). All sensors are working properly, but the fingerprint is not working. I will probably not fix it anymore without sending it to the service.
Click to expand...
Click to collapse
Yeah flashing someone’s else persist breaks your fingerprint functionality and your widevine certificate.
i think you should send it to service centre.