Hello Guys..
For: ARM6 And Display 3,2" Zoll
I found this:
http://forum.xda-developers.com/showthread.php?t=1849750
This can Porting
have where intressting?
kevios12 said:
Hello Guys..
For: ARM6 And Display 3,2" Zoll
I found this:
http://forum.xda-developers.com/showthread.php?t=1849750
This can Porting
have where intressting?
Click to expand...
Click to collapse
The Rom surely look preety good.
I hope someone would port it
Yes i hop this too this is a very great rom and the CPU is supported
Hello. I'm not a true dev, but I like a lot WALKMAN app and I'd like to take a look to Xperia customization, too. I've done a basical port. Just boots and shows initial setup. Every process FCs. If anyone wants to work on this, I can upload the zip. Actually I'm on holiday and I've done this on my friend's PC. I'll take a better look inside this port when I'll be back home, but I DON'T PROMISE ANYTHING. As said in the beginning of the post, I'm not a true dev, so I'm not sure I can do this.
But maybe there's someone sets ran for porting
Yes for sure you can port that from P500 Due to almost same device (Same based armv6) just need some trick over the porting.
Framework & Apps most important overall for the porting process.Also for adb knowledge
Steriod™ said:
Yes for sure you can port that from P500 Due to almost same device (Same based armv6) just need some trick over the porting.
Framework & Apps most important overall for the porting process.Also for adb knowledge
Click to expand...
Click to collapse
Looks cool tough
Related
can anyone help me to learn a bit more than android!
I heared about compile form source and biuld form source...And I can't understand what diferences between compile from source and port! can U explain easily?
for example should I want to bring superOxygen Rom in my x10 , should I port it with cm as base or compile form source?!
thx
for short:
porting means you are making rom to your device from another device, you will be just moving libs, editing ramdisk, etc.
compiling from source means you make a complete rom from scratch including programming own drivers, libs in some situations.
If source is avaiable fot superOxygen then you can try compiling it yourself, but editing, or adding your drivers is necessary, and anyway its harder than porting, but gives better result in fact because you can program everything to make it work and you aren't dependant on binary files like in porting.
When porting, hardware should be close to one you have in your X10, because most things will not work when processor differs, wifi modules, gsm etc. You take files from any X10 rom and replace ones that are with same name in another rom (oxygen here).
Thanks very much man!
I took your advices...it was good advices but what is your idea about this:
If I port Superoxygen from Nexus1 for my x10 and (use stable AOSP as base) , then can I say I make a superOxygen Rom?
compiling from source is how much difficult?! I'm 17...! , I have a link that teach compile from source... Is it need some Knowledges that is impossible for me?!
heh, im 17 too and I don't have much knowledge, but looking on pcfighter(a gt540 developer) im impressed, hes 17 too and does a great job, so it depends on time spent and interests
when you port oxygen, you can just say that you ported and not made it. credits go to the maker and you for just making it work on x10
I'm looking now how to compile for gt540 but can't find any idea how to make it strict for gt540 compiling from source tutorials are mostly for nexus s and nexus 4g because most of are just remade of what you can find on official android developer page and its easier. For unsupported device its even harder, you have to work with what you already have and add it first to sources then ... more things to do. I'm beginner with that too, just pulled sources yesterday and looking how to make it work :] so don't expect so much help in this way :]. Just telling you overall how this looks
For compiling you need to know Java and C programing language.
Sent from my Xoom using Tapatalk
@mesaj! do you know c and gava programing languge?! ofcourse I worked c++ a little...
Thanks now I also know what the difference is.
In easy terminology. Compiling a ROM is building a ROM from the source code so it means you are building a ROM from the ground up. Porting a ROM to your phones means to take a ROM built for another phone and to get it working on yours. That's the simplest way to think of it. I have in my signature a guide for compiling a ROM. Oh and I'm newly 18
私のEVO 3Dから送信される。
Thanks for this thread
Thanks now I also know what the difference is.
Click to expand...
Click to collapse
Thanks for this thread
Click to expand...
