Related
Today i updated my NEO in PC Companion software. Now after update it wont boot.
If i long press the power bottun it just vibrates shortly and nothing happens, sometimes i get a short green flash from the led. but nothing else.
what to do?
Hi bro more info needed.
Like what were you on ,firmware.....
Were you rooted .or open bootloader
Or was it just new / or on 2.3.2 to 2.3.3/4
Could the download of the file in sony ericsson be corrupt
......let is know
Sent from my MT15i using xda premium
http://androidflip.com/how-to-update-sony-ericsson-xperia-neo-to-2-3-4-gingerbread-update/
That's all you need.
sent from Xperia neo
kormatoes said:
Hi bro more info needed.
Like what were you on ,firmware.....
Were you rooted .or open bootloader
Or was it just new / or on 2.3.2 to 2.3.3/4
Could the download of the file in sony ericsson be corrupt
......let is know
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
ok here's the deal... its my wifes phone and she updated last night. So i really dont know what version firmware was on it before, but the update that was applied was the new .283 update.
It was not rooted and not messed with booloader or anything, just stock 2.3.3.
himanshpahwa said:
http://androidflip.com/how-to-update...rbread-update/
That's all you need.
sent from Xperia neo
Click to expand...
Click to collapse
Is this the way to do it? Can i keep the settings/data this way?
Just go ahead and follow the steps
I'm sure it will work for you.
But the data will be lost.
sent from Xperia neo
Good luck with following the steps and let us know if you have any trouble with it, hope you can get the phone unbricked.
Thank you all, for your help!
Actually I just unticked, the "wipe data" box in flash tools and the phone is now updated and fully working with all data intact... :-D
Thank God for xda!
Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!!
follow my thread and everything will be fine.
http://forum.xda-developers.com/showthread.php?t=1324707
04/025/2012 13:25:50 - ERROR - Please plug you device in flash mode
04/025/2012 13:25:51 - INFO - Searching Xperia....
04/025/2012 13:25:51 - ERROR - Please plug you device in flash mode
04/025/2012 13:25:52 - INFO - Searching Xperia....
04/025/2012 13:25:52 - ERROR - Please plug you device in flash mode
04/025/2012 13:25:53 - INFO - Searching Xperia....
04/025/2012 13:25:53 - ERROR - Please plug you device in flash mode, etc my phone cannot be seen no more by the pc, but it worked perfect in the past flash mode, fastboot mode "se" screen pops up whithout turnig on the phone and remains, dont know what happened to this phone
Take your battery for at least 5 seconds.
Put it back again.
Press back button and connect the cable with the back button pressed.
Then start fota unbrick.
Try it several times.
Sometimes and thats weird the computer as problems connecting to phone.
I warrant you that the thing works and you are with the right problem.
Your trim area is damaged.
Thanks! I've tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:45 PM ---------- Previous post was at 11:28 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)
Look, read carefully.
You can´t have that log, this log shows that your phone is connected (powered on).
Withou green line you re not ready to go.
Just follow as I´ve writted before.
Battery of for 5 secs. take the back button and plug the cable. After that you must run fota unbrick.
then just flash and your phone should be good.
If not PM and I give you another solution.
Thank you again! I tried, my phone was bricked before, but I've managed every time to get into the flash mode, and flashing it succesfully. This time is bad, i pulled the batery out for hours, coonect the batery-nothing happens, push the back button-nothing happens, While holding the back button-conect the usb port to pc-after 3-4 secs, that "sony ericsson" screen apears (no green logo, just the writting) no green led, somehow pc companion tells me i'm "connected" and shows me further steps, but on the phone it's just that "se" writting. No mather how bricked was my phone before, It allways got into the flash mode (1-4tries) I even reinstaled Windows, drivers, hope I want damage the usb port of the phone Have a great day!
hey guys,
slowly i'm getting a little bit desperate actually i'm not sure, if my problem at the moment is flashtool or cyanogenmod 9.1 which brought ics on my phone or whatever. hope you can help me
i have an xperia ray and was on stock gingerbread 4.0.2.A.0.69 with baseband 8x55A-AAABQOAZM-203028D-66. but as the stock xperia included kraken facebook stuff, i finally wanted to get rid of it, so stock ics was no option. then i heard of cyanogenmod, which my friend had installed on his samsung galaxy s, and it worked perfectly there out of the box, so i wanted cm as well...
