At the suggestion of some in the CM 10.2 thread, I have created a thread for users to post issues and ask questions pertaining to the CM 10.2 nightly builds. Downloads for the nightly builds can be found in the link below:
CyanogenMod Nightlies
Please remember, this thread is for questions, comments or issues with nightly builds ONLY. For all other builds, use the thread in the link below:
CyanogenMod 10.2 | Original Development
GPS/APN fix. Thanks to Captain Throwback for getting this out:
CM 10.2 GPS/APN fix
:good:
9/9/13 nightly here... Seems GPS won't lock on and I can't mount external SD card storage.
When I try to dirty flash back to the IRC build (8/18 unofficial), I get the Cynogen boot animation spinning forever.
evo newbcake said:
9/9/13 nightly here... Seems GPS won't lock on and I can't mount external SD card storage.
When I try to dirty flash back to the IRC build (8/18 unofficial), I get the Cynogen boot animation spinning forever.
Click to expand...
Click to collapse
I've been running the 9/4 nightly with no GPS problems.
I stopped using USB storage several weeks ago, and switched to MTP mode. CM's MTP is doing transfers much faster than it used to..
evo newbcake said:
9/9/13 nightly here... Seems GPS won't lock on and I can't mount external SD card storage.
When I try to dirty flash back to the IRC build (8/18 unofficial), I get the Cynogen boot animation spinning forever.
Click to expand...
Click to collapse
I don't suggest dirty flashing an older nightly over a new one. A clean install is most likely the fix, unless you have a backup you can restore.
Sent from my EVO using XDA Premium 4 mobile app
JerryGNYC said:
I've been running the 9/4 nightly with no GPS problems.
I stopped using USB storage several weeks ago, and switched to MTP mode. CM's MTP is doing transfers much faster than it used to..
Click to expand...
Click to collapse
I meant the sd card doesnt mount at all (scenario: i go to open waze and it tells me there is no SD card installed). Not just for USB transfers.
I did dirty flash back to 9/4/13 and SD card and GPS are working now. Thanks.
FinZ28 said:
I don't suggest dirty flashing an older nightly over a new one. A clean install is most likely the fix, unless you have a backup you can restore.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yea, I figured a clean flash would resolve, i was just posting my experiences. Thank you.
Same issue here. 9/8 and 9/9 do not recognize SD card. I was using the experimental NO DELAY zip with no issues but I've decided to run RC2 for a while. I have better battery life with 10.1.3
EVOlved human
CM10.2 camera vs Sense
Hi guys. Is there any way to permanently set the exposure to -1? I find that most if not all of the pictures taken on CM10.2 are overexposed, or the white balance is way off. As an example, taking a picture of a lamp in the evening looks like I'm taking a picture of the sun or something. The Sense camera is really the only thing I miss on CM10.2. Any advice on how to make the camera perform better on this ROM?
mhajii210
Just curious if anyone has flashed the 9/10 nightly. Are GPS and SD card still issues?
Flashed the 20130910 nightly. SD card issue resolved but GPS isn't working.
evo newbcake said:
Just curious if anyone has flashed the 9/10 nightly. Are GPS and SD card still issues?
Click to expand...
Click to collapse
9/10 for me kept bootlooping. In fact, it happened when I connected to the PC to move some files over. I'm assuming its still messed up but it could have also been my SD card, because it was wiped and I had to kinda start over.
9/5 would reboot and then stick on the CyanogenMod boot screen.
9/6 - 9/8 wouldn't even boot up at all for me.
9/4 seems to be the most stable one for me.
Anyone have a link for 0904, by chance???
physix said:
Anyone have a link for 0904, by chance???
Click to expand...
Click to collapse
http://goo.im/devs/cm/jewel/nightly/cm-10.2-20130904-NIGHTLY-jewel.zip
Anyone try the 20130911 nightly to see if the GPS issue is resolved?
Anyone have a digital battery mod we can use for this ROM
Naija boi on xda
cm 10.2 IRC
wheeler.sexton said:
Anyone try the 20130911 nightly to see if the GPS issue is resolved?
Click to expand...
Click to collapse
I can't tell but I can tell you that the wifi and hotspot is not.
wheeler.sexton said:
Anyone try the 20130911 nightly to see if the GPS issue is resolved?
Click to expand...
