Guys maybe you can help me, my phone is behaving very strange. It is a Tianhe H920+ with 4gb ROM, identical with Mlais MX58 Pro, Auxus Nuclea N1 and others.
Roms for Auxus Nuclea N1 are working perfectly, but, first of all i have problems with the rear camera, i am not getting any error messages, but just only the front camera is working and the switch camera option is missing, after i install some third party camera app it freezes.
Phone was suited with Tianhe ROM, build march 2014, for sure i made backup. What i have found out, when i flash the original BOOT.IMG, camera works fine, but the old kernel will be installed. I have unpacked it, checked also init, init.project files, they are totally the same, no change there, just the Zimage differs / Kernel.
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware, but like i already mentioned rear camera is not working with other kernels, all other functions are ok. Is there any possible solution? Framework fix or something please?
Till now i have tried almost 10-15 roms, from MX58 Pro, Star, Tianhe, but non of them is suited with a kernel with working rear camera :crying:. Thank you very much.
Heyy delltech1.. I've also facing similar issue...have you found any solution to your problem?
Tianhe H920+ Wake up issue
delltech1 said:
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware
Click to expand...
Click to collapse
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Tianhe
Eleichstetten said:
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Click to expand...
Click to collapse
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
delltech1 said:
Before you will flash it, take the PRELOADER file from a good known working rom and replace it.
Click to expand...
Click to collapse
Could you recommend a good preloader?
Tianhe
Eleichstetten said:
Could you recommend a good preloader?
Click to expand...
Click to collapse
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Camera still not working
delltech1 said:
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Click to expand...
Click to collapse
I have tryed all roms from needrom and pandavile..nothing.
Now I tried the ROM that was offered in the Pandawill Forum for 8GB Version.
This ROM does include a working preloader (maybe has been changed?)
Anyway, when I flash this ROM, it works, but problems persist.
No change.
CWM 8gb ver. ROM
HI guys, Please could some one upload the 8GB rom flashable with CWM recovery I can not do it with flashtools my usb conenctor is damaged...
PLEASE HELP and save my ass I am starting to be despaired with this phone
THANK YOU for any support and have a nice day
Modified version of Note 3 yasuu ROM.
Just for the case that someone do not know how to replace boot.img (kernel 2014) and replace camera drivers I am uploading modified version of Note 3 yasuu ROM.
No flickering screen,No back camera bug or green camera,No unlock freez yet.
Only bad thing is battery usage, maybe because my USB connector is damaged.I do not know try it out and share your results about the baterry please.
LINK (CWM zip file) :
mediafire.com/download/v3n65fltmwka52z/ROM_NOTE3_Kernel_2014_H920+.+Cam.Drivers.HanyxX.zip
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
OK, Gave it a second try. This time without trying to root.
Well, the wake up issue does not exist anymore.
Unfortunately, it´s just because the phone does not start to Deep Sleep anymore.
It reduces processor rate, but does not start Deep Sleep.
That´s the cause for higher battery consumption.
By the way:
- The package of my phone is not labeled "Tianhe", but "CGC".
- Both cameras did work with this Rom.
- My phone has 8GB of memory and stock ROM is 03/2014
Hello
Eleichstetten said:
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
Click to expand...
Click to collapse
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
I did reset my phone with this firmware from Pandawill Forum (8GB version). The firmware is for H920+ that are produced after March 2014.
It seems, that there has been a change of camera hardware.
http://www.pandawillforum.com/showthread.php?25569-ROM-ROM-for-Tianhe-H920&p=136188&viewfull=1#post136188
This seems to be real stock.
If your phone is produced after March, 2014 and this firmware does not solve the problem, there is a high probability that it is defective.
How to find out?
How can i find out what is the date manufacture of my phone?
about Tianhe H920+ turbo /pandawill/, rear camera problems
validoican said:
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
Click to expand...
Click to collapse
Hello,
After trying all firmwares from panda and needrom i find that there is a hardware problem. BAD CONNECTION between board and camera conector!
Try to open the phone and press firmly camera connector to the board. Then put above something thick 1 mm (non metal) to hold the connector in same position.
