question about htc hd2 leo? - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi, i have an HTC HD2 with ROM version 1.72.161.3 and Flash 512 MB and need to flash it russian. I also have russian rom file 1.66.411.2 and have HSPL2 also. I need to know if i can run HSPL2 on this phone and flash with this russian file? Thanks in advance.

Yea. Hspl first,, then flash over USB.

Boot into bootloader and look to see what SPL version you have. If it is one of the below SPL versions then you can flash HSPL 2 to youe HD2.
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000

Hi, i flashed it to RUU_Leo_HTC_RUS_1.66.411.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe and now i have "Your OS ROM isnt customized for your hardware". Forgot to mention my phone is vodafone. Help

That means you can not use that ROM on your HD2 as it did not come from the area of the world that HD2s that used that ROM were shipped to. Official ROMs are very much area or country specific. If you can find a official ROM from htc.com that is for your HD2 that says WWE in the name it will more than likely have Russian in it, you will just have to go into settings and set it to Russian. Use your serial number on the HTC site to get a list of official ROMs that are for your HD2 Look behimd your battery for your serial number.

Well, i switched on the phone and flashed it, didnt go to bootloader berfore flashing. Could that be the problem?

andrew21 said:
Well, i switched on the phone and flashed it, didnt go to bootloader berfore flashing. Could that be the problem?
Click to expand...
Click to collapse
Naw if you had a ActiveSynce connection you are good. I suggest you always manually put your phone into bopotloader because it will save you some time and it keeps you bootloader from timing out because the RUU takes to long to start the flash for some reason. Plus it bypasses some of the checks the Ruu runs that might keep you from flashing.

Did you hspl first? If yes, did you make the noob error of choosing a x.xx.0000 instead of x.xx.hspl?
Also, you can't flash from SD card in this situation.
Region shouldn't be a problem, but in the past I have seen occasional (rare) mention that Russian is the one region that can cause issue.
Go back to working rom, use psas to get a cid for an SD card, send it me with an email address and ill make you a goldcard. (Assuming re trying hspl doesn't do it)

Thanks everybody for your help...i downloaded RUU_Leo_Vodafone_UK_1.72.161.3 file and repaired the phone. I also gave the phone back to my friend as i dont want to brick the phone.

Related

RAPH Paper weight - SPL

Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.

[Q] HD2 Completely locked down

I have been searching and googling for over 2 hours straight and cant find any solution to my problem:
I was going to install the Custom HD2 Android. But my radio was to old. so I decided to update it with the newest rom.
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
So now I cant get passed a screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
I'm starting to believe there is nothing I can do.. Cant access my sd card when plugged to the pc or nothing..
Is there ANYTHING someone can help me with?
I believe your problem lies with SPL 3.03. I don't think even the latest HSPL will work. I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
juggs said:
I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
Click to expand...
Click to collapse
won't work on none tmous phone because spl 3 won't let itself downgrade to spl1. just like spl2 wouldn't downgrade to 1.
the tmous users CAN downgrade from 3 to 2, but there are no spl2 roms for none tmous users.
@OP
if you have a tmous phone then flash a stock tmous rom from sd card.
if you have a normal hd2 then you are stuck on spl3 until hspl gets updated.
EDIT - my answer was incorrect, I was being wary until someone confirmed the spl CAN be downgraded by flashing a correct stock rom for your phone (USB is fine), or by using a goldcard.
Leffernan said:
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
Click to expand...
Click to collapse
you flashed the 3.x rom from sd card. the first thing an sd card flash does is remove hspl, and replace it with stock spl. next, the rom checks that the phone matches the rom, which in your case it doesn't, so it stops and fails.
you could try forcing an spl 2.08.0000 tmous rom on it using goldcard, in the hope it will then allow you to run hspl2.
But all of this requires me to have access to my sd card? I don't have that :\
ah ok.then its time to wait for the next hspl version to support spl3.x
Would it be too much to ask if you could send me a pm or a mail at [email protected] whenever that happens? Probably going back to a good old Sony Ericsson in the meantime, hehe
i'd like to say yes, but it could be several weeks, and i can barely remember to feed myself from one day to the next, so..... heh.
however When it does come out, it will be hard not to notice, just skim the latest thread titles every day or two.
edit - oh, and don't give up just yet, I could be mistaken, its not unusual!. i haven't touched the 3.x rom/spl yet, so i could be wrong.
this thread, for instance,
http://forum.xda-developers.com/showthread.php?t=814838
suggests that the spl CAN be downgraded. reports are still confused.
you could for instance try flashing the 3.x rom over usb using SSPL, and then you'd at least have a working phone.
EDIT - MY RESPONSES IN THIS THREAD WERE NOT BASED ON ALL THE INFORMATION WE NOW HAVE REGARDING SPL 3.03
THE 3.03 SPL CAN BE DOWNGRADED EASILY BY USING THE CORRECT STOCK ROM FOR YOUR PHONE, FLASHED EITHER USB OR SD CARD.

