My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
asawi said:
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
Click to expand...
Click to collapse
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
I haven't had one single unwanted reboot in the year I've had it installed. Go figure! Can't say I've noticed any wifi problems either, but then wifi here is not as reliable as I'd want so maybe I just took for granted it was the wifi in the house acting up when it may have been the Tablet.
Sent from my GT-P5210 using Tapatalk 4
pepi4 said:
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
Click to expand...
Click to collapse
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
digixmax said:
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
Click to expand...
Click to collapse
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
pepi4 said:
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
Click to expand...
Click to collapse
Just use recovery to back up your current CM10.0 before flashing CM11, that way you can revert back to CM10.0 if need be without any sweat.
To flash CM11, you'll need to use CWM 6.0.4.5 (or TWRP 2.6.3.1) or later version; see http://forum.xda-developers.com/showpost.php?p=49024436&postcount=105 and http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8 on how to create flashable recovery zip to update recovery in emmc.
Be aware that CM11 sometimes randomly fails to boot (or reboot), see http://forum.xda-developers.com/showpost.php?p=49082178&postcount=131, so don't panic and give up if it fails to boot first time after installation.
I flashe CM11 and it seem to run great. Only problem is ... I can't load a lot of my application from the Play Store. When I try to install I get this error message. "my device isn't compatible". Some will install and others won't?
Went back to 10.0 CM11 has that awful low battery poltergeist thing. Get down to 20n percent battery and the ghost takes over. 10.0 doesnt do this :laugh:
pepi4 said:
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Click to expand...
Click to collapse
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
digixmax said:
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
Click to expand...
Click to collapse
Thanks!
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
Here ya go my friend ...
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
Have fun
[deleted]
deleted
i would also like to endorse this build for a few reasons:
1. super snappy, UI is smoother than 4.2 JB and kitkat
2. the old tablet UI is in this ROM and it's really easy to enable and configure, which is awesome because the old tablet UI is amazing
3. yeah no wifi problems, battery life is pretty solid too from what i've seen.
on cm10.1.3 official, i was getting FC's of the process "com.android.media" on boot. doesn't happen here, i don't think it happened on kitkat either. if you want a really stable tab, flash this build.
Looks like I am taking the wifes Nook back and checking this out!
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Sent from my Nexus 5 using Tapatalk
mpry1 said:
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Click to expand...
Click to collapse
You need to use earlier version of CWM, e.g., 6.0.3.x or 6.0.2.x.
(Alternatively you can replace the update-binary file (in the folder \META-INF\com\google\android\) in the CM10 ROM zip file with its new corresponding version in the CM11 ROM zip file).
good release version?
I'm running this 12/31 build of succulent's and it is indeed quite stable. I noted it is a debug build. I'd assume a release build would be a little quicker & smaller. Is there a release build equivalent to this package? thx!
Related
At the suggestion of some in the CM 10.2 thread, I have created a thread for users to post issues and ask questions pertaining to the CM 10.2 nightly builds. Downloads for the nightly builds can be found in the link below:
CyanogenMod Nightlies
Please remember, this thread is for questions, comments or issues with nightly builds ONLY. For all other builds, use the thread in the link below:
CyanogenMod 10.2 | Original Development
GPS/APN fix. Thanks to Captain Throwback for getting this out:
CM 10.2 GPS/APN fix
:good:
9/9/13 nightly here... Seems GPS won't lock on and I can't mount external SD card storage.
When I try to dirty flash back to the IRC build (8/18 unofficial), I get the Cynogen boot animation spinning forever.
evo newbcake said:
9/9/13 nightly here... Seems GPS won't lock on and I can't mount external SD card storage.
When I try to dirty flash back to the IRC build (8/18 unofficial), I get the Cynogen boot animation spinning forever.
Click to expand...
Click to collapse
I've been running the 9/4 nightly with no GPS problems.
