Need some help. Looks like I'm getting charging issue that happens when you have ICS on here. So my touchpad wouldnt not boot.... I was able to get it to boot after a lot of playing around! Next i hear i need to have JC Sullins charger fix installed but i can't find it.... all the downloads are "no longer there" so if someone could show me where i could download that would be sweet so this doesnt happen again.
What ics rom are you running?
sstar said:
What ics rom are you running?
Click to expand...
Click to collapse
Butta HD
Unfortunately that is one rom I haven't tried but I haven't had problems with OaT's or the latest nightly which I'm back on .I did find something called TPCharge Test -v1.0 by JC Sullins here is a link https://www.box.com/shared/yme3mqk4bvbog4zyms2d .
Haven't tried as I don't have a problem.
And a direct link to JC Sullins files http://goo.im/devs/jcsullins/cmtouchpad
sstar said:
What ics rom are you running?
Click to expand...
Click to collapse
sstar said:
Unfortunately that is one rom I haven't tried but I haven't had problems with OaT's or the latest nightly which I'm back on .I did find something called TPCharge Test -v1.0 by JC Sullins here is a link https://www.box.com/shared/yme3mqk4bvbog4zyms2d .
Haven't tried as I don't have a problem.
And a direct link to JC Sullins files
Click to expand...
Click to collapse
k cool, im going to flash nightly when I have a full charge on it Thanks for the help, sure has been a pain but I'm glad its fixed
joshuadjohnson22 said:
k cool, im going to flash nightly when I have a full charge on it Thanks for the help, sure has been a pain but I'm glad its fixed
Click to expand...
Click to collapse
The charging fix you request is incorporated into the later CM9 nightly and the patch itself is no longer in jcsullins archive on goo.im: http://goo.im/devs/jcsullins/cmtouchpad
In /apps/ you will see TPChargeTest - a utility i use to check rate of charge/max charge.
Test patches are in /testing/ - once added to the nightly, they are removed. The charging fix is no longer there. You'll need the latest nightly for that.
I'm on nightly 0903 and have my best charge/drain performance to date of any nightly.:good:
Related
Anybody else having issues with Gmail working on the 8/19/12 Nightly build? The Play Store won't even show Gmail to download. After flashing latest nightly I then flashed gapps from 4/29 which is the latest I believe.
drt054 said:
Anybody else having issues with Gmail working on the 8/19/12 Nightly build? The Play Store won't even show Gmail to download. After flashing latest nightly I then flashed gapps from 4/29 which is the latest I believe.
Click to expand...
Click to collapse
Working fine for me. Try the Gapps fixer utility. Do a search, it's here, somewhere.
chicle_11 said:
Working fine for me. Try the Gapps fixer utility. Do a search, it's here, somewhere.
Click to expand...
Click to collapse
drt054
I noticed you thanked chicle_11 does that mean it fixed your problem?
If so do you have link for gapps fixer. Just in case I should ever need it.
Thanks
Not yet.. Just thanked for the suggestion. Once I get back to my touchpad will give it a try.
sent from my CM9-kanged HTC ReZound
Even though I changed different LCD densities I used dalingrins 120 fix now and it is working.. thx
Sent from my cm_tenderloin using Tapatalk 2
sstar said:
drt054
I noticed you thanked chicle_11 does that mean it fixed your problem?
If so do you have link for gapps fixer. Just in case I should ever need it.
Thanks
Click to expand...
Click to collapse
Here's the link to the Gapps fixer utility : http://forum.xda-developers.com/showthread.php?p=28031262#post28031262
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
asawi said:
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
Click to expand...
Click to collapse
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
I haven't had one single unwanted reboot in the year I've had it installed. Go figure! Can't say I've noticed any wifi problems either, but then wifi here is not as reliable as I'd want so maybe I just took for granted it was the wifi in the house acting up when it may have been the Tablet.
Sent from my GT-P5210 using Tapatalk 4
pepi4 said:
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
Click to expand...
Click to collapse
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
digixmax said:
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
Click to expand...
Click to collapse
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
pepi4 said:
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
Click to expand...
