This morning I was transferring a couple files from my computer to my phone sd card via usb, something I've done a million times. All of a sudden I heard that sound the computer makes when you disconnect via usb and my screen went black. So I disconnected the usb cable and pushed the power button to wake it. No dice. So I held the power button in like I was turning it on. No response. I let it sit for a while, still nothing. I can't boot into recovery or anything. It's like the phone has no power what so ever. The phone had a full charge, so the battery is not dead. When I plug the phone into the charger, the indicator does not come on.
Any ideas? Am I bricked just from a transfer????
sofla2 said:
This morning I was transferring a couple files from my computer to my phone sd card via usb, something I've done a million times. All of a sudden I heard that sound the computer makes when you disconnect via usb and my screen went black. So I disconnected the usb cable and pushed the power button to wake it. No dice. So I held the power button in like I was turning it on. No response. I let it sit for a while, still nothing. I can't boot into recovery or anything. It's like the phone has no power what so ever. The phone had a full charge, so the battery is not dead. When I plug the phone into the charger, the indicator does not come on.
Any ideas? Am I bricked just from a transfer????
Click to expand...
Click to collapse
try PWR + VOL UP for 10 seconds. I once had this happened during a call. Fully charged nothing wrong with it and it just died on me.
I did the above and after several tries it just turned itself on, on its own. Don't loose hope!
Sounds like brick to me but just for hellvof it plug into pc and see if windows picks it up tell me what it says if it does
Sent from the euphoric state of my mind
I tried the PWR + VOL UP several times, nothing. It's hard to describe the sounds my computer makes, but normally when I plug into usb it make a loud ding DING sound. When I plug the phone in now, it just makes a low pitched du du sound. But, it does make the normal sound when I unplug it.
When you plug into windows does it try to install QHSUSB_DLOAD driver?
d2kss2250 said:
When you plug into windows does it try to install QHSUSB_DLOAD driver?
Click to expand...
Click to collapse
Nope
Check device manager when its connected to PC. If it shows that Q blahblah USB chances are its bricked. Good luck man, hope it comes back
Sent from my EVO using xda app-developers app
corcgaigh said:
Check device manager when its connected to PC. If it shows that Q blahblah USB chances are its bricked. Good luck man, hope it comes back
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
It shows QHSUSB_DLOAD
And I just found this post: http://forum.xda-developers.com/showpost.php?p=27775879&postcount=9
Looks like I'm off to Sprint
sofla2 said:
It shows QHSUSB_DLOAD
And I just found this post: http://forum.xda-developers.com/showpost.php?p=27775879&postcount=9
Looks like I'm off to Sprint
Click to expand...
Click to collapse
That's what my device manager showed when I bricked. Hope you get the original hboot
Sent from my EVO using xda app-developers app
corcgaigh said:
That's what my device manager showed when I bricked. Hope you get the original hboot
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Yeah, I hope so too. Just trying to think of a good story. Thinking of telling them it happened when I took the ota.
sofla2 said:
Yeah, I hope so too. Just trying to think of a good story. Thinking of telling them it happened when I took the ota.
Click to expand...
Click to collapse
since they cant power on the phone just tell them you were putting music on your sd card and the screen just went black during the process
Did you possibly think of trying the unbricker tool in original development that was made for this type of brick?
Sent from the euphoric state of my mind
I told Thom I took the OTA and phone never worked again.
The unbricker didnt work for me
Sent from my EVO using xda app-developers app
corcgaigh said:
I told Thom I took the OTA and phone never worked again.
The unbricker doesn't work
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Its had various results bro personally id have tried it but thats because i refuse to risk s off but thats me anyways glad u got a new one what hboot?
Sent from the euphoric state of my mind
---------- Post added at 09:54 AM ---------- Previous post was at 09:45 AM ----------
Just read soff and unbricker threads best bet is to read them andbfollow advice everyone in it that followed directions fixed phone soo yo each his own
Sent from the euphoric state of my mind
---------- Post added at 09:58 AM ---------- Previous post was at 09:54 AM ----------
http://forum.xda-developers.com/showthread.php?t=1737123
http://forum.xda-developers.com/showthread.php?t=1738481
First one is s-off thread second is the un bricker
Sent from the euphoric state of my mind
An unfortunate problem with the very first batch was an issue where the phone would suddenly go onto a reboot and never come back on, it wasn't very common but enough of a problem for HTC to revise the hardware before selling any more of them. If you had an original it might explain why it suddenly happened, it happened in stock and custom. Nothing you could you could of done if it was an early model
wileout said:
Its had various results bro personally id have tried it but thats because i refuse to risk s off but thats me anyways glad u got a new one what hboot?
QUOTE]
I was @ work when I posted that response. What I wanted to add was the unbricker didn't work for me, mainly because I bricked my device downgrading firmware and the unbricker seems to be for specific brick related to lazypanda. AFAIK the unbricker will work if you bricked using lazypanda , as for phones bricked another way I don't think so.