Click to collapse
just press the thanks button if you like this thread
So i saw that in other devices fourms they ported the Sense 4.0 multitasking screen. But it's not working for all devices or builds.
So a dev/ or user has to port the code to our builds . I myself don't have the time to port it but i am looking forward to seeing this on out beloved device.
Here's the source thread. http://forum.xda-developers.com/showthread.php?t=1589963
Deonix said:
So i saw that in other devices fourms they ported the Sense 4.0 multitasking screen. But it's not working for all devices or builds.
So a dev/ or user has to port the code to our builds . I myself don't have the time to port it but i am looking forward to seeing this on out beloved device.
Here's the source thread. http://forum.xda-developers.com/showthread.php?t=1589963
Click to expand...
Click to collapse
It's quite easy I have this running now on my defy ...... U need to source code to apply no porting necessary
I will help you make one for yourself after my exams are done
There's already a thread that has a flashable zip that works for older nightlys.
it may look neat but it hardly promotes multitasking that the inbuilt ics carousel provides...you can barely see the next two open apps using the sense "multitasker"
Kayant said:
It's quite easy I have this running now on my defy ...... U need to source code to apply no porting necessary
I will help you make one for yourself after my exams are done
Click to expand...
Click to collapse
Thanks. I have exams as well ) i will try to port it. If i stumble i will let you know. Maybe i will like it.
Good luck on your exams.
Hello Guys,
I looking for some information about the NovaThor U8500, and I found in the blog rsalveti (google it) a board with the STE U8500 running maemo, meego and ubuntu, a great surprise for me, where they only need a compatible kernel to run, booting by U-Boot.
Like the Xperia P / U / Sola run on the same SoC, I think it would be quite easy to port U-boot for these models, which would be very good, especially for P, which have HDMI output, ubuntu could be ported easily and could be used as a real desktop, using a keyboard and mouse via USB-OTG, for example
Moreover, we have snowball board, which has a Nova A9500 (I could not find any difference between him and the U8500, only the Clock and the lack of modem), running Mozilla Firefox OS, Ubuntu and Android. In short, if we port U-boot successfully , the Xperia P has a great chance to became a new Nokia N9 here
:laugh::laugh::laugh::laugh:
And then, what you guys think about it?
Regrads ,
CaioA2 said:
Hello Guys,
I looking for some information about the NovaThor U8500, and I found in the blog.............
Regrads ,
Click to expand...
Click to collapse
Nice info,thanks for sharing:good:
It will be awesome,but as in my knowledge porting U-boot is not so easy
Anyways will be awesome if somebody ports it:victory:
Regards,
acervenky,
XPT
Actually , they support STE U8500 :victory: http://lists.denx.de/pipermail/u-boot/2010-April/069653.html
Now, we only have to find someone who knows what they do with that information, and someone brave and crazy enough to test it.
:laugh: HAHAHAHAHAHAHAHAHA :laugh:
hey guys, just wondering how difficult it would be to do this and keep the finger print scanner. i (with no android developing experience) tried following a few tuts to try and port a 4.3 rom with little success, i managed to get it to start installing in cwm then to give a permission failure or something similar so yeah just a quick question
+1
Sent from my SM-N900V using Tapatalk
hectorz321 said:
hey guys, just wondering how difficult it would be to do this and keep the finger print scanner. i (with no android developing experience) tried following a few tuts to try and port a 4.3 rom with little success, i managed to get it to start installing in cwm then to give a permission failure or something similar so yeah just a quick question
Click to expand...
Click to collapse
Permission failure? Noob here too
I am guessing the ROM you tried to port checks for the Model number of the phone before flashing. What ROM did you try to port to and if you could post the instructions here we will make this the porting thread
Given that HTC One has all the custom ROM's and kernels we need devs or someone like us who can follow instructions to start doing it. I am sure we will get help from one another and end up with custom ROM's for the MAX.
I was also thinking of doing this but just to start with i don't want to look at the fingerprint scanner and may be later we could get it working.