I stopped using USB storage several weeks ago, and switched to MTP mode. CM's MTP is doing transfers much faster than it used to..
evo newbcake said:
9/9/13 nightly here... Seems GPS won't lock on and I can't mount external SD card storage.
When I try to dirty flash back to the IRC build (8/18 unofficial), I get the Cynogen boot animation spinning forever.
Click to expand...
Click to collapse
I don't suggest dirty flashing an older nightly over a new one. A clean install is most likely the fix, unless you have a backup you can restore.
Sent from my EVO using XDA Premium 4 mobile app
JerryGNYC said:
I've been running the 9/4 nightly with no GPS problems.
I stopped using USB storage several weeks ago, and switched to MTP mode. CM's MTP is doing transfers much faster than it used to..
Click to expand...
Click to collapse
I meant the sd card doesnt mount at all (scenario: i go to open waze and it tells me there is no SD card installed). Not just for USB transfers.
I did dirty flash back to 9/4/13 and SD card and GPS are working now. Thanks.
FinZ28 said:
I don't suggest dirty flashing an older nightly over a new one. A clean install is most likely the fix, unless you have a backup you can restore.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yea, I figured a clean flash would resolve, i was just posting my experiences. Thank you.
Same issue here. 9/8 and 9/9 do not recognize SD card. I was using the experimental NO DELAY zip with no issues but I've decided to run RC2 for a while. I have better battery life with 10.1.3
EVOlved human
CM10.2 camera vs Sense
Hi guys. Is there any way to permanently set the exposure to -1? I find that most if not all of the pictures taken on CM10.2 are overexposed, or the white balance is way off. As an example, taking a picture of a lamp in the evening looks like I'm taking a picture of the sun or something. The Sense camera is really the only thing I miss on CM10.2. Any advice on how to make the camera perform better on this ROM?
mhajii210
Just curious if anyone has flashed the 9/10 nightly. Are GPS and SD card still issues?
Flashed the 20130910 nightly. SD card issue resolved but GPS isn't working.
evo newbcake said:
Just curious if anyone has flashed the 9/10 nightly. Are GPS and SD card still issues?
Click to expand...
Click to collapse
9/10 for me kept bootlooping. In fact, it happened when I connected to the PC to move some files over. I'm assuming its still messed up but it could have also been my SD card, because it was wiped and I had to kinda start over.
9/5 would reboot and then stick on the CyanogenMod boot screen.
9/6 - 9/8 wouldn't even boot up at all for me.
9/4 seems to be the most stable one for me.
Anyone have a link for 0904, by chance???
physix said:
Anyone have a link for 0904, by chance???
Click to expand...
Click to collapse
http://goo.im/devs/cm/jewel/nightly/cm-10.2-20130904-NIGHTLY-jewel.zip
Anyone try the 20130911 nightly to see if the GPS issue is resolved?
Anyone have a digital battery mod we can use for this ROM
Naija boi on xda
cm 10.2 IRC
wheeler.sexton said:
Anyone try the 20130911 nightly to see if the GPS issue is resolved?
Click to expand...
Click to collapse
I can't tell but I can tell you that the wifi and hotspot is not.
wheeler.sexton said:
Anyone try the 20130911 nightly to see if the GPS issue is resolved?
Click to expand...
Click to collapse
Darren Orange said:
I can't tell but I can tell you that the wifi and hotspot is not.
Click to expand...
Click to collapse
GPS does not find a lock.
WiFi and Hotspot work fine for me.
Darren Orange said:
I can't tell but I can tell you that the wifi and hotspot is not.
Click to expand...
Click to collapse
I'm not having issues with WiFi or hotspot... ?
mhajii210 said:
Hi guys. Is there any way to permanently set the exposure to -1? I find that most if not all of the pictures taken on CM10.2 are overexposed, or the white balance is way off. As an example, taking a picture of a lamp in the evening looks like I'm taking a picture of the sun or something. The Sense camera is really the only thing I miss on CM10.2. Any advice on how to make the camera perform better on this ROM?
mhajii210
Click to expand...