Also my replacement came with 1.15 hboot . The sprint tech let me power up all the LTE's he had to check the boot loaders. No luck
Remember when we were on preorder someone posted an article about this phone being unbrickable. I haven't a lot of experience with android devices but it seems there are a considerable amount of bricks. Does anybody think this phone is bricking more or less than previous devices.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
om4 said:
An unfortunate problem with the very first batch was an issue where the phone would suddenly go onto a reboot and never come back on, it wasn't very common but enough of a problem for HTC to revise the hardware before selling any more of them. If you had an original it might explain why it suddenly happened, it happened in stock and custom. Nothing you could you could of done if it was an early model
Click to expand...
Click to collapse
Where did you get that information? As far as i know all models have been hardware revision hw03.
From what I can tell the hardware id hasn't changed and I got the info from a sprint tech who received over 25 phones in a month with that exact issue and from people who can't figure out their voicemail much less unlock and root
Also plenty of phones with screen discoloration and a few with faulty proximity sensors
bog3nator said:
since they cant power on the phone just tell them you were putting music on your sd card and the screen just went black during the process
Click to expand...
Click to collapse
Actually, that is exactly what happened. I was transferring an mp3 to my sd card and the computer made the disconnect sound and my screen went black.
wileout said:
Did you possibly think of trying the unbricker tool in original development that was made for this type of brick?
Sent from the euphoric state of my mind
Click to expand...
Click to collapse
No I didn't. I thought the phone had to at least power up to do anything. It won't power on period. The computer doesn't recognize it when it's connected. Sprint couldn't even do anything with it.
Related
This time I have really f***ed up guys. I really think this time I have actually bricked my Thunderbolt. I was on Bamf Remix 1.63 I believe and everything was running great. I was obviously rooted also. I was bored and decided to flash Protekks Battery Sipper Kernel. Right after I flashed it, the phone would not boot. I pulled the battery and booted up again and it got stuck in a boot loop. So after a few tries I finally got it to boot into the bootloader. I got into recovery and tried to flash a backup and it rebooted in the middle of restoring it. I tried that a few more times. I then let the battery die. Then I charged it up a lot and tried to power it on and got nothing. The screen will not even turn on. When plugged into my computer it sometimes vibrates and my computer detects it and then my computer makes the sound like it was disconnected. I think it is still stuck in the boot loop with the screen off though. BTW the charging light does light up when plugged in. I tried the stock and extended battery to make sure it was not a battery problem. I finally called up Verizon and after I told them it would not turn on he said he is shipping me a free replacement. I told them that after a OTA update the phone would not boot. He warned me that if there is any evidence that the phone was rooted or hacked, I would be charged the retail price for the phone. That is really the only thing I am scared of. Any help would be greatly appreciated!!! Sorry for the long post, I wanted to get in all the details that I could.
Thanks
Adam
Try putting it in download mode and flash back to gongerbread using odin
Sent from my GT-I9000 using XDA Premium App
srkoza said:
Try putting it in download mode and flash back to gongerbread using odin
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Wtf? This isn't Samsung. OP do you bootloop in bootloader? I recommend you go to the irc and give them any info you can.. you will probably end up flashing a stock ruu through the bootloader but first go to irc.
Sent from my ThunderBolt using XDA Premium App
Thanks for the quick reply! How would I get into download mode. And I was on froyo before.. Shouldn't I download a froyo based rom?
Yeah I did not think we have Odin for HTC phones, and I already have the stock zip file on my MicroSD card but my screen will not turn on at all. I can not get into anything. Any advice?
Talk to jcase. Hopefully you have some adb knowledge.
Sent from my Thunderbolt using XDA Premium App
itsdubai said:
Yeah I did not think we have Odin for HTC phones, and I already have the stock zip file on my MicroSD card but my screen will not turn on at all. I can not get into anything. Any advice?
Click to expand...
Click to collapse
Go to irc.. someone with actual Dev experience can help you there try #thunderbolt
Sent from my ThunderBolt using XDA Premium App
OK thanks for the replies. Do you think the Verizon warranty center people will actually go to the trouble of getting it to work and then charge me full retail for a new one if they see it is rooted. I already have the stock zip on the SD card so when it does boot up, it will return everything to stock. I have read online that some people have been charged retail because there phones have been rooted but most of them have gotten away with with it..
itsdubai said:
OK thanks for the replies. Do you think the Verizon warranty center people will actually go to the trouble of getting it to work and then charge me full retail for a new one if they see it is rooted. I already have the stock zip on the SD card so when it does boot up, it will return everything to stock. I have read online that some people have been charged retail because there phones have been rooted but most of them have gotten away with with it..
Click to expand...