[q] spl 3.03.0000

Morning.
Is there a method to revert back to an old SPL from 3.03.0000 ?
I have searched and searched but to no avail yet. I have tried HSPL2 and 3. I have read that applying a old stock from from SD card does not work either.
The situation is that my HD2 has come back from warantee repair (overheating/reboot issue) and is running SPL 3.03 with their stock rom. This means that I cannot run a lightweight windows rom and therefore cannot properly run my favourite Android rom(s).
I have read a few people in the same boat so thought I would create a new thread as I couldn't find one yet.
Thank you so much.
Yans.
Hello!
I've had this problem too. You have to flash an ORIGINAL ROM from HTC homepage for your device. You will need the serial number (under the battery) of your HD2. Flash the Original Rom that you downloaded from HTC. After this you will have the old SPL version on your HD2.
Hackedieter said:
Hello!
I've had this problem too. You have to flash an ORIGINAL ROM from HTC homepage for your device. You will need the serial number (under the battery) of your HD2. Flash the Original Rom that you downloaded from HTC. After this you will have the old SPL version on your HD2.
Click to expand...
Click to collapse
* Please note that this upgrade will erase any data stored on the device. Once you proceed with the upgrade, the system can not be downgraded again.
I think theres no normal way (means u cant downgrade official roms, without hspl) of downgrading. U have to use hspl, if it capable of removing the 3.03 spl. If HSPL2-3 cant do that, u have to wait for the new hspl.
Correct me if im wrong.
spl 3.03.0000
Hallo
Install the old original Htc Rom on your HD2 from your PC.
tdi2461 said:
Hallo
Install the old original Htc Rom on your HD2 from your PC.
Click to expand...
Click to collapse
As i told u guys before. U cant install official roms via activesync. Theres only 1 way and that is HSPL.
U cant downgrade officials rom via activesync or sd card.
* Please note that this upgrade will erase any data stored on the device. Once you proceed with the upgrade, the system can not be downgraded again.
The only way is HSPl.
Hi.
Don't be fooled.
I have upgraded and downgraded, and upgraded and downgraded and upgraded again using only the .exe files downloaded from htc.com
Look at this post:
http://forum.xda-developers.com/showpost.php?p=8704559&postcount=26073
Originally Posted by Dic3ptor View Post
is it possible to flash a 1.66 stock ROM after upgrading to 3.14 and install HSPL again? Or must i stay at the new stock 3.14 after flash it ones.
Let me check for you....
EDIT:
Just went back to spl-1.42.0000 by just flashing to 1.48 stock WWE rom.
So I guess you can go back to any rom easily.
Now flashing back to 3.14....
TwanVeugelers said:
Hi.
Don't be fooled.
I have upgraded and downgraded, and upgraded and downgraded and upgraded again using only the .exe files downloaded from htc.com
Look at this post:
http://forum.xda-developers.com/showpost.php?p=8704559&postcount=26073
Originally Posted by Dic3ptor View Post
is it possible to flash a 1.66 stock ROM after upgrading to 3.14 and install HSPL again? Or must i stay at the new stock 3.14 after flash it ones.
Let me check for you....
EDIT:
Just went back to spl-1.42.0000 by just flashing to 1.48 stock WWE rom.
So I guess you can go back to any rom easily.
Now flashing back to 3.14....
Click to expand...
Click to collapse
Copied that stuff from HTC.COM
Flashing without HSPL? Via activesync?
dictator4 said:
Copied that stuff from HTC.COM
Flashing without HSPL? Via activesync?
Click to expand...
Click to collapse
Of course you can downgrade.
What they mean is that your data is permanently lost. Nothing else.
dictator4 said:
Copied that stuff from HTC.COM
Flashing without HSPL? Via activesync?
Click to expand...
Click to collapse
Downloaded the Roms through the support part of HTC.com
Connect phone with activesync.
Run downloaded .exe
That's it.
Easy as that.
If HTC.com does not take your serial (IE branded phone) look at this topic for the new rom:
http://forum.xda-developers.com/showpost.php?p=8725893&postcount=26187
And here for older stock rom:
http://forum.xda-developers.com/showthread.php?t=577717
TwanVeugelers said:
Downloaded the Roms through the support part of HTC.com
Connect phone with activesync.
Run downloaded .exe
That's it.
Easy as that.
If HTC.com does not take your serial (IE branded phone) look at this topic for the new rom:
http://forum.xda-developers.com/showpost.php?p=8725893&postcount=26187
And here for older stock rom:
http://forum.xda-developers.com/showthread.php?t=577717
Click to expand...
Click to collapse
Well, i remember i tried to downgrade once, and i got a message, that i have newer rom, so it cant downgrade.
But i belive u, and still htc says its not possibile.
Thank you
Thank you everyone for your assistance. i am back on HSPL 2.08.
I already had the stock rom from HTC website because I put it on to send the phone back for repairs. I put this back on a moment ago and it put SPL 1.42 back on, PERFECT!
The only reason I didn't do this before (after reading other posts) is because when I did this initially (for sending the phone back) it didn’t touch the SPL but now I realise this was down to the fact it was running HSPL and not SPL.
So I have now incremented SPL 1.42 to HPSL 2.08 and running ChuchDroid for my lovely Android rom. Excellent.
Thank you all
Yans.
Go to your local HTC.com website,go to the support page,look for ROM upgrades for your device(HD2),if the old ROM is removed from the website you most probably wont be able to downgrade,now if you find there 2 ROM updates,say like 3.14.xxx and 166.XXX,chose the older version and enter your S/N if accepts its good to go
Hey guys. Im having this problem over at this thread: /showthread.php?t=814656
My problem is that Activesync does not detect my phone. So I can't downgrade.. But if I somehow get one of the official ROM's (say 1.48) and get the .nbh file onto the sd card, could that work?
YES I DID IT!! Multi card reader for the win!
Flashed WWE rom below but SPL still shows old one HSDL 1.42
Should it not upgrade to SPL 3.03?
"RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
murattiss said:
Flashed WWE rom below but SPL still shows old one HSDL 1.42
Should it not upgrade to SPL 3.03?
"RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Click to expand...
Click to collapse
it wont upgrade it whilst hspl is installed unless you flash from sd card.
will it upgrade when I revert back to SPL 1.42 or 1.66 with HSPL2 tool?
murattiss said:
will it upgrade when I revert back to SPL 1.42 or 1.66 with HSPL2 tool?
Click to expand...
Click to collapse
yes it should, but only if your phone is an unbranded wwe one, else it won't flash.
yeeyyyyyyy thank you so much guys...with your help i could get back to 1.42. from 3.03 now im gonna look for some nice wm and android roms thank you so so much guys you made my day
Great to know.
My HD2 died with an unresponsive touchscreen, whilst having hspl 1.42 on.
I got the latest ROM off HTC with my serial, flashed with EXE but HSPL was not overwritten, so I thought that flashing through activesync didn't upgrade the SPL.
Hence I flashed latest rom via microSD and I got the SPL 3.03 there, sure that there was a HSPL for that too.
When I realized there wasn't, I was left with the nightmare of getting back from warranty a bloathed system I couldn't get back to operating conditions.
Now I discover that all it takes to downgrade SPL 3.03 is running the official exe for your device off an older ROM.
Nice.
H-KaN said:
yeeyyyyyyy thank you so much guys...with your help i could get back to 1.42. from 3.03 now im gonna look for some nice wm and android roms thank you so so much guys you made my day
Click to expand...
Click to collapse
Dear friend;
i would like to know how did you down grade spl?

