Just upgraded Common Sense 1.5 AOSP from 1.2 on my 3D, Awsome ROM guys!!! Although, since upgrade, no 4G and cant get tether to function. Anyone else have this issue. Also the cool splash screen from 1.2 is gone.
Keep it up guys and thank you. DR
drich66 said:
Just upgraded Common Sense 1.5 AOSP from 1.2 on my 3D, Awsome ROM guys!!! Although, since upgrade, no 4G and cant get tether to function. Anyone else have this issue. Also the cool splash screen from 1.2 is gone.
Keep it up guys and thank you. DR
Click to expand...
Click to collapse
There's a thread for the Common Sense ROM in the development forum and you might have better luck getting your issue addressed there.
ramjet73
Hey there. I would've preferred this posted in my thread, but no biggie, I stumbled across this and thought I'd lend a hand. I can't test 4G since I don't have it in my area. Could be a framework problem but I HIGHLY doubt it. Few prelim questions; what hboot, are you s-off, what recovery. 99.9% of problems with my rom have been flash related.
For tethering you need to set it to "generic ics" check off mns clamping and routing fix. (That's for 3rd party, I don't think sprint hotspot works)
Sent from my PG86100 using xda app-developers app
beneath-a-burning-turtle said:
Hey there. I would've preferred this posted in my thread, but no biggie, I stumbled across this and thought I'd lend a hand. I can't test 4G since I don't have it in my area. Could be a framework problem but I HIGHLY doubt it. Few prelim questions; what hboot, are you s-off, what recovery. 99.9% of problems with my rom have been flash related.
For tethering you need to set it to "generic ics" check off mns clamping and routing fix. (That's for 3rd party, I don't think sprint hotspot works)
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response. Im new to this forum, but tried to post it on the developer thread, but it said I didnt have enough privledges, it was only for developers....
Anyways, Im running HBoot 1.58 - S-ON
TWRP 1.03
Thank you again
drich66 said:
Thanks for your response. Im new to this forum, but tried to post it on the developer thread, but it said I didnt have enough privledges, it was only for developers....
Anyways, Im running HBoot 1.58 - S-ON
TWRP 1.03
Thank you again
Click to expand...
Click to collapse
No worries, now to asses the problem!
First what I recommend, second will he what you need to do to fix it based on your current setup
1. Get s-off. J-bears trick works with my rom, (I did it with 1.2.1), downgrade to the 1.04 eng hboot, and switch the 4ext recovery. THIS is what would make life easier for you in the long run.
2. In your case, extract boot.img from my rom, put it in your fastboot directory and flash it via fastboot through the following command "fastboot flash boot boot.img" minus the quotes. This should fix any radio related things such as 4G and wifi and whatnot.
I took out the nexus 7 boot animation because it annoyed me lol, that's the only reason why its gone
Sent from my PG86100 using xda app-developers app
beneath-a-burning-turtle said:
No worries, now to asses the problem!
First what I recommend, second will he what you need to do to fix it based on your current setup
1. Get s-off. J-bears trick works with my rom, (I did it with 1.2.1), downgrade to the 1.04 eng hboot, and switch the 4ext recovery. THIS is what would make life easier for you in the long run.
2. In your case, extract boot.img from my rom, put it in your fastboot directory and flash it via fastboot through the following command "fastboot flash boot boot.img" minus the quotes. This should fix any radio related things such as 4G and wifi and whatnot.
I took out the nexus 7 boot animation because it annoyed me lol, that's the only reason why its gone
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Ok, thank you. Im a little new at this, but will give it a shot this weekend, radio seems fine as wifi and 3g is good...theres not even a 4g switch in the settings. But I will let you know, its not a big deal as I only get 4g at work and rest of rom rocks.
drich66 said:
Ok, thank you. Im a little new at this, but will give it a shot this weekend.
Click to expand...
Click to collapse
If you need help or if you get stuck, shoot me a pm and I'll help you out
Sent from my PG86100 using xda app-developers app
Related
This is a guide that hopefully makes things easier so you don't have to use Fastboot but instead use this app....all credit goes to joeykrim......