Click to collapse
Camera quality was improved with the 9/3 build. Have you compared since then?
This is on a build from before 9/3. I think the camera is pretty good myself. It's the 8/30 build.
NaterTots said:
This is on a build from before 9/3. I think the camera is pretty good myself. It's the 8/30 build.
Click to expand...
Click to collapse
Nice mill
Sent from my EVO
I wanted to share this with you all and basically give @patch_Adams a shout out if he's still around. I am still working on the BeanStalk rom also.
@NoSpamDan also needs a shout out for working with me on the skyrocket build. We joined forces and got SlimLP booting before any other builds.
Enuff said, I'm sure you're tired of reading this and want the good stuff?
Code:
I am NOT responsible for sdcard failure, geothermal meltdowns, and bricked devices. This has been tested by me and I would not share if I thought it would harm your device. Please do NOT expect a Daily Driver just yet.
Unofficial_cm-12.0_quincyatt
Try some gapps along with the rom if you'd like. Gapps_here
Code:
INSTALLATION
*MUST perform a FULL WIPE!
*Did you wipe everything EXCEPT the sdcards?
*Flash the ROM
*Let it boot into the OS at least once.
*Flash gapps and enjoy
*Select 780P for video recording.
What works?
*Audio
*Data
*MMS thanks to my Buddy @NoSpamDan
*WiFi
*Camera
*Video recording @780P
*Still testing other features
*Video playback
*HW overlays
What's not working?
*1080P video recording
*RIL? you tell me as I do not have an active sim card.
I feel like I'll be forever grateful for @disconnecktie as he put up with me & my NOOB questions for well over a year now! He is an AWESOME teacher, and friend! @santod040 for his inspiration & perfection in rom building!
Source: CyanogenMod
XDA:DevDB Information
[ROM][ALPHA][Unofficial_CM-12.0][quincyatt][WIP], ROM for the AT&T Samsung Galaxy Note I717
Contributors
gimmeitorilltell, NoSpamDan
Source Code: https://github.com/CyanogenMod,
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-02-07
Last Updated 2015-06-25
USE_ONLY_THIS_UNOFFICIAL_TWRP!!!!!
TWRP 2.8.7.0
Nice work, Tony! You guys here are in good hands!
Install went good, but like others I got no baseband. (it is all about "da base" band) I could not set cpu speeds in performance either.
No such luck, only boot loop. Keep fighting the good fight! @gimmeitorilltell
@gimmeitorilltell is there a way to access your version of the kernel source?
clepperM said:
No such luck, only boot loop. Keep fighting the good fight! @gimmeitorilltell
Click to expand...
Click to collapse
You must wipe clean in recovery, everything except the internal & external sd cards.
Cant wait for next build :good:
NEW BUILD
Fresh build in the OP guys/gals check it out! Themes, power menu, Baseband, & so much more working now! I need to know if the RIL is good or not so let me know? Enjoy!
gimmeitorilltell said:
Fresh build in the OP guys/gals check it out! Themes, power menu, Baseband, & so much more working now! I need to know if the RIL is good or not so let me know? Enjoy!
Click to expand...
Click to collapse
Everything is working stellar except mobile data. Text and call are good. I am on UCMD3 radio.
Sweet build. Restored 34 User Apps with Data....no problems. Have Baseband now, but I don't have a sim card so I can't test data or phone calls.
Sent from my SAMSUNG-SGH-I717 using XDA Free mobile app
gimmeitorilltell said:
Fresh build in the OP guys/gals check it out! Themes, power menu, Baseband, & so much more working now! I need to know if the RIL is good or not so let me know? Enjoy!
Click to expand...
