I have an artix with ginger 2.3.5. I am thinking of upgrading to the 4.x, ics or jellybean.
One problem that I worry about my artix's dock. If I succeed to upgrade it, will the dock be useless?
My question is,, can any 4.x ROM be compatible with artix's dock?
Any suggestion will be appreciated!
ark.bandage said:
I have an artix with ginger 2.3.5. I am thinking of upgrading to the 4.x, ics or jellybean.
One problem that I worry about my artix's dock. If I succeed to upgrade it, will the dock be useless?
My question is,, can any 4.x ROM be compatible with artix's dock?
Any suggestion will be appreciated!
Click to expand...
Click to collapse
I want to do this as well. If anyone know please share the info. I don't care if it's webtop or just tablet version ICS.
Paranoid Android has a hybrid tablet mode where you can chose some apps to display in tablet mode.
I used it for a while with my lapdock, I installed dolphin browser to use in tablet mode with lapsock.
Not great but workable.
I have however switched back to maxblur 5 with Ubuntop as I needed more functionality.
Sent from my MB860 using xda premium
Larac said:
Paranoid Android has a hybrid tablet mode where you can chose some apps to display in tablet mode.
I used it for a while with my lapdock, I installed dolphin browser to use in tablet mode with lapsock.
Not great but workable.
I have however switched back to maxblur 5 with Ubuntop as I needed more functionality.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Is "Paranoid Android" a ROM? I am new. Please forgive my uninitiation.
If I install paranoid android into my mb860, and then I connect the cell phone to the dock, can the cell phone's screen project to the dock's screen?
ark.bandage said:
Is "Paranoid Android" a ROM? I am new. Please forgive my uninitiation.
Click to expand...
Click to collapse
A quick search reveals the answer.
ark.bandage said:
If I install paranoid android into my mb860, and then I connect the cell phone to the dock, can the cell phone's screen project to the dock's screen?
Click to expand...
Click to collapse
That's the idea.
Short answer: Currently, no.
Webtop/dock requires Blur in order to work, or so the devs say. Since there's no official ICS rom, there's no blur and Webtop. I believe a DEV was able to slap together a standalone Webtop which could go as far as launching from a CM7 Rom, but it was a WIP and was dropped, mostly a proof-of-concept. Also, I don't have a link ready.
Also, mortorola is rumoured to drop Webtop functionality in ICS/JB, so I'm afraid you're out of luck.
Stick to GB if you want dock functionality, I'm afraid.
41. said:
Short answer: Currently, no.
Webtop/dock requires Blur in order to work, or so the devs say. Since there's no official ICS rom, there's no blur and Webtop. I believe a DEV was able to slap together a standalone Webtop which could go as far as launching from a CM7 Rom, but it was a WIP and was dropped, mostly a proof-of-concept. Also, I don't have a link ready.
Also, mortorola is rumoured to drop Webtop functionality in ICS/JB, so I'm afraid you're out of luck.
Stick to GB if you want dock functionality, I'm afraid.
Click to expand...
Click to collapse
He actually didn't even ask about webtop.
Related
Hi,
Was wondering, has anyone found a rom that's compatible with the Bell Atrix phones? I'd really like to get rid of the Motorola bloatware in mine, and if possible, also get Android 3.0 on it as well.
Silvercloak
Silvercloak5098 said:
I'd really like to get rid of the Motorola bloatware in mine, and if possible, also get Android 3.0 on it as well.
Click to expand...
Click to collapse
You dont need a ROM to remove "bloatware", you can freeze and even delete any app you choose with Titanium Backup. Be careful. Also, you will never have 3.0 on your PHONE because 3.0 is for TABLETS; the best you can hope for right now is 2.3.
Edit: Imediately after posting this I realized ^^ might sound misleading.
You cant have 2.3 either! Haha
2.2 is currently the latest OS version available for the Atrix.
As much as I love reading through threads on XDA, I just dont have much time reading every Dev thread here. I will be getting an Atrix in the coming days to replace my Dell Streak. The reason why I cannot read through all the thread is because Ive been on and off with like 4 different droids and just cant waste so much time reading through all the threads, Ive already burnt all the time I had to waste.