Click to collapse
I think you're almost certainly fine. It's a lot of work and time for big red over one phone. Plus, your etf is less expensive than a replacement device
Sent from my Thunderbolt using XDA Premium App
thanks for the response man. etf= early termination fee? I might not have said in my original post but they are sending me a free replacement device. The rep on the phone specifically said that if they find my phone to be rooted or hacked, that I will be charged around 629$ for the refurb replacement. I really cannot afford that (
Call back and tell em you accidentally dropped it out of moving vehicle and that it was run over 5 times...and that it was raining outside. Then pay your deductible.
ddgarcia05 said:
Call back and tell em you accidentally dropped it out of moving vehicle and that it was run over 5 times...and that it was raining outside. Then pay your deductible.
Click to expand...
Click to collapse
I decided that if I ever bricked, that I'd post on here asking what horrible things I should do previous to sending it in to get a replacement. Then post pics. XD
Sent from my Thunderbolt using XDA Premium App
Please check out this thread when you get a moment, might help the community and we would greatly appreciate it.
http://forum.xda-developers.com/showthread.php?t=1130407
Sent from my ADR6400L using XDA App
I got out of a bootloop on my friend's Insipre 4G (which is very similar to the TB) by mounting the microSD on my computer, and then putting a stock ROM on it. I had to rename the stock ROM PG98IMG (PG05IMG on Thunderbolt), and flash it through the bootloader, but it did work.
Thanks for the post man but the Thunderbolt does not show any signs of life at all besides the flashing orange LED at the top blinking and the computer detecting it on and off every 5 minutes. The stock zip is already on the SD card so when it finally boots up it will flash and hopefully Verizon won't charge me out the @ss for a replacement.
powered on! for a second...
UPDATE: I just had it hooked up to my laptop and it booted on the the white HTC screen and I almost had a heart attaack :O but then it powered off and wont come back on. FML
itsdubai said:
UPDATE: I just had it hooked up to my laptop and it booted on the the white HTC screen and I almost had a heart attaack :O but then it powered off and wont come back on. FML
Click to expand...
Click to collapse
how long have you had your phone and what hardware revision was it? did you try to run the RUU yet?
i think some people just got a batch of faulty phones because this doesn't seem to affect many.
I highly doubt verizon is going to receive your broken phone and boot it up and it will magically work. The only way it will auto-update is if they boot it into HBOOT. If they somehow just power it on it won't automatically apply anything. Keep that in mind. But I really wouldn't worry too much about it. If they charge you call them and tell them wtf I wasn't rooted. I don't even know what that means lol.
I have had the phone since the very first days it was released. Another slight annoying thing I have had happening prior is the glue on the screen has not been holding it down very well and and I can easily get a nail under it. And it wont let me do anything. I have a Droid X as a backup for now but I miss my beast
itsdubai said:
I have had the phone since the very first days it was released. Another slight annoying thing I have had happening prior is the glue on the screen has not been holding it down very well and and I can easily get a nail under it. And it wont let me do anything. I have a Droid X as a backup for now but I miss my beast
Click to expand...
Click to collapse
that's what im starting to think as htc has since released a revision 2 thunderbolt. i know as i just bought mine a few weeks ago. im wondering if the faulty phones were version 1 phones and have since been fixed. i also do not experience the high battery drain most of you guys do either.
I've seen a section on how to use the jig device but I don't think its going to work. Heres the thing, my phone is completely dead, no "Vibrant" screen, no download in anyway possible, no charging screen. Is there hope? Please help me :'(
This happened to me once, I could not get it to respond in anyway what so ever.... after being pissed and leaving it alone for about 20 minutes I came back and tried this...
1. Open your phone and take our your sim card, battery and external sd if you have one
2. Plug in your usb cord
3. Hold volume up and down, DO NOT HOLD POWER only volume buttons
4. Place battery back in phone and watch for the screen to respond
5. Release Volume up and down buttons
This method got me in to download mode even though I tried it like 100 times, it was only until after I let me phone sit for a little bit did it respond. Even if you have already tried this.... try it again. I went thru the same thing.
Solissfiend said:
This happened to me once, I could not get it to respond in anyway what so ever.... after being pissed and leaving it alone for about 20 minutes I came back and tried this...
1. Open your phone and take our your sim card, battery and external sd if you have one
2. Plug in your usb cord
3. Hold volume up and down, DO NOT HOLD POWER only volume buttons
4. Place battery back in phone and watch for the screen to respond
5. Release Volume up and down buttons
This method got me in to download mode even though I tried it like 100 times, it was only until after I let me phone sit for a little bit did it respond. Even if you have already tried this.... try it again. I went thru the same thing.
Click to expand...
Click to collapse
I've tried that but I'll let the phone rest for awhile. It happened when I was updating to 2.2 from 2.1 using Kies, I wasn't rooted or anything and I had just formatted the phone prior to that.
Burner2K0 said:
I've tried that but I'll let the phone rest for awhile. It happened when I was updating to 2.2 from 2.1 using Kies, I wasn't rooted or anything and I had just formatted the phone prior to that.
Click to expand...
