bricked device,please help. - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hello everybody so my story is simple i was trying to install mango on my htc hd2 but after i decide to come back to 6.5 again,but after downgrade i cant boot my phone it just start up and ceep rebooting all the time... any solution for that? i post my bootloader foto so can someone tell me wich ruu is correct for my phone i try few deferent one but all of them give me 262 error. Im nob with this htc, can someone help me? Im happy to donate person who solve my problem....
Sent from my GT-I9100 using xda premium

Bent battery pin? Check carefully
Also, your spl (2.08.0000) is only stock for tmous hd2, not regular,, what did you flash? Full details and step by step list of your actions please.

no answer
samsamuel said:
Bent battery pin? Check carefully
Also, your spl (2.08.0000) is only stock for tmous hd2, not regular,, what did you flash? Full details and step by step list of your actions please.
Click to expand...
Click to collapse
i cant tell anything because my friend do it with me, but he download everything, but he is on holiday now so im no abble to say anythink.... ccan u provide me link to correct ruu??
Ps. battery pin r ok and battery is charged.

"Correct ruu ' depends on the network you got the phone from and if they rom locked it and also the region, so for example an o2 UK phone requires an o2 UK rom UNLESS it came from o2s second batch of hd2s which were rom unlocked but region locked so they use wwe unbranded roms. My point being that it's not as simple as me saying "that one"
However, you could ......
Use hspl4 to apply 3.03.hspl
Flash any 3.14 rom over USB
Re run hspl4 select 3.03.0000

ok,so i flash hspl succesfully like u ask me to do, but when i try to install ruu i get error message all the time, i dont know wich ryuu is correct for my htc. i biught it on ebay unlocked...
Sent from my GT-I9100 using xda premium

What does spl line say In bootloader?
If hspl is really installed, it doesn't matter what ruu you use, that's the point of hspl

spl line
samsamuel said:
What does spl line say In bootloader?
If hspl is really installed, it doesn't matter what ruu you use, that's the point of hspl
Click to expand...
Click to collapse
the spl line say: SPL-3.03.0000 XE

So that's not hspl then, , , if it ends 0000 its a stock spl.
Proves the pointlesness of non specific statements like " I flashed hspl successfully ", , , no you didn't, you USED the hspl program to successfully set the STOCK spl of 3.03.0000
into bootloader
re-run hspl4
choose 3.03.hspl NOT 3.03.0000 and you'll be good to go.

Related

[Q] HSPL help

long story short, put HSPL 2.08 on my TMOUS HD2 so i could use chuckyrom (which did not work.it didnt download as an exe)...i.need.to.take.it.off. ive spent the past day researching how to do it. ive searched this site over, and tried everything, yet when at the bootloader it still says i have cotullaHSPL on it...i need it back to the original so i can send it in for repair. i did not make a copy of whatever file i needed. i have nothing but a phone with HSPL that needs to come off...any help would be greatly appreciated! thanks!
oops duplicate
depends what your original was.
If its a tmous phone, run hspl3 and choose 2.08.0000
if its a regular hd2, run hspl2 and choose 1.42.0000 or 1.66.0000
and of course the rom didnt download as an exe, ,, custom roms never do, they come as an .nbh file, and you put that in a folder with customruu.exe and run customruu.
thanks for the quick response...did what you said...used the HSPL3 download and installed SPL-2.08.0000 and it says the usual MicroP(LED) and such...not sure if that still voids the warranty as the original i had was 1.42 i believe...but it doesnt say HSPL or Coulleta so i should be fine eh? any final way to move it back to 1.42? or will 2.08 work?
DoDaHarry said:
thanks for the quick response...did what you said...used the HSPL3 download and installed SPL-2.08.0000 and it says the usual MicroP(LED) and such...not sure if that still voids the warranty as the original i had was 1.42 i believe...but it doesnt say HSPL or Coulleta so i should be fine eh? any final way to move it back to 1.42? or will 2.08 work?
Click to expand...
Click to collapse
if it was 1.42.0000 then you should use hspl2 and set it to 1.42.0000 else yes, they will know you've been messing. 2.08.0000 only ships with tmous phones, and the only way you could possibly get 2.08.0000 on your phone is by using hspl.
(HSPL3 is really for tmous customers, use hspl2 to return yours to stock)
downloaded HSPL2 and tried to downgrade from 2.08 back to 1.42...it just went to an error message saying bad device ID (or something like that) also just tried putting the RUU_signed.nbh on my sd card, renaming to LEOIMG.nbh and starting in bootloader...it goes to a white screen that says loading... and thats it...is it stuck? any other option?
DoDaHarry said:
downloaded HSPL2 and tried to downgrade from 2.08 back to 1.42...it just went to an error message saying bad device ID (or something like that)
Click to expand...
Click to collapse
you got a telstra phone?
also just tried putting the RUU_signed.nbh on my sd card, renaming to LEOIMG.nbh and starting in bootloader...it goes to a white screen that says loading... and thats it...is it stuck? any other option?
Click to expand...
Click to collapse
what rom you trying to use? also, i think spl 2.x wont allow itself to be downgraded to 1.x this way (though im not 100% sure on that)
nope...its just a standard Tmobile USA HD2...i made the mistake of trying to hack it and put HSPL 2.08 on and need to return it but that voids warranty...so i need to take it off...right now its showing it has just spl 2.08 and the regular boot screen...no hard spl, just standard...will that be ok?
DoDaHarry said:
nope...its just a standard Tmobile USA HD2...i made the mistake of trying to hack it and put HSPL 2.08 on and need to return it but that voids warranty...so i need to take it off...right now its showing it has just spl 2.08 and the regular boot screen...no hard spl, just standard...will that be ok?
Click to expand...
Click to collapse
ahhhh ok, well then no, it never did have 1.42, 1.x only ever ships on regular leos.
not sure if that still voids the warranty as the original i had was 1.42 i believe
Click to expand...
Click to collapse
yes, 2,08.0000 will be fine.
awesome! thank you! the whole thing started when the first HD2 failed...so Tmo sent me another one...i managed to fix #1, and also killed and installed HSPL on the second one...so i would either have to remove it, or send my good one back and keep the broken one...my first one (thats working is showing it has spl 2.10 (my bad, i thought it was 1.42) so i only need to downgrade from 2.08, to 2.10...but if spl 2.08 wont void it and itll be fine, then im happy...thanks again!