It's worked fine for me. Good luck to you!:good:
delltech1 said:
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
Click to expand...
Click to collapse
How do you unbrick your phone... ??? Please advise !!!
Related
Hi, I finally decided to post my question after many hours searching trough google and xda.
Two weeks ago like many of you I uptdated my x10 to pre-rooted 2.3.3 stock Rom. At this moment I successfully tested wifi hotspot and usb tethering built in fonctions.
But Recently I tried to use it again but any time I checked the option, Android activate it for a second, an then says me "error" under the option name. Usb tehter can't be reactived at all and wifi hotspot can be checked but always uncheck himslef with the error subtitle.
Anyone facing this issue or know where it can come from ? And maybe the fix of course ^^.
Hope I made my self clear because actually I'm french.
Shootereyes said:
Hi, I finally decided to post my question after many hours searching trough google and xda.
Two weeks ago like many of you I uptdated my x10 to pre-rooted 2.3.3 stock Rom. At this moment I successfully tested wifi hotspot and usb tethering built in fonctions.
But Recently I tried to use it again but any time I checked the option, Android activate it for a second, an then says me "error" under the option name. Usb tehter can't be reactived at all and wifi hotspot can be checked but always uncheck himslef with the error subtitle.
Anyone facing this issue or know where it can come from ? And maybe the fix of course ^^.
Hope I made my self clear because actually I'm french.
Click to expand...
Click to collapse
I use Baracle to solve the issue with wifi tethering
https://market.android.com/details?id=net.szym.barnacle&feature=search_result
Yeah this is the solution I used to adopte when was on 2.1. And it was the best until the update.
But as far as what I tested when built-in tether worked it's clearly better. Not just an Ah-hod network but a real hotspot. Basically it's easier for other devices to connect and remember the password without configuring everything especially on windows.
And the usb option was even better, nothing to configure, no password, battery charging during tethering.
Anyway thank for the advice, until I get the solution I'll probably continue to use this app.
When you say "solve the problem with wifi tethering", do you mean you have the same one ?
Sent from my X10i using Tapatalk
Please, no one else, am I the only one facing the issue ? Even on an other device maybe ?
Finally I used SEUS to repare and root it like azazu said. Everything is back. Didn't find any other solution
Wifi hotspot error
Shootereyes said:
wifi hotspot can be checked but always uncheck himslef with the error subtitle
Click to expand...
Click to collapse
I have the same problem and it never has been working from the start ! but USB tethering has no problem. The only way to fix it is to re-flash ?
Well I guess this is the best until someone more expert than us find a solution. I made a reparation with SEUS (sony ericsson update service) and then restore all back with Titanium Backup. Remember to save your contacts and sms before (cause Titanium doesn't). It only took one hours to get it all back just like before (root, bravia, Xloud, fps uncap...)
Hotspot error UNSOLVED 2012-02-01
Here's what I've done so far. I've suffered from this issue on two different Samsung Galaxy TAB's 7" (1 generation), two different Samsung Galaxy S2, two different HTC Desire HD, one ZTE Blade.
This issue is NOT caused by:
*Manufacture of phone
*Internet Service Provider (ISP)
*Operator
*Bluetooth ON/OFF
*root ON/OFF
*Stock Kernel
*Mod Kernel
*Stock Rom
*Mod Rom
*Stock Modem
*Mod Modem
*Android version: 2.3+ has this issue. (I've experienced a different issue on 4.0+; the Hotspot is up running although no device can connect to it.)
The only solution I've found is:
(From Clockwork Recovery):
Wipe Data(system reset)
Wipe Cache
Wipe Dalvik
Format Cache
Format Data
Format System
-Install a Rom (try a different one from what you are using right now).
Reboot
RESULT:
Hotspot working fine....for a while..
When it stops working; you'll have to do the steps above again. Install a different ROM, now you probably can return to your previously ROM which had this issue first. It will probably work. If it doesn't, switch ROM till you find one that works. Sometimes, total randomly; you will be able to use ROMS which this issue has been present earlier.
Yet, this is NOT a permanent solution. You will, no exceptions, experience this issue, on whatever ROM, modem, kernel, stock, not stock, phone, whatever, whatever you choose.