Click to collapse
Same thing happened to me. Did everything as written above. Nothing seemed to work. Then....I put the battery in, left it overnight to charge. Tried it all over again and... IT WORKED!!!!
Sent from my SGH-T959 using xda premium
Nthe jig woulda worked for all of you
Sent from a cell tower to the XDA server to you.
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
toryheal said:
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
Click to expand...
Click to collapse
Isn't this posted in the right section? I mean,it does regard flashing and using Odin...
toryheal said:
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
Click to expand...
Click to collapse
And no, holding vol-up and plugging in usb does nothing.
Burner2K0 said:
Isn't this posted in the right section? I mean,it does regard flashing and using Odin...
Click to expand...
Click to collapse
This is a question trying to be answered (so Q&A is proper place) this is a section for devs to post and support their work. this wasn't to flame rather to let one know
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
Burner2K0 said:
And no, holding vol-up and plugging in usb does nothing.
Click to expand...
Click to collapse
Well then i suggest trying the one where you pull out the battery and try it that way or get down and dirty and make a jig or purchase one from the link i sent you.
toryheal said:
This is a question trying to be answered (so Q&A is proper place) this is a section for devs to post and support their work. this wasn't to flame rather to let one know
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
Well then i suggest trying the one where you pull out the battery and try it that way or get down and dirty and make a jig or purchase one from the link i sent you.
Click to expand...
Click to collapse
None of the steps work. My best bet is to buy a jig, but if phone is fully bricked, will that even work at all?
Burner2K0 said:
None of the steps work. My best bet is to buy a jig, but if phone is fully bricked, will that even work at all?
Click to expand...
Click to collapse
brother it is a game of chance either you take a ten dollar lose or you take a 130 dollar lose choice is yours but the have been a many of times where the jig has saved my ass...
toryheal said:
brother it is a game of chance either you take a ten dollar lose or you take a 130 dollar lose choice is yours but the have been a many of times where the jig has saved my ass...
Click to expand...
Click to collapse
Lets just hope it works, first have to put money in my paypal account. Kind of ironic how I've flashing ROMs here and there for a good while and the day I decided to go from stock 2.1 to 2.2 using Kies, it bricks >_>
Burner2K0 said:
Lets just hope it works, first have to put money in my paypal account. Kind of ironic how I've flashing ROMs here and there for a good while and the day I decided to go from stock 2.1 to 2.2 using Kies, it bricks >_>
Click to expand...
Click to collapse
Yeah i am guessing kies may be the issue. I would suggest giving it a try and if that doesnt work mobiletech jtags now
You can contact connexion2005 he is the best.
sadly.. for every 1 post I read about someone bricking a phone while flashing custom ROM, I read 4 or 5 of people bricking w/Kies..
did you ever have any 2.3.x roms on your phone? bootloaders?
"Kies ate my phone" is still an excellent way to get a new phone regardless of the current warranty.
G1toVibrant said:
sadly.. for every 1 post I read about someone bricking a phone while flashing custom ROM, I read 4 or 5 of people bricking w/Kies..
did you ever have any 2.3.x roms on your phone? bootloaders?
Click to expand...
Click to collapse
Yes I have, I had GB bootloaders on the phone but never switched them back to Froyos BL even when I flashed 2.2 ROMS, could that have been the problem?
Burner2K0 said:
Yes I have, I had GB bootloaders on the phone but never switched them back to Froyos BL even when I flashed 2.2 ROMS, could that have been the problem?
Click to expand...
Click to collapse
I know that you said you tried odin.... have you tried the One Click unbrick by Adam O and company? Sorry... that is heimdall to most... you can set it to load boot loaders for you, maybe this can help?
Hard Brick with Kies
Just wanted to say i did the same thing when i got my vibrant, i had busy box which i think was the reason kies failed on me.... but i called Samsung and they didn't even think twice about claiming warranty. They re flashed 2.2, and i bough the phone used of eBay, give them a shot.
cmzeunges said:
I know that you said you tried odin.... have you tried the One Click unbrick by Adam O and company? Sorry... that is heimdall to most... you can set it to load boot loaders for you, maybe this can help?
Click to expand...
Click to collapse
Judging by the thread, I doubt its going to work. It needs to atleast boot, which is what my phone isn't doing. Basically it acts as if there is no battery in, doesnt boot, no download mode, no charging screen. Computer wont pick it up either.
I'm trying to brick my device so i can downgrade to 1.40. Everything is fine up until the point where i have to pull the battery out and run off AC power without battery. When i pull out the battery the phone stays on like it is supposed to, but when i press volume + button to start update the phone immediately turns off.
I relocked my device and am running this stock rom. If anyone can offer some advice it would be greatly appreciated
Thank you
Are you using the actual HTC charger that came with the phone? I've read here on XDA that the stock HTC charger puts out a little more power than normal chargers. Also, you can't use USB via your PC.
thefsfempire said:
Are you using the actual HTC charger that came with the phone? I've read here on XDA that the stock HTC charger puts out a little more power than normal chargers. Also, you can't use USB via your PC.