Searched everywhere and didn't see this info covered. So if this has already been stated, I'm a noob, and I apologize.......
So I found this app made by joeykrim a few days ago to be quite useful......Sadly my EVO 3D came out the box with HBoot 1.50 and my only option was to use HTC's Unlock Method....As you may know this method doesn't allow you to Flash custom kernels or roms with custom kernels baked in VIA recovery....the workaround was that you had to flash by using fastboot.......until now.....
So let's say your running your favorite sense rom, and decide that you wanna try out miui or cyanogenmod or vice versa.......normally you would need your computer to boot into fastboot, but thanks to joeykrims Flash Image GUI app you can flash the AOSP or Sense kernel, then the rom, and there you go....
1st Step: Download and Install this
http://www.google.com/m/url?ei=rS2b...UQFjAH&usg=AFQjCNHcnCXbd0CBHe3gdtDDbSG8eGuM2w
2nd Step: Download an AOSP Kernel if you moving from a sense rom to an AOSP rom.....Download a sense kernel if your moving from an AOSP rom to a sense rom and place it on your sdcard.
3rd Step: Open the app and select Kernel Image.
4th Step: Tap browse and navigate to the .zip that contains your kernel and select it......
5th Step: Tap Flash Image......Wait for it to finish flashing.....
6th Step: Reboot while holding Volume Down button.....
Final Step: Flash the rom that goes with your kernel.....if you just flashed an AOSP Kernel flash an AOSP rom, if you flashed a sense kernel then flash a sense rom......
Enjoy and i hope this was helpful..........
Forum Mod Please sticky this post!!
Does this work and is there a stock aosp kernel floating around? I used to be able to flash cm and miui througj fastboot no problem bit no all of a sudden i just get the htc screen boot loop....
Sent from my PG86100 using xda premium
So anxious to try...craving a custom kernal...will report back
Sent from my PG86100 using xda premium
Tested using kernel worked perfectly!
Sent from my PG86100 using xda premium
Great post! I needed this! Kudos!
Don't forget to hit the thanks button guys.....
Sent from my PG86100 using xda premium
Definately thanks and sticky-worthy. This will help people out like crazy.
Someone pm a mod so we can get this stickied....
Sent from my PG86100 using xda premium
Im on hboot 1.5 and now im stuck on the htc screen. I followed everything to the T but nooooooooo cigar....If anybody could help i would greatly appreciate it!!!
About time people start using this application for that... I been flashing kernels on my testing 1.5boot for a while now lol thought people knew this.
BTW there is a thread on the apps section.
Suprize3131 said:
Im on hboot 1.5 and now im stuck on the htc screen. I followed everything to the T but nooooooooo cigar....If anybody could help i would greatly appreciate it!!!
Click to expand...
Click to collapse
try manually flashing a rom/kernel -> http://infectedrom.com/showthread.php/552-How-to-install-a-kernel-AND-rom-on-S-ON-hboot-1.50-phones.
Thread stuck until someone finds a "cure" for hboot 1.5
Thanks!
Suprize3131 said:
Im on hboot 1.5 and now im stuck on the htc screen. I followed everything to the T but nooooooooo cigar....If anybody could help i would greatly appreciate it!!!
Click to expand...
Click to collapse
Pm me......
Sent from my PG86100 using xda premium
free?
this program isn't free?
OK I don't have 1.5, I am lucky with 1.4 s-off. Thanks for posting this!
BUT, I have a nagging question, and am only asking because I don't entirely understand the unlock process for HTC, and the flashing thereafter.
I the s-off world, if you flash a ROM after a kernel, you din't keep the kernel, because the ROM has one in it. So my logic tells me that as stated in the OP when you flash the kernel first and then the ROM, the same thing would happen. I assume it's because if you flash a ROM on the go with 1.5, and not via fastboot boot recovery, it never writes the boot.img. SO in flashing the kernel first and then the ROM, it actually still holds the kernel flash? Right? Lol sorry, just curious.
Also, if this app bypasses boot security, has anybody tried a splash screen with it to see if it bypasses that too?
/superdupercurious
How do you update your su binary? Having problems will not open the flash gu
Sent from my PG86100 using XDA App
brokensmile209 said:
this program isn't free?