Here's one scenario which I couldn't figure out:
Galaxy TAB 7" 1st generation.
Android 2.3.4
*HOTSPOT ERROR*
WIPE/FORMAT
RE-Flashed Same Rom
*HOTSPOT WORKING*
1 hour later
*HOTSPOT ERROR*
WIPE/FORMAT
RE-Flashed Same Rom
*HOTSPOT WORKING*
5-10 minutes later
*HOTSPOT ERROR*
WIPE/FORMAT
RE-Flashed Same Rom
*HOTSPOT ERROR*
?????
I've also noticed that USB tethering is affected by this issue aswell.
If you have it working, congratulations! Use it while it lasts, nothing stays forever.
regards
/enklast
Hey Guys I am really impressed about the device named goophone but in real according to the stock launcher it is a kuphone.
So first i can not image who this price is possible but good i accept
for only 70€ including dhl and some cases
So as second some information about this device:
Specs according to Shop: (dhgate)
Model i5C
Band 2G: GSM 850/900/1800/1900MHz
Sim Card Single SIM, Single standby (Micro SIM Card)
Shell Material Plastic
OS Android 4.2
CPU MTK6572, Cortex A7 dual core, 1.2GHz
ROM 4GB
RAM 512MB
Display Size 4.0 Inch
Type TFT, Capacitive touch screen
Resolution 800 x 480 pixels
FM Radio Yes, earphone needed
Earphone Port 3.5mm
Card Extend Support TF card up to 64GB extended
Camera/Picture Resolution Dual Cameras, front camera 2.0MP, back camera 2.0MP with flashlight, up to 1600 ×1200 pixels resolution
GPS Yes
WIFI Yes, 802.11 b/g/n
Bluetooth Bluetooth 2.0
Dimensions 124 x 60 x 8.9 mm
Net Weight(Including battery) 117g
So why i am creating a new thread ?
I observed that there are some bugs and the launcher is so slow and not really i0S7
I also noticed that some other i5c clones have better launcher, so possible to port some systemapps ?
I am not a developer but i can find some recouces for the phone
I also can upload my current rom( but how )
So if you have questions or have the same phone please support his thread for any roms :
You know if we dont care for this noone will do , and for this price, a softwaresupport from manufactor, it is a prank /fool
Sorry for my not ideomatic english , i am german
So stay unhurt and be happy ^^
KiPhone , GooPhone ! KuPhone
Hi ,i own a Goophone i5c , but i thing there is more a Kiphone i5c 2g.
Anyone of you know how to change the stock launcher and set it as default ? i download a few launcher but nothing i cant set them as default launcher ! i tray even a few app like home switcher and other but nothing seem to work , now im stuck with the stock launcher KuLauncher or something like this , but this launcher is very laggy .
Thank You!
Hello I have bought a goophone i5C or a kiphone i5C
apple logo at back (seems painted)
MTK6572/512M of RAM/ photo 2MP back
come with a rom which is a mix of IOS7 and IOS6
when I try a root method on reboot It Bricked so I need a dump or the original rom to flash it under SP Flash Tool
I have tried some Flash with SP Flash Tools with some device with mtk6572 with the same spec (MTK6572 1Ghz, 512 Ram, 4G Rom, graphic Chipset Mali 400MP, ...)
SP Flash Tool work but I have a black screen with a sound with start ...
If someone can give me a dump of your goophone i5C - Kiphone i5C It will be great
there is a tuto how you can do it
http://www.needrom.com/tutorial-backup-rom-with-mtkdroidtools/
Clean rom would be great
creasqui said:
So if you have questions or have the same phone please support his thread for any roms :
Click to expand...
Click to collapse
Great initiative, I received mine yesterday (gadgetdealer phone 5c-> same specs) I already lost a whole evening with mtk droid and sp flash tools. So far I managed just to make a dump of the current rom and noticed the kulauncher apk in there besides other non wanted apk's. But none of any threads is very clear of procedures and don't want to brick it.
For root: framaroot works (select supersu). Googlecalendarsyncadapter.apk 4.2.2 was required to get de calendar working with Google. And i had do update youtube manually to get it playing videos.
