Related
My kernel is the stock version. Basebands and all other requirements have been met. I have rooted my x10MP with Flashtool and unlocked Bootloader. I have also installed CWM. I do not have xRecovery installed as I assume one recovery program would be sufficient.
According to MiniCM7Prov21's thread, all requirements have been met. However, when I try to "install zip from sd" in CWM's menu, it always returns a message saying "Installation failed".
This was the same for CyanoCream's ROM.
Could someone help me out please? I've tried reading through the other threads but it seems no one had such problems.
The steps I followed were from the following threads:
http://forum.xda-developers.com/showthread.php?t=1553036
http://forum.xda-developers.com/showthread.php?t=1201116
http://forum.xda-developers.com/showthread.php?t=1333234
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Greatly appreciated.
As far as I know, both use xRecovery (a 1 year old recovery). I suggest you to install nAa's kernel and install or MiniCM7 2.2.0 or CyanogenMod9 v02.
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Felimenta97 said:
As far as I know, both use xRecovery (a 1 year old recovery). I suggest you to install nAa's kernel and install or MiniCM7 2.2.0 or CyanogenMod9 v02.
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Click to expand...
Click to collapse
so I would need both CWM and xRecovery on my phone in order to be able to install either miniCM, CyanoCream or any of the mods that you mentioned above?
Hmms might be worth a try then.
Thank you.
Will post back here whether it works or not.
swb90 said:
so I would need both CWM and xRecovery on my phone in order to be able to install either miniCM, CyanoCream or any of the mods that you mentioned above?
Hmms might be worth a try then.
Thank you.
Will post back here whether it works or not.
Click to expand...
Click to collapse
No, no need for both. xRecovery is old. No one uses it anymore.
Just flash nAa's kernel (there is a lot of guides out there), boot in CWM, flash either Mini CM7 2.2.0 (Android 2.3.7) or CyanogenMod9 v02 (Android 4.0.3) and be happy.
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Felimenta97 said:
No, no need for both. xRecovery is old. No one uses it anymore.
Just flash nAa's kernel (there is a lot of guides out there), boot in CWM, flash either Mini CM7 2.2.0 (Android 2.3.7) or CyanogenMod9 v02 (Android 4.0.3) and be happy.
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Click to expand...
Click to collapse
ah~...so these 2 are the most popular and stable ROMs then?
Thanks =) will redo the process starting from flashing of kernel then =)
just to verify, the 2 ROMs you suggested are
http://forum.xda-developers.com/showthread.php?t=1415026
and
http://forum.xda-developers.com/showthread.php?t=1365683
right?
swb90 said:
ah~...so these 2 are the most popular and stable ROMs then?
Thanks =) will redo the process starting from flashing of kernel then =)
just to verify, the 2 ROMs you suggested are
http://forum.xda-developers.com/showthread.php?t=1415026
and
http://forum.xda-developers.com/showthread.php?t=1365683
right?
Click to expand...
Click to collapse
The first one is, with sure, the more stable. I recommend the second only if you want a really tasty Ice Cream Sandwish phone. It isn't the MOST stable, but it's more stable than a lot of other ROMs.
Good luck and give us a feedback if everything went well and if you liked.
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Felimenta97 said:
The first one is, with sure, the more stable. I recommend the second only if you want a really tasty Ice Cream Sandwish phone. It isn't the MOST stable, but it's more stable than a lot of other ROMs.
Good luck and give us a feedback if everything went well and if you liked.
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Click to expand...
Click to collapse
Hi there! I've successfully installed MiniCM and it's working fine. Really like the new design. A little question though. As I need to time in Mandarin/Chinese from time to time, could you point me to any sources that can help me install a Chinese/Mandarin keyboard in addition to the default Android keyboard?
There's a little problem though. Whenever I miss a call, the phone will play a song along with the notification. However, this song isn't set as my notification tone. In fact, it is just one of the songs in my music library. Is there any way to work around this?
swb90 said:
Hi there! I've successfully installed MiniCM and it's working fine. Really like the new design. A little question though. As I need to time in Mandarin/Chinese from time to time, could you point me to any sources that can help me install a Chinese/Mandarin keyboard in addition to the default Android keyboard?
There's a little problem though. Whenever I miss a call, the phone will play a song along with the notification. However, this song isn't set as my notification tone. In fact, it is just one of the songs in my music library. Is there any way to work around this?
Click to expand...