Click to expand...
Click to collapse
It was posted as free by the author. Too lazy to post link - google it.
i have hboot 1.50 i can't use this program, it say device has not granted root access to this application, please root this device, so u need to root your phone?
Same thing with me
Sent from my PG86100 using XDA App
I have been helping out quite a few people lately and thought I would offer my help and knowledge to anyone who needs it. Have a question? Need help finding a file? Hit me up on Gtalk @ [email protected]
I may not be able to answer right away but I will get to you. I did something similar when we got s-off and ended up walking around 30 people through the process. I may not have all the answers but I will do my best to help in any way I can. Apparently others are trying to "help" and if you choose to follow their advice if you brick your phone you are on your own.
apophis9283 said:
I have been helping out quite a few people lately and thought I would offer my help and knowledge to anyone who needs it. Have a question? Need help finding a file? Hit me up on Gtalk @ [email protected]
I may not be able to answer right away but I will get to you. I did something similar when we got s-off and ended up walking around 30 people through the process. I may not have all the answers but I will do my best to help in any way I can.
Click to expand...
Click to collapse
what if i just want someone to talk to?
About what?
Sent from my ADR6425LVW using Tapatalk 2
apophis9283 said:
About what?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Pancake mix of course!
apophis9283 said:
About what?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Idk. Just talk. *foreveralone.jpg*
Sent from my iPhone...
Uh, I could use some help, but not sure if it's up your alley. However I'm not allowed to post in the proper forum because of my n00bness so yeah... Anyway I'm running the new ICS on my Rezound and using the MinimalText widgit. Basically, is there any way to make numbered notifications pop up on the widgets you create and place? An example would be, is I used MinimalText to create a simple "EMAIL" icon. However I want a little notification to be able to pop up on that icon telling me how many new emails I have. Same with SMS. Any help would be cool, and if not no worries. Thanks.
EDIT: See attachment so you get what I'm trying to say
herothekid said:
Uh, I could use some help, but not sure if it's up your alley. However I'm not allowed to post in the proper forum because of my n00bness so yeah... Anyway I'm running the new ICS on my Rezound and using the MinimalText widgit. Basically, is there any way to make numbered notifications pop up on the widgets you create and place? An example iwould be, is I used MinimalText to create a simple "EMAIL" icon. However I want a little notification to be able to pop up on that icon telling me how many new emails I have. Same with SMS. Any help would be cool, and if not no worries. Thanks.
EDIT: See attachment so you get what I'm trying to say
Click to expand...
Click to collapse
I know if you use nova laucher prime there is a secondary app called something like tesla unread. So if the theme works with tesla launcher it could be done. Tesla unread makes its so if i have a text it will have a 1 next to my message icon. here is a link,
you have to use nova launcher with this add-on, https://play.google.com/store/search?q=tesla+unread
Sent from my ADR6425LVW using Tapatalk 2
I have a question. I want to upgrade to the new RUU. I have made a few changes and have no idea where I am with my firmware GB ICS? It works so I leave it alone.
I am S-Off, rooted and relocked but I cannot get the latest OTA update automatically. (Probably because of the custom recovery)
hboot - 2.11.000
radio - 0.95.00.1118r/0.95.00.1223r
Amon-RA recovery 3.13
Software
Android Version 4.0.3
Sense 3.6
Software Number 3.14.605.5 710RD
Where do I start? Removing the Amon-RA?
superchaos said:
I have a question. I want to upgrade to the new RUU. I have made a few changes and have no idea where I am with my firmware GB ICS? It works so I leave it alone.
I am S-Off, rooted and relocked but I cannot get the latest OTA update automatically. (Probably because of the custom recovery)
hboot - 2.11.000
radio - 0.95.00.1118r/0.95.00.1223r
Amon-RA recovery 3.13
Software
Android Version 4.0.3
Sense 3.6
Software Number 3.14.605.5 710RD
Where do I start? Removing the Amon-RA?
Click to expand...
Click to collapse
I think if you run the .12 RUU you should be back on track to receive OTA's again, if not mistaken.