Click to collapse
Darren Orange said:
I can't tell but I can tell you that the wifi and hotspot is not.
Click to expand...
Click to collapse
GPS does not find a lock.
WiFi and Hotspot work fine for me.
Darren Orange said:
I can't tell but I can tell you that the wifi and hotspot is not.
Click to expand...
Click to collapse
I'm not having issues with WiFi or hotspot... ?
mhajii210 said:
Hi guys. Is there any way to permanently set the exposure to -1? I find that most if not all of the pictures taken on CM10.2 are overexposed, or the white balance is way off. As an example, taking a picture of a lamp in the evening looks like I'm taking a picture of the sun or something. The Sense camera is really the only thing I miss on CM10.2. Any advice on how to make the camera perform better on this ROM?
mhajii210
Click to expand...
Click to collapse
Camera quality was improved with the 9/3 build. Have you compared since then?
This is on a build from before 9/3. I think the camera is pretty good myself. It's the 8/30 build.
NaterTots said:
This is on a build from before 9/3. I think the camera is pretty good myself. It's the 8/30 build.
Click to expand...
Click to collapse
Nice mill
Sent from my EVO
Related
Hi,
For a couple of days now, the GPS doesn't work with the CM10.1 nightlies.
I checked my device with an app called "Z-Device test" and it says there is no GPS in my phone.
Nevertheless, the hardware is OK, as it works with the stable builds of CM.
Any ideas?
drAstic99 said:
Hi,
For a couple of days now, the GPS doesn't work with the CM10.1 nightlies.
I checked my device with an app called "Z-Device test" and it says there is no GPS in my phone.
Nevertheless, the hardware is OK, as it works with the stable builds of CM.
Any ideas?
Click to expand...
Click to collapse
I'm having similar problems. Although Z-Device test thinks that I do have GPS. None of the apps ever get a reading and the little icon on the status bar never appears.
I've tried resetting it using GPS status to reset all cached GPS data and also 'Download GPS assistance data' but it has not helped.
Its been fixed... New nightlies are back with gps :|
meilbox said:
Its been fixed... New nightlies are back with gps :|
Click to expand...
Click to collapse
OK, I'm on cm-10.1.2. Is it fixed in a newer one than this?
Jemsquash said:
OK, I'm on cm-10.1.2. Is it fixed in a newer one than this?
Click to expand...
Click to collapse
Let me elaborate, sorry I'm relatively new to cyanogen mod. I've got it set to nightlies and check for updates is turned on to daily. I've also checked manually but there are no updates available.
If I check the build date in about phone it is Fri Jul 12 12:25:13 PDT 2013.
This correlates to:
umts_spyder
Motorola Razr stable Send to ROMManager Direct Download: cm-10.1.2-umts_spyder.zip
md5sum: 222891ba743c8e6bead634d22010129e Short URL: http: //get. cm/get/9cR 158.25 MB 2013-07-12 13:25:13
on the page http: //get. cm/?device=umts_spyder (new to the forum so I can't post urls)
There seem to be more recent updates but I'm not sure how to tell if I've got them..
Hopefully it will start to roll down into the other CM based roms now as well.
It may be that you have to delete your ROM as the dirty upgrade will also contain the old/broken things as well. I had to re-do mine from a fresh corrected rom before things started to work as I expected. My $.02.
It has started working this evening...does CM update quietly? I thought I would see a different update version install if it did update.
Perhaps it has fixed itself somehow. I'm a bit confused about this.
Jemsquash said:
It has started working this evening...does CM update quietly? I thought I would see a different update version install if it did update.
Perhaps it has fixed itself somehow. I'm a bit confused about this.
Click to expand...
Click to collapse
You have to flash the nightlies through recovery in order to update. A full wipe is recommended before flashing.
Sent from my XT912 using Tapatalk 2
Right guys this is the Q&A Thread for the INTERNATIONAL X+ (enrc2b) ask questions and so on report bugs to me, NO OFF TOPIC i will update the 2nd post with bugs and so on.