I am certain most people would be willing to not have a working fingerprint scanner, as a trade off for a few custom roms/kernels...
Well to start you need to make sure your Meta-Inf directory is one from the Max, you should be porting from something with the same board as well which would give you less headaches in the long run. The One would be a good starting port since they use the same boards (msm8960 Snapdragon 600) The updater script in Meta-Inf needs to be pointing to the correct device. For example and this is just an example in the beginning of the updater script which is really the instructions for flashing the rom in recovery shouldn't say something like "get prop blah blah m7vzw" the m7 being the model # should be t6vzw if you were using a Verizon device etc etc.. All mount points need to be exactly what the Max's mount points are otherwise it will never flash.. The original One mount points aren't the same as the One Max. Also the kernel from the Max is a must, plus in system/lib you need the modules as well as hardware. In system/bin you need vold, vold is device specific. In system/etc you need vold.fstab again device specific stuff. The you need the hardware directory, which is touch capacitive buttons and LED's and what not. Those may be the same as the One since they are laid out the same.. The audio should most likely be the same but you would need to remove all the Beats Audio crap from system/etc since the One Max isn't a beats device.. GSM to GSM may be an easy port, CDMA to CDMA may be a little more difficult. Although they use libril-qc-qmi-1.so I think it is, that may be a typo but that's something like what the lib path will point to, the code may be slightly different in telephony for CDMA LTE devices. That would be found in framework.jar if applicable framework2.jar..
I could most likely easily get a port done, I'm just very limited to time.. Some of the tutorials out there are very generic and would kind of work well if you have 2 very identical devices with minor changes and manufactured around the same time small example would be like the HTC Desire and the HTC Thunderbolt.. That's a pretty straight forward port with some minor audio tweaks since sound image in system/etc is different and that as well are devices that would require a RIL hack as stated above with framework.jar... That right there would be strictly smali/baksmali hacking which I have some knowledge with but by no means a master of it lol... That is unless we had source for certain things but that isn't likely by no means... If anyone is interested in getting to work I'm more then willing I just sometimes have a hectic schedule... There is more to porting then just a few quick changes if you want a clean solid daily driver port... I started to port MIUI V5 just haven't really had much of a chance to test it. I have 3 MIUI ports built all slightly altered to eventually test different hacks..
The reason I chose MIUI V5 to port is because a good deal of HTC MIUI ROMs are based heavily on Sense.. Not many of them are AOSP based anymore which to me is kind of a shame.... The Chinese must have gotten tired of so many ports popping up with a lot of broken stuff because they all use to be AOSP based and to get them ported required a ton smali hacks and now when you decompile an actual source built official chinese MIUI rom and you diff out lets say services.jar from CM and services.jar from MIUI for every line of code like cdmareceiver.smali in CM in MIUI it's i.smali then cdmareceiver$1.smali in CM in MIUI it's 23.smali.... Those aren't actual lines those are just examples but they made it damn near impossible to properly diff stuff out.. You'd literally have to go through thousands and thousands upon thousands of lines to figure out which matches what and then make the changes you feel like need to be made and then hope you didn't break something in the process.... It sucks lol...
So yeah most of the HTC devices are now MIUI converted Sense based builds and I'm hoping are a little easier to port with less changes!! But I guess we'll see?!?!
Like I said, anyone wanting to work with me I will be more then glad to lend my knowledge of Android! I need someone to get me motivated again. I really miss working on Android and building stuff porting stuff whatever.. It's just fun! Plus we desperately need some form of a custom Android really really bad.... All of us do... I mean I'm Verizon, but Sprint, the International crew, all of us....
Lets pool all of our knowledge together and do some work!!! To all reading this if you are down contact me in this thread or PM me and lets get busy!