Just download the new RUU name it PH98IMG and flash it in bootloader (hboot). Afterwards you will need to flash a recovery and youll be all set. Being locked, unlocked is irrelevant as long as your s-off. Meaning you never need to unlock as long as your s-off.
Sent from my ADR6425LVW using Tapatalk 2
esheesle said:
I think if you run the .12 RUU you should be back on track to receive OTA's again, if not mistaken.
Click to expand...
Click to collapse
Thats not what he was asking. He wanted to know where to start in the whole process.
Sent from my ADR6425LVW using Tapatalk 2
Ok, I was a little confused with the GB / ICS firmware talk. Figured I would just leave it alone. I will back everything up through the recovery and get this done. Thanks!
superchaos said:
Ok, I was a little confused with the GB / ICS firmware talk. Figured I would just leave it alone. I will back everything up through the recovery and get this done. Thanks!
Click to expand...
Click to collapse
You dont ever want to mix them. The RUU contains the rom, firmware,radios etc.. you will be fine. Im on gtalk if you need help. My email should be in the op if not ill add it.
Sent from my ADR6425LVW using Tapatalk 2
superchaos said:
I have a question. I want to upgrade to the new RUU. I have made a few changes and have no idea where I am with my firmware GB ICS? It works so I leave it alone.
I am S-Off, rooted and relocked but I cannot get the latest OTA update automatically. (Probably because of the custom recovery)
hboot - 2.11.000
radio - 0.95.00.1118r/0.95.00.1223r
Amon-RA recovery 3.13
Software
Android Version 4.0.3
Sense 3.6
Software Number 3.14.605.5 710RD
Where do I start? Removing the Amon-RA?
Click to expand...
Click to collapse
Relock and run the newest ics ruu you will need to re flash recovery of your choice when your done
Sent from my ADR6425LVW using xda app-developers app
You are on the last gingerbread release. Run the new RUU as stated and if you decide on AmonRA for recovery make sure you use v3.15. 3.13 will not work on ICS firmware.
Squirrel1620 said:
Relock and run the newest ics ruu you will need to re flash recovery of your choice when your done
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Stop giving advice. You all arent even reading. He doesnt need to relock hes s-off. Please stop giving bad advice. I started this thread to help people and you all have turned it into noob central. ONLY IF YOU ARE 100% YOU KNOW THE ANSWER, YOU MAY RESPOND.
Sent from my ADR6425LVW using Tapatalk 2
apophis9283 said:
Stop giving advice. You all arent even reading. He doesnt need to relock hes s-off. Please stop giving bad advice. I started this thread to help people and you all have turned it into noob central. ONLY IF YOU ARE 100% YOU KNOW THE ANSWER, YOU MAY RESPOND.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I must have missed the part where only you can respond, last I checked that's what pm's are for.
Back on topic, I misread but yeah dude just running the ruu will get you all set. But if you made a nandroid on gb firmware you cannot restore it on ics firmware you'll have to start fresh
Sent from my ADR6425LVW using xda app-developers app
Youre right , i did it this way because of people like you. Apparently you cant read. What if he took your advice and had an eng hboot? He would have bricked his phone. This is my thread. I will run it as i see fit. If you cant stay out of it i will ask mods to close so you cant go around giving bad advice and will only post my gtalk acct. Also re posting advice that ive already given him is annoying and just makes more post people have to go through to find answers
Sent from my ADR6425LVW using Tapatalk 2
UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound
Support thread for the community
Note: This is the official support thread for my ROM UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound. If you are having trouble and need a little help, this is the place to ask questions. DO NOT post your question in my ROM's thread in the development section. Post them here.
Please consider checking the Frequently Asked Questions section for my ROM first to see if there is an answer for your question. If there is not, then by all means feel free to post your question!
Click to expand...
Click to collapse
Thanks in advance to the users of my ROM who may also help out answering questions that get posted in this thread
Original question
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing.
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Reply
I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot. Don't try that until we can get a better answer though. Lets move this question over to the support thread.
Sent from my ADR6425LVW using xda app-developers app
zkrp5108 said:
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
darkghost568 said:
Yep. That's the newest HBOOT.
Click to expand...