[Q] HD2 Completely locked down

I have been searching and googling for over 2 hours straight and cant find any solution to my problem:
I was going to install the Custom HD2 Android. But my radio was to old. so I decided to update it with the newest rom.
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
So now I cant get passed a screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
I'm starting to believe there is nothing I can do.. Cant access my sd card when plugged to the pc or nothing..
Is there ANYTHING someone can help me with?
I believe your problem lies with SPL 3.03. I don't think even the latest HSPL will work. I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
juggs said:
I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
Click to expand...
Click to collapse
won't work on none tmous phone because spl 3 won't let itself downgrade to spl1. just like spl2 wouldn't downgrade to 1.
the tmous users CAN downgrade from 3 to 2, but there are no spl2 roms for none tmous users.
@OP
if you have a tmous phone then flash a stock tmous rom from sd card.
if you have a normal hd2 then you are stuck on spl3 until hspl gets updated.
EDIT - my answer was incorrect, I was being wary until someone confirmed the spl CAN be downgraded by flashing a correct stock rom for your phone (USB is fine), or by using a goldcard.
Leffernan said:
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
Click to expand...
Click to collapse
you flashed the 3.x rom from sd card. the first thing an sd card flash does is remove hspl, and replace it with stock spl. next, the rom checks that the phone matches the rom, which in your case it doesn't, so it stops and fails.
you could try forcing an spl 2.08.0000 tmous rom on it using goldcard, in the hope it will then allow you to run hspl2.
But all of this requires me to have access to my sd card? I don't have that :\
ah ok.then its time to wait for the next hspl version to support spl3.x
Would it be too much to ask if you could send me a pm or a mail at [email protected] whenever that happens? Probably going back to a good old Sony Ericsson in the meantime, hehe
i'd like to say yes, but it could be several weeks, and i can barely remember to feed myself from one day to the next, so..... heh.
however When it does come out, it will be hard not to notice, just skim the latest thread titles every day or two.
edit - oh, and don't give up just yet, I could be mistaken, its not unusual!. i haven't touched the 3.x rom/spl yet, so i could be wrong.
this thread, for instance,
http://forum.xda-developers.com/showthread.php?t=814838
suggests that the spl CAN be downgraded. reports are still confused.
you could for instance try flashing the 3.x rom over usb using SSPL, and then you'd at least have a working phone.
EDIT - MY RESPONSES IN THIS THREAD WERE NOT BASED ON ALL THE INFORMATION WE NOW HAVE REGARDING SPL 3.03
THE 3.03 SPL CAN BE DOWNGRADED EASILY BY USING THE CORRECT STOCK ROM FOR YOUR PHONE, FLASHED EITHER USB OR SD CARD.

