Hello everyone,
at first - best ROM I ever tried!
Just one big problem for me:
When the screen is off (sleep mode), I CAN NOT unlock the phone with fingerprint - during first 5 seconds - when display is off, it works. I have to turn on display with power button and AFTER that I CAN unlock with fingerprint with no problems. I want to unlock my phone with fingerprint when the display is off even more than 5 seconds.
Is there a solution?
In stock ROM (16s International) everything works perfect, there were no time limitation. Fingerprint worked everytime even when screen was off for 10 minutes for example.
Where is the problem? It is no hardware problem for sure.
Someone said to use the same finger 3 times instead of 3 different fingers. Try it. It may solve your problem.
I am using the same ROM without the problem which you experienced although sometimes it took more than a second or required a couple of taps on the sensor to unlock the screen.
Go to settings, battery, power saving managements and see if the Ultra Long Standby During Sleep is turned ON. I have that disabled.
Edit. Sorry, I thought that you had the manufacturers' ROM. I had the factory ROM.
I have the same 3 fingerprints for better recognition for sure, but this tip did not help me.
Also I tried to turn off the Long sleep too, did not help to solve this.
Any other ideas @madsurfer1? With screen ON works flawlessly.
Hi guys
I'm experiencing exactly the same issue with my fresh received x829. Haven't tried much on stock ROM but apparently everything was working. Then I flashed AOKP and lignage os v13, and with both the fingerprint only works in the 5 seconds after screen off. And when I mean works, I mean detect a finger, if it's the good one unlocks and if not shows an error. After 5 seconds, the phone shows nothing at all, no unlock and no error.
Have you had any success since these posts ?
Regards
AOKP on my x829 has fingerprint "working" from sleep. It sometimes takes a while or multiple attempts though.
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
same problem
bolof2 said:
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
Click to expand...
Click to collapse
hi
i have the same problem with most of the roms,
is there any solution?
My solution was full wipe, including internal storage. After than clean install ROM. With these steps fingerprint begin works even in deep sleep mode.
Keep in mind that Max 2 has very bad fingerprint at all on every model compared to premium brands. It is slow and sometimes react after few attemps. But works.
If theese steps wont help you - proove claim to the seller of your mobile.
If fingerprint is your priority, I strongly recommend another model, except Le Max 2. Maybe Le Pro is now better with fingerprint.
Try it and let us know.
https://forum.xda-developers.com/showthread.php?t=3408395
Flash latest CN 23S modem, fp problem bye bye!
hackerpower said:
Flash latest CN 23S modem, fp problem bye bye!
Click to expand...
Click to collapse
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
bolof2 said:
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
Click to expand...
Click to collapse
glad I could help!
how do we flash modem only? i want to try the 23s china modem
updiliman said:
how do we flash modem only? i want to try the 23s china modem
Click to expand...
Click to collapse
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Moon75 said:
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Click to expand...
Click to collapse
Flashed the 023S modem and BAM! it works!!! Thanks a lot!
For me, I found flashing the dev 66 modem fixed this wake problem.
Related
Guys maybe you can help me, my phone is behaving very strange. It is a Tianhe H920+ with 4gb ROM, identical with Mlais MX58 Pro, Auxus Nuclea N1 and others.
Roms for Auxus Nuclea N1 are working perfectly, but, first of all i have problems with the rear camera, i am not getting any error messages, but just only the front camera is working and the switch camera option is missing, after i install some third party camera app it freezes.
Phone was suited with Tianhe ROM, build march 2014, for sure i made backup. What i have found out, when i flash the original BOOT.IMG, camera works fine, but the old kernel will be installed. I have unpacked it, checked also init, init.project files, they are totally the same, no change there, just the Zimage differs / Kernel.
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware, but like i already mentioned rear camera is not working with other kernels, all other functions are ok. Is there any possible solution? Framework fix or something please?
Till now i have tried almost 10-15 roms, from MX58 Pro, Star, Tianhe, but non of them is suited with a kernel with working rear camera :crying:. Thank you very much.
Heyy delltech1.. I've also facing similar issue...have you found any solution to your problem?
Tianhe H920+ Wake up issue
delltech1 said:
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware
Click to expand...
Click to collapse
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Tianhe
Eleichstetten said:
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Click to expand...