Update: I tried to flash it with the Goophone i5c rom you can find in several other threads. I am not really sure if it is compatible but so far I haven't been able to start the actual flashing... it seems it cannot find the device. Already tried by putting the phone in bootloader mode... no luck (but perhaps it saved me from a brick phone). Does anybody found a way to get a better notification bar that shows icons for messages like whatsapp, gmail,play store... ? I already installed the SystemUI.apk from Goophone i5c.. it's compatible but does not change anything.
Sup guys
I just received mine one day ago and I noticed that is going veeery lagy. I just started to fight with it. If I make any progress, I'll share my results with you. Btw This thread is a great idea!!!
Regards
Hello to everybody,
I have received one phone as described (bought on DHgate).
I have root it with farmaroot: ok.
But, I can not change the launcher, I have the launcher kuLauncher.apk. I have tried with different apps: home switch, home manager, ... but any of them can erase kuLauncher as the home launcher.
Does anyone reached to change it?
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
I have this phone as well and would love to put a new rom on it or change the launcher. Any progress on this? I will say there are menus when holding the volume buttons down and the power button. But that's mainly recovery and some add on side loading stuff. Then there's another menu but it's in full Japanese and I can't make any of it out.
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
help! i deleted kulauncher...
ChaosEn3 said:
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
Click to expand...
Click to collapse
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
kuLauncher
angularpainzzr said:
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
Click to expand...
Click to collapse
MascioSpam94 said:
Hi guys i deleted the kuLauncher.apk and now the phone bootloop on Apple logo.
I've found that we can use adb when the phone boot in factory mode but i can't find the kulauncher.apk file on the internet.
The phone is rooted but i can't have root shell via adb.
Days ago i had a backup of the rom whit MTK tool but if i try to flash it whit SP_flash tool it return me error 8038.
Anyone can help me?
Edit: the phone came from dhgate, if you wait (bad internet connection) a week i can upload my backup for you.
Ps: mine doesn't have the external sd-card installed but near the battery there is a free micro-sd card slot
Sent from my Galaxy Note II using xda app-developers app
Click to expand...
Click to collapse
Here you go
PS. Tell me if you need the .odex file aswell
PPS. I'm working my way throught the rom to find a solution for changing the stock launcher (iLauncher is sooo much smoother on the device) It's just the launcher thats laggy the phone itself is pretty smooth
rom kuphone i5c
i need rom kuphone i5c
need help
I also have same phone, mistakenly without taking its rom backup i deleted some system files,
now my mobile stop at booting - just adroid logo apprear (not goto main screen)
I cant do any thing with it because usb debugging is also off, can any one provide me its original rom, i will be very thankful to him plus i will pay him too.
waiting please reply
Clean rom
In my quest for a clean rom i came on this one: needrom.com/mobile/ px-c5s5 . Any chances it would work on our devices? Or could it help to mix up with our original rom... Just a thought.
My biggest frustrations with this phone.
Hi, I also bought this phone (for my daughter with her money) without knowing what it was. I believe it's a kuPhone due to a folder 'Kustore' on the device and the microphone hole which is very close to the left bottom screw and further away from the audio jack than on real GooPhone.
Anyway, this phone can be bought very cheap (65eur, free shipping ) and performs well.
However I see a general problem with signal reception:
Wifi: have to be in very close range to the router, about 5m maximum.
3G: rather slow, speed test reporting max. 1Mbps.
GPS: slow locking (several minutes) and not very precise, but still usable.
FM: worse than my other devices inside the house.
Other remarks:
Audio jack only fits 3 pin headphones, 4 pins with microphone do not work well enough to be usable (low volume, shallow sound).
Camera is only 2 megapixel and show green shading under artificial light and some angles. LED flash very weak, does not help.
Microphone mute is activated accidentally when calling (by your cheek pressing the screen at the mute icon, proximity sensor does not seem to work as expected.
When you go to recent call, the caller app crashes.
512 MB memory seems to fill easily, phone blocks and need to cold boot by pressing HOME+POWER buttons together for 10 seconds
Apart from these I do not see any of the problems mentioned in this forum, UI is response and working very well.