so on friday i installed cm9.1 stable from download.cyanogenmod.com/?type=stable&device=urushi following this guide: wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Ray:_Full_Update_Guide
everything worked fine except of no phone and mobile data connection. i researched, and it seems the xperia ray wants baseband 72 to work properly. so i installed latest flashtool 0.9.3.0, installed the proper drivers with flashtool-drivers.exe fomr flashtool folder "drivers" and tried. the second try i finally managed to get the ray's green light signaling flashmode, but flashtool disconnected in between, and on the ray one could see an image that looked like a glass with a green liquid in it... well, as flashtool had closed the connection, i waited a little bit and - as nothing happened - unplugged the usb cable and tried to reboot the ray fearing that i had bricked it. actually i didn't, the ray booted up, _and_ i had phone and mobile data connection! so i thought everything was fine even as my phone info still says "Baseband: 8x55A-AAABQOAZM-203028D-66". first i thought "anyways, everything works fine".
and so it seemed, but today as i was visting my parents, where i normally have a fine phone and mobile data connection, there was nearly nothing, and so i thought, i have to get bb72! but i don't get the ray into flashmode anymore
i read tons of guides, tried several variations of plugging and unplugging points of time... no way... somehow i also fear that my problem might be that flashtool wants the phone to have usb debugging and msc mode on, which i did, and when i start flashtool with the phone plugged in it says "Device connected with USB debugging on", but after the unplugging, shutting down the phone and connecting it again with the back-button pushed and holding it says "Device connected with USB debugging off" and "For 2011 devices line, be sure you are not in MTP mode". maybe that's because i don't get the device into "green light flashmode" or maybe (as i had read about meanwhile) because with ics msc isn't (fully) supported anymore?
so, can you please help me? any suggestions how i can get that baseband flashed on my phone? should i try it with the linux version of flashtool, or are there still any possibilities on windows (xp sp3)?
thx a lot, and by the way: phantastic work, that all you developing guys and helpers do for us!
my current system:
Phone: Xperia Ray (Urushi)
Android: 4.0.4 [ICS]
Baseband: 8x55A-AAABQOAZM-203028D-66
Kernel: 2.6.32.9-FXP [email protected] #1
Rom: Cyanogenmod 9.1.0-urushi
the flashtool log (looks always like this):
Code:
09/004/2012 18:04:47 - INFO - <- This level is successfully initialized
09/004/2012 18:04:47 - INFO - Flashtool Version 0.9.3.0 built on 2012-09-06 19:32:51
09/004/2012 18:04:47 - INFO - You can drag and drop ftf files here to start flashing them
09/004/2012 18:04:52 - INFO - Device connected with USB debugging on
09/004/2012 18:04:52 - INFO - Connected device : ST18
09/004/2012 18:04:52 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call
binary.
09/004/2012 18:04:52 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-FXP
09/004/2012 18:04:52 - INFO - Root Access Allowed
09/005/2012 18:05:08 - INFO - Selected ST18i_8x55A-AAABQOAZM-203028G-72_baseband.ftf
09/005/2012 18:05:08 - INFO - Preparing files for flashing
09/005/2012 18:05:08 - INFO - Please connect your device into flashmode.
09/005/2012 18:05:14 - INFO - Device disconnected
09/006/2012 18:06:28 - INFO - Device connected with USB debugging off
09/006/2012 18:06:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/006/2012 18:06:38 - INFO - Device disconnected
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
thx a lot!
lyrabee
EDIT: hey again... i finally managed to get into the green light flashmode somehow, but flashtool still says:
09/006/2012 18:06:55 - INFO - Device connected with USB debugging off
09/006/2012 18:06:55 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2012 18:07:08 - INFO - Device disconnected
so i looked around, if there is maybe any other way to get that baseband flashed on the system, and i found a thread called "[Q] Flashing .ftf file without flashtool?" that states, it was possible with fastboot: forum.xda-developers.com/showthread.php?t=1562110
so i'd like to try that. unfortunately that thread got stuck exactly at the point where it was about getting the right commands to flash certain files - e.g. for a baseband
what i did so far is: i renamed the baseband-ftf to zip and unzipped the zip. the following files are included:
adsp.sin
amss.sin
amss_fs_urushi.sin
apps_log.sin
fota0.sin
fota1.sin
loader.sin
plus a folder called META-INF, but i guess that one isn't needed.
to flash the boot.img, when installing cm9.1 the cm-guide posts that command:
fastboot -i 0xfce flash boot boot.img
the guy from the thread "[Q] Flashing .ftf file without flashtool?" posts those examples:
fastboot flash boot kernel.img
fastboot flash system system.img
fastboot flash userdata userdata.img
so, what are the commands to flash those "sins"? and do i have to use that "-i 0xfce" part, or is "fastboot flash" enough?
hope, someone can help me with that
thx a lot again!
lyrabee
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
jomofer said:
Hi,
How are you trying to put your device in flashmode? If you do exactly what flashtool says, you wont get it.