Click to collapse
Here my knowledge stops... I don't know... Happy you liked it. Remember to install some themes (ICS, Xperia S, etc).
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Felimenta97 said:
Here my knowledge stops... I don't know... Happy you liked it. Remember to install some themes (ICS, Xperia S, etc).
Sent from Xperia X10 Mini Pro using ICS by paul-xxx
Click to expand...
Click to collapse
Heh Heh~ you've been of much help though. Thank you very much.
I've decided to search around the market for some chinese input apps. May try to pull out the stock chineseinput apk from my mum's X10 Mini when she's back ^^
As for the ringtones...I've managed to find a workaround, albeit a little troublesome but no worries.
once again thank you very much =)
swb90 said:
Heh Heh~ you've been of much help though. Thank you very much.
I've decided to search around the market for some chinese input apps. May try to pull out the stock chineseinput apk from my mum's X10 Mini when she's back ^^
As for the ringtones...I've managed to find a workaround, albeit a little troublesome but no worries.
once again thank you very much =)
Click to expand...
Click to collapse
NO problem. Anything I can help, just ask me
[Q] What is Diffident between MIUI ROM and Other ROM (CM9 CM10) ?
Sorry for my noob question, but i really confuse .
Thanks...
kbit013 said:
[Q] What is Diffident between MIUI ROM and Other ROM (CM9 CM10) ?
Sorry for my noob question, but i really confuse .
Thanks...
Click to expand...
Click to collapse
CM9 and CM10 look and work like original android. (ICS and JB respectively)
MIUI rewrote just about the entire user-interface and several of the standard apps to give a different user-experience, but MIUI itself is built on top of Android.
If you've tried CM9 or 10, then there's no harm in trying out a MIUI rom either and see how you like it.
If you make a backup in CWM first you have your phone back working like it is now by just doing a restore.
MIUI v4 ROMS are based on ICS so you use them with the nAa ICS kernel.
SmG67 said:
CM9 and CM10 look and work like original android. (ICS and JB respectively)
MIUI rewrote just about the entire user-interface and several of the standard apps to give a different user-experience, but MIUI itself is built on top of Android.
If you've tried CM9 or 10, then there's no harm in trying out a MIUI rom either and see how you like it.
If you make a backup in CWM first you have your phone back working like it is now by just doing a restore.
MIUI v4 ROMS are based on ICS so you use them with the nAa ICS kernel.
Click to expand...
Click to collapse
Cool , thanks bro +1 for ur info i got it and understand .
Free time i'll try MIUI v4 ROM .
Good Luck
Hi Bro @SmG67, can u give me a link MIUI for U20i Good and already testing ?
Thanks.
kbit013 said:
Hi Bro @SmG67, can u give me a link MIUI for U20i Good and already testing ?
Thanks.
Click to expand...
Click to collapse
Try This by Resac, and read the follow-up posts too for some tips on MIUI specific stuff.
The first time you install MIUI it can take a long time to boot (up to 5 or more minutes) so be patient. Have fun
SmG67 said:
Try This by Resac, and read the follow-up posts too for some tips on MIUI specific stuff.
The first time you install MIUI it can take a long time to boot (up to 5 or more minutes) so be patient. Have fun
Click to expand...
Click to collapse
Thanks u so muh bro, +1 Trying.
MIUI Great looking i think n smooth,,,
Sent from my MT11i using xda premium
Yes thx bro, i already test it but it's all base with ICS. +1
Hello XDA,
I installed today a rom : /showthread.php?t=1689310
since than my menu bottons dont work anymore.
so i removed it and after that i installed the stock rom first again.
still no effect
after that i installed this rom:
/showthread.php?t=1465144
menu buttons still dont work.. how am i able to fix it?
Could find much on google, besides that i needed to instal stock rom. shame it didnt work T.T
Greets,
Mark
Tunestwo said:
Hello XDA,
I installed today a rom : /showthread.php?t=1689310
since than my menu bottons dont work anymore.
so i removed it and after that i installed the stock rom first again.
still no effect
after that i installed this rom:
/showthread.php?t=1465144
menu buttons still dont work.. how am i able to fix it?
Could find much on google, besides that i needed to instal stock rom. shame it didnt work T.T
Greets,
Mark
Click to expand...
Click to collapse
Did you install the correct version of the firmware for your device? If you have a physical home button you need to install the International version. If you have a capacitive home button you need to install the USA version.