I'm prepared to share my ROM if this is of any use to someone, but he has to explain me how. I never did such a thing.
If anyone can help to improve signal reception, welcome!
Hi guys,
I bought a similar phone but I don't know if is agophone or a kuphone.
There is any way to understand what I bought?
There is a way to change the recovery boot in English, now is in Chinese and is not easy to manage
w1r3d said:
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
Click to expand...
Click to collapse
I have the same problem??? any fix?
DonSaffadu said:
I have the same problem??? any fix?
Click to expand...
Click to collapse
hi guys I solve this problem by setting my date and time, and the phone work fine now!
"I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK..."
I've seen this on my phone too, but it's been a while ago and I was able to fix it. It's working since. I don't remember what I did to fix it, but it was not something difficult to do, so don't despair and try a few things.
bootloader
Anyone succeed to flash a boot loader on the kuphone?
Hey Guys,
I use a stable 10.1.3 CM since a year on my S2. Lately the camera started to quit qorking: "can't connect to camera".
About this time the torch (LED app) app did the same thing: "unfortunately torch has stopped".
What I did: do a full data/cache/dalvik cache erase: factory reset.
The camera/torch still malfunctioning.
Then flashed the last nightly CM: cm11-20140429, but still no luck.
Then reflashed the old stable version, maybe if it'll work, but noooo.
Do you have any suggestion to resolve this issue? My phone is 2 years old, never had a problem with it. Until now.
Shall I flash something via Odin?
Is there a "deeper" way to rewrite the camera/LED firmware/code/whatever?
(I was wondering if flashing these 2 CM versions the appropiate firmware's aren't rewritten)
Thanks in advance for the replies!
you can try more ROMs. However, there is a possibility that its a hardware issue.
The camera stopped working on my galaxy S1 after a factory reset.
I never did get it working again, and I tried about 4 different camera firmwares, flashing back to stock, and replaced the camera module too. Nothing worked.
knuckles1978 said:
The camera stopped working on my galaxy S1 after a factory reset.
I never did get it working again, and I tried about 4 different camera firmwares, flashing back to stock, and replaced the camera module too. Nothing worked.
Click to expand...
Click to collapse
Sorry to hear that.
I'm wondering now to replace the camera module as well.
I quickly tried this 3 ROM: aosb_kk_1.3.6_i9100, omni-4.4.4-20140728-i9100-NIGHTLY, Slim-i9100-4.4.2.build.5-OFFICIAL-4068, but with the same disappointig result: no camera, no LED.
If I first start LED/torch isntead of camera, the LED sometimes flashes:
I switch on, but nothing happens. Then switch it off: after a few sec delay the button will show the "off" state, and during this process the LED flashes for 1 sec.
I will try to revert to stock with odin, maybe...
The camera module is very easy to change. All you have to do is unplug it and plug a new one in.
You might be luckier than me.
knuckles1978 said:
The camera module is very easy to change. All you have to do is unplug it and plug a new one in.
You might be luckier than me.
Click to expand...
Click to collapse
Yes, but what if the same thing will appear? Ie. I'll change the camera module, but won't work.
Isn't there an easier way to check if surely the camera moduled is dead?
Btw I downgraded it to stock ROM via Odin, but camera still dead, so it is probably not a software error. :crying:
There's no way of telling if your camera module is broken without putting a new one in.
It didn't fix it for me though. And believe me when I say I spent a lot of time trying to figure it out.
Ok then.
Thank you very much for the support!
Hello everyone,
at first - best ROM I ever tried!
Just one big problem for me:
When the screen is off (sleep mode), I CAN NOT unlock the phone with fingerprint - during first 5 seconds - when display is off, it works. I have to turn on display with power button and AFTER that I CAN unlock with fingerprint with no problems. I want to unlock my phone with fingerprint when the display is off even more than 5 seconds.
Is there a solution?
In stock ROM (16s International) everything works perfect, there were no time limitation. Fingerprint worked everytime even when screen was off for 10 minutes for example.
Where is the problem? It is no hardware problem for sure.
Someone said to use the same finger 3 times instead of 3 different fingers. Try it. It may solve your problem.