Ask questions if you are unsure about something
Don't go off topic
I have only made this thread as a convenience, as i know you lot like to talk to us, but i will lock it if it goes super OT
STATE if you are on 10.1 or 10.2
REPORT BUGS IN THE DEVDB AND NOT HERE
First time installing CyanogenMod 10.1/10.2 to your ONE X+, or coming from another ROM:
- Read known issues ans FAQs
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM10.1/10.2 ZIPs to your SDCard
- Boot into HBOOT (hold Volume Down at boot)
- Flash the boot.img
- Fastboot flash boot boot.img
- Reboot into recovery via the bootloader menu
- Flash CM10.1/10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1/10.2:
- Copy CM10.1/10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.1/CM10.2 zip from SDCard
- Reboot
Code:
CM10.1 NIGHTLIES BUGS
HDMI Does NOT work
Sometimes phone siginal can take up to a minute to show after a reboot\boot
Code:
CM10.2 NIGHTLIES BUGS
HDMI Does NOT work
Sometimes phone siginal can take up to a minute to show after a reboot\boot
Focal is buggy when video recording so use the standard camera app to video record
updatet from the last unofficial release to this one. menu/recent-apps button doesnt work, even no vibration.
in the "[ROM][OFFICIAL] HTC OneX+ INTER CM10.2 (4.3) Nightlies" you wrote:
DO NOT go posting in this thread, that's what the Q&A thread in well Q&A is for...
and here you wrote:
REPORT BUGS IN THE DEVDB AND NOT HERE
:silly:
el-Loko said:
updatet from the last unofficial release to this one. menu/recent-apps button doesnt work, even no vibration.
in the "[ROM][OFFICIAL] HTC OneX+ INTER CM10.2 (4.3) Nightlies" you wrote:
DO NOT go posting in this thread, that's what the Q&A thread in well Q&A is for...
and here you wrote:
REPORT BUGS IN THE DEVDB AND NOT HERE
:silly:
Click to expand...
Click to collapse
there's a BUG REPORTER on the DEVDB
use the new theme
Lloir said:
there's a BUG REPORTER on the DEVDB
use the new theme
Click to expand...
Click to collapse
ahhh, okay, done!
Lloir, you said in the old thread (http://forum.xda-developers.com/showpost.php?p=45324654&postcount=1234) that the audio stutter was fixed in 10.2, and if I understood correctly that you are also "porting" it back to the 10.1 branch. When can we expect a new build that has these fixes?
(Also, I'm currious, how does this fixing work? Is it tuning of the parameters in /sys/module/cpu_tegra/parameters/ and /sys/module/snd_soc_tlv320aic3008/parameters/, or more hardcore sourcecode changes? And if it is the parameters, what values did you put in?)
With todays nightly my phone doesnt boot, so I roll back to personal build
Notechis said:
With todays nightly my phone doesnt boot, so I roll back to personal build
Click to expand...
Click to collapse
you are joking....it built nicely less than 6hours ago UGH i'll take a look now
koekiemonster said:
Lloir, you said in the old thread (http://forum.xda-developers.com/showpost.php?p=45324654&postcount=1234) that the audio stutter was fixed in 10.2, and if I understood correctly that you are also "porting" it back to the 10.1 branch. When can we expect a new build that has these fixes?
(Also, I'm currious, how does this fixing work? Is it tuning of the parameters in /sys/module/cpu_tegra/parameters/ and /sys/module/snd_soc_tlv320aic3008/parameters/, or more hardcore sourcecode changes? And if it is the parameters, what values did you put in?)
Click to expand...
Click to collapse
nope literally tuning the ramdisk's cpu freq's that is all i did
Same here. Stuck on HTC logo screen after latest official nightly. Tried completely new flash but still stuck there. Temporarily reverting to old nandroid save.
XiaoBBB said:
Same here. Stuck on HTC logo screen after latest official nightly. Tried completely new flash but still stuck there. Temporarily reverting to old nandroid save.
Click to expand...
Click to collapse
ALL DEVICES are affected today, so no one is getting an official nightly
Lloir said:
ALL DEVICES are affected today, so no one is getting an official nightly
Click to expand...
Click to collapse
darn, i want that audio fix
koekiemonster said:
darn, i want that audio fix
Click to expand...
Click to collapse
it's in the personal build the one you are seeding
My nightly booted but every system process kept closing upon setup and after.
Sent from my HTC One X+ using Tapatalk 4
Aust S5 said:
My nightly booted but every system process kept closing upon setup and after.
Sent from my HTC One X+ using Tapatalk 4
Click to expand...
Click to collapse
LOL wut, it's impossible for TODAYS nightly to boot.