You have to turn off your device, select flashmode in flashtool, press and hold Volume Down Key and then connect the phone to your PC.
The Back Key is not functioning for our Xperia, but Volume Down yes!
Click to expand...
Click to collapse
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
lyrabee said:
hi,
hm, i'll give it a try, but all the guides i found concerning the ray explicitly wrote about the back/return button like e.g. this one here talk.sonymobile.com/thread/24433
and as i wrote in my original post and in my edit i managed to get into green light mode with back/return button, but flashtool "just" didn't recognise that the ray anyways - despite it being connected with usb debugging and msc mode on - which is because of a problem concerning ics and msc mode i fear...
but i'll try it with volume down anyways. there can't happen more than before
is there anybody out there who possibly might help me with the fastboot solution?
Click to expand...
Click to collapse
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
lyrabee said:
OMG! jomofer, you are my hero! it worked, it worked right away with the first try of using the volume down button :victory: i'm on baseband 72 now! thx thx thx again!!!11!
lyrabee
Click to expand...
Click to collapse
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
evilbarcode said:
Also i dont know if it happens on the newer flashtool version but if you leave it connected to flashmode for too long it automatically breaks the connection. you should always drag'n'drop the ftf into flashtool and set alll that up and only enter flashmode when it tells you too after its all ready to go.
Click to expand...
Click to collapse
hope, i won't have to flash around too often but thx for the tip
what i also found out accidentally yesterday, is the fact that msc actually works properly on ics/cm9.1, if you explicitly tell your device to connect as mass storage.
before the upgrade to ics i simply plugged the ray into the pc or mac, and the micro sdcard showed up like an additional volume. it didn't anymore after the upgrade. the device said something like "usb connected" in the info bar, but nothing more happened.
yesterday i checked that message in the info bar more accurately, even tapped on it, and tadaaa, the option was shown to "turn on usb storage": jayceooi.com/wp-content/uploads/2012/03/SGS2-ICS-USB-Mass-Storage.jpg
so easy and so far away simultaneously; unbelievable. anyways, i have "real" msc now again
Hello all.
Please help me. I've committed a grave mistake. I bought my Xperia Ray about 2 months ago(It stopped showing up in retail stores, bought it online for a good price from a reputed online store, brand new.) After loads of thinking and looking at the pros and cons, and gaining some basic knowledge, I decided to root it today. I was following this guide: [Link] I'm new so XDA wont let me put it. Google Root Your Xperia Phone Without Voiding Warranty. Click the first link. Site is mytechencounters.wordpress.com.
Everything was going well. Sort of. Flashtool would show an error while trying to flash. I installed the drivers from the flashtool drivers folder, connected my phone in flash mode and started flashing. Then I realized that wipe data, wipe cache and wipe app log were checked. So I disconnected my phone. It was about 40-60 % done. Now it is not switching on. When I hold the power button, it gives that short vibration like it's supposed to before switching on, but it doesn't switch on. When I connect it, flashtool shows phone connected then disconnected again and again in its log. I hope I haven't bricked my phone. Please help me. Stock ROM 2.3.4. Build Number: 4.0.2.A.0.62
Please help me. My dad is away for a few days. If he returns and finds out, I'm dead! :crying:
Thanks in advance.
can you still get in to flashmode? take out the battery, wait for about 30 seconds and reconnect in flashmode (connect usb to pc first, the connect phone to usb while holding volume down) the LED light should turn green if you're in flashmode.
If you can enter flashmode, you can easily flash back the stock rom and kernel and have your phone running again.
eus4ni4 said:
can you still get in to flashmode? take out the battery, wait for about 30 seconds and reconnect in flashmode (connect usb to pc first, the connect phone to usb while holding volume down) the LED light should turn green if you're in flashmode.
If you can enter flashmode, you can easily flash back the stock rom and kernel and have your phone running again.