Click to collapse
I dont think Camera is working, tried reflashing it and downloading 3rd party camera apps, it still doesnt work.
everything seems to work perfect hopefully we see more great features on CM12 along the way
Thank you soo much sir
everything seems to be working but mobile data and camera, even the 5 GHz band which i don't know if it was just me but did not seem to work on any other non stock based roms i came across. another thing i noticed is that the play store does not seem to install when i try to flash gapps i've tried the version linked in the description and the version linked on the CyanogenMod web site through two different recoverys
mauser270 said:
everything seems to be working but mobile data and camera, even the 5 GHz band which i don't know if it was just me but did not seem to work on any other non stock based roms i came across. another thing i noticed is that the play store does not seem to install when i try to flash gapps i've tried the version linked in the description and the version linked on the CyanogenMod web site through two different recoverys
Click to expand...
Click to collapse
http://forum.xda-developers.com/and...al-edition-t2943330/post56820635#post56820635
And download the specific Gapps which is >> GApps Minimal Edition 2015-02-12 GPS 434 [240 DPI, armeabi-v7a CPU] (29 MB)
Alright I've posted a new link and the camera should be fixed. Also replaced the gapps link to point to the one posted above for the playstore to work. I would say it might be ok to, cough cough, whisper, dirty flash this. Let this be the only time though. I didn't say that did Ii? lol
gimmeitorilltell said:
Alright I've posted a new link and the camera should be fixed. Also replaced the gapps link to point to the one posted above for the playstore to work. I would say it might be ok to, cough cough, whisper, dirty flash this. Let this be the only time though. I didn't say that did Ii? lol
Click to expand...
Click to collapse
You're a CHAMP
Downloading now
TBH, im not sure if im the only one that has this issue with all 4.4.4 roms but with all 4.4.4 roms I had wake issues where every time I press the power button, it had a delay issue, I literally had to keep pressing the power button for it to wake up. The 5.0 build seems to fix the issue.
Just wanted to put it out there lol.
Thank you again sir.
TeamAndroid14 said:
You're a CHAMP
Downloading now
TBH, im not sure if im the only one that has this issue with all 4.4.4 roms but with all 4.4.4 roms I had wake issues where every time I press the power button, it had a delay issue, I literally had to keep pressing the power button for it to wake up. The 5.0 build seems to fix the issue.
Just wanted to put it out there lol.
Thank you again sir.
Click to expand...
Click to collapse
Well kitkat roms definitely had wake issues with this device for sure so you're one in a million.. Lol It has been fixed in 5.0 for now and the biggest thing we fought was sleeping issues. The device always wanted to reboot every time you turned off the screen or when it timed out. I'm hoping those days stay behind us from now moving forward. So how's the camera now & did you dirty flash it? I'm gonna try the gapps you pointed out since I still don't have the playstore.
I had the Playstore in the last build using Banks minimal. I was able to d/l TiBu and restore my apps.
Sent from my SM-T310 using XDA Premium 4 mobile app
gimmeitorilltell said:
Well kitkat roms definitely had wake issues with this device for sure so you're one in a million.. Lol It has been fixed in 5.0 for now and the biggest thing we fought was sleeping issues. The device always wanted to reboot every time you turned off the screen or when it timed out. I'm hoping those days stay behind us from now moving forward. So how's the camera now & did you dirty flash it? I'm gonna try the gapps you pointed out since I still don't have the playstore.
Click to expand...
Click to collapse
Yeah hope it doesnt do that again, it was a pain lol. Camera works fine , im having screen flickering issues. -_- . I hope theres a something on Xposed framework that can fix this issue. Dont wanna keep going to developers option and enabling hw overlays. Yeah its weird, you have to flash a "certain" gapps, a xda member pointed out this issue on the slimLP forum. im seeing a lot people with other devices are having issues with the gapps also. You should download the gapps and upload it to your AFH.
mobile data not working
Great work. It has not been easy for you to come this far. Thanks a million times! Everything works fine except mobile data. Please try and fix this and it will be my daily driver.
When I try to download cm 12, build 12/26 I get an error message, does anyone have this file? I want to install it instead of 13, since I imagine its more stable. Thank yoy
daxecutioner24 said:
When I try to download cm 12, build 12/26 I get an error message, does anyone have this file? I want to install it instead of 13, since I imagine its more stable. Thank yoy
Click to expand...