Click to expand...
Click to collapse
Yep, using the one that came with the phone and i'm plugged into the wall. I even tried a couple different outlets. Do i need to have a certain rom installed?
jeffhbo said:
Yep, using the one that came with the phone and i'm plugged into the wall. I even tried a couple different outlets. Do i need to have a certain rom installed?
Click to expand...
Click to collapse
That shouldn't matter since we're dealing with just the bootloader. I'm not sure which guide you're using (if there's even more than one now) but here is the link I followed: http://forum.xda-developers.com/showthread.php?t=1547695
Make sure you boot recovery, remove back cover, plug in phone then pull battery when it says.
Yesss this sh*t is impossible.! I actually got pissed off cuz I COULDNT brick the damn phone lol
Sent from my PG86100 using XDA
ognimnella said:
Yesss this sh*t is impossible.! I actually got pissed off cuz I COULDNT brick the damn phone lol
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
I know right! Never thought I'd be mad cause i couldn't brick my phone. Next time someone says they're scared about rooting cause they dont wanna break their phone, I'll tell them they couldn't do it if they tried.
I think I'm going to go back to HTC unlock. The only reason I decided to downgrade my phone in the first place was because i wanted to flash Newtoroot's rls3 and was not able to get it running without losing service. At this point I think I can get that rom to work on 1.50 before i can get this SOB to brick, much less get through the rest of this damn process. If not, I'll just go back to rls1, cause i had that version running perfectly (bugs listed in OP excluded).
Good luck to anyone who's trying to do this...may you have better luck than I did lol.
Sincerely,
J
thefsfempire said:
That shouldn't matter since we're dealing with just the bootloader. I'm not sure which guide you're using (if there's even more than one now) but here is the link I followed: http://forum.xda-developers.com/showthread.php?t=1547695
Make sure you boot recovery, remove back cover, plug in phone then pull battery when it says.
Click to expand...
Click to collapse
I had this problem where my phone would turn off as well..I was using a stock htc charger that came with the E3d. What I did was hold my charger steady because if I moved it too much the charge would leave. No I didnt have a shortage in my charger but it just read like that in the laptop. Probably because being plugged into the laptop or cpu it doesnt feed off enough voltage. Hope this works for you.
So last night, when going to charge my phone, I notice that turning the screen on wasn't bringing me to my lockscreen. Instead it was a black screen with a line in the middle. It looked like the screen off animation got stuck on the screen. So I rebooted it and it was fine.
Today, I wake up and it won't respond at all. Holding the power button does nothing, it doesn't look like it's charging either. I know that I have it set up to run lagfix at night, could that have been the cause of this? Is there any way to come back from a brick?
shmallow said:
So last night, when going to charge my phone, I notice that turning the screen on wasn't bringing me to my lockscreen. Instead it was a black screen with a line in the middle. It looked like the screen off animation got stuck on the screen. So I rebooted it and it was fine.
Today, I wake up and it won't respond at all. Holding the power button does nothing, it doesn't look like it's charging either. I know that I have it set up to run lagfix at night, could that have been the cause of this? Is there any way to come back from a brick?
Click to expand...
Click to collapse
Yup, there is a way to fix this. Visit your local Sprint store and have it replaced. Hope you have insurance, if not its $50. Gods peed to you.
MeestaAytch said:
Yup, there is a way to fix this. Visit your local Sprint store and have it replaced. Hope you have insurance, if not its $50. Gods peed to you.
Click to expand...
Click to collapse
No insurance. :crying:
After plugging the device into the computer, it says QHSUSB_DLOAD. So I guess that confirms it was from lagfix.
shmallow said:
No insurance. :crying:
After plugging the device into the computer, it says QHSUSB_DLOAD. So I guess that confirms it was from lagfix.
Click to expand...
Click to collapse
Well you're going to have to pay the $50 then. And yea its from the "lagfix". That "lagfix" is really just TRIM. It's disabled off CM10.2 currently for this exact reason. It's been having a grand ole time causing a brickfest.
MeestaAytch said:
Well you're going to have to pay the $50 then. And yea its from the "lagfix". That "lagfix" is really just TRIM. It's disabled off CM10.2 currently for this exact reason. It's been having a grand ole time causing a brickfest.
Click to expand...
Click to collapse
I thought even if you had insurance you had to pay to get a replacement? Isn't only the in-store repair free?
shmallow said:
I thought even if you had insurance you had to pay to get a replacement? Isn't only the in-store repair free?
Click to expand...
Click to collapse
You only pay the deductible if the phone is lost or stolen. For hardware failure, with TEP, there should be no charge for a replacement device.
Jtag might be another alternative, as well. Shoot XDA member Zarboz a PM for more info.