Lloir said:
LOL wut, it's impossible for TODAYS nightly to boot.
Click to expand...
Click to collapse
Thought the nightly was only missing files like vendor and such so when dirty flashing it might still boot?
Sent from my HTC One X+ using xda premium
Lloir said:
it's in the personal build the one you are seeding
Click to expand...
Click to collapse
i think it is working now (in 10.1.3 RC2). I did a (somewhat dirty) fix to get rid of the audio stutter:
echo 760000 > /sys/module/cpu_tegra/parameters/suspend_cap_freq
echo 2000 > /sys/module/cpu_tegra/parameters/suspend_delay
echo 204000 > /sys/module/snd_soc_tlv320aic3008/parameters/audio_min_freq
(I'm using mortplayer for music, with the equalizer in the mortplayer app)
This probably isn't very good for battery life, but playing music is more important
just fixed the torch on 10.2 also cleaning up the rom itself. dialer is back on the home screen again, correct battery stats are setup and some other annoying things, once i have sorted out a few niggles, i'll upload the personal build again. Trying to get as much as i can get sorted before next week. As i won't be around and it will only be tom for a week or two
Version 2013-09-05 dirty flash only data, dalvik and cache.
Sent from my HTC One X+ using Tapatalk 4
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
asawi said:
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
Click to expand...
Click to collapse
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
I haven't had one single unwanted reboot in the year I've had it installed. Go figure! Can't say I've noticed any wifi problems either, but then wifi here is not as reliable as I'd want so maybe I just took for granted it was the wifi in the house acting up when it may have been the Tablet.
Sent from my GT-P5210 using Tapatalk 4
pepi4 said:
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
Click to expand...
Click to collapse
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
digixmax said:
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
Click to expand...
Click to collapse
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
pepi4 said:
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
Click to expand...
Click to collapse
Just use recovery to back up your current CM10.0 before flashing CM11, that way you can revert back to CM10.0 if need be without any sweat.
To flash CM11, you'll need to use CWM 6.0.4.5 (or TWRP 2.6.3.1) or later version; see http://forum.xda-developers.com/showpost.php?p=49024436&postcount=105 and http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8 on how to create flashable recovery zip to update recovery in emmc.
Be aware that CM11 sometimes randomly fails to boot (or reboot), see http://forum.xda-developers.com/showpost.php?p=49082178&postcount=131, so don't panic and give up if it fails to boot first time after installation.
I flashe CM11 and it seem to run great. Only problem is ... I can't load a lot of my application from the Play Store. When I try to install I get this error message. "my device isn't compatible". Some will install and others won't?
Went back to 10.0 CM11 has that awful low battery poltergeist thing. Get down to 20n percent battery and the ghost takes over. 10.0 doesnt do this :laugh:
pepi4 said:
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Click to expand...
Click to collapse
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
digixmax said:
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
Click to expand...
Click to collapse
Thanks!
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
Here ya go my friend ...
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
Have fun
[deleted]
deleted
i would also like to endorse this build for a few reasons:
1. super snappy, UI is smoother than 4.2 JB and kitkat
2. the old tablet UI is in this ROM and it's really easy to enable and configure, which is awesome because the old tablet UI is amazing
3. yeah no wifi problems, battery life is pretty solid too from what i've seen.
on cm10.1.3 official, i was getting FC's of the process "com.android.media" on boot. doesn't happen here, i don't think it happened on kitkat either. if you want a really stable tab, flash this build.
Looks like I am taking the wifes Nook back and checking this out!
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Sent from my Nexus 5 using Tapatalk
mpry1 said:
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Click to expand...
Click to collapse
You need to use earlier version of CWM, e.g., 6.0.3.x or 6.0.2.x.
(Alternatively you can replace the update-binary file (in the folder \META-INF\com\google\android\) in the CM10 ROM zip file with its new corresponding version in the CM11 ROM zip file).
good release version?
I'm running this 12/31 build of succulent's and it is indeed quite stable. I noted it is a debug build. I'd assume a release build would be a little quicker & smaller. Is there a release build equivalent to this package? thx!
hi
i have this rom : http://forum.xda-developers.com/showthread.php?t=2462906
ver 2.7.0
with fluid kernel
gps is not working...is there something i can do to make it work?
also, what is DS?