Click to expand...
Click to collapse
It does seem to get into flash mode. How do I make it return to stock?
****. Flash mode seems messed up. I looked around the web, and found out that I can go back to stock using PC Companion. I tried that but neither that nor anything else will work because the phone disconnnects and reconnects again and agian and again on its own. I tried other USB ports too but same problem. Oh God I'm doomed I've bricked my phone just after 2 months! :crying: :crying: :crying:
Androman117 said:
It does seem to get into flash mode. How do I make it return to stock?
Click to expand...
Click to collapse
Try this method.
Fix hard bricked ray
Wechy77 said:
Try this method.
Fix hard bricked ray
Click to expand...
Click to collapse
Thanks I'll try that out. The guy says that I have to uninstall PC Companion and Sony drivers before installing SEUS. Necessary? Because installing them was a pain. Also, SEUS will install the latest ROM. Does that mean ICS? I really don't want ICS right now. Stock 2.3.4 with Build Number: 4.0.2.A.0.62 is what I need.
Androman117 said:
Thanks I'll try that out. The guy says that I have to uninstall PC Companion and Sony drivers before installing SEUS. Necessary? Because installing them was a pain. Also, SEUS will install the latest ROM. Does that mean ICS? I really don't want ICS right now. Stock 2.3.4 with Build Number: 4.0.2.A.0.62 is what I need.
Click to expand...
Click to collapse
I don't bricked (yet) my ray, so i don't know. I think you must uninstall them, to get new drivers working. If SEUS (or SUS) flashed new rom and is ICS, then you can allways flash GB ftf any time you want via flashtool.
Or you can try this one!! Turn your brick into a smartphone
http://forum.xda-developers.com/showthread.php?t=1568792
zerorated24 said:
Or you can try this one!! Turn your brick into a smartphone
http://forum.xda-developers.com/showthread.php?t=1568792
Click to expand...
Click to collapse
I think this won't work, because it's necessary to flash after doing an ota update on unlocked bootloader...
@OP have you installed all drivers from flashtool -> drivers? Try it on another PC and connect the phone only after there is the popup to connect. Turn phone off, hold volume down and while holding it plug the usb, it will start flashing automaticly
If this won't work, bring it to a local shop or send it to sony and you can hope they will repair your software :good:
mihahn said:
I think this won't work, because it's necessary to flash after doing an ota update on unlocked bootloader...
@OP have you installed all drivers from flashtool -> drivers? Try it on another PC and connect the phone only after there is the popup to connect. Turn phone off, hold volume down and while holding it plug the usb, it will start flashing automaticly
If this won't work, bring it to a local shop or send it to sony and you can hope they will repair your software :good:
Click to expand...
Click to collapse
I guess I have to go to the service center after all. Let's give this one last shot though.
If you've followed this thread from the beginning, you know my phone wasn't booting. So, I installed SEUS and clicked update while my phone was connected. SEUS downloaded and installed the latest official ICS ROM. My phone started and was working alright(I anticipated all the lag and instability, no surprises there). Now, I tried to downgrade back to GB, specifically to the .42 build. My phone came with .62 out of the box. .42 since I was going to root, then do an OTA update to .62. There. A happy, rooted GB phone. Now, I have everything needed to flash it. Tried flashing it to GB .42 but alas. here is my log:
13/041/2012 00:41:47 - INFO - <- This level is successfully initialized
13/041/2012 00:41:47 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
13/041/2012 00:41:47 - INFO - You can drag and drop ftf files here to start flashing them
13/041/2012 00:41:54 - INFO - Device connected with USB debugging on
13/041/2012 00:41:54 - INFO - Connected device : ST18
13/041/2012 00:41:54 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
13/041/2012 00:41:54 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
13/042/2012 00:42:12 - INFO - Selected Xperia Ray (ST18i)_4.0.2.A.0.42_CE.ftf
13/042/2012 00:42:12 - INFO - Preparing files for flashing
13/042/2012 00:42:33 - INFO - Please connect your device into flashmode.
13/042/2012 00:42:39 - INFO - Device disconnected
13/043/2012 00:43:19 - INFO - Opening device for R/W
13/043/2012 00:43:20 - INFO - Start Flashing
13/043/2012 00:43:20 - INFO - Processing loader
13/043/2012 00:43:20 - ERROR - Drivers need to be installed for connected device.
13/043/2012 00:43:20 - ERROR - You can find them in the drivers folder of Flashtool.