Murrda said:
Well to start you need to make sure your Meta-Inf directory is one from the Max, you should be porting from something with the same board as well which would give you less headaches in the long run. The One would be a good starting port since they use the same boards (msm8960 Snapdragon 600) The updater script in Meta-Inf needs to be pointing to the correct device. For example and this is just an example in the beginning of the updater script which is really the instructions for flashing the rom in recovery shouldn't say something like "get prop blah blah m7vzw" the m7 being the model # should be t6vzw if you were using a Verizon device etc etc.. All mount points need to be exactly what the Max's mount points are otherwise it will never flash.. The original One mount points aren't the same as the One Max. Also the kernel from the Max is a must, plus in system/lib you need the modules as well as hardware. In system/bin you need vold, vold is device specific. In system/etc you need vold.fstab again device specific stuff. The you need the hardware directory, which is touch capacitive buttons and LED's and what not. Those may be the same as the One since they are laid out the same.. The audio should most likely be the same but you would need to remove all the Beats Audio crap from system/etc since the One Max isn't a beats device.. GSM to GSM may be an easy port, CDMA to CDMA may be a little more difficult. Although they use libril-qc-qmi-1.so I think it is, that may be a typo but that's something like what the lib path will point to, the code may be slightly different in telephony for CDMA LTE devices. That would be found in framework.jar if applicable framework2.jar..
I could most likely easily get a port done, I'm just very limited to time.. Some of the tutorials out there are very generic and would kind of work well if you have 2 very identical devices with minor changes and manufactured around the same time small example would be like the HTC Desire and the HTC Thunderbolt.. That's a pretty straight forward port with some minor audio tweaks since sound image in system/etc is different and that as well are devices that would require a RIL hack as stated above with framework.jar... That right there would be strictly smali/baksmali hacking which I have some knowledge with but by no means a master of it lol... That is unless we had source for certain things but that isn't likely by no means... If anyone is interested in getting to work I'm more then willing I just sometimes have a hectic schedule... There is more to porting then just a few quick changes if you want a clean solid daily driver port... I started to port MIUI V5 just haven't really had much of a chance to test it. I have 3 MIUI ports built all slightly altered to eventually test different hacks..
The reason I chose MIUI V5 to port is because a good deal of HTC MIUI ROMs are based heavily on Sense.. Not many of them are AOSP based anymore which to me is kind of a shame.... The Chinese must have gotten tired of so many ports popping up with a lot of broken stuff because they all use to be AOSP based and to get them ported required a ton smali hacks and now when you decompile an actual source built official chinese MIUI rom and you diff out lets say services.jar from CM and services.jar from MIUI for every line of code like cdmareceiver.smali in CM in MIUI it's i.smali then cdmareceiver$1.smali in CM in MIUI it's 23.smali.... Those aren't actual lines those are just examples but they made it damn near impossible to properly diff stuff out.. You'd literally have to go through thousands and thousands upon thousands of lines to figure out which matches what and then make the changes you feel like need to be made and then hope you didn't break something in the process.... It sucks lol...
So yeah most of the HTC devices are now MIUI converted Sense based builds and I'm hoping are a little easier to port with less changes!! But I guess we'll see?!?!
Like I said, anyone wanting to work with me I will be more then glad to lend my knowledge of Android! I need someone to get me motivated again. I really miss working on Android and building stuff porting stuff whatever.. It's just fun! Plus we desperately need some form of a custom Android really really bad.... All of us do... I mean I'm Verizon, but Sprint, the International crew, all of us....
Lets pool all of our knowledge together and do some work!!! To all reading this if you are down contact me in this thread or PM me and lets get busy!
Click to expand...
Click to collapse
this was exciting to read, best of luck
I am going to get Ubuntu installed today and then Android Kitchen here i come!
pradeepvizz said:
I am going to get Ubuntu installed today and then Android Kitchen here i come!
Click to expand...
Click to collapse
You can always use Cygwin on windows. there is a how to cook a rom tutorial in the General Android Dev forum.
DeadPhoenix said:
You can always use Cygwin on windows. there is a how to cook a rom tutorial in the General Android Dev forum.
Click to expand...
Click to collapse
Thanks, i just installed it via virtual box without disturbing my system.