Supermaster34 said:
Did you install the correct version of the firmware for your device? If you have a physical home button you need to install the International version. If you have a capacitive home button you need to install the USA version.
Click to expand...
Click to collapse
Hello,
I installed usa version... Fail xD
ty for the reply will search fro the int version now!:good: than i will try again !!!
Yes i installed the INT version and it worked <3!!! thank you!!!
Wich Rom do you recommend anyway?
Greets Mark!
Tunestwo said:
Hello,
I installed usa version... Fail xD
ty for the reply will search fro the int version now!:good: than i will try again !!!
Yes i installed the INT version and it worked <3!!! thank you!!!
Wich Rom do you recommend anyway?
Greets Mark!
Click to expand...
Click to collapse
Well I recommend my ROM, but you could say I'm a bit biased. GB ROMs are the only ROMs to have a working camera. Most ICS ROMs now support Bluetooth, but the JB ROM is pretty much for developers only at this stage because a lot of stuff is broken. Currently ICS ROMs are the best way to get stable-ish performance whilst getting loads of new features. Just take a look in the development forum for a RM that you like the look of
Sent from my Nexus 7 using XDA Premium HD app
Supermaster34 said:
Well I recommend my ROM, but you could say I'm a bit biased. GB ROMs are the only ROMs to have a working camera. Most ICS ROMs now support Bluetooth, but the JB ROM is pretty much for developers only at this stage because a lot of stuff is broken. Currently ICS ROMs are the best way to get stable-ish performance whilst getting loads of new features. Just take a look in the development forum for a RM that you like the look of
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Hello,
Thank you for your answer i will look for a ICS rom and and hope that Jb will be better soon!
My friend is asking me to root his phone, and install a custom rom, so I was wondering what do you guys recommend to install on his phone? Which rom is the most stable and best for every day use? I just need stability over speed.
mrdjibrilo said:
My friend is asking me to root his phone, and install a custom rom, so I was wondering what do you guys recommend to install on his phone? Which rom is the most stable and best for every day use? I just need stability over speed.
Click to expand...
Click to collapse
For now it's gingersony v06, you just need to flash a led fix ( only bug ) but the rest is fast and stable, it just has the problem that every rom has: getting stuck in the keyboard when scrolling maximum up/down on the sym/smiles, you just need to be gentle in that part.
The most syable roms will be Zencefil and Semc Debrand when the new version is released, zencefil may have more battery time of all and semc will be the most stable with that scrolling problem fixed.
If i helped press thanks .
AW: [Q] What's the most stable rom for the X10MP?
I agree to Crazy Seed, Gingersony is the best for the moment, but if you don't want to go through the pain of unlocking the bootloader and flashing a new kernel, I would recommend SonyStyle by BPaul, or, infact, GingerDX pro.
PS: Here is a list of most ROMs for X10 mini pro, you can go through the lists there, too, if you want:
http://forum.xda-developers.com/showthread.php?t=1588192
Please press thanks if I helped .
I'm really sorry for the dumb question but could you post the link to gingersony v06 and is it even a rom for the x10 mini pro?
AW: [Q] What's the most stable rom for the X10MP?
mrdjibrilo said:
I'm really sorry for the dumb question but could you post the link to gingersony v06 and is it even a rom for the x10 mini pro?
Click to expand...
Click to collapse
Yes, Gingersony is for X10 mini pro.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=1937993
And, bro, there are no dumb questions, we're all here to learn .
Please press thanks if I helped .
Kilroy. said:
Yes, Gingersony is for X10 mini pro.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=1937993
And, bro, there are no dumb questions, we're all here to learn .
Please press thanks if I helped .
Click to expand...
Click to collapse
Thanks And what are your thoughts on CM10 for the X10MP? Is it usable at all?
AW: [Q] What's the most stable rom for the X10MP?
mrdjibrilo said:
Thanks And what are your thoughts on CM10 for the X10MP? Is it usable at all?
Click to expand...
Click to collapse
Well, that is a good question: I'm a 'wannabe' dev myself, so I made a rom based on slimroms, which is based on minicm10. I solved the problem of too little space on the data partition, but the performance is still not comparable to cm7 and the sound isn't very good. Everything is working, just a bit slower than on cm7. Do you maybe want to test the rom?