So If anyone could just give the name of the ROM which they think is the most stable at this moment, I would be very greatful. As I need a stable ROM to fall back on when I try all the new ones coming out.
Thanks in advance!
DJScope
Get the stable version.
http://download.cyanogenmod.com/?device=olympus
am a fellow Dell Streak user that moved to Moto Atrix
Am still fiddling with the original ROM.
do note that once you switch to CM7, you will lose the webtop functionality.
thanks for the input guys!
@AmadeusPandora
what exactly is webtop?
djscopesofm said:
thanks for the input guys!
@AmadeusPandora
what exactly is webtop?
Click to expand...
Click to collapse
Atrix allows you to dock the phone to a lapdock which transform it into something like a netbook.
the lapdock has a 11.6" screen, keyboard, 2 USB ports and doubles as an extended battery.
Google for pictures/videos and more details.
AmadeusPandora said:
Atrix allows you to dock the phone to a lapdock which transform it into something like a netbook.
the lapdock has a 11.6" screen, keyboard, 2 USB ports and doubles as an extended battery.
Google for pictures/videos and more details.
Click to expand...
Click to collapse
Oh yea.. ive seen that ad.. the feature is pretty pointless to me..
Will anyone vouch for the Neutrino ROM?
djscopesofm said:
Oh yea.. ive seen that ad.. the feature is pretty pointless to me..
Will anyone vouch for the Neutrino ROM?
Click to expand...
Click to collapse
I prefer Neutrino over stock CM7.2
Sent from that Atrix.
tatperson said:
I prefer Neutrino over stock CM7.2
Sent from that Atrix.
Click to expand...
Click to collapse
also, one last question... how stable is the CM9 build for 24/7 usage.. im aware that the video camera doesnt work
djscopesofm said:
also, one last question... how stable is the CM9 build for 24/7 usage.. im aware that the video camera doesnt work
Click to expand...
Click to collapse
It's working great for me. I mean, I have little requirements. Facebook, Twitter, Browser, XDA app, camera (not video), wifi, 3g.. they're all working great for me. It's stable for my needs. You can give it a try. If you don't like it, you can always use Neutrino
Just remember that not all apps would work. Chrome, for example, is forever crashing on the Atrix due to the lag of hardware acceleration.
Sent from that Atrix.
Stable and batery+++
"Old" Alien (no theme).
Stable, fast and batery++
Topogigi 1.1 (no widget).
Stable, fast and batery++
CM7 last nightly.
ROM based ICS, good, but not stable.
Sorry for bad english.
Sent from my MB860 using xda app-developers app
Using Neutrino here. Really great performance-wise. I gave up CM9´s roms ATM because i need a fully functional camera and even though the situation got better now, it still buggy. Neutrino is my daily driver though.
Once again, thanks for all of your info! I really appreciate it. Ill be getting my Atrix today in just a few hours
Neutrino is the best for now. Up coming new version soon...
Sent from my Atrix using Tapatalk2.
gag22 said:
Neutrino is the best for now. Up coming new version soon...
Sent from my Atrix using Tapatalk2.
Click to expand...
Click to collapse
I flashed CM7 to my Atrix 4G earlier this week and it is stable. I spent many hours reconfiguring and testing after the change to ensure the phone will be stable for work. I think it will be and do not plan to make any more major changes until the end of the year unless something catastrophic happens.
The phone has not crashed and boots 5x faster than stock (30s - 35s from button down). Bluetooth connects within one or two seconds compared to 5s - 10s before. Wifi performance has remained unchanged, sometime up to 30s to fix but I have only tried on my old, home router. GPS lock is 10s - 15s indoors, maybe a slight performance increase. Camera loads quick. No hesitation when typing (after the last upgrade I was seeing a lot of that).
techphers
I'd say CM7.2 last stable release.
Better then any other ROM i tried, and i tried them all
I'd like neutrino 2.8 EE too, rock solid since launch
Does Neutrino has webtop support? as i know the fingerprint scanner works
coolguy6 said:
Does Neutrino has webtop support? as i know the fingerprint scanner works
Click to expand...