Sent from my EVO using XDA Premium 4 mobile app
PM'd Zarboz. But is there any way for me to unbrick it myself? I'd really like to leave going to sprint or mailing my phone away as a last resort. I've found a few unbricking tutorials, but they say that they're only for bricks that occur when going S-Off. Would it be crazy to try one of those anyway?
shmallow said:
PM'd Zarboz. But is there any way for me to unbrick it myself? I'd really like to leave going to sprint or mailing my phone away as a last resort. I've found a few unbricking tutorials, but they say that they're only for bricks that occur when going S-Off. Would it be crazy to try one of those anyway?
Click to expand...
Click to collapse
It won't work. You're not the first person to have this type of brick. It occurs as a result of faulty hardware, which can only be replaced, or flashed directly with JTAG (and even then, you'd still have the same hardware, and be prone to the same issue again).
I guess you missed the part in the Lagfree app OP that mentions the "brick bug."
Captain_Throwback said:
It won't work. You're not the first person to have this type of brick. It occurs as a result of faulty hardware, which can only be replaced, or flashed directly with JTAG (and even then, you'd still have the same hardware, and be prone to the same issue again).
I guess you missed the part in the Lagfree app OP that mentions the "brick bug."
Click to expand...
Click to collapse
Well, no, I saw it. I thought I would be fine because I only saw the affected devices as samsung ones. Thanks for the input though. I'll just replace it or wait until I can upgrade.
shmallow said:
Well, no, I saw it. I thought I would be fine because I only saw the affected devices as samsung ones. Thanks for the input though. I'll just replace it or wait until I can upgrade.
Click to expand...
Click to collapse
Might help if you go to the thread and mention that this device appears to be affected as well, otherwise more may suffer your fate.
Bricked??
Yesterday I restored a backup that I've been running for mounths, restored fine and no issues. Today I got a text went to unlock the device, had snow like an old tv with no signal. I pressed home and got the lock screen but there was major screen tear and the device was very slow to respond. I managed to get to twrp recovery and there was also screen tear/snow and the middle 2/4 was not there and non responsive, so couldn't wipe, fix perms or restore any thing. Tried that a few times, now the only response I get is I hold the power button for 10-15 seconds, capasitive buttons flash, let go of button, half a second later there is a quick vibration and black screen. I can't get in to the bootloader or recovery. Am I hosed?? tia Also when I charge it the light doesn't go on
I too had this issue, but my phone went white then turned off and never turned
Back on. It was a hardware failure. They replaced mine for free.
Sent from my EVO using xda premium
I plugged the device after a while and the orange light comes on like it is charging?? Is that a good sign?? I try adb commands but it came up device not found. Any suggestions?
robbo10 said:
I plugged the device after a while and the orange light comes on like it is charging?? Is that a good sign?? I try adb commands but it came up device not found. Any suggestions?
Click to expand...
Click to collapse
Let it charge for a good long while, then try to power it up.
Sent from my EVO using XDA Premium 4 mobile app
FinZ28 said:
Let it charge for a good long while, then try to power it up.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OK i'll try that, the phone was at 90% when all this happened idk??
mammothjojo88 said:
I too had this issue, but my phone went white then turned off and never turned
Back on. It was a hardware failure. They replaced mine for free.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
If I still had insurance I would do this, but I'm not sure a new Evolte is worth $50 to me, especially with my upgrade around the corner. I'll just have to say farewell to this phone. It was a good run.
FinZ28 said:
Let it charge for a good long while, then try to power it up.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Let charge for a while it booted and got stuck on the splash screen but the coloring was off. I plugged it in to the computer ran "adb devices" and it found it said recovery and a long number. I tried "adb reboot bootloader" black screen and that was it.
Sent from my PC36100 using xda app-developers app
robbo10 said:
Let charge for a while it booted and got stuck on the splash screen but the coloring was off. I plugged it in to the computer ran "adb devices" and it found it said recovery and a long number. I tried "adb reboot bootloader" black screen and that was it.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Looks like an issue with the screen. If you have TEP I'd take it to Sprint and let them look at it. Shouldn't cost you anything to get it replaced.
Sent from my EVO using XDA Premium 4 mobile app
Wow, you guys were right, you do get a free replacement.
At first, I was set on just living with my mother's old SG4G, but I couldn't stand how outdated it was. The screen looked meh, and I couldn't even install Chrome on it. So I was ready to pay the $50 to replace it, went to sprint with my evolte, and the guy there said he could only service active phones. So he changed my active phone back to my evolte, and added insurance to it. So I walked in with a broken phone without insurance, and left with a new phone for free. I'd say that's a lucky day.
Thanks for your advice guys, you guys just got me a new phone for free.
Ok so last night I transferred some files with otg cable. Unmounted and then went to put it on charger and it does not recognize the charger. It did charge after I powered it down. But when the phone is on it doesn't recognize anything plugged into the usb port. Anyone have any suggestions? And if not how do I run a ruu or something to get back to stock for warranty without a connection to pc?