13/043/2012 00:43:20 - INFO - Checking header
13/043/2012 00:43:20 - INFO - Ending flash session
13/043/2012 00:43:20 - ERROR -
13/043/2012 00:43:20 - ERROR - Error flashing. Aborted
13/043/2012 00:43:21 - INFO - Device connected in flash mode
13/044/2012 00:44:02 - INFO - Device disconnected
13/044/2012 00:44:21 - INFO - Device connected with USB debugging off
13/044/2012 00:44:21 - INFO - For 2011 devices line, be sure you are not in MTP mode
13/044/2012 00:44:37 - INFO - Device disconnected
13/044/2012 00:44:46 - INFO - Device connected in flash mode
13/044/2012 00:44:54 - INFO - Selected Xperia Ray (ST18i)_4.0.2.A.0.42_CE.ftf
13/044/2012 00:44:54 - INFO - Preparing files for flashing
13/045/2012 00:45:06 - INFO - Please connect your device into flashmode.
13/045/2012 00:45:08 - INFO - Opening device for R/W
13/045/2012 00:45:08 - INFO - Reading device information
13/045/2012 00:45:26 - INFO - Unable to read from phone after having opened it.
13/045/2012 00:45:26 - INFO - trying to continue anyway
13/045/2012 00:45:26 - INFO - Start Flashing
13/045/2012 00:45:26 - INFO - Processing loader
13/045/2012 00:45:26 - INFO - Checking header
13/045/2012 00:45:26 - INFO - Ending flash session
13/045/2012 00:45:26 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
13/045/2012 00:45:26 - ERROR - Error flashing. Aborted
13/045/2012 00:45:26 - INFO - Device disconnected
13/045/2012 00:45:43 - INFO - Device connected with USB debugging off
13/045/2012 00:45:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
13/045/2012 00:45:53 - INFO - Device disconnected
Please. I'd rather not go to the Service Center. They'd ask questions and make me feel uncomfortable. My dad is not in station. Mom can't take me out she's not well. I'd rather try to fix all this mess myself. Help me.
Androman117 said:
I guess I have to go to the service center after all. Let's give this one last shot though.
Please. I'd rather not go to the Service Center. They'd ask questions and make me feel uncomfortable. My dad is not in station. Mom can't take me out she's not well. I'd rather try to fix all this mess myself. Help me.
Click to expand...
Click to collapse
According to the log it looks like you have connected phone before selecting the ftf, right? Select the ftf first and only after the popup appears, now hold volume up and while holding volume up connect phone with usb to pc!
Some users had problems, because they connected their phones too early...
mihahn said:
According to the log it looks like you have connected phone before selecting the ftf, right? Select the ftf first and only after the popup appears, now hold volume up and while holding volume up connect phone with usb to pc!
Some users had problems, because they connected their phones too early...
Click to expand...
Click to collapse
OH MY GOD OH MY GOD OH MY GOD DANKE MAY GOD BLESS YOU AND YOUR FAMILY THANK YOU SO MUCH! :good: :victory::laugh::highfive:
Also thanks to all others who replied. It's funny how such a small thing could cause problems. Thank you sir. I shall never forget you and your kindness.
Androman117 said:
OH MY GOD OH MY GOD OH MY GOD DANKE MAY GOD BLESS YOU AND YOUR FAMILY THANK YOU SO MUCH! :good: :victory::laugh::highfive:
Also thanks to all others who replied. It's funny how such a small thing could cause problems. Thank you sir. I shall never forget you and your kindness.
Click to expand...
Click to collapse
No problem mate! Any more questions just ask :good:
I hope everything works again!
I "accidently" wiped my entire phone (dalvik,system,cache,data,internal) in twrp recovery because i was stuck in a bootloop and installed envi-rom 0.2B and the phone was able to boot normally and get the phone working again.
After getting my phone to turn on and working again i wasn't able to use flashtool and it looks like this:
05/041/2014 14:41:04 - INFO - Device connected with USB debugging on
05/041/2014 14:41:05 - INFO - Connected device : Sony Xperia Z2
05/041/2014 14:41:05 - INFO - Installed version of busybox : BusyBox v1.22.1-Stericson (2014-01-25 17:27:18 CET) multi-call binary.