Click to collapse
No, Neutrino is CM7 based and webtop does not exist on any such roms (or any ICS roms).
Furthermore , the old Webtop is likely to become permanently dead. We will have to figure out how to use the tablet mode based webtop in the future.
Which tweaked blur rom is best
Sent from my MB860 using xda app-developers app
caribe said:
Which tweaked blur rom is best
Click to expand...
Click to collapse
"Best" is subjective. The most popular Blur-based ROM still seems to be NottachTrix; unfortunately, the latest version (1.3.1) is also the last version, as Nottach no longer supports it (he no longer owns an Atrix). There are a few other Blur-based ROMs that seem to still be in active development, but I haven't really been following them (I use CM7.2).
Hi all, i havent bit the bullet yet with this rooting game as the atrix as been plenty fast enough for me box standard, but since getting the lapdock and finding it so painfully slow that I wont use it, I started googling my options, so here i am as it seems that rooting is the answer!
Ive been reading about Jellybean and it sounds like its been designed to work with accessories like the lapdock, that lead me to read the thread about the CM10 rom that epinter is building which sounds brilliant.
I cant ask the Q on that thread because im a noob so can someone tell me if epinters cm10 works with the lapdock or would i need to add things.
thanks
Joe
Epinter's CM10 work with lapdock, but just simple HDMI output, the webtop app isn't work.
only portraite mod
rumcajsz said:
Epinter's CM10 work with lapdock, but just simple HDMI output, the webtop app isn't work.
Click to expand...
Click to collapse
yes and hdmi output doesn t work landspece mod or i didn t find yet
Thanks for the replies guys but just to clarify, your both saying -
The lapdock works?
Well of course it works, however much like CM9 it's only going to mirror the video output from the phone right now. However the auto tablet switch is still broken (from what it sounds like, I'm not on CM10 yet.) and Moto's WebTop is obviously still broken as well.
Personally I'm waiting for a version of Paranoid Android based on CM10. Maybe when that hits I can finally switch modes without having to reboot.
Scary Guy said:
it's only going to mirror the video output from the phone right now.
Click to expand...
Click to collapse
I think i could live with that as the browser on the lapdock is only useable if i use it through the phone rather than its own firefox.
So i would just be losing out on screen resolution.
Does JB still have the bug where on the lapdock you get 10 FPS and on the phone its nice and smooth?
Actually I'm getting decent FPS with Paranoid Android. It's still not great but it's WAY better than it was. The start screen for Need for Speed: Shift and it's pretty good. Galaxy on Fire 2 THD works like I expect it to as well. My guess is that it's been fixed in Joker's latest CM9's and yeah CM10 as well.
I doubt it will be perfect until Moto releases ICS officially though (and hopefully they can use something out of that to help with CM10 too).
do the cm 9 ports have hdmi output
back2msg said:
do the cm 9 ports have hdmi output
Click to expand...
Click to collapse
I doubt my lapdock would work if they didn't. Also I've tried the cable with a DVI adapter and that works fine, so yeah.
If you meant CM10, I have no clue yet but I'm getting tired of waiting for a CM10 based parandroid (which is what I'm going to call it for short from now on, because I think it's clever).
I've flashed cm10 and will give my lapdock a try when its charged. The is some mention of changes today but I haven't read the change log.
Sent from my MB860 using xda premium
I just flashed it, didn't even bother with the new gapps yet though. Came over from Parandorid 1.6 and all I did was wiped the caches.
So far no issues but I absolutely HATE the app picker. It was much easier with ICS where you picked it and checked always use if you wanted to. Now you have to pick it and select either just once or always (so two taps instead of one).
Loud sound lapdock
On [ROM] CM10 (JellyBean) for Atrix - 20120729 very loud lapdock sound in mirror mode. What I can do on it?
What do you mean loud? It functions normally for me. Maybe turn down the volume? Sorry you're going to need to be more specific as to what the problem is.