new spl

Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
anubis1126 said:
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
Click to expand...
Click to collapse
There is no HSPL version present yet who is compatible with SPL 3.03
We need to wait sir
Ow Ps, do you have a Branded UK Orange device?
no its unbranded
Any updates on hspl for this yet
if its unbranded just flash a stock 1.66 to downgrade the spl then hspl as before.
Hi. I am on 3.14, i would need to downgrade too...
would this file i found online be good? :
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 ¶
7U_2.06.51.07_Ship
Its 1.66.404.1 but not 1.66.0000.. is this a problem?
I need to find a stock rom on NLD (dutch) to downgrade before putting my HSPL... Why is it so hard to find an original file from factory, say 1.42 in everylanguage?
And what is the difference by downgrading to 1.42 or 1.66?
Thank you kind sirs
1.66.404.1 is rom version,,, 1.66.0000 is the spl version.
yes that rom should be fine assuming you have an unbranded hd2. doesn't matter which you downgrade to, they both will allow hspl.
its not at all difficult to find them.
look for "leo official roms" thread, in rom development section, and in there, first post first link takes you to most of the roms.
Samsamuel, thx a lot for that positive answer HD2 is indeed unbranded.
makes me feel better, been in despair with my dutch HD2...
So its finally clearer to me, 0000 is SPL and XXX is rom version
But to Downgrade, a non SPL version is ok then?
But to install HSPL, i need an SPL version?
And one last thing, can i install all of this stuff without booting from SDmini?
Those were the old procedures, no?
Thx!
all stock roms come with a version of spl, but it doesn't say which spl in the filename.
1.43 and 1.48 roms come with spl 1.42.0000
1.66 and 1.72 roms have spl 1.66.0000
3.14 comes with spl 3.03.0000 and hspl doesn't work with it.
the numbers you see in the filename are rom (1.66.404.1) and radio (2.06.51.07) versions, not spl.
when you look in bootloader at spl, it will always end either .0000 or .hspl where 0000 is stock.
it doesn't matter which spl you have, so long as it isn't spl 3.03 then hspl will work and allow you to flash roms andradios.
Thx! Even clearer now
Unfortunately, i am currently on 3.14.. i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
How can i downgrade to those versions who enable me to use HSPL? Once u have a higher rom, it detects lower and u cant downgrade?
Is the only method to flash with SDcard?
zewill said:
i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
Click to expand...
Click to collapse
Then that isn't your stock rom. (Although you didnt say why it didnt work, , ) if its teh right rom it will work
I think i managed to install my English pack allright!
I installed the earliest official pack from HTC, rom 1.48
Then installed HSPL3, then my official HTC WWE 3.14 rom!
Confirmed, it works!!!
Again, Thank you for your time and your explanations of roms!
See you around on the forums, mate!
dont smile too soon, if you flashed a 3.14 rom whilst spl is installed then you will have memory and stability issues.
Go to
settings menu all settings system memory, what does it show for free program memory? around 50meg? should be about 140.
Couldnt really find "memory settings" but what if ound was this:
Total storage: 176 mb
Used storage 56
Free storage 119 mb
TOtal programm 208 MB
Used program 163 mb
free programm 45 mb
NO SD CARD (must buy one tomorrow lol)
So, as u said, its around 40 mb.. What should have i done better?
Also, what is the difference in the SPL?
I mean, from factory settings, i upgraded to 3.14.
With HSPL, i upgraded to 3.14
What difference does it make, isnt it the same? Doesnt 3.03 spl install itself?
Anyways, will be glad to hear your comments on my new problem then haha
not through usb flash. If hspl is installed it remains installed.
3.14 roms must have spl 3.03.0000
Before the 3.14 roms it didnt matter, all roms worked on any version spl, but the 3.14 roms dont.
You should have removed hspl first, (so that your spl ends .0000) then flashed the 3.14 rom, , this allows it to upgrade spl to 3.03.0000
Hhm, i really dont wanna brick my HD2 with all those stability issues.. is there a risk if i leave it like that?
Anyways, i'll restart the instalations then. I checked on bootloader, currently this is what i have: SPL-2.08 HSPL 8G XE
How should i proceed? Should i flash from SD card a 3.14 directly WWE? I have nothing yet on my HD2, (using 3.14 WWE official rom from HTC website) so i dont really care about flashing, reinstalling, hard resets
Just give me advice on how to proceed to have the perfect installation
Is a flash from SD card obligatory? But that would get rid of HSPL, no? and if i get rid of HSPL, my HD2 is going to go back to its original language (DUTCH), right? I want to avoid putting my HD2 in that language...
Say, if i SDFLASH the latest rom WWE (even though my HD2 previously to HSPL only accepted NLD (hence dutch) roms), will it work?
Sorry for taking up so much of ur time, but ur comments are so helpful
connect to usb, put the phone in bootloader.
then
run hspl2
choose 1.66.0000
when phone reboots, quickly hold voldown to reenter bootloader
run the 3.14.exe
Thx for the quick reply.
Why would i use HSPL 2 now, i was using the HSPL 3 before? Isnt it the latest most stable one tu use?
Can i still run HSPL3 and choose 1.66? (i think not actually i only had choice of 2.08)..
So can i run HSPL3 and then re run with HSPL2??? It wont have compatibility issues?
And how to install the exe while in bootloader? Is it a flash from SD Card?
What will happen if i leave my 3.14 in the 2.08 SPL? only stability issues? No risk of bricking, or long term affecting negatively the phone?
So many questions.. hope u can answer all of them..
Also, one last big question: Now that HSPL is installed, isnt it easier to simply, when i recieve my SD card, to flash a WWE official rom 3.14? wouldnt that do the trick? Or i need to go through HSPL2 for sure?
Thx again!
the .exe's are just installers, the spl/hspl inside is the same. So, the 2.08.hspl in hspl3, the actual code that gets flashed to your bootloader, is IDENTICAL to 2.08.hspl in hspl2.
But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason.
Oh, and whilst we're at it, hspl2 detects which spl you currently have and offers you the opposite (so if it finds 1.42.0000 it sets the dropdown to 1.42.hspl)
HSPL3 doesnt do this, it always offers you 2.08.0000 until you manually change it, and many a newb has just clicked OK and thinks they have installed hspl, when in fact they haven't.
Lol, i be one of the many noobs.. But in my bootloader, it says i have installed HSPL, so.. i guess its installed!
Will follow your recommendations, but just one last thing
How to remove this current HSPL3 then and restart the steps with HSPL2? You said that
"But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason"
I used HSPL3 because i read on forums thats its better to use the latest HSPL as the previous versions usually are out of date.. seems i was mistaken then... Also, i used HSPL3 because it was compatible with any 1.XX rom, and i could only downgrade as low as 1.48. Would HSPL2 be able to be installed on 1.48 official rom? I thought highest HSPL2 could work on was 1.42?
So you say that now that i have installed HSPL3, i cannot go back to stock? Im sure there would be a way, but what should i do then?
Should i just flash some stock rom from SD card, hoping it takes HSPL3 away, and restart procedure with HSPL2?
Or with USB sync i can restart the procedure, by just openiong HSPL2 without touching any rom?

