I currently use cm10 as my dd. Flashed back to Sense (meanrom) to do a ##3282# > data profile > restore in an attempt to fix some minor 3G issues. After restoring and rebooting, the hands free activation never started. Tried a manual profile and prl update with little luck. Currently, I have no 3G signal. I was able to get 3G back very temporarily after doing a ##72786# >menu > reset; however, it would only work in LTE/CDMA mode and would usually drop-off very quickly. Tried reverting back to AOSP and data was still gone. Has anyone experienced this? Is there something else that Sprint has to do on their end?
I had the same problem no 3g for a week then I went to a repair sprint center, the guy said it was the phone wish I had uprooted before going in. He did all the firmware update and nothing, knew it was the phone cauz i did the ##786# and was not doing anything because I had no data. Anyway sprint gave me a new one for 35$.which suck because came with the new hboot 1.15.
Sent from my EVO using xda premium
Here are a couple more observations. On a sense ROM, I can get 3G as long as I keep it on LTE/CDMA and not CDMA only. Once i switch it, it immediately disconnects. When I switch over to CM10 I get no 3G at all regardless if I am using LTE/CDMA/EvDo or CDMA/EvDo auto. Also, when I am connected to my airave I am unable to get any type of 3G regardless of the mode that I am on. Is there a setting within "data profile" that is preventing me from connecting to "cdma only"?
Tried two additional things with no success - 1. Switched to cdma only and tried updating profile. 2. ##72786# to reset data.
There shouldn't be an issue with cmx other then having to switch to CDMA/auto. Try switching to CDMA auto and immediately reboot the phone and let it just sit for about 5-10 minutes it sounds bad but its not these are nighties and it will be fixed soon enough
Is the active profile set on 1? I had the same problem, and I was able to get data back by doing a profile update over WiFi..
Sent from my EVO using xda premium
aimbdd said:
Is the active profile set on 1? I had the same problem, and I was able to get data back by doing a profile update over WiFi..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
you sir fixed my issue...thank you!!!! Hit a roadblock with a "vDM stopped unexpectedly" error which prevented me from updating profile. Flashed a nandroid, changed data profile to 1, updated profile over wifi and it worked. Can switch between cdma and lte without a problem. Flashed CMX again and 3G connected right away. Thanks again!
Related
For the last three days I have have little to no data connection. Phone calls and text messages work and i can connect over Wifi.
I called Verizon and they have had similar reports in Southern California, but not necessarily in my area. I have talked with other TBolt owners who have no problem.
So here's the technical side of things: I was running BAMF 1.6 when the problem started, so I flashed CM7 and the 2.5 radio but the problem persisted. I have the phone set to CDMA auto (PRL). [I don't have 4G in my area] Ping tests fail..
I don't really know what I am looking for, hopefully confirmation that this must be a problem from Verizon, and that I can expect this to correct itself.
Any insight would be appreciated.
UPDATE: I have replaced the MR2.5 radio with the MR2 as well as a different kernal to no avail.
I have reset all the APNs, and have selected every reasonable combination of network mode and data options. nothing.
Is this possible a hardware issue? Can a 3G antenna be broken but still be able send and receive phone calls and SMS ? (MMS seems to work as well)
damn first world problems...
try turning off the radio
dial *#*#4636#*#*
Select phone info
scroll down you will see a button that says Turn off radio
Hit that and wait for it to update and wait for your signal bar to get an X. Then turn it back on. I have had the same issue before and this always works for me.
I have tried turning the radio on and off multiple times. I have even tried turning data off and then turning the radio off and on.
but I thank you for the suggestion.
use his method not the lte off/on or a tool kit
Sent from my ADR6400L using XDA Premium App
I am in a heavy VZW 3G area and all day today I have only gotten 1X on my phone. A couple times I had 3G for a few seconds but then it would either go back to 1X or just show the signal bars with no notification of what network you are connected to (what the signal icon looks like when you are connected to wifi)
I did a full wipe and reinstall of my rom and even reinstalled the radio again in bootloader (the latest 7/8/11 OTA radio) and still only get 1X at best.........
I'm hoping its just the area here and not my phone...........???
Please use search.
Its probly fine. Can you go online and browse alright? If so, its fine. 1x is for voice, so its always going to be "on" persay...
Sent from my TBolt using my f***king thumbs...
check your radio toggle settings ie - where
you toggle 3g/4g radio on/off.