Click to collapse
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
delltech1 said:
Before you will flash it, take the PRELOADER file from a good known working rom and replace it.
Click to expand...
Click to collapse
Could you recommend a good preloader?
Tianhe
Eleichstetten said:
Could you recommend a good preloader?
Click to expand...
Click to collapse
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Camera still not working
delltech1 said:
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Click to expand...
Click to collapse
I have tryed all roms from needrom and pandavile..nothing.
Now I tried the ROM that was offered in the Pandawill Forum for 8GB Version.
This ROM does include a working preloader (maybe has been changed?)
Anyway, when I flash this ROM, it works, but problems persist.
No change.
CWM 8gb ver. ROM
HI guys, Please could some one upload the 8GB rom flashable with CWM recovery I can not do it with flashtools my usb conenctor is damaged...
PLEASE HELP and save my ass I am starting to be despaired with this phone
THANK YOU for any support and have a nice day
Modified version of Note 3 yasuu ROM.
Just for the case that someone do not know how to replace boot.img (kernel 2014) and replace camera drivers I am uploading modified version of Note 3 yasuu ROM.
No flickering screen,No back camera bug or green camera,No unlock freez yet.
Only bad thing is battery usage, maybe because my USB connector is damaged.I do not know try it out and share your results about the baterry please.
LINK (CWM zip file) :
mediafire.com/download/v3n65fltmwka52z/ROM_NOTE3_Kernel_2014_H920+.+Cam.Drivers.HanyxX.zip
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
OK, Gave it a second try. This time without trying to root.
Well, the wake up issue does not exist anymore.
Unfortunately, it´s just because the phone does not start to Deep Sleep anymore.
It reduces processor rate, but does not start Deep Sleep.
That´s the cause for higher battery consumption.
By the way:
- The package of my phone is not labeled "Tianhe", but "CGC".
- Both cameras did work with this Rom.
- My phone has 8GB of memory and stock ROM is 03/2014
Hello
Eleichstetten said:
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
Click to expand...
Click to collapse
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
I did reset my phone with this firmware from Pandawill Forum (8GB version). The firmware is for H920+ that are produced after March 2014.
It seems, that there has been a change of camera hardware.
http://www.pandawillforum.com/showthread.php?25569-ROM-ROM-for-Tianhe-H920&p=136188&viewfull=1#post136188
This seems to be real stock.
If your phone is produced after March, 2014 and this firmware does not solve the problem, there is a high probability that it is defective.
How to find out?
How can i find out what is the date manufacture of my phone?
about Tianhe H920+ turbo /pandawill/, rear camera problems
validoican said:
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
Click to expand...
Click to collapse
Hello,
After trying all firmwares from panda and needrom i find that there is a hardware problem. BAD CONNECTION between board and camera conector!
Try to open the phone and press firmly camera connector to the board. Then put above something thick 1 mm (non metal) to hold the connector in same position.
It's worked fine for me. Good luck to you!:good:
delltech1 said:
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
Click to expand...
Click to collapse
How do you unbrick your phone... ??? Please advise !!!
I encountered this problem about 2 weeks ago
I have flash every ROM (Official, MIUI based custom ROM, and AOSP) including in fastboot mode
and only CM12.1, CM13 and RR survived from random reboot
I won't use both CM13 and RR because its RIL
Now i used CM12, but I have super fast draining battery
My phone will die, even in standby, because Android OS and System used battery more than SOT
When I checked it, the CPU always stay awake and won't enter deep sleep, so my phone always went heating even in standby (screen turned off)
The only problem I would fix is the random reboot issue when I used MIUI and other Custom ROM I had mention above
This is driving me crazy. Does it hardware problem or something?
If not, how to fix fast draining battery from CM12.1?
Sorry for my bad english
putrairlangga said:
I encountered this problem about 2 weeks ago
I have flash every ROM (Official, MIUI based custom ROM, and AOSP) including in fastboot mode
and only CM12.1, CM13 and RR survived from random reboot
I won't use both CM13 and RR because its RIL
Now i used CM12, but I have super fast draining battery
My phone will die, even in standby, because Android OS and System used battery more than SOT
When I checked it, the CPU always stay awake and won't enter deep sleep, so my phone always went heating even in standby (screen turned off)
The only problem I would fix is the random reboot issue when I used MIUI and other Custom ROM I had mention above
This is driving me crazy. Does it hardware problem or something?