Hey, I can't say that I've had any GPS problems since I don't even use that function, but I believe at one point sada23 had a gps fix for 4.4.2 roms available. You can private message him and see if he still has it. If that doesn't work/he doesn't contact you, I would suggest flashing a different kernel and seeing if it works.
Vesnyx said:
Hey, I can't say that I've had any GPS problems since I don't even use that function, but I believe at one point sada23 had a gps fix for 4.4.2 roms available. You can private message him and see if he still has it. If that doesn't work/he doesn't contact you, I would suggest flashing a different kernel and seeing if it works.
Click to expand...
Click to collapse
thanks
ill msg him
shamanoid said:
thanks
ill msg him
Click to expand...
Click to collapse
No prob. You could also try copying the gps files from the /system/etc directory on his CM11 build into the CyanAOSP build with the same format. Might work if you want a quicker fix.
Also, remember to make a nandroid and wipe before flashing. A reflash would also do you some good if you are still having issues. I've actually built a working version of Dirty Unicorns 5.0 for the Vibrant, but I can't post it because I don't have the post requirements yet. From my test builds, it flies!
Vesnyx said:
No prob. You could also try copying the gps files from the /system/etc directory on his CM11 build into the CyanAOSP build with the same format. Might work if you want a quicker fix.
Also, remember to make a nandroid and wipe before flashing. A reflash would also do you some good if you are still having issues. I've actually built a working version of Dirty Unicorns 5.0 for the Vibrant, but I can't post it because I don't have the post requirements yet. From my test builds, it flies!
Click to expand...
Click to collapse
ill give it a try..since he didnt reply yet
how is the gps on your rom working?
shamanoid said:
ill give it a try..since he didnt reply yet
how is the gps on your rom working?
Click to expand...
Click to collapse
Don't know, I haven't been able to test it. You can flash it right now. It's Dirty Unicorns v5.0 in the dev forums. See if it works any better.
Mako based Candy5 build.
ROM
Download
candy5-Release.v1.0.1-20150216-geeb.zip
To flash I recommend using my TWRP 2.8.6 build.
1) If coming from Kitkat or earlier, wipe: system, data, and cache. If coming from an earlier build of Candy5, it might be safe to dirty flash.
2) Flash the Slim Gapps.
3) (Optional) Flash the latest supersu.zip. The ROM includes superuser, but some people prefer supersu
4) Boot and enjoy
AK Kernel:
Download
AK.500.geeb-aosp-11-27.zip
If you're going to use the AK kernel, I recommend flashing UKM and using the Synapse app for kernel settings.
Source:
CandyRoms
ROM Kernel
AK Kernel
Device
Vendor
Credits to kevinjoa for his work on lollipop for the OG, this would have a lot more bugs without him.
no recent task on new build edit:: sorry is working just have to activate it on buttons xD
It's working fine for me so far. Camera isn't important to me, so I could see myself using this after I sell my G2.
New build:
cm-12-20141120-UNOFFICIAL-geeb.zip
Hopefully fixed camera, but need someone to test.
brothaedhung said:
New build:
cm-12-20141120-UNOFFICIAL-geeb.zip
Hopefully fixed camera, but need someone to test.
Click to expand...
Click to collapse
i wiill test
brothaedhung said:
New build:
cm-12-20141120-UNOFFICIAL-geeb.zip
Hopefully fixed camera, but need someone to test.
Click to expand...
Click to collapse
Literally in the middle of flashing 11/19 build right now. You think I can dirty flash 11/20? Would like to test that for you.
Digil said:
Literally in the middle of flashing 11/19 build right now. You think I can dirty flash 11/20? Would like to test that for you.
Click to expand...
Click to collapse
Heck ya! Dirty flash away. All I did was change the device files for camera. Sorry for the frequent builds. I want to get this camera working and it's hard to do without a camera.
brothaedhung said:
Heck ya! Dirty flash away. All I did was change the device files for camera. Sorry for the frequent builds. I want to get this camera working and it's hard to do without a camera.
Click to expand...
Click to collapse
Definitely no need to be sorry! Thanks for your work! I'll start dl'ing 11/20 right away (unfortunately, I'm on a painfully slow connection right now).
working camera tested on google camera dirty flash
good!oo
Sent from my Optimus G using XDA Premium 4 mobile app
samuel3mn2 said:
working camera tested on google camera dirty flash
Click to expand...