- check and see if your radio is set to:
"CDMA auto (PRL)"
i had the exact same issue and come to find
out I had mine set to "CDMA only"
Also make sure your battery door is completely on
wow so......last night and today
I'm experiencing the same problem now too!
I no longer see 3g at all. just the bars
i have:
- flashed to different backup
- pulled battery & sim
- checked battery installed correctly
- checked radio was on cdma prl
and still nothing
dial ##778# from your phone... Go to edit mode, go to "Modem" and change modem from whatever it is one to "RevA" and then reboot. That should fix the issue.
htcdesirezgeorge said:
dial ##778# from your phone... Go to edit mode, go to "Modem" and change modem from whatever it is one to "RevA" and then reboot. That should fix the issue.
Click to expand...
Click to collapse
yeah I tried that earlier and it did not fix my issue.
i ended up going in store and they changed my sim
card. Now I have my 3g connection back
for the meantime...
Has anyone experienced this error, or know why I'd be getting this error. I'm currently running a stock unlocked and rooted, and used the Deblur script. Almost every time I'm roaming I get this error, and have no data connection. I can make phone calls, but no data. Any suggestions would be greatly appreciated.
I thought about sbf back to complete stock to see if it keeps happening or not.
Just means an app tried using the web but you weren't connected. No need to restore
Sent from my MB855 using XDA
But I can't use data though. I was able to do this before, but now for some reason when I roam, It gives me the error. I tried updating profile and prl, which was successful when I was in a sprint area, but when I roam I get the Mobile IP error.
I get this same error, but my setup is alot different. Photon 4g flashed to pageplus (verizon) with voice and sms working but no data atm. Roco rom, unlocked. More info, there is 89 of these errors.
Sent from my MB855 using xda premium
I was also having this issue -- tried updating PRL and profile, and it seems to have fixed the issue, at least for now.
onree said:
I was also having this issue -- tried updating PRL and profile, and it seems to have fixed the issue, at least for now.
Click to expand...
Click to collapse
I did this also and no more errors come through, but still no verizon/ ppc data.
Just to ask the obvious, do you have data roaming enabled in the settings?
Sent from my MB855 using XDA
Yep, that's the first the thing I do when I flash a rom, is make sure that the data is working, so I check the roaming data.
Mobile IP Reg. Response Error
Go in to >Settings > Battery and Data >Data Delivery and make sure Background data and Data Enabled are checked.
Under Wireless and Networks select WiFi settings, press Menu and select advaced. Change WiFi sleep policy to NEVER.
Hope this helps and I know it is a bit Obvious, but that Background and Data Enabled located under Battery and Data seems a bit ridiculous to me.
I had this error also. All the settings you mention were checked and double checked and nothing solved the issue. Since I have flashed CNA I have not experienced it in the last 24 hours.
My MoPho's in the kitchen sink!!
I am new to root and ROMs so perhaps I overlooked a setting.
I just rooted my phone and flashed CM 10.2 a few days ago and I cannot get 4G anymore. I can only get 3G. I have tried a few fixes like dialing *#*#4636#*#* and adjusting the APN settings but nothing worked. I have the LTE button ON and I am wondering if I am still getting 4G because I have LTE on and it's just showing 3G. But I don't think that's the case.
Any help or tips would be greatly appreciated!
Sent from my SCH-I605 using xda app-developers app
xcharliemikex said:
I am new to root and ROMs so perhaps I overlooked a setting.
I just rooted my phone and flashed CM 10.2 a few days ago and I cannot get 4G anymore. I can only get 3G. I have tried a few fixes like dialing *#*#4636#*#* and adjusting the APN settings but nothing worked. I have the LTE button ON and I am wondering if I am still getting 4G because I have LTE on and it's just showing 3G. But I don't think that's the case.
Any help or tips would be greatly appreciated!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
reflash stock rom. make sure you have 4g. flash the vram3c radio then flash cm10.2 rom. you should have no problems with 4g after that.
I will try that. Thanks!
Sent from my SCH-I605 using xda app-developers app
I tried flashing the radio and CM again and sometimes 4G comes up for a few minutes and goes back to 1X. This happens where I have gotten 4G before. Maybe the radio isn't as strong?
