[Q] [SOLVED] problems getting alt. baseband on ray with cm9.1 - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

hey guys,
slowly i'm getting a little bit desperate actually i'm not sure, if my problem at the moment is flashtool or cyanogenmod 9.1 which brought ics on my phone or whatever. hope you can help me
i have an xperia ray and was on stock gingerbread 4.0.2.A.0.69 with baseband 8x55A-AAABQOAZM-203028D-66. but as the stock xperia included kraken facebook stuff, i finally wanted to get rid of it, so stock ics was no option. then i heard of cyanogenmod, which my friend had installed on his samsung galaxy s, and it worked perfectly there out of the box, so i wanted cm as well...
so on friday i installed cm9.1 stable from download.cyanogenmod.com/?type=stable&device=urushi following this guide: wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Ray:_Full_Update_Guide
everything worked fine except of no phone and mobile data connection. i researched, and it seems the xperia ray wants baseband 72 to work properly. so i installed latest flashtool 0.9.3.0, installed the proper drivers with flashtool-drivers.exe fomr flashtool folder "drivers" and tried. the second try i finally managed to get the ray's green light signaling flashmode, but flashtool disconnected in between, and on the ray one could see an image that looked like a glass with a green liquid in it... well, as flashtool had closed the connection, i waited a little bit and - as nothing happened - unplugged the usb cable and tried to reboot the ray fearing that i had bricked it. actually i didn't, the ray booted up, _and_ i had phone and mobile data connection! so i thought everything was fine even as my phone info still says "Baseband: 8x55A-AAABQOAZM-203028D-66". first i thought "anyways, everything works fine".
and so it seemed, but today as i was visting my parents, where i normally have a fine phone and mobile data connection, there was nearly nothing, and so i thought, i have to get bb72! but i don't get the ray into flashmode anymore
i read tons of guides, tried several variations of plugging and unplugging points of time... no way... somehow i also fear that my problem might be that flashtool wants the phone to have usb debugging and msc mode on, which i did, and when i start flashtool with the phone plugged in it says "Device connected with USB debugging on", but after the unplugging, shutting down the phone and connecting it again with the back-button pushed and holding it says "Device connected with USB debugging off" and "For 2011 devices line, be sure you are not in MTP mode". maybe that's because i don't get the device into "green light flashmode" or maybe (as i had read about meanwhile) because with ics msc isn't (fully) supported anymore?
so, can you please help me? any suggestions how i can get that baseband flashed on my phone? should i try it with the linux version of flashtool, or are there still any possibilities on windows (xp sp3)?
thx a lot, and by the way: phantastic work, that all you developing guys and helpers do for us!
my current system:
Phone: Xperia Ray (Urushi)
Android: 4.0.4 [ICS]
Baseband: 8x55A-AAABQOAZM-203028D-66
Kernel: 2.6.32.9-FXP [email protected] #1
Rom: Cyanogenmod 9.1.0-urushi
the flashtool log (looks always like this):
Code:
09/004/2012 18:04:47 - INFO - <- This level is successfully initialized
09/004/2012 18:04:47 - INFO - Flashtool Version 0.9.3.0 built on 2012-09-06 19:32:51
09/004/2012 18:04:47 - INFO - You can drag and drop ftf files here to start flashing them
09/004/2012 18:04:52 - INFO - Device connected with USB debugging on
09/004/2012 18:04:52 - INFO - Connected device : ST18
09/004/2012 18:04:52 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call
binary.
09/004/2012 18:04:52 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-FXP
09/004/2012 18:04:52 - INFO - Root Access Allowed
09/005/2012 18:05:08 - INFO - Selected ST18i_8x55A-AAABQOAZM-203028G-72_baseband.ftf
09/005/2012 18:05:08 - INFO - Preparing files for flashing
09/005/2012 18:05:08 - INFO - Please connect your device into flashmode.
09/005/2012 18:05:14 - INFO - Device disconnected
09/006/2012 18:06:28 - INFO - Device connected with USB debugging off
09/006/2012 18:06:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/006/2012 18:06:38 - INFO - Device disconnected
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
thx a lot!
lyrabee
EDIT: hey again... i finally managed to get into the green light flashmode somehow, but flashtool still says:
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
so i looked around, if there is maybe any other way to get that baseband flashed on the system, and i found a thread called "[Q] Flashing .ftf file without flashtool?" that states, it was possible with fastboot: forum.xda-developers.com/showthread.php?t=1562110
so i'd like to try that. unfortunately that thread got stuck exactly at the point where it was about getting the right commands to flash certain files - e.g. for a baseband
what i did so far is: i renamed the baseband-ftf to zip and unzipped the zip. the following files are included:
adsp.sin
amss.sin
amss_fs_urushi.sin
apps_log.sin
fota0.sin
fota1.sin
loader.sin
plus a folder called META-INF, but i guess that one isn't needed.
to flash the boot.img, when installing cm9.1 the cm-guide posts that command:
fastboot -i 0xfce flash boot boot.img
the guy from the thread "[Q] Flashing .ftf file without flashtool?" posts those examples:
fastboot flash boot kernel.img
fastboot flash system system.img
fastboot flash userdata userdata.img
so, what are the commands to flash those "sins"? and do i have to use that "-i 0xfce" part, or is "fastboot flash" enough?
hope, someone can help me with that
thx a lot again!
lyrabee

---

Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!

---

jomofer said:
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
Click to expand...
Click to collapse
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?

---

lyrabee said:
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
Click to expand...
Click to collapse
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee

---

lyrabee said:
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
Click to expand...
Click to collapse
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.

---

evilbarcode said:
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
Click to expand...
Click to collapse
hope, i won't have to flash around too often but thx for the tip
what i also found out accidentally yesterday, is the fact that msc actually works properly on ics/cm9.1, if you explicitly tell your device to connect as mass storage.
before the upgrade to ics i simply plugged the ray into the pc or mac, and the micro sdcard showed up like an additional volume. it didn't anymore after the upgrade. the device said something like "usb connected" in the info bar, but nothing more happened.
yesterday i checked that message in the info bar more accurately, even tapped on it, and tadaaa, the option was shown to "turn on usb storage": jayceooi.com/wp-content/uploads/2012/03/SGS2-ICS-USB-Mass-Storage.jpg
so easy and so far away simultaneously; unbelievable. anyways, i have "real" msc now again