If not, how to fix fast draining battery from CM12.1?
Sorry for my bad english
Click to expand...
Click to collapse
hello I would like to know if you solved because I have a very similar problem to your......
If it's down to some ROMs being a WIP then perhaps the best option is to go back to stock?
Sent from my Redmi Note 3 using XDA-Developers mobile app
samanderson said:
If it's down to some ROMs being a WIP then perhaps the best option is to go back to stock?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
the problem is only present in rom stock because it seems to work just a core of 6 and do not know how to solve
HydroAG said:
hello I would like to know if you solved because I have a very similar problem to your......
Click to expand...
Click to collapse
No, I haven't have you?
samanderson said:
If it's down to some ROMs being a WIP then perhaps the best option is to go back to stock?
Click to expand...
Click to collapse
I just tried Flash Official ROM via Fastboot (MiFlash) but my problem still exist like I mentioned above
HydroAG said:
the problem is only present in rom stock because it seems to work just a core of 6 and do not know how to solve
Click to expand...
Click to collapse
but why it didn't happen before?
I often wipe and flash my device, does it caused the problem?
Hi, i'm having the same issue as yours, have you try to send for repair? Xiaomi centre at my place refuse to repair it as mine from china set, any luck at your place?
Edit- mine was unlocked officially, don't think it related to this issue as it was working without any problem previously,the last thing i did before this happened was making a call in lte before it turned off suddenly, then heat up a lot and keep on rebooting,
asared89 said:
Hi, i'm having the same issue as yours, have you try to send for repair? Xiaomi centre at my place refuse to repair it as mine from china set, any luck at your place?
Edit- mine was unlocked officially, don't think it related to this issue as it was working without any problem previously,the last thing i did before this happened was making a call in lte before it turned off suddenly, then heat up a lot and keep on rebooting,
Click to expand...
Click to collapse
No I could not solve, even to me has happened after a call was 7.2 on global you?
I live in Italy therefore it is difficult to send it to a service center
HydroAG said:
No I could not solve, even to me has happened after a call was 7.2 on global you?
I live in Italy therefore it is difficult to send it to a service center
Click to expand...
Click to collapse
I'm on aosp when this happened, maybe it is hardware related,
Will try to send it to repair shop nearby and hope they can do something about it, it's only a month and now it's completely unusable, maybe just a bad lemon unit
Same problem here...I bought this phone from China and it worked fine for 10 days...Suddenly it begun to rebooting every 20-30 seconds, i can't do anything in the phone...
I managed to flash it with other roms and the problem remains...
I am absolutly disgraced for this....I loved this phone, it lasted only ten days....
Rofellos_Chile said:
Same problem here...I bought this phone from China and it worked fine for 10 days...Suddenly it begun to rebooting every 20-30 seconds, i can't do anything in the phone...
I managed to flash it with other roms and the problem remains...
I am absolutly disgraced for this....I loved this phone, it lasted only ten days....
Click to expand...
Click to collapse
where did you buy it?
xGiorgos said:
where did you buy it?
Click to expand...
Click to collapse
Goldway store, aliexpress...I am still in the protection period so i think it won't be difficult to obtaining a refund...But still i prefer to fix it...
I think is a hardware problem though...i think it has something to do with the energy or temperature managment or circuitry...
Rofellos_Chile said:
Goldway store, aliexpress...I am still in the protection period so i think it won't be difficult to obtaining a refund...But still i prefer to fix it...
I think is a hardware problem though...i think it has something to do with the energy or temperature managment or circuitry...
Click to expand...
Click to collapse
Should be hardware problem and there's nothing we could do i guess, there's a few people affected already.. problem with this model and we're the first.. so sad. Luckily my nexus 5 still going strong despite the screen shattered, even can see the circuit inside, showed the difference between brands quality.
Did someone with this problem can Instal CM13 ROM with fingerprint compatible?
because mine always stuck in Mi Logo and then can't enter TWRP until it re-unlocked and back to MIUI with Mi flash to able flash TWRP)
If not flash fastboot MIUI, the TWRP can't be installed even the phone have unlocked
WTH is going on with my phone
putrairlangga said:
Did someone with this problem can Instal CM13 ROM with fingerprint compatible?
because mine always stuck in Mi Logo and then can't enter TWRP until it re-unlocked and back to MIUI with Mi flash to able flash TWRP)
If not flash fastboot MIUI, the TWRP can't be installed even the phone have unlocked
WTH is going on with my phone
Click to expand...