Click to collapse
zkrp5108 said:
So how do I go about updating the baseband versions
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
wildstang83 said:
Q6
Click to expand...
Click to collapse
zkrp5108 said:
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Like I was saying, I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot.
So if you download the RUU and open it up with an archive manger like 7Zip you can see a bunch of files:
adsp.img
android-info.txt
boot_signed.img
dzdata_16g.hdr
dzdata_16g.img
hboot_8x60-lte_2.27.0000_120803_MR2_signedbyaa.nb0
mdm9k.img
mdmrcdata_3.01_002.img
pg2fs_spcustom.img
radio.img
ramdisk.img
rcdata_1.16.002.img
recovery_signed.img
rpm.img
sbl1.img
sbl2.img
sbl3.img
splash1.nb0
system.img
tp_atmel224e_1101.img
tz.img
I think your supposed to remove everything but android-info.txt and radio.img and just close the zip, rename it to PH98IMG.zip and flash in HBOOT. I'd rather you not do this though until someone gives us a better answer as I rarely mess with radios and such. Things are quite a bit different than what they were on the Incredible.
Right on
Sent from my ADR6425LVW using xda app-developers app
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
rghart09 said:
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
Click to expand...
Click to collapse
Hmm, yea that is definitely not normal and isn't a known bug, with this Rom at least. I'm assuming your Rezound is on the very latest firmware and you have followed the install instructions perfectly right? Are you using other kernels with this rom and thats what causing the problem, or does it do it on the stock kernel as well?
EDIT: Also does the bug continue if a different launcher is used like Apex, Nova, Launcher Pro or ADW EX?
I am s-off I am going to do an ruu and see if it is fixed. I have tried multiple Roms including yours ,shrike's, and Neo's, each with the kernel the ROM comes with. I had shrike's pacman for a while and it never had this issue.
Hboot-2.27.00 I'm sorry but where do I find the firmware info? Or does the hboot suffice?
Settings / About phone / Baseband version. Also I asked about the launcher. Does using a different one fix the problem?
Sent from my SCH-I605 using Tapatalk 2
The baseband version is 2.22.10.0801r, 2.22.10.0803r
I installed apex and it acts the same.
Sent from my Nexus 7 using Tapatalk 2
The only other reports I can find related to your issue were caused by defected screens on certain devices. The cause is slight screen lift at the top. The effect would be the Status bar could not be dropped down, could only sometimes be dropped down, or could be dropped down most of the time with a minor issue getting the shade to pull down ever so often. I'd suggest RUUing back to stock and if the issue is still there, send the phone in for repair or replacement.
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
hollisjamison said:
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
Click to expand...
Click to collapse
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
KnightDavid said:
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
Click to expand...
Click to collapse
Figured it out, you have to relock your bootloader to install RUUs. Just installed the RUU... S-OFF next, then install CM 10.1
zkrp5108 said:
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Not yet. Hoping someone will know...
Sent from my SCH-I605 using Tapatalk 2
What are the benefits of the newer radios?
Battery life better signal strength global calling
Sent from my ADR6425LVW using xda app-developers app
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
rghart09 said:
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ah that is good to see. Very happy it worked for you
okay, i can't seem to get the RUU to actually update and install for some reason, i dloaded it, checked the MD5 and renamed it. all it will do is recognize it, check it. and then stops there anyone able to point me to an instruction set (already tried and Dloaded Wildstang's)
Having a problem with my 4G. After I unlocked the bootloader with Team Fireball's toolkit, it was working. It stopped after I flashed a CyanogenMod Official (Nightly) ROM to it. I have tried to flash some fireball radios for it, but they won't seem to flash at all. Any ideas??
vazersecurity said:
Having a problem with my 4G. After I unlocked the bootloader with Team Fireball's toolkit, it was working. It stopped after I flashed a CyanogenMod Official (Nightly) ROM to it. I have tried to flash some fireball radios for it, but they won't seem to flash at all. Any ideas??
Click to expand...