I am using the same ROM without the problem which you experienced although sometimes it took more than a second or required a couple of taps on the sensor to unlock the screen.
Go to settings, battery, power saving managements and see if the Ultra Long Standby During Sleep is turned ON. I have that disabled.
Edit. Sorry, I thought that you had the manufacturers' ROM. I had the factory ROM.
I have the same 3 fingerprints for better recognition for sure, but this tip did not help me.
Also I tried to turn off the Long sleep too, did not help to solve this.
Any other ideas @madsurfer1? With screen ON works flawlessly.
Hi guys
I'm experiencing exactly the same issue with my fresh received x829. Haven't tried much on stock ROM but apparently everything was working. Then I flashed AOKP and lignage os v13, and with both the fingerprint only works in the 5 seconds after screen off. And when I mean works, I mean detect a finger, if it's the good one unlocks and if not shows an error. After 5 seconds, the phone shows nothing at all, no unlock and no error.
Have you had any success since these posts ?
Regards
AOKP on my x829 has fingerprint "working" from sleep. It sometimes takes a while or multiple attempts though.
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
same problem
bolof2 said:
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
Click to expand...
Click to collapse
hi
i have the same problem with most of the roms,
is there any solution?
My solution was full wipe, including internal storage. After than clean install ROM. With these steps fingerprint begin works even in deep sleep mode.
Keep in mind that Max 2 has very bad fingerprint at all on every model compared to premium brands. It is slow and sometimes react after few attemps. But works.
If theese steps wont help you - proove claim to the seller of your mobile.
If fingerprint is your priority, I strongly recommend another model, except Le Max 2. Maybe Le Pro is now better with fingerprint.
Try it and let us know.
https://forum.xda-developers.com/showthread.php?t=3408395
Flash latest CN 23S modem, fp problem bye bye!
hackerpower said:
Flash latest CN 23S modem, fp problem bye bye!
Click to expand...
Click to collapse
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
bolof2 said:
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
Click to expand...
Click to collapse
glad I could help!
how do we flash modem only? i want to try the 23s china modem
updiliman said:
how do we flash modem only? i want to try the 23s china modem
Click to expand...
Click to collapse
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Moon75 said:
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Click to expand...
Click to collapse
Flashed the 023S modem and BAM! it works!!! Thanks a lot!
For me, I found flashing the dev 66 modem fixed this wake problem.
When I was On android 7.0 every thing was working after updating to 7.1.1 wifi and bluetooth stoped working ...
I searched every where but did not find solution
Now again an OTA update came and after updating problem is still there ..
Anyone who had a luck to solve this issue ..
Please Guide me .
Help please
malkuu said:
When I was On android 7.0 every thing was working after updating to 7.1.1 wifi and bluetooth stoped working ...
I searched every where but did not find solution
Now again an OTA update came and after updating problem is still there ..
Anyone who had a luck to solve this issue ..
Please Guide me .
Click to expand...
Click to collapse
I have the same problem
i found, in the app "device help" especifictly in hardware tests when the wifi connect and show connected but without internet, in this part of test show MAC 02:00:00:00:00
nintai said:
I have the same problem
i found, in the app "device help" especifictly in hardware tests when the wifi connect and show connected but without internet, in this part of test show MAC 02:00:00:00:00
Click to expand...
Click to collapse
Many of us has this problem but no one had luck to solve this problem ?
Reply
malkuu said:
Many of us has this problem but no one had luck to solve this problem
Click to expand...
Click to collapse
My model is XT1650-03 in phone status, i had build number NPLS26.118-20-5-3 Android Version 7. 1. 1 with this my wifi no works but my Bluetooth works
so i re install with previous build number NPLS26.118-20-5 same Android Version 7. 1. 1 and for few days the wifi works but not bluetooth until the day by OTA update to build number NPLS26.118-20-5-3 and few days after suddenly the wifi no works but my Bluetooth works.
i will try re install with build number NPLS26.118-20-5 and check if works, after that i update in the post. :fingers-crossed:
i can`t put links to the screenshots :crying:
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! )
the same problem
i have the same problem in my moto z xt1065-05 , wlan MAC is 02:00:00:00:00,bluetooth is working.
i have the same problem in my moto z xt1065-03 bluetooth not work after n 7.1.1 but wifi work fine how can i fix this ?