Click to collapse
It is almost ending its lifespan, I presume.
Unlock, twrp and flash cm. if all else fails, go to Service Center
Sent from my Unlocked kenzo, the power unleashed
any news with that issue?
cause of what i understood , there is a bug hardware isuue with Charging Controller on Xiaomi Redmi Note 3 pro ,
and hardware must be repaired....
Try flashing global stable through MiFlash and tick the option flash all or equivalent.
Ivanlai said:
Try flashing global stable through MiFlash and tick the option flash all or equivalent.
Click to expand...
Click to collapse
Thanks Ivanlai,
What Exactly do you mean by your answer?
did you had this Problem on your Xiaomi Device?
had you manage succesfuly solving it?
my device is new and i dont want to do something that will harm the Warrenty.
I haven't had this situation exactly, but the reason I said to tick flash all is because I have bricked and bootlooped my device before.
By ticking the flash all option, it reduces the risk of some remnants of the previous ROM causing conflict.
Also, I tried several different global stable ROMs before I successfully unbricked my device.
As for warranty, I remember someone mentioning that a xiaomi customer service operator emailed them saying that rooting and flashing custom ROM would not void the warranty, but I would email them again on this issue just to make sure.
Ivanlai said:
Try flashing global stable through MiFlash and tick the option flash all or equivalent.
Click to expand...
Click to collapse
Ivanlai said:
I haven't had this situation exactly, but the reason I said to tick flash all is because I have bricked and bootlooped my device before.
By ticking the flash all option, it reduces the risk of some remnants of the previous ROM causing conflict.
Also, I tried several different global stable ROMs before I successfully unbricked my device.
As for warranty, I remember someone mentioning that a xiaomi customer service operator emailed them saying that rooting and flashing custom ROM would not void the warranty, but I would email them again on this issue just to make sure.
Click to expand...
Click to collapse
Thanks Ivanlai,
very strange what happening to my device.
reboots stopped (have no idea of what reason : recharge again from 5% battery, get into test mode (push 3 button for 10 sec': vol+, vol-, power).
but now other issue showed up : very lots of screen glitches, can use the phone like this, like some bad soldering inside.
first time i got into test mode, there were also screen glitches,
but now, whenever i get into test mode, downloading mode or the 3rd mode (with phone and cable picture), there is not glitchs at all,.
but after phone is starting - lots of screen glitches !!
i am lost
I also bought my Redmi 4 Prime from goldway store, do you know what is their return policy like?
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
I have the exact same problem, tried resetting everything, I suspect it is a hardware problem.
awedxz said:
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
Click to expand...
Click to collapse
Try updating, I had this issue with custom ROM's something certain boot images have this bug.
I flashed a new boot image and bug was gone but had no wifi reverted back to latest global stock via MiFlash.
If you have TWRP try the ROM here https://xiaomi.eu/community/threads/6-7-7-11.32639/ it seems ok.
Did anyone find a fix for this issue. I have the same problem. Battery percentage shows negative 2% and I can't get into recovery because of that. When I press Power and Volume + It shows the battery icon in red and won't let me into recovery. I have the Redmi Note 3 Pro Snapdragon version.
I tried flashing a couple of ROMs via MiFlash with no positive results.
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
What rom are you using?
EkiFox said:
The camera fix works only with Santosh's CM13, not with other CM/AOSP roms
the new kernel Radon V1.8 by Umang96 does not fix the battery problem
Click to expand...
Click to collapse
The Radon V1.8 Kernel actually causes this bug on MIUI based roms, so don't flash the kernel.
Radon Version 1.9 will resolve the battery bug on MIUI and other roms.
Talking about cm/aosp I tried almost all combination kernel/rom.
No success except for this particular cm with camera patch.
Same problem with battery, showing -2% but phone is working... Plz provide solution asap
If u run MIUI, just download FASTBOOT ROM, restart phone to FASTBOOT MODE and flash ROM using this tool. But if u run custom ROM just flash custom kernel (like RADON).
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
Fixed the -2% Bug on latest CM13-Snapshot for me!