Click to collapse
Just use recovery to back up your current CM10.0 before flashing CM11, that way you can revert back to CM10.0 if need be without any sweat.
To flash CM11, you'll need to use CWM 6.0.4.5 (or TWRP 2.6.3.1) or later version; see http://forum.xda-developers.com/showpost.php?p=49024436&postcount=105 and http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8 on how to create flashable recovery zip to update recovery in emmc.
Be aware that CM11 sometimes randomly fails to boot (or reboot), see http://forum.xda-developers.com/showpost.php?p=49082178&postcount=131, so don't panic and give up if it fails to boot first time after installation.
I flashe CM11 and it seem to run great. Only problem is ... I can't load a lot of my application from the Play Store. When I try to install I get this error message. "my device isn't compatible". Some will install and others won't?
Went back to 10.0 CM11 has that awful low battery poltergeist thing. Get down to 20n percent battery and the ghost takes over. 10.0 doesnt do this :laugh:
pepi4 said:
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Click to expand...
Click to collapse
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
digixmax said:
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
Click to expand...
Click to collapse
Thanks!
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
Here ya go my friend ...
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
Have fun
[deleted]
deleted
i would also like to endorse this build for a few reasons:
1. super snappy, UI is smoother than 4.2 JB and kitkat
2. the old tablet UI is in this ROM and it's really easy to enable and configure, which is awesome because the old tablet UI is amazing
3. yeah no wifi problems, battery life is pretty solid too from what i've seen.
on cm10.1.3 official, i was getting FC's of the process "com.android.media" on boot. doesn't happen here, i don't think it happened on kitkat either. if you want a really stable tab, flash this build.
Looks like I am taking the wifes Nook back and checking this out!
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Sent from my Nexus 5 using Tapatalk
mpry1 said:
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Click to expand...
Click to collapse
You need to use earlier version of CWM, e.g., 6.0.3.x or 6.0.2.x.
(Alternatively you can replace the update-binary file (in the folder \META-INF\com\google\android\) in the CM10 ROM zip file with its new corresponding version in the CM11 ROM zip file).
good release version?
I'm running this 12/31 build of succulent's and it is indeed quite stable. I noted it is a debug build. I'd assume a release build would be a little quicker & smaller. Is there a release build equivalent to this package? thx!
hi
i have this rom : http://forum.xda-developers.com/showthread.php?t=2462906
ver 2.7.0
with fluid kernel
gps is not working...is there something i can do to make it work?
also, what is DS?
Hey, I can't say that I've had any GPS problems since I don't even use that function, but I believe at one point sada23 had a gps fix for 4.4.2 roms available. You can private message him and see if he still has it. If that doesn't work/he doesn't contact you, I would suggest flashing a different kernel and seeing if it works.
Vesnyx said:
Hey, I can't say that I've had any GPS problems since I don't even use that function, but I believe at one point sada23 had a gps fix for 4.4.2 roms available. You can private message him and see if he still has it. If that doesn't work/he doesn't contact you, I would suggest flashing a different kernel and seeing if it works.
Click to expand...
Click to collapse
thanks
ill msg him
shamanoid said:
thanks
ill msg him
Click to expand...
Click to collapse
No prob. You could also try copying the gps files from the /system/etc directory on his CM11 build into the CyanAOSP build with the same format. Might work if you want a quicker fix.
Also, remember to make a nandroid and wipe before flashing. A reflash would also do you some good if you are still having issues. I've actually built a working version of Dirty Unicorns 5.0 for the Vibrant, but I can't post it because I don't have the post requirements yet. From my test builds, it flies!
Vesnyx said:
No prob. You could also try copying the gps files from the /system/etc directory on his CM11 build into the CyanAOSP build with the same format. Might work if you want a quicker fix.
Also, remember to make a nandroid and wipe before flashing. A reflash would also do you some good if you are still having issues. I've actually built a working version of Dirty Unicorns 5.0 for the Vibrant, but I can't post it because I don't have the post requirements yet. From my test builds, it flies!
Click to expand...