Sent from my SCH-I605 using xda app-developers app
xcharliemikex said:
I tried flashing the radio and CM again and sometimes 4G comes up for a few minutes and goes back to 1X. This happens where I have gotten 4G before. Maybe the radio isn't as strong?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
My personal experience, living in a fringe signal area, is that AOSP roms just don't have as strong a signal as TW roms (it presumably has to do with how the RIL had to be hacked/reverse-engineered to work for AOSP). I would prefer running AOSP, but unfortunately in my experience on my S3 and Note2, where I am located on the fringe of full 4G coverage areas, I have the same issues as you: on TW, full, fast, 4G; on AOSP, very obviously slow 3G or 1X.
Edit to say I've only tried 4.2.2 ROMs, haven't tried the 4.3 ones yet, so if I'm handing out wrong/outdated info, I'd love to be corrected.
I am now running a stock 4.1.2 ROM and still cannot get 4G. I now for some reason can't even dial *#*#4636#*#*. When I try it just says "Welcome to Verizon Wireless, this call cannot be completed as dialed." Anyway to get that number to work so I can check my networks again?
xcharliemikex said:
I am now running a stock 4.1.2 ROM and still cannot get 4G. I now for some reason can't even dial *#*#4636#*#*. When I try it just says "Welcome to Verizon Wireless, this call cannot be completed as dialed." Anyway to get that number to work so I can check my networks again?
Click to expand...
Click to collapse
Try going into settings and factory reset phone now. If that doesnt work, reboot into stock recovery and factory reset from there and reboot. That seems to restore signal for those of us that got stuck in roaming mode from the Carbon thread. Might help your problem too
So I decided to re-flash CyanogenMod 10.1, adjusted the APN settings again, and I have 2 bars of 4G right now. Usually 4G will flash a couple times and change to 3G, but it is staying 4G, so hopefully it stays that way!
Well it stayed 4G for a bit until I turned WiFi on. The moment I turned it on, my 4G went to 3G. I turned WiFi off and I still have 3G. Anyone know what would cause this?
EDIT: My network type shows eHRPD with 3G, where as when I had 4G (before I turned my WiFi on) it showed LTE. If this helps any.
xcharliemikex said:
Well it stayed 4G for a bit until I turned WiFi on. The moment I turned it on, my 4G went to 3G. I turned WiFi off and I still have 3G. Anyone know what would cause this?
EDIT: My network type shows eHRPD with 3G, where as when I had 4G (before I turned my WiFi on) it showed LTE. If this helps any.
Click to expand...
Click to collapse
Where do you live, i know the mid Circle drive all the way over across platted to the airport are just dead zones. I lived on Verde drive and rarely had good signal, then when i moved up circle behind the bowling alley i never had a good signal. Just something about the antennae in that area. T-mo is a complete bust in that area. But i'm sure you probably all the way over on the Nevada side completely making what i said irrelevant.
dragonstalker said:
Where do you live, i know the mid Circle drive all the way over across platted to the airport are just dead zones. I lived on Verde drive and rarely had good signal, then when i moved up circle behind the bowling alley i never had a good signal. Just something about the antennae in that area. T-mo is a complete bust in that area. But i'm sure you probably all the way over on the Nevada side completely making what i said irrelevant.
Click to expand...
Click to collapse
I live right by Peterson AFB.
xcharliemikex said:
I live right by Peterson AFB.
Click to expand...
Click to collapse
Do a search on towers in your areas. If I remember correctly the closest tower to you in right by the interstate by the new (now not so new) MCD's in Security. That tower had alot of problems in the area past the Olympics complex all the way back to Peterson because of the radio towers for the Jets. I have been gone for almost 3 yrs so don't take what i say as truth tho. Just how it was when i was there.
dragonstalker said:
Do a search on towers in your areas. If I remember correctly the closest tower to you in right by the interstate by the new (now not so new) MCD's in Security. That tower had alot of problems in the area past the Olympics complex all the way back to Peterson because of the radio towers for the Jets. I have been gone for almost 3 yrs so don't take what i say as truth tho. Just how it was when i was there.
Click to expand...
Click to collapse
I will check that.
One LAST thing...after I edit my APN, my APN list is blank. I did a search but did not find anything.
xcharliemikex said:
I will check that.
One LAST thing...after I edit my APN, my APN list is blank. I did a search but did not find anything.
Click to expand...
Click to collapse
I've had that problem before. .I used a mod like this.