You need a motherboard replacement.
If your phone is still covered by warranty, you can send it to a Motorola repair center to have it fixed (and wait 2 or 3 months).
Drx86 said:
You need a motherboard replacement.
If your phone is still covered by warranty, you can send it to a Motorola repair center to have it fixed (and wait 2 or 3 months).
Click to expand...
Click to collapse
I am fed up with this phone ?
And my phone is not under warranty ?
nintai said:
My model is XT1650-03 in phone status, i had build number NPLS26.118-20-5-3 Android Version 7. 1. 1 with this my wifi no works but my Bluetooth works
so i re install with previous build number NPLS26.118-20-5 same Android Version 7. 1. 1 and for few days the wifi works but not bluetooth until the day by OTA update to build number NPLS26.118-20-5-3 and few days after suddenly the wifi no works but my Bluetooth works.
i will try re install with build number NPLS26.118-20-5 and check if works, after that i update in the post. :fingers-crossed:
i can`t put links to the screenshots :crying:
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! )
Click to expand...
Click to collapse
I have tried flashing modem also but it did'nt work
Have tried many things but no luck till now
malkuu said:
I am fed up with this phone
And my phone is not under warranty ?
Click to expand...
Click to collapse
Then there is no solution.
Mine is still under warranty, I sent it to Motorola two months ago, and they have NOT fixed it yet.
I will NEVER buy another Moto again.
I had this problem with wifi (mac 02:00...) and it came out to be a 100% software problem. I got it as a result of unsuccessful BL unlock, twrp, then root... Finally I decided to get back to locked BL and stock ROM. And "voila!" my wifi is back and is fully functional...
Very Well
chegemli said:
I had this problem with wifi (mac 02:00...) and it came out to be a 100% software problem. I got it as a result of unsuccessful BL unlock, twrp, then root... Finally I decided to get back to locked BL and stock ROM. And "voila!" my wifi is back and is fully functional...
Click to expand...
Click to collapse
Congrants :good:
That is a great new for all of us (if the cause is the same of course).
now the big question, how did you do it?. You could be a little more specific please.
1. what stock frimware you used?
I try whit this (XT1650-03_GRIFFIN_RETAIL_7.1.1_NPLS26.118-20-5-3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) this because the build number of my moto z in this moment is NPLS26.118-20-5-3 but i dont sure.
The Frimware i got it from this web https: //mirrors.lolinet.com/ firmware/moto/griffin/official/RETUS/
2. You previous version ROM ( 7.1.1. ) of android corresponse to the new version stock (7.1.1.) you used to flash or are diferents ??.
3. The Build Number Version was equals?
Thanks for your time!!
i got it fixed when i formatted my cell from recovery now wifi is working but bluetooth is not so definitely its not the hardware issue its only related to software
I have a similar problem with wifi (and hotspot) in my Moto Z. Wifi MAC is 02:00:00:00:00:00.
The battery is also drained really quick - it lasts only 1 day.
The problem occurred a few days ago without any good reason - I did not update nor install anything lately. I tried wiping cache - no success.
edit:
MAC has returned to normal, bluetooth is working.
Wifi still does not find any networks.
My battery mod does not charge the phone - I have no idea why
LitD said:
I have a similar problem with wifi (and hotspot) in my Moto Z. Wifi MAC is 02:00:00:00:00:00.
The battery is also drained really quick - it lasts only 1 day.
The problem occurred a few days ago without any good reason - I did not update nor install anything lately. I tried wiping cache - no success.
edit:
MAC has returned to normal, bluetooth is working.
Wifi still does not find any networks.
My battery mod does not charge the phone - I have no idea why
Click to expand...
Click to collapse
How did you got it back ? Explain something
I did not get it back - wifi still does not work, only MAC returned to normal.
I did not do anything special - just discharged and recharged the phone a few times.
Yesterday I reflashed the kernel (latest TurboZ), wiped cache and power drainage has returned to normal, but MAC is again 02:00:00:00:00:00. No idea why.