Scary Guy said:
What do you mean loud? It functions normally for me. Maybe turn down the volume? Sorry you're going to need to be more specific as to what the problem is.
Click to expand...
Click to collapse
Very loud minimum volume (level 1).
I tried with both the phone speaker and the stereo system I plug it into and I could not replicate the issue on my end, sorry.
You did check all the volume levels right?
Posting a logcat might help someone. I'd mention the issue in the main thread.
Scary Guy said:
I just flashed it, didn't even bother with the new gapps yet though. Came over from Parandorid 1.6 and all I did was wiped the caches.
So far no issues but I absolutely HATE the app picker. It was much easier with ICS where you picked it and checked always use if you wanted to. Now you have to pick it and select either just once or always (so two taps instead of one).
Click to expand...
Click to collapse
So just to make it clear. You dont have webtop with the flashed rom?
Is there an ICS ROM with working webtop yet?
I only use the Atrix with the lapdock in GB. Is there an ICS ROM with proper support or do I have to wait for the official ICS?
NO ONE has webtop with JB, let alone ICS. If they do they're *******s for hiding it from the rest of us.
The devs are working on it. Official ICS *SHOULD* bring it when it hits (if it hits, which I'm sure it's going to it's just taking forever).
What I'd really like to see is companies release all the source code for their "dead" devices. But it will probably be a cold day on Mercury when that happens.
I don't even have a webtop like interface either, nor will I until paranoid android comes out with a modified CM10 of their own. My hope is then that I can switch DPI without having to reboot.
Scary Guy said:
NO ONE has webtop with GB, let alone ICS. If they do they're *******s for hiding it from the rest of us.
The devs are working on it. Official ICS *SHOULD* bring it when it hits (if it hits, which I'm sure it's going to it's just taking forever).
What I'd really like to see is companies release all the source code for their "dead" devices. But it will probably be a cold day on Mercury when that happens.
I don't even have a webtop like interface either, nor will I until paranoid android comes out with a modified CM10 of their own. My hope is then that I can switch DPI without having to reboot.
Click to expand...
Click to collapse
So I'll just stick with 2.3.4 stock, my lapdock working and wait patiently for ICS.
Mythozz said:
So I'll just stick with 2.3.4 stock, my lapdock working and wait patiently for ICS.
Click to expand...
Click to collapse
so your phone isnt rooted and your lapdock works ok?
I just got one of those 20$ lapdocks from Radioshack and was wondering what are the best ROMs with webtop? Right now I'm using Jokersax' CM9 (but considering switching to epinter's CM10) and just doing HDMI mirroring. I'd prefer to stick with my current ROM if there is some kind of webtop like thing or maybe Ubuntu or Debian that I can install on it. I have an 8GB microSD card and 5 gigs of internal storage left so space is not an issue.
Hi.
You have to install a Gingerbread Blur ROM to have Webtop. Not compatible with any CM.
Only a tablet UI mod (not Ubuntu) with CM10 here: http://forum.xda-developers.com/showthread.php?t=1876790
Personnaly I have Nottachtrix 1.3.1 with WebTopMod, running a full Squeeze up-to-date Debian.
I tested Ubuntop, but the Jaunty Ubuntu is too old and support end since october 2010...
jisse44 said:
Hi.
You have to install a Gingerbread Blur ROM to have Webtop. Not compatible with any CM.
Only a tablet UI mod (not Ubuntu) with CM10 here: http://forum.xda-developers.com/showthread.php?t=1876790
Personnaly I have Nottachtrix 1.3.1 with WebTopMod, running a full Squeeze up-to-date Debian.
I tested Ubuntop, but the Jaunty Ubuntu is too old and support end since october 2010...
Click to expand...
Click to collapse
This is your Nottachtrix 1.3.1 http://forum.xda-developers.com/showthread.php?t=1567241
This is the webtopmod you used ? http://forum.xda-developers.com/showthread.php?t=1093790
Extra question: Does Lapdock used webtop to work? Multimedia dock and lapdock using the same "webtop"? Or multimedia dock and lapdock have different "webtop"?
dotamaple said:
Extra question: Does Lapdock used webtop to work? Multimedia dock and lapdock using the same "webtop"? Or multimedia dock and lapdock have different "webtop"?