Click to collapse
Read this post in Mdmower's thread. CM may have broken your radios. It is fixable though.
http://forum.xda-developers.com/showthread.php?p=37272046
Sent with my Dinc4G
Attempting
DavDoc said:
Read this post in Mdmower's thread. CM may have broken your radios. It is fixable though.
http://forum.xda-developers.com/showthread.php?p=37272046
Sent with my Dinc4G
Click to expand...
Click to collapse
Thanks, I will attempt to fix it and let you know how it goes.
--
I attempted he fix but it was a no-go. I still only have 3G (eHRPD) working. What could be causing this? I even went S-OFF and reflashed the stock radio again. That didn't do anything either. I have a screenshot of what the radio settings are.
Would flashing the RUU do the trick?
Sent from my Incredible 4G LTE using xda app-developers app
vazersecurity said:
Would flashing the RUU do the trick?
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
did you flash the boot image using fastboot commands, this is required if s-on or if you flash one of nitsuj's roms
Hey I'm new here. Been lurking for awhile hehe
Anyways to the point, just wanted to say how I also have the no 4G connectivity problem also. I unlocked bootloader using unlock script. and then flashed twrp recovery, then installed Venoms Viper LTE rom and then flashed the upgrade to 2.0.0. This is all I've done as far as rooting and flashing is concerned other than going back to stock to try to recover 4g usability. So I'm assuming that means I'm s-on as well. would flashing the boot image like you said help me? I have already tried replacing the SIM with a new one but that didn't help and Im not sure as to what I should try next. Not trying to hijack your post just wanted to make sure it didn't get buried and we can hopefully find a solution to our problem. Strength in numbers and all that.
By the way I had my phone since last September and then two to three weeks after ownership I went ahead and rooted it and flashed new ROM because I knew it was, well, in need lol. Haven't had 4G since then but I tweaked 3G settings so that it's usable lol.
souls1987 said:
Hey I'm new here. Been lurking for awhile hehe
Anyways to the point, just wanted to say how I also have the no 4G connectivity problem also. I unlocked bootloader using unlock script. and then flashed twrp recovery, then installed Venoms Viper LTE rom and then flashed the upgrade to 2.0.0. This is all I've done as far as rooting and flashing is concerned other than going back to stock to try to recover 4g usability. So I'm assuming that means I'm s-on as well. would flashing the boot image like you said help me? I have already tried replacing the SIM with a new one but that didn't help and Im not sure as to what I should try next. Not trying to hijack your post just wanted to make sure it didn't get buried and we can hopefully find a solution to our problem. Strength in numbers and all that.
By the way I had my phone since last September and then two to three weeks after ownership I went ahead and rooted it and flashed new ROM because I knew it was, well, in need lol. Haven't had 4G since then but I tweaked 3G settings so that it's usable lol.
Click to expand...
Click to collapse
if you flashed viper the boot image is not in the rom zip, yes you need to flash boot image it contains the kernel and wifi modules
I am S-OFF. But I tried switching my CDMA Subscription (CyanogenMod 10.1) (Settings --> Wireless & Networks - More --> Mobile Networks --> CDMA Subscriptions) from RUIM/SIM to NV. That did fix the 4G connectivity problem, but it disabled calling and texting abilities. What could this mean? And what boot IMG were you talking about?
Sent from my Incredible 4G LTE using xda app-developers app
Still no ideas? The place you said didn't work.
Sent from my ADR6410LVW using xda app-developers app
Now I have other theories. But don't know if they're right. For one, I looked up a sim card reader (https://play.google.com/store/apps/details?id=com.okata.app.simcardlist) and it says my radio is CDMA. Doesn't even mention LTE at all. Not sure, but yeah.
Sent from my ADR6410LVW using xda app-developers app
Alrighty, after searching through the forum with no success, here i am for suggestions/solutions
So my evo seems to only boot a small handful of roms. Currently its on Viper4g, previously it was cm 10.1 but that no longer boots. It does work with the stock basedsuperjelly rom.
Ive tried to flash Dirty Unicorn, Carbon unoffical, MIUI and some others but all of them dont even get to the boot screen. All of them either end up sitting at their own boot logo forever or dont even get past the HTC logo when first turned on
My TWRP is the latest(2.5), the roms are in no way corrupted, ive made sure of this. Ive wiped before every install, followed all directions etc.