Sent from my mimmi using xda app-developers app
Kilroy. said:
Well, that is a good question: I'm a 'wannabe' dev myself, so I made a rom based on slimroms, which is based on minicm10. I solved the problem of too little space on the data partition, but the performance is still not comparable to cm7 and the sound isn't very good. Everything is working, just a bit slower than on cm7. Do you maybe want to test the rom?
Sent from my mimmi using xda app-developers app
Click to expand...
Click to collapse
Wow, the first time I hear that project butter is slower then the 2.3.7 version Not really since it's not my phone. I own a Huawei G300 with CM10.1 on it and I can't believe that CM7 works better then CM10 on any device...
mrdjibrilo said:
Wow, the first time I hear that project butter is slower then the 2.3.7 version Not really since it's not my phone. I own a Huawei G300 with CM10.1 on it and I can't believe that CM7 works better then CM10 on any device...
Click to expand...
Click to collapse
You know, the problem is the hardware of our phone: There´s to little internal space and to little RAM, so we can´t really use the, compared with cm7, heavyweight cm10 to its full extent, ask Crazy Seed if you don´t believe me, he tested the ROM for me .
Kilroy. said:
You know, the problem is the hardware of our phone: There´s to little internal space and to little RAM, so we can´t really use the, compared with cm7, heavyweight cm10 to its full extent, ask Crazy Seed if you don´t believe me, he tested the ROM for me .
Click to expand...
Click to collapse
I believe you, but damn, such a waste, you're missing out on a whole new experience. Anyway thanks for all the answers, I guess I'll install the CM7!
Yes it's true, cm7 is the best rom for the mini pro and cm10 is simply too much heavy for out phone, i honestly don't think there will ever be a 100% stable fast cm10 for this phone because the hardware can't take it. Kilroy's cm10 rom it's true that has more space, and it's still in constant testing for perfecting the rom, there's still a long way to go but in time there will be solutions. I don't know why so many people want JB roms instead of GB roms, i tested both and the only difference i saw was that the cm7 performance was way too much better, but it goes with the tastes and choices of people.
Ps: sorry kilroy but i have to disagree about the other roms you mentioned, sonystyle has many bugs and lags and gingerdx has a radio bug and effect rendering not automatic at boot, but xperia blaze 3 rom is good for stock kernel and has walkman player ( i just don't like the srs trumedia that they put in the rom, best to remove it ), or else you just have to go trough the pain of unlocking bootloader and stuff to get Gingersony v06 the best rom for now.
Ps: Kilroy about jb players, now that i mentioned walkman player, why don't you try that one? xD.
Minicm7. its fast, very stable and excellent for everyday use. battery life is good. i have not had any major problems with it. Its awesome!
as been said before in this post, and also my opinion, GingerSony is now the best rom around for x10mini pro
Hi all, As I said, here comes the first version of android 4.3 for the x10. This is based on the evervolv ROM.
The binaries can be found in evervolv 4.3 folder.
https://www.wuala.com/CMX10-Releases/?key=CMX10Team
BUGS
NO CWM delivered with kernel
NO CHARGEMON
The WLOD that because famous with android 4.3
Maybe a lot more.
Install
Copy ROM on your SD card.
Wipe Data and Cache
Get into CWM and install ROM.
Flash the kernel.ftf using flashtool
This is an early version, I might not have time to work on it a lot. If someone wants the sources before their released, PM me.
Scritch
PS: Forgot the little disclaimer.
No warranty about this. I can't be blamed if somethings goes wrong or if phone is damaged. Use at your own risk.
Hi
Nice to see You again on X10 forum. I always liked you ROM. I hope this will be good too. Now downloading and check how it works
Great... what kernel version is used?
FeraVolt said:
Great... what kernel version is used?
Click to expand...
Click to collapse
Unfortunately still the old 2.6.29.
Good job! But unfortunately we won't be able to achieve the smoothness we want if we can't get out of kernel 2.6.29.
Great job and nice to see you back
Sent from my XT890 using xda app-developers app
Tof37 said:
Great job and nice to see you back
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Hey).. Have you got my email regarding kernel?
I wish i had x10 and newer pc.. on my one core 1.6Ghz netbook i cant do much...
thank you all
FeraVolt said:
Hey).. Have you got my email regarding kernel?
I wish i had x10 and newer pc.. on my one core 1.6Ghz netbook i cant do much...
thank you all
Click to expand...
Click to collapse
Hey
Yes I got it... "just" have problems with display drivers... As scritch released his 4.4.3, I will work harder to make the kernel working... hopfully 4.4.3 bugs would be solved with it...