help Is there a way to break hspl 3.03.0000 there? plz plz plz plz plz plz plz plz

hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore

question about htc hd2 leo?

Hi, i have an HTC HD2 with ROM version 1.72.161.3 and Flash 512 MB and need to flash it russian. I also have russian rom file 1.66.411.2 and have HSPL2 also. I need to know if i can run HSPL2 on this phone and flash with this russian file? Thanks in advance.
Yea. Hspl first,, then flash over USB.
Boot into bootloader and look to see what SPL version you have. If it is one of the below SPL versions then you can flash HSPL 2 to youe HD2.
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
Hi, i flashed it to RUU_Leo_HTC_RUS_1.66.411.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe and now i have "Your OS ROM isnt customized for your hardware". Forgot to mention my phone is vodafone. Help
That means you can not use that ROM on your HD2 as it did not come from the area of the world that HD2s that used that ROM were shipped to. Official ROMs are very much area or country specific. If you can find a official ROM from htc.com that is for your HD2 that says WWE in the name it will more than likely have Russian in it, you will just have to go into settings and set it to Russian. Use your serial number on the HTC site to get a list of official ROMs that are for your HD2 Look behimd your battery for your serial number.
Well, i switched on the phone and flashed it, didnt go to bootloader berfore flashing. Could that be the problem?
andrew21 said:
Well, i switched on the phone and flashed it, didnt go to bootloader berfore flashing. Could that be the problem?
Click to expand...
Click to collapse
Naw if you had a ActiveSynce connection you are good. I suggest you always manually put your phone into bopotloader because it will save you some time and it keeps you bootloader from timing out because the RUU takes to long to start the flash for some reason. Plus it bypasses some of the checks the Ruu runs that might keep you from flashing.
Did you hspl first? If yes, did you make the noob error of choosing a x.xx.0000 instead of x.xx.hspl?
Also, you can't flash from SD card in this situation.
Region shouldn't be a problem, but in the past I have seen occasional (rare) mention that Russian is the one region that can cause issue.
Go back to working rom, use psas to get a cid for an SD card, send it me with an email address and ill make you a goldcard. (Assuming re trying hspl doesn't do it)
Thanks everybody for your help...i downloaded RUU_Leo_Vodafone_UK_1.72.161.3 file and repaired the phone. I also gave the phone back to my friend as i dont want to brick the phone.

Categories

Resources