[Q] Problem with Stock Rom SPL 3.03.0000

[SOLVED] Just Flashed the correct official ship rom from HTC site using my HD2 Serial Number... It works like a charm. SPL has downgraded to 1.46
Thanks everyone who helping...
Just Flashing Stock Rom RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe, I got stuck in bootloder.
- Error 294 Invalid Vender ID
- SPL 3.03.0000 can't HSPL-ed with HSPL3, SPL 3.03 is't listed as supported SPL
Flashed RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, still stuck on bootloader.
- Error 294 Invalid Vender ID
- SPL 3.03.0000
- on boot loader screen said: Update fail code error, please try again
Try to get stock rom from HTC official site, but no rom suitable for S/N I entered.
Need help, is there any workaround for it?
Thanks
Edit 1: I Tried this one http://forum.xda-developers.com/showthread.php?t=606713 but also not working...
Edit 2: I visit again this site http://www.htc.com/sea/SupportDownload.aspx?p_id=297&cat=2&dl_id=1063 and put my Serial Number and it has the Official Rom for my S/N (yesterday maybe i put the wrong letter or number), downloading now, let see how it works...
Same thing happening on mine too.. Not able to downgrade stock spl 3.14 to any other lower spl. i tried flashing various shipped roms with spl 1.66, 2.07, 2.10 etc.. no luck.. Does anyone know what to do for this problem???
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
brizzo said:
same issue, been trying to get it back for days. i think my problem is the radio, i can'r get it to reflash now.
Click to expand...
Click to collapse
hi guys , u need download ur original room ( stock room ) and flash in normal way . after that ur spl is 1.66 or 1.42 depend ur network , after that u ready to upgrade with the rom u want .
Hello to everyone, the problem you mention isn't related to the stock ROM 3.14 but are related to the users who are flashing a non compatible aria ROM.
So my instructions to you are the follow use the stock rom that came from your aria; download the right stock rom from the HTC webpage by using YOUR S/N.
Moved thread to the right section.
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Hi All,
I was facing this same issue for a long time with respect to the 3.03 ROMS.... Yesterday while searching for a solution, I found a website which hosts all types of Shipped ROMS ever published... Just select the ROM belonging to your region from there and Flash it... that will downgrade your SPL to the lower versions... (I personally flashed the 1.48 series ROM for INDIA which is available in that list and now am using WP7 ROM by DFT.... )
Hope this Helps !!!! CHEERS !!!
Please find the URL for India 1.48 series ROM below
P.S. You will find all roms on this website... just do a Ctrl+F for your country on the list of the ROM page.
LINK
brizzo said:
yep tried that, flashed RUU_Leo_Vodafone_DE_1.72.162.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
i ran it from the sd card and everything said ok but still only loads to tricolour bootloader. i think it has something to do with the radio...won't update from RUU (been using LeoAdvancedRUU 1.03) or sd.
think i'm screwed...
Click to expand...
Click to collapse
Dont give up man... as long as your HD2 can enter the bootloader its still can be saved...
i am going to try goldcard but i think i have a hardware problem...i'm getting I2C error.
googled it and i'm pretty sure it is going back to the shop. anyway thanks to everyone for your help!