Also Hboot is 1.19.0000
Whats the deal here? Can i not use roms above a certain android version? (Viper is 4.1, so is Superjelly)
I have no idea what could be causing it
All i know is i want to flash some different roms
Read this:
http://forum.xda-developers.com/showthread.php?t=2256478
The issue is that you need to install the kernel separately from the ROM when you are S-on when running Hboot 1.15 or newer. Many Sense ROM's include an S-on kernel installer to help facilitate ROM flashing.
Sent from my EVO using xda premium
FinZ28 said:
Read this:
http://forum.xda-developers.com/showthread.php?t=2256478
The issue is that you need to install the kernel separately from the ROM when you are S-on when running Hboot 1.15 or newer. Many Sense ROM's include an S-on kernel installer to help facilitate ROM flashing.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I guess I didnt look hard enough
Thank you sir, i appreciate the swift reply
Ill try it out
WEllP, I tried it the app way and it didnt work, in the process my backups magically broke and roms that worked didnt work. Luckily for thr second time, SuperJelly saved the day and booted after a flash. I hate to be stuck on superjelly (too stockish for me) but it looks like i have no choice.
Sukhol said:
WEllP, I tried it the app way and it didnt work, in the process my backups magically broke and roms that worked didnt work. Luckily for thr second time, SuperJelly saved the day and booted after a flash. I hate to be stuck on superjelly (too stockish for me) but it looks like i have no choice.
Click to expand...
Click to collapse
Try going S-off. You won't encounter these issues and you can flash any rom you want practically.
http://forum.xda-developers.com/showthread.php?t=2321072
Sukhol said:
Alrighty, after searching through the forum with no success, here i am for suggestions/solutions
So my evo seems to only boot a small handful of roms. Currently its on Viper4g, previously it was cm 10.1 but that no longer boots. It does work with the stock basedsuperjelly rom.
Ive tried to flash Dirty Unicorn, Carbon unoffical, MIUI and some others but all of them dont even get to the boot screen. All of them either end up sitting at their own boot logo forever or dont even get past the HTC logo when first turned on
My TWRP is the latest(2.5), the roms are in no way corrupted, ive made sure of this. Ive wiped before every install, followed all directions etc.
Also Hboot is 1.19.0000
Whats the deal here? Can i not use roms above a certain android version? (Viper is 4.1, so is Superjelly)
I have no idea what could be causing it
All i know is i want to flash some different roms
Click to expand...
Click to collapse
FacePalm is wayyyyyyyyyy easier get that bad boy s-off
bigdaddy619 said:
FacePalm is wayyyyyyyyyy easier get that bad boy s-off
Click to expand...
Click to collapse
I really appreciate you guys and your patience with nubs. Thanks
After trying so long to avoid it, i guess ill try to go S off
Sukhol said:
I really appreciate you guys and your patience with nubs. Thanks
After trying so long to avoid it, i guess ill try to go S off
Click to expand...
Click to collapse
Get it done. You won't regret it
Sent from my EVO using xda premium
Sukhol said:
I really appreciate you guys and your patience with nubs. Thanks
After trying so long to avoid it, i guess ill try to go S off
Click to expand...
Click to collapse
It will also make everything a lot easier. You can also look in to Moonshine s-off
Nick4208 said:
It will also make everything a lot easier. You can also look in to Moonshine s-off
Click to expand...
Click to collapse
Moonshine won't work. He's on Hboot 1.19. He can use Facepalm, though.
Sent from my EVO using xda premium
FinZ28 said:
Moonshine won't work. He's on Hboot 1.19. He can use Facepalm, though.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Sorry I didnt realize that. I guess I should pay more attention when I read.
Nick4208 said:
Sorry I didnt realize that. I guess I should pay more attention when I read.
Click to expand...
Click to collapse
No worries
Sent from my EVO using xda premium
FinZ28 said:
Moonshine won't work. He's on Hboot 1.19. He can use Facepalm, though.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Oh, forgot to add, thanks all
I went s off with facepalm, special thanks to beaups for helping me with some errors i was getting
Currently trying out dirty unicorns and loving it