You Sir are awesome
flashed the latest global firmwareware(not developer one) solved my issue, also now my phone updates OTA.
Use only the official rom. custom that sellers flash usually is a junk just with additional options for menu's language!
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Geeta_ghai said:
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Click to expand...
Click to collapse
Flash the latest miui ROM in edl mode using miflash. That is the answer.
No
No that is not the answer it's a hardware issue short circuit in motherboard
induna said:
Flash the latest miui ROM in edl mode using miflash. That is the answer.
Click to expand...
Click to collapse
androidnandroid said:
No that is not the answer it's a hardware issue short circuit in motherboard
Click to expand...
Click to collapse
Hmm, well flashing an official ROM in edl mode has fixed this problem for many people, including myself. So it would seem that in most cases at least it IS a software issue that can be fixed by flashing.
My phone came from Banggood and a vendor ROM that wouldn't even support my FP reader, Goodix, and which booted up with the -2% battery bug out of the box. Flashing the official global stable ROM, 8.0.2.0 at that time, fixed all of the issues.
Hmmm may be sir but that doesn't seem to fix mine although mine is from xiaomi only and the problem came after using 6 month suddenly without any reason one morning
Ok guys there are 2 solutions to this problem one is drain your battery and don't charge it for 2 3 days drain it like he'll coz after switch off still some juice is left you have to drain completely and other rapid method is open your redmi note 3 and disconnect battery cable and reconnect it... The problem is not software its hardware where battery reading stuck at minimal which is - 2 ... Thinking minus two hours coz at zero still some battery left for edl and fastboot mode time and alarm... Fixed my redmi note 3 hope it will help you.. Coz tried all method format... 10 times flash all roms through fastboot mode Coz updater mode won't work coz of low battery reading... Enjoy guys
I am having a same issue with redmi note 3 SD version. Tried everything Global BETA ROM, STABLE ROMs but didnt solved my issue. Showing -2% bettery in every ROM which i have flashed.
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
razy111 said:
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
Click to expand...
Click to collapse
I had the exact same problem like this one on xiaomi redmi note 3 pro sd. I tried flashing fastboot miui 10 official but the problem still there. I also tried changing the usb charging port but still the same. I tried plug in the charger and hold power and + volume and it stuck at mi logo.
I want to know if anyone fix this?? Please help.
Hi everyone, I'm facing a severe issue with my Redmi Note 3 (Snapdragon variant).
Few days ago I noticed that the screen wasn't auto-rotating anymore, but I tought it was a temporary problem of my ROM (AICP official, latest nightly), so I passed by.
Yesterday I tried to format the phone from recovery and reinstall the ROM, without luck, the rotation wasn't working.
Then I tried to reset to the fastboot ROM (MIUI 7 6.3.17) through Mi Flash, I booted, and... now EVERY sensor has stopped working. Phone doesn't rotate, in cardboard app it doesn't move, brightness does not adjust automatically, screen doesn't turn off during call when putting the phone on the ear, and the compass is not working.
Also, apps like Lux say the value is -1 everytime, apps to re-calibrate the proximity sensor crash at startup, and I have a Settings force close when I enter security options to set up my fingerprint (only in CM13, from the MIUI7 setup I can register my fingerprint)...
So, I unlocked the bootloader then I tried to install MIUI8 but, IMEI was modified and WiFi wasn't working. I installed CM13 and restored NVRAM and everything (apart from the sensors) was working.
Now I re-flashed again with Mi Flash, and I can't SETUP the phone, because WiFi and cellular data are not working, and the phone is matched with my Mi account, and won't activate without login.
How can I fix all this mess? If needed, I can also take apart the phone.
Please, everyone, this is very urgent!
Thank you all in advance, and sorry if there are errors, as I'm writing this quickly.
HELL YEAH!
Ok, everyone, nevermind.
I FIXED IT!
It was the persist image that was corrupted. My bad I tought Mi Flash would reset everything, even persist. But I wasn't right.
I looked into the "flash_all.bat" script and "flash persist" wasn't there. Thanks Xiaomi for the headache.
2 days of searching on Google and I didn't find this thread, and I don't know how this is possible.
Now I just have to understand why this happened totally random.
Everyone that has this problem, refer to the thread up here, works like a charm!
Bye!
Thanks for sharing your solution. I learned something new.