Sent from my XT890 using xda app-developers app
OMG!!! FeraVolt, Scritch007 & Tof37 are back together again! This is gonna be awesome!!!
you are the watchman of X10 my friend welcome back :highfive:
Thanks a scritch007 You're the Best
I am still using gingerbread developed by Feralab, I really want to use ice cream or jelly bean but there is no compete rom but the version is keep on releasing I don't understand it , then why there is no 3.x kernel developed is it impossible for our phone? Thanks for the people work hard to make us happy
Sent from my X10 using xda app-developers app
sudersanmurthy said:
I am still using gingerbread developed by Feralab, I really want to use ice cream or jelly bean but there is no compete rom but the version is keep on releasing I don't understand it , then why there is no 3.x kernel developed is it impossible for our phone? Thanks for the people work hard to make us happy
Sent from my X10 using xda app-developers app
Click to expand...
Click to collapse
There's some pretty cool version of JB. The CM10 now has every thing except hardware video encoding/decoding. Everything else is working nicely.
CM10.1 and Everolv 4.2 and 4.3 have an issue with the kernel. But I can't manage to fix it. So we've been working on newer kernel, 2.6.32 but it has a camera issue. And we're trying to port a newer kernel, but it's not that easy.
scritch007 said:
There's some pretty cool version of JB. The CM10 now has every thing except hardware video encoding/decoding. Everything else is working nicely.
CM10.1 and Everolv 4.2 and 4.3 have an issue with the kernel. But I can't manage to fix it. So we've been working on newer kernel, 2.6.32 but it has a camera issue. And we're trying to port a newer kernel, but it's not that easy.
Click to expand...
Click to collapse
I understand its very hard and you guys giving up your free time for this , i dont posses the knowledge so just wanted to know why version keeps moving on when latter is not finished yet thank you so much for you reply and ill try to be patient and support you guys :good:
I agree.. I was on the ICS version from FXP but when i recently switched back to Feravolt's GB, it was a lot more smoother and fast.. !!
people let us be fear .....to the fact that our phone is so old......and those ...guys has make the imposable daily usable tangible fact the>>>>>>>>> latest (4.3)
man this rock in it self let us give the credit for that >>>>>>>>>>>.thanks you all brother developer :highfive::highfive::highfive::highfive:
Superb
Wow... Superb...
Thanks guys, thanks for all your hard work in bringing 4.2 and (now) 4.3 version to our great x10 phone. I am using this phone from 2.5 years and used stock 1.6, 2.1, 2.3 and custom ROMs of Fera, Zahid5h, Scritch, Vasishta, Walker all 2.3, 4.1 and now 4.2.2 ROMs... It's been a great experience with this phone and with great ROMs by great Developers... Thanks a lot guys from all X10 users.
I really hope and wish this 4.3 ROM to be successfull and you people can able to get Linux 3.x kernel working for us..:good::good:
THANKS
:good::good::good:
Test day ;p
I installed this ROM yesterday. First thing - GPS work fine - dont know why you wrote on OP "NO GPS"?
ROM is fast and good - only problem is with WLOD usualy when first start some apps or doing something too fast ;p
Soplica said:
I installed this ROM yesterday. First thing - GPS work fine - dont know why you wrote on OP "NO GPS"?
ROM is fast and good - only problem is with WLOD usualy when first start some apps or doing something too fast ;p
Click to expand...
Click to collapse
Thanks for feedback.
I wrote, no GPS because I didn't find the icon to disable the GPS. But if you say it work's I'll update first page then .
Yeah WLOD, like for the 4.2.2, it's a shame, otherwise I like the Rom.
scritch007 said:
Thanks for feedback.
I wrote, no GPS because I didn't find the icon to disable the GPS. But if you say it work's I'll update first page then .
Yeah WLOD, like for the 4.2.2, it's a shame, otherwise I like the Rom.
Click to expand...
Click to collapse
Yeah, only place when You change something with GPS options is "Location access" in "Personal"
Some other options i cant find - for example i cant change icns on status bar - wifi, sync or something else - i dont know chow too change it ;p
But ROM can be nice in the future i like it too in alpha stage its better then other in beta ;p
One more thing - is it possible to restore USB charge or something like this to kernel? Becouse i read You remowe this options from source code and from 4.X kernel we cant use other then Sony charger - i have Philips charger for 2 phones but cant use it.