Click to expand...
Click to collapse
Two different things.
ravilov said:
Two different things.
Click to expand...
Click to collapse
I see.. Thanks for your reply.
If my Atrix is with ICS/JB. I still can use lapdock features? Just webtop not will work in ICS/JB ROM?
---
Deafcyclist said:
Yes, you should just have mirroring via HDMI to the display. Resolution might not match the screen and looks a little aliased though. GB based rom have webtop and that match the resolution of the screen and makes it look much better.
Click to expand...
Click to collapse
Do you mean i still can use lapdock features after flashed to ICS/JB?
dotamaple said:
This is your Nottachtrix 1.3.1 http://forum.xda-developers.com/showthread.php?t=1567241
Click to expand...
Click to collapse
Yep.
dotamaple said:
This is the webtopmod you used ? http://forum.xda-developers.com/showthread.php?t=1093790
Click to expand...
Click to collapse
Yep. See my last post on that topic for few mods.
---
Deafcyclist said:
You should be able to. Just not with the web top. Though I have heard that JB can be a Little wonky with hdmi mirroring.
I've used jokersax CM9 without issue except for that aliasing issue.
Click to expand...
Click to collapse
Without the Full version of Firefox? :crying:
dotamaple said:
Without the Full version of Firefox? :crying:
Click to expand...
Click to collapse
Yes, without full version of Firefox.
Maybe you should go read up on various HDMI output modes.
Whats this about 20 dollar laptop docks?
ear0wax said:
Whats this about 20 dollar laptop docks?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1793300
Look around the end of the thread.
jisse44 said:
Hi.
You have to install a Gingerbread Blur ROM to have Webtop. Not compatible with any CM.
Only a tablet UI mod (not Ubuntu) with CM10 here: http://forum.xda-developers.com/showthread.php?t=1876790
Personnaly I have Nottachtrix 1.3.1 with WebTopMod, running a full Squeeze up-to-date Debian.
I tested Ubuntop, but the Jaunty Ubuntu is too old and support end since october 2010...
Click to expand...
Click to collapse
So, is there a way to run a full Linux distro without a Blur ROM?
Also, how is your phone's performance on Nottachtrix? What kind of Quadrant scores does it get?
Kanan875 said:
So, is there a way to run a full Linux distro without a Blur ROM?
Also, how is your phone's performance on Nottachtrix? What kind of Quadrant scores does it get?
Click to expand...
Click to collapse
I have 1GHz Faux kernel 026b, so the results are not the best, I prefer longer battery than high performance.
Results are: Total: 2494. CPU: 2748, Mem: 2689, IO: 4605, 2D: 265, 3D: 2162
(Result is 2819 with 1.3GHz Faux kernel)
Kanan875 said:
So, is there a way to run a full Linux distro without a Blur ROM?
Also, how is your phone's performance on Nottachtrix? What kind of Quadrant scores does it get?
Click to expand...
Click to collapse
define "full".
There is a "way" to run a full distro, but you'll be VNCing into it, since the terminal doesn't support a graphical output., anyways, it works alright, video is wonky though, so I wouldn't recommend that, but even openoffice works.
http://linuxonandroid.org/
you can also check the thread here at XDA
http://forum.xda-developers.com/showthread.php?t=1585027
jisse44 said:
Hi.
You have to install a Gingerbread Blur ROM to have Webtop. Not compatible with any CM.
Only a tablet UI mod (not Ubuntu) with CM10 here: http://forum.xda-developers.com/showthread.php?t=1876790
Personnaly I have Nottachtrix 1.3.1 with WebTopMod, running a full Squeeze up-to-date Debian.
I tested Ubuntop, but the Jaunty Ubuntu is too old and support end since october 2010...
Click to expand...
Click to collapse
HI, this post is a bit old now so im sure things have changed a bit, im hoping to get my atrix rooted this week(by my cousin) and want the right rom put on it, im a complete noob and all the threads that ive read about with the lapdock, talk about changing things.