Click to collapse
ill give it a try..since he didnt reply yet
how is the gps on your rom working?
shamanoid said:
ill give it a try..since he didnt reply yet
how is the gps on your rom working?
Click to expand...
Click to collapse
Don't know, I haven't been able to test it. You can flash it right now. It's Dirty Unicorns v5.0 in the dev forums. See if it works any better.
Main thread: OpenPDroid patches for CyanogenMod 11
WARNING: OpenPDroid is not compatible with ART for now. disable ART before flashing. enabling ART will cause the device to fail to boot. if you enabled ART and are unable to boot, flash official CyanogenMod temporarily to be able to fix (will cause privacy leaks). or if you have ADB access in android or recovery, you can disable ART by using setprop or editing a file.
these are i9100 builds of CyanogenMod 11 patched with OpenPDroid. find them here.
update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay.
update: i have published an OpenPDroid overlay for the i9100 build of CM 10.1.3 here (made with old Auto-Patcher).
update: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
note: OpenPDroid does not affect the recovery nor the kernel, you can use whatever you want.
CM11-M6 broke OpenPDroid patches, so i forked OpenPDroid to restore compatibility, fix several bugs and clean up the code. sources are here.
XDA:DevDB Information
CM11-OpenPDroid-i9100, ROM for the Samsung Galaxy S II
Contributors
Lanchon
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2014-07-16
Last Updated 2014-10-08
rom is uploading now, please wait a bit...
Features and screenshots mate
george_shudi said:
Features and screenshots mate
Click to expand...
Click to collapse
lol
google openpdroid and pdroid
Some screenshots and battery life will be welcome.
Thanks, will try soon .
sorry! i just found out that Dropbox suspended my public links due to too much traffic, i didn't know this could happen. i'll arrange an alternative asap.
danielk68 said:
Some screenshots and battery life will be welcome.
Click to expand...
Click to collapse
this is just nightly CM11 with openpdroid! screenshots and battery are exactly like CM's.
mate your roms are not working ,, even ur links are not working anymore.
george_shudi said:
mate your roms are not working ,, even ur links are not working anymore.
Click to expand...
Click to collapse
lol did you even read my previous to last post?
Lanchon said:
lol did you even read my previous to last post?
Click to expand...
Click to collapse
yes i did .. i have downloaded ur roms since today morning and i've flashed them but none of them are working.
george_shudi said:
yes i did .. i have downloaded ur roms since today morning and i've flashed them but none of them are working.
Click to expand...
Click to collapse
ok thanks. i only posted one rom for the i9100. are you sure you didnt flash one of the nexus 5 images? they have hammerhead on the filename.
Lanchon said:
ok thanks. i only posted one rom for the i9100. are you sure you didnt flash one of the nexus 5 images? they have hammerhead on the filename.
Click to expand...
Click to collapse
no hammerhead won't accept to flash ... i've flashed the one one with the date 16/7/2014 and done flashing then reboot but nothing happened just black screen.. i'm using Biftor slim rom now ... i just want to report ur rom to u.
george_shudi said:
no hammerhead won't accept to flash ... i've flashed the one one with the date 16/7/2014 and done flashing then reboot but nothing happened just black screen.. i'm using Biftor slim rom now ... i just want to report ur rom to u.
Click to expand...
Click to collapse
ok thank you. i dont have an i9100 so i can't test. that's why this rom is not in ALPHA but TESTING stage. i pulled the blobs from a non-local friend's phone over VPN and built. but i am running the hammerhead version and it works just fine (and so does openpdroid). i don't know why it may not be working. maybe that CM's nightly is bad. maybe there's something bad with my building (i strongly suppose nothing's wrong with openpdroid). maybe you didn't wipe or the download was busted. (there is *no* need to wipe coming from CM11.) if someone else confirms i will sync and rebuild and maybe build without patching to see if the output works. thank you!
Dropbox error 509
matias6142 said:
Dropbox error 509
Click to expand...
Click to collapse
files are now live again, sorry for the outage!
Lanchon said:
files are now live again, sorry for the outage!
Click to expand...
Click to collapse
images i don't see
new build is up!!!
this time i reproduced the official M8 snapshot, so it should be more stable. enjoy!