Click to collapse
Same hur, and thanks for fixing the close recent apps fc bug
EDIT: Some reason can't get root acccess on Titanium Backup,flash the SuperSu from your link, will investigate.
NVM, I guess its a TB issue with Android 5.0 >.<, downloaded new version and it works
brothaedhung said:
Heck ya! Dirty flash away. All I did was change the device files for camera. Sorry for the frequent builds. I want to get this camera working and it's hard to do without a camera.
Click to expand...
Click to collapse
will you please tell us which files you changed for camera ?
or link us to commit, plz..
RohanAJoshi said:
will you please tell us which files you changed for camera ?
or link us to commit, plz..
Click to expand...
Click to collapse
I just pushed it to my github now that I know it works. These two commits:
https://github.com/brothaedhung/device_lge_geeb/commit/0e513b01cbc7fecca6414f3ce660c583607f6fb5
https://github.com/brothaedhung/device_lge_geeb/commit/352eb9a37df35a16b7044a60181f8a332e485f20
It had to do with an AOSP update from earlier today that I hadn't merged to the device repo yet and me accidentally deleting a line when merging the 5.0 mako update.
brothaedhung said:
I just pushed it to my github now that I know it works. These two commits:
https://github.com/brothaedhung/device_lge_geeb/commit/0e513b01cbc7fecca6414f3ce660c583607f6fb5
https://github.com/brothaedhung/device_lge_geeb/commit/352eb9a37df35a16b7044a60181f8a332e485f20
It had to do with an AOSP update from earlier today that I hadn't merged to the device repo yet and me accidentally deleting a line when merging the 5.0 mako update.
Click to expand...
Click to collapse
thanks limit exceeded..
downloading now..
thanks for all effort..
Camera force closes.
I flashed all the files you provided according to the instructions and everything works except for the camera, I get a black screen then force closes. And there are 3 small bugs: one is on screen>advanced settings I press that option and it doesn't do anything, the other had something to do with the network settings but I forgot what was the problem, sorry. And the last one is that I can't activate the battery saver (maybe that's not a bug, I don't know.) But it's a great ROM overall
brothaedhung said:
New build:
cm-12-20141120-UNOFFICIAL-geeb.zip
Hopefully fixed camera, but need someone to test.
Click to expand...
Click to collapse
Is SD card working here?
it's OK......
Sent from my Optimus G using XDA Premium 4 mobile app
---------- Post added at 05:36 PM ---------- Previous post was at 05:34 PM ----------
it's a great rom!!!
Sent from my Optimus G using XDA Premium 4 mobile app
AntonyOrtega said:
I flashed all the files you provided according to the instructions and everything works except for the camera, I get a black screen then force closes. And there are 3 small bugs: one is on screen>advanced settings I press that option and it doesn't do anything, the other had something to do with the network settings but I forgot what was the problem, sorry. And the last one is that I can't activate the battery saver (maybe that's not a bug, I don't know.) But it's a great ROM overall
Click to expand...
Click to collapse
Ok, just dirty flashed 11/20 over 11/19. SD card, WiFi, NFC all appear to be working. I can't check mobile data/calling right now, though. Camera seems to be working fine on this one! (oddly enough, though, I can only activate Camera from my lockscreen because it doesn't show up in the app drawer, maybe I have it hidden) Only small thing, as mentioned above, is Settings > Display > Advanced Settings doesn't do anything. Not sure if this is only this ROM, or something related to CM12 in general. Battery saver, however, does seem to work for me.
Thanks again for the work, brothaedhung! This is already DD material for me. I'll test out the battery life over the next few days, and report back. Looking forward to more from you, particularly as the CM team implements more features.
Edit: One more minor thing. Even though I have Location Services turned off, the icon still appears in the status bar.
Rom fully working, but very fast buttery drained, i am repair from TB 20 apps, 1 reboot and my battery lasted for ~1h, deviec hot, i install Trickster mod uc to 384-1,1ghz(device laggy)
and yet noticed, when the phone is completely turned off and charging, the error ap watchdog bark detected with green screen
I have not can see the phone memory after repeated flashing(
take screenshot->"Couldnt capture screenshot. Cant take screenshot due to limiter storage space, or it isnt allowed by the app or your organization."
Awesome work! I'm totally forking your device and vendor tree