In your experience which rom just works, Id like to be able to use maps, camera and video camera aswell as lapdock.
Any advice is appreciated as ive got headache with trying to read up on all this.
cheers
Joe
I see that the last post to this thread (before mine) is dated 3 years ago and the questions in it went unanswered, so I am doubtful that my question(s) will be seen or answered as well, but here goes.
This is my first post to these forums, so keep that in mind if I make any mistakes, or break any rules. I own 3 Motorola Atrix 4G phones in various states of working, plus the Lapdock, which is IMO brilliant and the main reason for me searching out this phone and buying 2 replacement phones after my first Atrix 4G LCD screen stopped working. In fact, I bought the Lapdock to use with my Raspberry Pi first, then decided I wanted the cell phone to use with the Lapdock. I still like the Atrix 4G, even though it replaced my iPhone (3S I think), which I lost (or it was stolen). My question(s) is/are the same as the OP and title of this thread, now that it is Sept. of 2015, what is the best ROM version and what is the latest version of Android I can use on my Atrix 4G, while still being able to use the Lapdock? I don't care if it means using the Webtop application, or a different Linux for ARM/Android desktop, but I don't want to lose any functionality of the stock cell phone. In fact, I want as much functionality as possible, so on occasions when I need to use the phone and lapdock combination as a temporary replacement for a full computer, I can do so, with reasonable limitations. The main functions I need/want in my Atrix 4G cell phone are: calling (obviously), GPS navigation, calendar, contacts, calculator, camera, taking notes for reminders, and searching the web for locations of things I need to buy, or places I need to go occasionally. I prefer Firefox as my web browser of choice, but can do with any good browser, if Firefox is not available with the best ROM & Android version choice for the Atrix 4G & lapdock combination.
I hope that some members here are still using the Atrix 4G, even though it is an old phone now, and they can give me their recommendations. I bought all 3 of my Atrix 4G phones unlocked and have zero experience at modifying or replacing ROM images on cell phones, but I am willing to learn how to do it, after I know what I will be aiming for with some recommendations. I also have almost zero experience with using Linux, but have checked it out a few times over the last 15+/- years.
Thanks in advance for any advice.
David
aka AmigaDave (Amiga = Commodore computer of 80's & 90's, not Spanish girlfriend)
The leak version works for me
Sent from my LG-E980 using XDA Free mobile app
b088yj said:
The leak version works for me
Sent from my LG-E980 using XDA Free mobile app
Click to expand...
Click to collapse
.
Thanks for the quick reply b088yj.
Since I am new to all of this, can you give me more info on what the "leak version" is and where I can find it? I don't want to assume I can figure out what you mean by "leak version", and end up with results that don't work, or take a chance of bricking my phone.
Is this "leak version" using the Webtop, or some other desktop GUI for when the phone is plugged into the Lapdock? I have no preference to keeping or replacing the Webtop with something else, so long as it "just works", and provides the same functionality, including all features on the phone working (like the finger print reader, sound, camera, etc.).
Also, what steps are needed to install it (if you can just provide me with some links to where I can find the specific information I need to read, I can figure it out for myself, but listing the specific steps you took to install the "leak version" on your Atrix 4G would be really helpful, plus if there is anything needed before, during, or after you install the "leak version" to make it all just WORK).
For example: To install the "leak version" you need to install X number of things on your Atrix 4G, asdfg + hjkl; + zxcvb in the order listed in the step-by-step instructions below.
Step 1: Backup your existing cell phone system, data and contacts using ???
Step 2: Wipe the system using ???
Step 3: Go here (link) and download file/app/utility/etc. abc.xyz
Step 4: Unzip and run, or install app/utility, or ???, on your cell phone/computer to transfer to your cell phone.
Step 5: Using a shell window, enter the following commands [email protected]#$%^&
Step 6: Repeat Steps 3 through 5 for file/app/utility/etc. 2 and 3, which you can find here (link) and here (link).