Click to collapse
the 404 error? been wondering about that myself... i think i still have a copy of the zip on the phone, but not the recovery (unless it also comes with the CM zip?)
from earlier reading, it sounded like everything before 13 is now abandoned
now even if it's more stable, all the snapdragon camera updates sound extremely exciting, maybe we should try one of the 13 nightlies sometime this week
https://www.androidfilehost.com/?w=search&s=CM-12.1-20151226-NIGHTLY-klte
Commodore 64 said:
https://www.androidfilehost.com/?w=search&s=CM-12.1-20151226-NIGHTLY-klte
Click to expand...
Click to collapse
Bro you're a life saver thank you so much
kn00tcn said:
the 404 error? been wondering about that myself... i think i still have a copy of the zip on the phone, but not the recovery (unless it also comes with the CM zip?)
from earlier reading, it sounded like everything before 13 is now abandoned
now even if it's more stable, all the snapdragon camera updates sound extremely exciting, maybe we should try one of the 13 nightlies sometime this week
Click to expand...
Click to collapse
I'm on 1/6 cm 13 build. It's somewhat stable. Data drops very frequent, which I'm sure it will eventually be fixed, I just can't afford to right now. A few FC with some settings option, nothing major. It just can't possibly be as stable as cm12, which was worked for a few months compared to a weeks
This thread can be used for tracking the progress of CM14 for the Mt2?
Note:
https://plus.google.com/u/0/photos/photo/109932426055289104206/6329128826640065154?icm=false
Link is not opening
plus.google.com/109932426055289104206
Nougat for Ascend Mate 2 MTL203
So this post caught my eye... Is someone working on Android 7.0 for the Ascend Mate 2 or is it already out there?
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
shm quit development on this but released the sources
https://bitbucket.org/S-H-M/android_device_huawei_mt2
https://bitbucket.org/S-H-M/android_kernel_huawei_msm8928
Sadly
http://forum.xda-developers.com/showpost.php?p=69194744&postcount=234
ScoobSTi said:
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
Click to expand...
Click to collapse
i think that would be after someone submits a working build.
Unofficial CM14.1
bgcngm said:
https://android.cmphys.com/cyanogenmod-mt2/
Click to expand...
Click to collapse
MT2-User said:
Unofficial CM14.1
Click to expand...
Click to collapse
Stock Camera works. Both front and rear ones. Gallery app works.
DT2W also works!
Clean flash plus Open GApps nano package as shown.
Battery life: with profiles settings as Performance and Tasker running in the foreground.
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
Good to see the great community behind this phone is still developing... Thanks guys... May you have a Happy MT2 New Year...
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
nate5711 said:
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
Click to expand...
Click to collapse
@nate5711: I think this CM14.1 runs more smooth than CM13 (official). It hasn't crashed yet; previously CM13 rebooted occasionally. The battery life is very nice also: 9-10 hours SOT, similar to CM13.
I have been using TWRP by Matt (this CM14.1 Developer) for a while, so I didn't see any problem with it (the previous version is 3.0.M5-0 released on July 19; https://android.cmphys.com/twrp-mt2/). The only thing is TimeService which led to inaccurate time in TWRP, but I always named Nandroid backup myself which is much shorter while with more information. It has been fixed as Matt stated:good:
I did make a Nandroid backup of CM13 using TWRP-3.0.M5.0 and I am sure there is no problem to switch between this CM14.1 and CM13 without loss of data. I tried both clean and dirty flash of CM14.1 (over CM13), and currently I've been running the dirty-flashed one flawlessly. I tried switch between CM14.1 and CM13 with TWRP and there's no problem at all.
Sure, as I mentioned earlier, LiveDisplay night mode doesn't work. There's no CMTE either. Otherwise everything is good on my end.