[Q] Need some help ref: removong HSPL

My HD2 needs to go in for repair so I need to remove HSPL and flash a stock WinMo ROM ready for monday when it is getting collected.
I have followed the instructions here - http://forum.xda-developers.com/showthread.php?t=623402 but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Would someone be kind enough to enlighten me here as I have to sort this before Monday.
Cheers in advance
Bry.
Bryski said:
but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Click to expand...
Click to collapse
the quick flash is the bootloader looking for a valid file, and usually means one of a few things..
1 - the file isn't correctly named leoimg.nbh
2 - you simply renamed the htc_wwe_blahblah_.exe to leoimg.nbh instead of extracting ruu_signed.nbh and renaming THAT.
3 - you are using an sd card bigger than 4gb (not always the case, but most times bigger cards fail)
4 - the card is formatted FAT16 instead of FAT32
5 - hspl isn't installed after all and the ROM is not a match for the phones ROM/region lock. (what does the spl line say in bootloader?)
try those, see if it resolves it.
fix
go to http://forum.xda-developers.com/showthread.php?t=611433 and on the 4th post there is a zip at the bottom download unzip and run and just choose the non hspl
what hspl are you running?
Ok tried again and the bootloader screen looks like this
thats the right on but the last line about the touch is different i have 50 instead of 40
Any reason why it would be different?
Wanna make sure its dont right, dont want em sending it back and telling me I have hacked it
That's only a valid spl if you have a tmous,,,, if you have a regular hd2 then any spl starting 2 is wrong. Only tmous roms use 2.x spls.
Its a UK O2 phone mate, what have I done wrong then?
Bryski said:
Its a UK O2 phone mate, what have I done wrong then?
Click to expand...
Click to collapse
Well without scanning back through the thread, I'm guessing you had 2.08.hspl installed and ran hspl2 or 4, which will have defaulted to the opposite, namely 2.08.0000,
Or,you SD flashed a tmous stock rom, which didn't initially fail because hspl was installed, but then failed to continue to flash after the spl had changed because hspl was no longer there.
Fix - run hspl2 (hspl2 is the most usefull for us reg Leo users) and choose a matching spl to the rom version installed ...
Rom ....... spl
1.43 ....... 1.42.0000
1.66 ....... 1.66.0000
3.14 ....... 3.03.0000 -- you would need to use Hspl4 for this.
If the phone is buggered and wont boot, then it doesn't really matter which you choose, so long as it's one of those three.
(And in fact it probably wouldn't matter even if the rom and spl don't match,, they're only really interested in the spl, just nice to be cautious,would be a pain to have it sent back on a technicality)
Phone boots but I cant do anything with it due to the screen freeze which is why its going back to HTC.
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Bryski said:
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Click to expand...
Click to collapse
You're using the wrong hspl.exe, its v1 that requires 1.42 to work,,,try again.
Ok I think I got it
I should flash the latest ROM again aswell really as they asked me to do that when I rang em yesterday
All sorted and upgraded to the latest ROM ready to go back to HTC.
Cheers mate saved me a lot of heartache
Welcome...
while on this topic, im using Leo_RADIO_2.15.50.14** via HSPL
now i wish to return to my stock (which i am pretty sure is this :
RUU_Leo_HTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
(i copied down these details when i got my phone on the first day)
do i need to roll down to Radio 2.05.51.05_2 ?
i cant seem to get this ROM installed, whether its 1.42 SPL or 2.08 HSPL
i removed HSPL, and definitely not a TMOUS hd2 but cant install the stock rom

Categories

Resources