Step 7: Get on your knees and pray while rebooting your cell phone to see if it all worked
Like I wrote earlier, I have no idea what I need to do, but do have some common sense and can follow clearly written directions, if the person providing them to me does not assume that I know some part of the process and they leave out something they think is obvious and generally known to all cell phone hackers (which I am not to be considered in any shape, way, or fashion).
Thanks again,
David
aka AmigaDave
Edit: I see from your signature, you are using a LG-E980, does that mean that you no longer use your Atrix 4G?
Hi there
I am looking for a rom with the Tablet UI (Like the old stock rom) with support for MHL. I am currently running a stable PAC release but the lack of MHL support is getting annoying. I was perfectly happy with the stock rom but after an upgrade the tablet ui was replaced with the phablet/phone ui which I thought was a step in the wrong direction so i flashed PAC roms until I found my daily driver.
Is there a custom rom that supports both the Tablet UI either through PA or an Xposed module (I have not found one that works so far) and MHL? Or do I have to go back to an old stock rom?
Tablet: SGP311 UK 16GB WIFI
Current ROM: pac_pollux_windy-4.3-20140122
Thanks in advance
phab7
use phab7 with xposed installer.
afaik no custom rom supports mhl, only an old version of cm (don't remember if 9 or 10) wich is not built for pollux_windy
i've gone back to stock for that reason
snlsapkota said:
use phab7 with xposed installer.
Click to expand...
Click to collapse
Have you tested this with a stock rom? I tried phab7 on my PAC rom but it didnt work, I assumed it was because of PA elements in PAC.
Riekr said:
afaik no custom rom supports mhl, only an old version of cm (don't remember if 9 or 10) wich is not built for pollux_windy
i've gone back to stock for that reason
Click to expand...
Click to collapse
Ahh thats a real shame. What stock are you running and have you treid to get the Tablet UI? The new stock UI just makes the buttons really hard to use with two hands and its asif you have a 10 inch phone in your hands!
thebeest said:
Ahh thats a real shame. What stock are you running and have you treid to get the Tablet UI? The new stock UI just makes the buttons really hard to use with two hands and its asif you have a 10 inch phone in your hands!
Click to expand...
Click to collapse
i'm now using latest with kk but didn't try mhl or tablet ui.
mhl is supposed to be supported, regarding tablet ui sony did many modifications to the system ui so the best chance is to try. if you do make a nandroid backup first.
No idea about MHL but none of the kitkat ROMs have the option for classic tablet UI sadly. I don't know why nobody did it considering you can adjust the UI Nav buttons.
The best solution for me is omni ROM so far. You can put the back button to a corner there at least.
Jequan said:
No idea about MHL but none of the kitkat ROMs have the option for classic tablet UI sadly. I don't know why nobody did it considering you can adjust the UI Nav buttons.
The best solution for me is omni ROM so far. You can put the back button to a corner there at least.
Click to expand...
Click to collapse
Google basically killed all the code responsible for the Tablet UI on KK.
Sent from my SGP311 using Tapatalk
Felimenta97 said:
Google basically killed all the code responsible for the Tablet UI on KK.
Sent from my SGP311 using Tapatalk
Click to expand...
Click to collapse
I don't think this is a valid reason considering i allready had tablet UI back on KK. With AOKP and pacman you can add as many nav bar items as you want. I added so many that i simply gave the most right three ones the typical three buttons. Voila i had my tablet UI.
The problem: Since a few updates they render a pacman or AOKP icon on every button you add but don't assigne anything to it wich looks stupid.
Technically there is nothing hindering to get a tablet UI back.
Jequan said:
I don't think this is a valid reason considering i allready had tablet UI back on KK. With AOKP and pacman you can add as many nav bar items as you want. I added so many that i simply gave the most right three ones the typical three buttons. Voila i had my tablet UI.
The problem: Since a few updates they render a pacman or AOKP icon on every button you add but don't assigne anything to it wich looks stupid.
Technically there is nothing hindering to get a tablet UI back.
Click to expand...
Click to collapse
Already back on KK? That's the latest... And, that isn't actually Tablet UI. You just put lots of icons and that moved the main ones to the left. Tablet UI consists of having the whole SystemUI at the bottom, not just the buttons on the left...