Thanks to Matt for his wonderful job! :good::good::good:
BTW, Matt has his CM13-Dec 26 nightly available to us also and he said the Camera (CM13) has been fixed. TBH, I haven't tried his CM13-20161226 yet since I am very satisfied with his CM14.1-20161225.
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Sent from my Ascend Mate 2 using Tapatalk
hopkins31 said:
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Click to expand...
Click to collapse
Yes, arm 7.1 GApps required even for dirty flash over CM13.
Thanks for the helpful info, dl the rom and I'm very much enjoying it..
Thank you for providing the latest build. I have installed it and seems to be working fine. Need to use it for a few days to cycle the battery to know how good is the backup.
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
divhandyman said:
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
Click to expand...
Click to collapse
Disable the tap to wake setting under display will stop the camera popping up.
Let us Discuss:
DL links atm:
AOSPA.co Official Download Website
PA Official Mirror Link
Arter97 Mirror Link
Gapps (Optional)
Beans' Gapps
Open Gapps
Paranoid Android Google+
Overall still skeptical about this because of the developments before being left out.
Anyway, what are your thoughts?
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
seangeezy12 said:
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
Click to expand...
Click to collapse
Will you report here? if so, consider this a subscription!
Used PA a few times in the past and it has always been one of the smoothest and best running roms for me, so i'm very interested!
knevelsg-j said:
Will you report here? if so, consider this a subscription!
Used PA a few times in the past and it has always been one of the smoothest and best running roms for me, so i'm very interested!
Click to expand...
Click to collapse
Will do !!
seangeezy12 said:
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
Click to expand...
Click to collapse
The real problem about it is the updates... will it be supported continuously or just 1 month. Considering PA's track records I doubt they will be able to sustain it for long. But I still have my fingers crossed.. Can you please do me a favor and install the HDLR camera zip found in the themes and apps forum in n6p and check if it works? if it does I will be flashing PA right away.
Also @seangeezy122 please do check the kernel and grab a couple of screenies
Thx for the info & links, downloading
Just one question : are gapps included? or should I flash theme?
oussamalabbize said:
Thx for the info & links, downloading
Just one question : are gapps are included? or should I flash theme?
Click to expand...
Click to collapse
It is recommended to flash gapps :good:
phantom146 said:
It is recommended to flash gapps :good:
Click to expand...
Click to collapse
Ok, thx
Are links working mine keeps saying pending?
**ignore**
@chadouming cant wait till you get your hands on their source!
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
it is encrypted or not?
dwxvi said:
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
Click to expand...
Click to collapse
I used beans and it work fine.
It's not on the may updates yet though
dwxvi said:
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
Click to expand...
Click to collapse
No issues with BeansGapps, worked fine from the get go.
So far so good, no issues at least. Will play around for the rest of the day and see how real world usage goes.
galakanokis said:
No issues with BeansGapps, worked fine from the get go.
So far so good, no issues at least. Will play around for the rest of the day and see how real world usage goes.
Click to expand...
Click to collapse
did you use the full or mini gapps package
Flashed the rom with openGapps stock package, working fine for the moment. Looks promising but lacks extra features that other roms such as pure and RR have like hold power for flashlight and down right clear all button.
The MD5 hash for the rom file is CE696A1C396864B23F40A37CF9A4C5D6 if anyone is wondering.
troon95 said:
Flashed the rom with openGapps stock package, working fine for the moment. Looks promising but lacks extra features that other roms such as pure and RR have like hold power for flashlight and down right clear all button.
The MD5 hash for the rom file is CE696A1C396864B23F40A37CF9A4C5D6 if anyone is wondering.
Click to expand...
Click to collapse
Ever since MM PA isnt really about the features but more on the smooth side of the UI and a small handpicked own festures. Thats why before on MM I used some xposed modules to incorporate those small features I miss. Though this lack of features shouldn't be a bother to minimalists like me.
Which gapps beans or banks or open?
And which versions for vendor n2g470?
And where's the official page... Google+?
Flashed...magisk working with safety net