This mod is from DroidXcon, Try this and hopefully it will work. (make a backup of your buld.prop first)
Instructions:
1)Go to market install BuildProp Editor
2)Once installed find and open Build Prop Editor
3)Hit the menu button and select Edit
4)Scroll to the bottom of screen and add the following lines
Code:
ril.sales_code=LOL
ro.csc.sales_code=LOL
5)Hit the save button at the top right hand corner of the screen(looks like a disk)
6)Once this is done saving restart the phone
7)After restarting go to Settings>More Settings>Mobile Networks>Access Point Names>Menu Button>+ New APN
8)Add desired carriers APN info, when finished hit menu button and save
9)Power down and change to your desired SIM card if you hadn't already done so
10)Power back on and go to Settings>More Settings>Mobile Networks> Access Point Names (if done properly you should see the APN data you entered for your respective carrier).
11)Select the respective APN listing and then you should have working data
dragonstalker said:
I've had that problem before. .I used a mod like this.
This mod is from DroidXcon, Try this and hopefully it will work. (make a backup of your buld.prop first)
Instructions:
1)Go to market install BuildProp Editor
2)Once installed find and open Build Prop Editor
3)Hit the menu button and select Edit
4)Scroll to the bottom of screen and add the following lines
Code:
ril.sales_code=LOL
ro.csc.sales_code=LOL
5)Hit the save button at the top right hand corner of the screen(looks like a disk)
6)Once this is done saving restart the phone
7)After restarting go to Settings>More Settings>Mobile Networks>Access Point Names>Menu Button>+ New APN
8)Add desired carriers APN info, when finished hit menu button and save
9)Power down and change to your desired SIM card if you hadn't already done so
10)Power back on and go to Settings>More Settings>Mobile Networks> Access Point Names (if done properly you should see the APN data you entered for your respective carrier).
11)Select the respective APN listing and then you should have working data
Click to expand...
Click to collapse
I tried this but having the same problem, so I decided to save the APN each time I edited an item, and every time I would change the MNC and save, it would not be on my APN list, and it would be blank again.
Bump... also having this issue. Trying CM 10.2 for the first time since August. It had Bluetooth issues back then, so I've been running Bean's ROM until yesterday. Can't get 4G serivce in what is absolutely a saturated 4G area...
Was able to fix the issue by wiping the phone completely (including internal storage!), installing Bean's ROM, doing a factory reset, then coming back.
FWIW I always wipe internal storage when going back and forth between 4.1 and 4.2+ roms, seems to alleviate any SD card issues that can arise from the changes to filesystem in 4.2.
Hi I have been having an Odd issue with LTE and every time I switch from CDMA to CDMA +LTE/Evdo or similar to that, my phone constantly reboots when it tries to connect to LTE.
I have to airplane mode as soon as I can before it reboots again and then go back to CDMA only very quickly.
On Sense ROMs I get an error code saying it couldn't connect or so, been some time since last sense ROM.
I'm currently running SOKP and baseband says unknown in settings. Any and all help is greatly appreciated.
Also, I've been on NPL with latest radio since first release of new update, but the issue only appeared in the last few weeks.
Link420able said:
Hi I have been having an Odd issue with LTE and every time I switch from CDMA to CDMA +LTE/Evdo or similar to that, my phone constantly reboots when it tries to connect to LTE.
I have to airplane mode as soon as I can before it reboots again and then go back to CDMA only very quickly.
On Sense ROMs I get an error code saying it couldn't connect or so, been some time since last sense ROM.
I'm currently running SOKP and baseband says unknown in settings. Any and all help is greatly appreciated.
Also, I've been on NPL with latest radio since first release of new update, but the issue only appeared in the last few weeks.
Click to expand...
Click to collapse
I'd suggest flashing a sense ROM and giving the ##72786# reset a try. Or at the very least, flash sense and update your PRL and profile. Not sure why it's causing a reboot though, never heard of that before. Best to try the reset as you won't lose any data and it will update PRL and profile automatically. Flash sense, dial ##72786# from dialer and select reset from the menu.
Sent from my EVO using XDA Premium 4 mobile app
Evolution_Freak said:
I'd suggest flashing a sense ROM and giving the ##72786# reset a try. Or at the very least, flash sense and update your PRL and profile. Not sure why it's causing a reboot though, never heard of that before. Best to try the reset as you won't lose any data and it will update PRL and profile automatically. Flash sense, dial ##72786# from dialer and select reset from the menu.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. I'll try that and post the results
Link420able said:
Thanks. I'll try that and post the results
Click to expand...
Click to collapse
Well after flashing ViperRom and doing the code in dialer, reset managed to update prl and profile while was failing before. LTE connects now and works, I'm not sure how it got corrupted though