You could recreate the whole code, but that would be a bit hard to do...
Sent from my SGP311 using Tapatalk
Felimenta97 said:
Already back on KK? That's the latest... And, that isn't actually Tablet UI. You just put lots of icons and that moved the main ones to the left. Tablet UI consists of having the whole SystemUI at the bottom, not just the buttons on the left...
You could recreate the whole code, but that would be a bit hard to do...
Sent from my SGP311 using Tapatalk
Click to expand...
Click to collapse
I see what you mean - i would be happy with the buttons where one can reach it. The other changes of the UI don't bother me as much.
I can confirm MHL works perfectly fine on SGP312 (wi-fi only) on Android v 4.4.2 stock, and even with Phab7 it wont change to tablet mode for reasons mentioned above. Cant make it show something thats not there.
And a word of advise to people that see those cheap @SS MHL adapters on e-bay... spend the money on a good one or an official one from sony if its still avail... cause I bought a cheap one from china, and now it flickers because the power cord connection is starting to get loose, so now I need to bend the cord back at the connector or the picture will disconnect. Thank god for DUCT TAPE.
Stock CM latest nightly has no mhl support?
Jequan said:
I see what you mean - i would be happy with the buttons where one can reach it. The other changes of the UI don't bother me as much.
Click to expand...
Click to collapse
Have you tried using PIE? I enabled PIE on the left side of my screen using Xposed and Gravitybox and that helps me avoid using those awfully placed (IMO) buttons.
perri.etb said:
Have you tried using PIE? I enabled PIE on the left side of my screen using Xposed and Gravitybox and that helps me avoid using those awfully placed (IMO) buttons.
Click to expand...
Click to collapse
So can you get pie on the latest stock Sony rom? I had LMT working on the old stock rom and got on really well with it. IMHO pie doesn't have as good a functionality as LMT did.
I don't have PC access at the moment so is there a way to flash a stock rom from my current PAC custom rom?
Thanks in advance.
thebeest said:
So can you get pie on the latest stock Sony rom? I had LMT working on the old stock rom and got on really well with it. IMHO pie doesn't have as good a functionality as LMT did.
I don't have PC access at the moment so is there a way to flash a stock rom from my current PAC custom rom?
Thanks in advance.
Click to expand...
Click to collapse
I'm pretty sure you can get pie with xposed+gravitybox but I haven't tried latest stock since everyone complains about it being laggy.
I haven't seen any flashable stock rom so I guess you'll need a computer.
Also I don't even know what's LMT so I can't tell if it's better or worse.
Sent from my XT1053 using XDA Free mobile app
Omni has now tablet ui for pollux_windy (on settings you have dual pane) and MHL support...
varben said:
Omni has now tablet ui for pollux_windy (on settings you have dual pane) and MHL support...
Click to expand...
Click to collapse
That sounds awesome! What version of Onmi are you talking about? I thought MHL was stock only.
perri.etb said:
I'm pretty sure you can get pie with xposed+gravitybox but I haven't tried latest stock since everyone complains about it being laggy.
I haven't seen any flashable stock rom so I guess you'll need a computer.
Also I don't even know what's LMT so I can't tell if it's better or worse.
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the info, shame about needing a PC but with abit of luck omni could be a winner. LMT was like pie but you could add layers of app shortcuts around the edge which gives you fast access to your favourites.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
thebeest said:
That sounds awesome! What version of Onmi are you talking about? I thought MHL was stock only.
Click to expand...
Click to collapse
It was merged on July 23... see this commit on gerrit https://gerrit.omnirom.org/#/c/8645/
And I confirm that MHL is working... I'm using it on OMNIROM
varben said:
It was merged on July 23... see this commit on gerrit https://gerrit.omnirom.org/#/c/8645/
And I confirm that MHL is working... I'm using it on OMNIROM
Click to expand...
Click to collapse
That sounds fantastic. What version are you running and is it stable?
Sent from my SGP311 using XDA Premium 4 mobile app
I`ve tried OmniRom MHL dosen`t work.I`m also looking for a Rom with MHL support