Sent from my HTC One using Tapatalk 4
Quick update. I am on 3.09.401.1 firmware and a 2.24.401.8 based rom. Not sure if that has anything to do with it but it will charge in recovery mode but not booted up. So seems like a firmware/software issue. Is there any way to flash firmware without using usb to pc? Because it won't recognize the usb at all.
Sent from my HTC One using Tapatalk 4
Clselfridge said:
Quick update. I am on 3.09.401.1 firmware and a 2.24.401.8 based rom. Not sure if that has anything to do with it but it will charge in recovery mode but not booted up. So seems like a firmware/software issue. Is there any way to flash firmware without using usb to pc? Because it won't recognize the usb at all.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Weird problem. Not sure if it will work but you can try "flashify" from the play store to flash firmware, etc without usb. Keep us posted on your results.
Also see if you can access it through bootloader. You might be able to RUU. Alternatively, factory reset and install ROM in recovery. Or try side adb in recovery..
Clselfridge said:
Ok so last night I transferred some files with otg cable. Unmounted and then went to put it on charger and it does not recognize the charger. It did charge after I powered it down. But when the phone is on it doesn't recognize anything plugged into the usb port. Anyone have any suggestions? And if not how do I run a ruu or something to get back to stock for warranty without a connection to pc?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
I'm currently using the same firmware ROM base combination as you with no issues. Are you using the charger that came with your phone, have you replaced the usb cable to make sure it isn't faulty?
Sent from my HTC One using xda app-developers app
suntzu said:
Weird problem. Not sure if it will work but you can try "flashify" from the play store to flash firmware, etc without usb. Keep us posted on your results.
Also see if you can access it through bootloader. You might be able to RUU. Alternatively, factory reset and install ROM in recovery. Or try side adb in recovery..
Click to expand...
Click to collapse
I am going to look into flashify. That sounds interesting. I have tried getting the thing to pick up the usb in hboot. But no luck so far.
igglesphilsfan said:
I'm currently using the same firmware ROM base combination as you with no issues. Are you using the charger that came with your phone, have you replaced the usb cable to make sure it isn't faulty?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I have tried three different HTC branded charger/cable combinations. With no luck while booted up. I charged to 100% while shut off.
I have been running this combo for a week or something. Ever since the firmware hit the forums. And had no issues until two nights ago when this first started giving me grief... so I don't know what has caused it.
I also posted this over in the international forums and there's a guy over there with the same issue.
Sent from my HTC One using Tapatalk 4
well i am downloading a stock backup and i have a stock recovery not sure how to get them both to work... because i have to flash the stock rom with twrp and then how do i get the stock recovery flashed with a stock rom.... i will figure it out. anyway my plan is to try to take an ota and have that change the firmware and then i will know if i have a hardware issue or a software issue.
Lol. Now I'm not sure what to do. I reverted back to stock rom and recovery and then realized the touch drivers I have aren't compatible.... But I am booted up and plugged into the pc and it is charging but not coming up on the pc as a device. I don't know if debug mode is on because I am stuck at the first setup screen... Ahh I can't seem to catch a break here...
Sent from Tapatalk
Clselfridge said:
Lol. Now I'm not sure what to do. I reverted back to stock rom and recovery and then realized the touch drivers I have aren't compatible.... But I am booted up and plugged into the pc and it is charging but not coming up on the pc as a device. I don't know if debug mode is on because I am stuck at the first setup screen... Ahh I can't seem to catch a break here...
Sent from Tapatalk
Click to expand...
Click to collapse
Ruu back to stock AT&T and start over.
scrosler said:
Ruu back to stock AT&T and start over.
Click to expand...
Click to collapse
That's what I am trying to do... However I can't get the pc or the phone to recognize the connection. I have been messing with this thing and getting nowhere for so long I feel like I'm just banging my head agains a wall...
Sent from Tapatalk
Clselfridge said:
That's what I am trying to do... However I can't get the pc or the phone to recognize the connection. I have been messing with this thing and getting nowhere for so long I feel like I'm just banging my head agains a wall...
Sent from Tapatalk
Click to expand...
Click to collapse
...have you tried booting into safe mode and then see if it is recognized? Just a shot in the dark. :fingers-crossed:
igglesphilsfan said:
...have you tried booting into safe mode and then see if it is recognized? Just a shot in the dark. :fingers-crossed:
Click to expand...
Click to collapse
How do I get into safe mode?
Sent from Tapatalk
Press the power button until the power options open. Tap and hold POWER OFF on the screen and the phone should ask if you'd like to boot into safe mode but if your touch panel is not working for you this is not going to work.
Sent from my HTC One using xda app-developers app
igglesphilsfan said:
Press the power button until the power options open. Tap and hold POWER OFF on the screen and the phone should ask if you'd like to boot into safe mode but if your touch panel is not working for you this is not going to work.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Correct. I have totally screwed myself I think. I think I basically at this current time have a fairly lightweight brick that lights up. I have no touch capabilities at all and nothing recognized when plugged into PC. I have tried plugging into a windows 8 and also a Ubuntu machine with no dice in fast boot or adb....