Guys i have the same problem with my Redmi Note 4 when i rooted it successfully its sesor didn't work but after unrooting it again works well. So is there is any way to root the device without sensor fail???
SayanKar said:
Guys i have the same problem with my Redmi Note 4 when i rooted it successfully its sesor didn't work but after unrooting it again works well. So is there is any way to root the device without sensor fail???
Click to expand...
Click to collapse
Which root solution are you using?
SayanKar said:
Guys i have the same problem with my Redmi Note 4 when i rooted it successfully its sesor didn't work but after unrooting it again works well. So is there is any way to root the device without sensor fail???
Click to expand...
Click to collapse
Have you tried rooting with magisk?
J3is said:
Ok, everyone, nevermind.
I FIXED IT!
It was the persist image that was corrupted. My bad I tought Mi Flash would reset everything, even persist. But I wasn't right.
I looked into the "flash_all.bat" script and "flash persist" wasn't there. Thanks Xiaomi for the headache.
2 days of searching on Google and I didn't find this thread, and I don't know how this is possible.
Now I just have to understand why this happened totally random.
Everyone that has this problem, refer to the thread up here, works like a charm!
Bye!
Click to expand...
Click to collapse
Hi, the thread has been removed. Can you relink it?
Thanks a lot!!
J3is said:
Ok, everyone, nevermind.
I FIXED IT!
It was the persist image that was corrupted. My bad I tought Mi Flash would reset everything, even persist. But I wasn't right.
I looked into the "flash_all.bat" script and "flash persist" wasn't there. Thanks Xiaomi for the headache.
2 days of searching on Google and I didn't find this thread, and I don't know how this is possible.
Now I just have to understand why this happened totally random.
Everyone that has this problem, refer to the thread up here, works like a charm!
Bye!
Click to expand...
Click to collapse
This tip helped me fix my device after an year!!
Hello!
I recently bought a Snapdragon Redmi (kenzo), it came with a chinese version of MIUI and on the first setup it already started to show some problems: when I try to connect to my google account it suddently rebooted. After some tries and reboots and worked but on day by day usage I continue to have random reboots and apps crashing.
I already updated to other miui versions, CM13, CM14 and some others roms and kernels, flashed with diferent TWRP versions, in all of them I got the same problem.
I think it's also not related to hard usage, because the problem appear when I open what's app, facebook, a lot of times with swiftkey. And I can open some heavy games without problems.
Also, sometimes it reboot and get stuck on a bootloop, when this happen, a backup restore or dirty flash wont solve the bootloop and I always need to go on TWRP, do a factory reset and flash the rom again.
I think the explain it's a hardware defect...
There are any other thing I can try to solve it?
Try flashing fastboot ROM if you didnt yet
Denis:) said:
Try flashing fastboot ROM if you didnt yet
Click to expand...
Click to collapse
I already tried once with miui, but I can try again with other ROM. Which one do you sugest?
You can only flash MIUI fastboot ROM via MiFlash, not possible to flash other...it must be a hw problem if you encounter that on every ROM...
Try flashing the developer ROM. Or look for similar issues on MiUi forum. Those guys will surely help you out!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
software problem not hardware, flash fastboot rom
any news with that issue?
cause of what i understood , there is a bug hardware isuue with Charging Controller on Xiaomi Redmi Note 3 pro ,
and hardware must be repaired....
iTaisHi said:
any news with that issue?
cause of what i understood , there is a bug hardware isuue with Charging Controller on Xiaomi Redmi Note 3 pro ,
and hardware must be repaired....
Click to expand...
Click to collapse
I sent the phone back to the store and they will refund me.
pituca292 said:
I sent the phone back to the store and they will refund me.
Click to expand...
Click to collapse
thanks pituca292,
i thing that would be no option for me,
i bought the device abroad, would be not economic for me to return it.
very strange what happening to my device.
reboots stopped (have no idea of what reason : recharge again from 5% battery, get into test mode (push 3 button for 10 sec': vol+, vol-, power).
but now other issue showed up : very lots of screen glitches, can use the phone like this, like some bad soldering inside.
first time i got into test mode, there were also screen glitches,
but now, whenever i get into test mode, downloading mode or the 3rd mode (with phone and cable picture), there is not glitchs at all,.
but after phone is starting - lots of screen glitches !!
i am lost