Just got android kitchen up and running, on prting sides of things got further this time, into aroma installes but error 7 which suggested earlyer is to do with mount points, if anyone could happen to help with theese it would be fab ))
Ok this is good start, i am proud of us here
I have got Android Kitchen running on my Ubuntu via virtual box.
I tried to set my working folder and tried tried to import my TWRP stock ROM backup. It seems like Android kitchen will require a CWM backup and TWRP does not seems to work.
With the TWRP backup i got this error
NON-YAFFS/NON-TAR FILE FORMAT DETECTED IN ROM
Click to expand...
Click to collapse
So i have just restored stock ROM on my phone, flashed CWM and now backing up my Stock ROM to COOK ANDROID
@[email protected] did you miss this thread just kidding, I know you have got a hectic schedule.
Again i am extremely happy to see ppl starting to develop ROM's!
Thanks for your encouragement @Murrda
No problem.. I'm home from work already and I'm off for the next 3 days so I'm actually going to get back to working on some ports. Anyone need a hand with anything as far as questions or setting up Linux or a dev environment please feel free to hit me up!
pradeepvizz said:
Ok this is good start, i am proud of us here
I have got Android Kitchen running on my Ubuntu via virtual box.
I tried to set my working folder and tried tried to import my TWRP stock ROM backup. It seems like Android kitchen will require a CWM backup and TWRP does not seems to work.
With the TWRP backup i got this error
So i have just restored stock ROM on my phone, flashed CWM and now backing up my Stock ROM to COOK ANDROID
@[email protected] did you miss this thread just kidding, I know you have got a hectic schedule.
Again i am extremely happy to see ppl starting to develop ROM's!
Thanks for your encouragement @Murrda
Click to expand...
Click to collapse
Murrda said:
No problem.. I'm home from work already and I'm off for the next 3 days so I'm actually going to get back to working on some ports. Anyone need a hand with anything as far as questions or setting up Linux or a dev environment please feel free to hit me up!
Click to expand...
Click to collapse
heyy i could use some help doing this part in android kitchen. straight from android kitchens page but i can't seem to get the recovery.fstab out anyway! im on t6ul verson of the max by the way thanks
/HIDE (sorry dont know how to get this to work (forum noob here too)
Create a file under the kitchen's /tools/edify_defs folder, with the name being the same as the value of ro.product.device (found in your device's /system/build.prop file).
If the stock ROM images for your device contain the recovery.img file, extract its files from the kitchen menu: Advanced --> Tools for boot image --> Extract from boot.img/recovery.img in any folder. Then, open up its ramdisk folder, and look for /system/etc/recovery.fstab or /etc/recovery.fstab or similar FSTAB file location. Open this file to find the mount points.
See the template file in the edify_defs folder to see how to set the mount points inside the file you created. Look at the other files in that folder for examples on how to do it.
managed to flash something and get mounting things sorted ))), getting an interesting navy green screen when booting now, will let you know on further developments. its a vanilla android rom i tried insertcoin-m7-google-edition_5.0-1 to be exact
hectorz321 said:
managed to flash something and get mounting things sorted ))), getting an interesting navy green screen when booting now, will let you know on further developments. its a vanilla android rom i tried insertcoin-m7-google-edition_5.0-1 to be exact
Click to expand...
Click to collapse
Good start mate! awesome!
update, getting a boot logo now which is great but im in a bootloop and have no idea where to start, iv been looking on trying to get logcat and such running but no success yet. Any advise anyone?
hectorz321 said:
update, getting a boot logo now which is great but im in a bootloop and have no idea where to start, iv been looking on trying to get logcat and such running but no success yet. Any advise anyone?
Click to expand...
Click to collapse
Which guide are you following? i just cooked a ROM today first time. I made the stock ROM for the T6UL.
---------- Post added at 08:34 PM ---------- Previous post was at 08:34 PM ----------
ooo, Merry Christmas everyone
Yeah I've been trying to port gpe over to the max but I think I need the gpe kernel ported too.. I used the Max Sense kernel for it and I get a bootloop or frozen boot logo after install with no hope of getting a logcat. I didn't move the Max sense update-binary but don't think that would be an issue, both since Its gpe and I'm using aroma..