05/041/2014 14:41:05 - INFO - Android version : 4.4.2 / kernel version : 3.4.0-perf-gef0bdc3 / Build number : 17.1.1.A.0.402
05/041/2014 14:41:05 - INFO - Checking root access
05/041/2014 14:41:05 - INFO - Root Access Allowed
05/041/2014 14:41:23 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 17.1.2.A.0.314. Customization : Generic Thailand
05/041/2014 14:41:23 - INFO - Preparing files for flashing
05/041/2014 14:41:24 - INFO - Please connect your device into flashmode.
05/041/2014 14:41:34 - INFO - Device disconnected
05/041/2014 14:41:59 - INFO - Device connected with USB debugging off
05/041/2014 14:41:59 - INFO - For 2011 devices line, be sure you are not in MTP mode
05/042/2014 14:42:11 - INFO - Flash canceled
LED blinks red,green, then turns off and flashtool doesn't detect it all.
Afterwards i need to use the power button and volume up key to turn off the phone and reboot.
I also tried via sony pc companion and the phone update itself to update and get 17.1.2.A.0.314 but that didn't work either.
Occasionally flashtool gets stuck on installftkit:
05/010/2014 14:10:37 - INFO - Checking root access
05/010/2014 14:10:43 - INFO - Root Access Allowed
05/010/2014 14:10:43 - INFO - Installing toolbox to device...
05/010/2014 14:10:43 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
05/010/2014 14:10:44 - INFO - Running installftkit as root thru sysrun
So i can't update by flashing, pc companion, or via phone. It would also work if anyone knows how i can update without flashing.
-Sorry for long post, just wanted to provide some background info.
Im having a similar issue!
Except i cant even boot up my phone, it shows sony logo, then goes to the boot animation sound but the screen is black.
I need to get my phone into flashmode for pcompanion to repair it, but when i try to, the led flashed red, green and off, very quickly.
Please can someone help? I can't use my new phone
ChrisRoxor said:
Please can someone help? I can't use my new phone
Click to expand...
Click to collapse
Connect Phone & PC and press the Volume Down button (see LEDs blink, then let go)
tonypro79 said:
Connect Phone & PC and press the Volume Down button (see LEDs blink, then let go)
Click to expand...
Click to collapse
According to the pc companion it should stay green and also it doesn't notice the phone connected at all :/
Yeah pressed those buttons and tried the options i found on other threads (re-installing drivers, using different pc, etc.) still nothing. I don't have the original wire that came with the phone but i doubt that has an impact.
It's the same with me
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
JackHanAnLG said:
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
The problem i have is the computer doesnt notice the phone when its in flashmode. It just keeps saying 'Connect device'
JackHanAnLG said:
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry i don't think you noticed it was on in my post:
"05/041/2014 14:41:04 - INFO - Device connected with USB debugging on"
But yeah, apparently usb debugging turns off or something of the sort?
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2635830
Have You installed the flashtool drivers????
erdemc said:
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2635830
Have You installed the flashtool drivers????
Click to expand...
Click to collapse
Yeah from there and from the flashtool set already and it didn't work either time.
Has anyone found a fix to this yet?
I still can't flash my phone or update the software.
Dude if your rooting do it on the new root tool I did it and now I'm rooted
Sent from my D6503 using XDA Free mobile app
That's not the issue, I'm already on rooted unlocked bootloader. My problem is I can't update through phone, pc, or flashtool.
If it means anything the noise canceling isn't working anymore either so I think it might be that those original system files are gone. (for the noise canceling, flashing, and maybe other stock functions I haven't noticed)
Hope that helps anyone get an idea of the situation.
Any fix about this? I also have the same issue
Hi guys, So the problem im having at the minute is im trying to flash it back to a a lower firmware but for some reason on flash tools im getting:
15/020/2015 11:20:36 - INFO - Device disconnected
15/020/2015 11:20:36 - INFO - Device connected with USB debugging on
15/020/2015 11:20:36 - ERROR - Cannot identify your device.
15/020/2015 11:20:36 - INFO - Selecting from user input
15/021/2015 11:21:48 - ERROR - You can only flash devices.
Ive actually installed EVERY single driver on the drivers list as I tried the Xperia Z2 drivers to begin with and they didnt work
Am I right in thinking that I can just choose the Z2 from the list that comes up or does flashtool have to actually recognize it?
Ive gone on to USB Connectivity and the only 2 options that I have are MTP and MSC, Ive enabled USB Debugging and allowed my Computer access, But it still wont work, Can anyone help me please?
Thanks.