Sent from Tapatalk
I dont think it is prob with some ROM. I used HTC One with stock rom (official stock by HTC) and after three months my phone stopped charging and also stop USB connection. I googled it and it was universal prob and also HTC knows about that.
See this http://forum.xda-developers.com/showthread.php?t=2417377
Phone acted very strange. Details are in above link. And also there are 2 or 3 threads more like this.
sandeep.mjs said:
I dont think it is prob with some ROM. I used HTC One with stock rom (official stock by HTC) and after three months my phone stopped charging and also stop USB connection. I googled it and it was universal prob and also HTC knows about that.
See this http://forum.xda-developers.com/showthread.php?t=2417377
Phone acted very strange. Details are in above link. And also there are 2 or 3 threads more like this.
Click to expand...
Click to collapse
Did you end up getting it resolved and if so how?
I don't think AT&T will look kindly on me for having it unlocked and s-off and for having a rom/firmware mismatch...
Sent from Tapatalk
Clselfridge said:
Did you end up getting it resolved and if so how?
I don't think AT&T will look kindly on me for having it unlocked and s-off and for having a rom/firmware mismatch...
Sent from Tapatalk
Click to expand...
Click to collapse
Unless the OTA adapter screwed up the USB connector pins for data but not power, then you should be able to recover. However like stated there has been a few reports of failed USB connectors.
Does there seem like there is any damage to the usb pins in the connector on the phone?
Did you make sure to have the HTC device drivers installed on your PC before trying ADB. Do you have a Windows 7 PC to try?
crushalot said:
Unless the OTA adapter screwed up the USB connector pins for data but not power, then you should be able to recover. However like stated there has been a few reports of failed USB connectors.
Does there seem like there is any damage to the usb pins in the connector on the phone?
Did you make sure to have the HTC device drivers installed on your PC before trying ADB. Do you have a Windows 7 PC to try?
Click to expand...
Click to collapse
So far I have tried on win8 winxp and Ubuntu.on the windows pcs the drivers were definitely installed. No dice on any of them. I am thinking the connector must be messed up. I can't see anything obvious looking at it but the fact that on three pcs one of them running Linux didn't find the phone but will charge it is pretty definitive. I don't have the money to pay for repairs due to having "tampered" with the phone(even though it doesn't say that) it is an AT&T phone with s-off and unlocked and a 1.55 hboot and has a inverted splash screen. Pretty obvious...
Sent from Tapatalk
Clselfridge said:
So far I have tried on win8 winxp and Ubuntu.on the windows pcs the drivers were definitely installed. No dice on any of them. I am thinking the connector must be messed up. I can't see anything obvious looking at it but the fact that on three pcs one of them running Linux didn't find the phone but will charge it is pretty definitive. I don't have the money to pay for repairs due to having "tampered" with the phone(even though it doesn't say that) it is an AT&T phone with s-off and unlocked and a 1.55 hboot and has a inverted splash screen. Pretty obvious...
Sent from Tapatalk
Click to expand...
Click to collapse
If you boot the phone into the bootloader without the cable attached it should come up and say fastboot. When you attach the USB cable does the display on the phone change to fastboot USB or stay only fastboot?
crushalot said:
If you boot the phone into the bootloader without the cable attached it should come up and say fastboot. When you attach the USB cable does the display on the phone change to fastboot USB or stay only fastboot?
Click to expand...
Click to collapse
Only fastboot. Never changes.
Sent from Tapatalk
Clselfridge said:
Only fastboot. Never changes.
Sent from Tapatalk
Click to expand...
Click to collapse
Yep, then it seems the pinouts on the USB connector have been damaged. Bummer.
On the plus side consider this: AT&T will probably still give you device exchange without charging you a fee. First, they mostly don't care about users modding their phones. Secondly there are so many exchange requests coming into them for the One, that all the defective units will just be sent back to HTC directly by AT&T and at that point HTC is not going to bother to go back to AT&T and say listen this list of devices were modified. If they did, that would create a backlog on work for AT&T to match the records to owners and then contacting them and trying to prove that the user did this so far removed from the exchange that it doesn't make business sense to them.
I have seen AT&T users report that they have sent in devices that were extremely modified and obvious, but AT&T proceeded with the exchange anyway because they would rather keep you as a happy customer than spending time trying to prove what you did was the only cause of the failure. Users have even sent back total bricks that they created by doing something stupid and AT&T still replaced the device without question.
When you modded the phone, that basically ended AT&T's obligation to help you with any service/software related issues, but the modding did not void the hardware warranty and it seems your device has a hardware issue that was unlikely caused by the software modifications.
The key in your case would be to do the defective device exchange via phone/mail and not via the walk in device service center.
If you don't want to do this because of the possible risk of flagging by them, then I may be willing to buy your bricked device if you are not going to do anything with it. PM if interested.