Sent from my HTC One using XDA Premium 4 mobile app
HolyAngel said:
Yeah I've been trying to port gpe over to the max but I think I need the gpe kernel ported too.. I used the Max Sense kernel for it and I get a bootloop or frozen boot logo after install with no hope of getting a logcat. I didn't move the Max sense update-binary but don't think that would be an issue, both since Its gpe and I'm using aroma..
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Got to exactly the same point as you, reading several tutorials online i came across this interesting line "To port Sense you have to unpack the boot.img of your base rom and edit the init.rc to change the bootclasspath and match it with the port one" which is what iv done but also got stuck in a bootloop, looking at the two kernels are are a few differences in them. I think that might be they key.
hectorz321 said:
Got to exactly the same point as you, reading several tutorials online i came across this interesting line "To port Sense you have to unpack the boot.img of your base rom and edit the init.rc to change the bootclasspath and match it with the port one" which is what iv done but also got stuck in a bootloop, looking at the two kernels are are a few differences in them. I think that might be they key.
Click to expand...
Click to collapse
Yeah, i know for the kernel, without being able to mess with the zimage, the sense max kernel lacks the init.environ.rc from gpe, the fstab file is different(at least file extension), and there's a few things that point to sense files or folders that don't exist on gpe. Currently there is no released source for the max yet :'( so unless someone knows how to do it manually and hasn't shared HOW to do so, I just have to wait.. Hopefully it won't be too long.
Sent from my HTC One using XDA Premium 4 mobile app
Hey,
I was a semi-developer for a my previous phone, it was a mediatek.
As you all know porting and customizing ROMs for mediatek phones is really easy.
But now I also want to start building/porting for this phone.
Can someone give me links to guides,tips,.. for this phone.
What is the best phone to port ROMs from?
Thanks
Can no p760 developer give me tips? Or are you all thinkig "noob"?
You dont have to be PRO to port roms I started doing it one week ago and it goes really well. I will quote nasheich. He wrote very good tips:
nasheich said:
1. Find device with same CPU, LG L9 have dual core CPU, so find it, for example, Motorola Razr(I'm used on Mokee n Paranoid), Galaxy Tab 2(I'm used on Xperience, AOKP, Hellfire).
2. Forget about screen size(4", 5" or 7"), the important is screen DPI, it has to be used same DPI, LG L9 has HDPI, find it the HDPI device
3. Same OS version, KK with KK, JB with JB, special for JB, see the version of JB, example JB 4.2.2 with JB 4.2.2
4. Make sure you have installed software on Windows/Mac, for porting, you may need just 2 software,
- Note++(for editing build.prop & other files like .txt, .bin etc)
- Apktool (for decompile n recompile .apk n .jar files)
5. Open mind
Click to expand...
Click to collapse
I will add only two tips. Don't give up and try to read as many guides as you can
Xerdox said:
You dont have to be PRO to port roms I started doing it one week ago and it goes really well. I will quote nasheich. He wrote very good tips:
I will add only two tips. Don't give up and try to read as many guides as you can
Click to expand...
Click to collapse
Thanks for your response but could you give me a link to the guide you used? I tried some guides that I found but it didn't work. Im trying to port slimkat.
http://forum.xda-developers.com/showthread.php?t=1908008
http://forum.xda-developers.com/showthread.php?t=1957219
http://forum.xda-developers.com/showthread.php?t=2245786
http://forum.xda-developers.com/showthread.php?t=2284985
I think that's all.
Xerdox said:
http://forum.xda-developers.com/showthread.php?t=1908008
http://forum.xda-developers.com/showthread.php?t=1957219
http://forum.xda-developers.com/showthread.php?t=2245786
http://forum.xda-developers.com/showthread.php?t=2284985
I think that's all.
Click to expand...
Click to collapse
Thanks gonna try it soon
Remember that you will never find a guide which will work for all roms