Lanchon said:
new build is up!!!
this time i reproduced the official M8 snapshot, so it should be more stable. enjoy!
Click to expand...
Click to collapse
the package is bad.
chuangdi said:
the package is bad.
Click to expand...
Click to collapse
crap!!! can you please describe in more detail?
i don't have an i9100, so i havent tested this build.
EDIT: i had a friend with an i9100 remotely connect to to my VPN, then had him enable root adb over net, then i picked the blobs from his phone with the standard script. there were no errors reported. maybe something went wrong???
2ND EDIT:
i think i know what can have gone wrong. he's running CM but infected's CM10.2 modded build. maybe i need to pick the blobs from someone running standard CM11.
does anybody running "stock" CM11 want to help? i'd need brief remote adb access. i think root is required to pick the blobs, but not sure.
Let us Discuss:
DL links atm:
AOSPA.co Official Download Website
PA Official Mirror Link
Arter97 Mirror Link
Gapps (Optional)
Beans' Gapps
Open Gapps
Paranoid Android Google+
Overall still skeptical about this because of the developments before being left out.
Anyway, what are your thoughts?
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
seangeezy12 said:
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
Click to expand...
Click to collapse
Will you report here? if so, consider this a subscription!
Used PA a few times in the past and it has always been one of the smoothest and best running roms for me, so i'm very interested!
knevelsg-j said:
Will you report here? if so, consider this a subscription!
Used PA a few times in the past and it has always been one of the smoothest and best running roms for me, so i'm very interested!
Click to expand...
Click to collapse
Will do !!
seangeezy12 said:
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
Click to expand...
Click to collapse
The real problem about it is the updates... will it be supported continuously or just 1 month. Considering PA's track records I doubt they will be able to sustain it for long. But I still have my fingers crossed.. Can you please do me a favor and install the HDLR camera zip found in the themes and apps forum in n6p and check if it works? if it does I will be flashing PA right away.
Also @seangeezy122 please do check the kernel and grab a couple of screenies
Thx for the info & links, downloading
Just one question : are gapps included? or should I flash theme?
oussamalabbize said:
Thx for the info & links, downloading
Just one question : are gapps are included? or should I flash theme?
Click to expand...
Click to collapse
It is recommended to flash gapps :good:
phantom146 said:
It is recommended to flash gapps :good:
Click to expand...
Click to collapse
Ok, thx
Are links working mine keeps saying pending?
**ignore**
@chadouming cant wait till you get your hands on their source!
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
it is encrypted or not?
dwxvi said:
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
Click to expand...
Click to collapse
I used beans and it work fine.
It's not on the may updates yet though
dwxvi said:
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
Click to expand...
Click to collapse
No issues with BeansGapps, worked fine from the get go.
So far so good, no issues at least. Will play around for the rest of the day and see how real world usage goes.
galakanokis said:
No issues with BeansGapps, worked fine from the get go.
So far so good, no issues at least. Will play around for the rest of the day and see how real world usage goes.
Click to expand...
Click to collapse
did you use the full or mini gapps package
Flashed the rom with openGapps stock package, working fine for the moment. Looks promising but lacks extra features that other roms such as pure and RR have like hold power for flashlight and down right clear all button.
The MD5 hash for the rom file is CE696A1C396864B23F40A37CF9A4C5D6 if anyone is wondering.
troon95 said:
Flashed the rom with openGapps stock package, working fine for the moment. Looks promising but lacks extra features that other roms such as pure and RR have like hold power for flashlight and down right clear all button.
The MD5 hash for the rom file is CE696A1C396864B23F40A37CF9A4C5D6 if anyone is wondering.
Click to expand...
Click to collapse
Ever since MM PA isnt really about the features but more on the smooth side of the UI and a small handpicked own festures. Thats why before on MM I used some xposed modules to incorporate those small features I miss. Though this lack of features shouldn't be a bother to minimalists like me.
Which gapps beans or banks or open?
And which versions for vendor n2g470?
And where's the official page... Google+?
Flashed...magisk working with safety net