I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Whereis404 said:
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Click to expand...
Click to collapse
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
jaidev.s said:
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
Click to expand...
Click to collapse
Unless download mode isn't VDown + Home + Power
d4fseeker said:
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Whereis404 said:
Unless download mode isn't VDown + Home + Power
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Click to expand...
Click to collapse
100% see sticky top of the page .
jje
Related
Need Help here. i tried to factory reset with odin and suddenly i got bootloop so i tried to flash with existing rom that ive used once. but it keeps gives me fail message. tried to flash cwm also but still fail on me. tried new usb stock cable still the same.
here are the log message in odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I cant use Kies to restore because i dont know the code.
i cant enter recovery
i dont know how to fix this thing.
ive read in some forum that my NAND might be corrupted..
please help
ive read in some forum that my NAND might be corrupted..
thats how it reads to me .
jje
yes it thought so. im trying to repartition the pit but it too so longg.. seems not working
Try flashing a 3 part stock ics Rom with pit file, let me know if this works please
Had the same problem tried everything posted in here and could't recover it now waiting on warranty replacement, seems this is way more common than I thought.
bligui said:
Had the same problem tried everything posted in here and could't recover it now waiting on warranty replacement, seems this is way more common than I thought.
Click to expand...
Click to collapse
Yes sorry - but pit error problem is related to faulty nand/emmc :crying:
re flashing dont make any difference at all
i sent my SGS3 to the Samsung Service Center. they tried to flash it but no luck so they asked me to leave the unit and replace the mainboard... waiting for it..
ive tried all pit, repartition, etc2.. i gave up
It seems I am not the only one....
Except take it to the health center (Samsung service center), does anyone have luck to fix it by Odin?! becuase I was using custom rom. I just think the Samsung might do the warranty recover with charges, which I don't really want to pay.. many thanks guys.
Sent from my GT-N7000 using xda app-developers app
kk12175 said:
It seems I am not the only one....
Except take it to the health center (Samsung service center), does anyone have luck to fix it by Odin?! becuase I was using custom rom. I just think the Samsung might do the warranty recover with charges, which I don't really want to pay.. many thanks guys.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Got my phone back, they replaced the board. luckily its under full warranty. so i wont have to spent a cent...
jeffma said:
Got my phone back, they replaced the board. luckily its under full warranty. so i wont have to spent a cent...
Click to expand...
Click to collapse
So was this covered under warranty? What did you say went wrong with the phone?
voipman2012 said:
So was this covered under warranty? What did you say went wrong with the phone?
Click to expand...
Click to collapse
I said its hang on the samsung logo. when i was trying to factory reset. just act ordinary user that doesnt know how to root :laugh::laugh:
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
JJoos said:
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
Click to expand...
Click to collapse
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Sun90 said:
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Click to expand...
Click to collapse
Yeah, should have been more awake when doing this, feeling stupid....
I heard that a usb jig might solve the problem.
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
pasanjay said:
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
Click to expand...
Click to collapse
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
boki9999 said:
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, he flashed the wrong pit file
Sent from my GT-I9100 using xda premium
I know.
The only way to fix this is Jtag.
Sent from my GT-I9100
Hello!
So I am about to go turn in my phone to the sprint store today and get the note 4. I am trying to downgrade to stock from the minium(sp?) Rom. I am trying to run this file N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar.md5 on AP in Odin. The error I am getting is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
I have been working on this for a few hours now and have scoured the internet. I have seen countless people with the same problem but I just can't figure it out. Any suggestions or questions you need answered should be pretty fast, I will be sitting at the computer for the next few hours working on this. Thanks everyone!
skelieman said:
I have been working on this for a few hours now and have scoured the internet. I have seen countless people with the same problem but I just can't figure it out. Any suggestions or questions you need answered should be pretty fast, I will be sitting at the computer for the next few hours working on this. Thanks everyone!
Click to expand...
Click to collapse
Hey Skelie,
What version of the bootloader are you currently on? Once you have upgraded to NAB or newer, you are not able to flash back down below that.
If the only thing you're trying to do is return you phone with a fully Stock ROM, I'd recommend either flashing the NC5 all-in-one restore by rwiclo or the NH7 restore that was uploaded by micmars. Either one should work flawlessly in ODIN v3.7 and you can get your new Note 4!
I hope this helps!
-Topher
Hello!
I'm attempting to root my S4 and eventually flash it with a custom ROM. However, I'm having a lot of trouble getting it to root. I'm using an online guide which flashes another kernel (NC5) using Odin then roots using towelroot and finally flashing back to my original kernel (NK1). The problem is that when I originally try to flash the NC5 kernel using Odin, I get an error. I've tried looking online for a solution but have found nothing so hopefully someone on here can assist me.
I'm running 4.4.2 on a SCH-I545VRUFNK1 and using Odin v3.09 but have also tried v3.04 to no avail. I've taken the battery out and waited 10 minutes, but that didn't work. Here is the output from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Thank you to all in advance!
Niotic said:
Hello!
I'm attempting to root my S4 and eventually flash it with a custom ROM. However, I'm having a lot of trouble getting it to root. I'm using an online guide which flashes another kernel (NC5) using Odin then roots using towelroot and finally flashing back to my original kernel (NK1). The problem is that when I originally try to flash the NC5 kernel using Odin, I get an error. I've tried looking online for a solution but have found nothing so hopefully someone on here can assist me.
I'm running 4.4.2 on a SCH-I545VRUFNK1 and using Odin v3.09 but have also tried v3.04 to no avail. I've taken the battery out and waited 10 minutes, but that didn't work. Here is the output from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Thank you to all in advance!
Click to expand...
Click to collapse
Have you tried using a different USB cable? Sometimes I have had this happen, I switched cables and it worked fine after, but this may not be your specific issue.
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
Also, are you using the Kernel or full image? Look at file size as the Kernel is fairly small compared.
Yea, I did try that! I tried it with two different cables and two different USB ports but didn't change anything unfortunately.
Niotic said:
Yea, I did try that! I tried it with two different cables and two different USB ports but didn't change anything unfortunately.
Click to expand...
Click to collapse
I would say maybe try another PC if available.
What if there isn't another pc available?
What is the file size of the image you are trying to flash?
Flash a stock nc5 image, then use towelroot. Odin may not be liking the image... Also, sometimes the phone has to be flat. That helps me A LOT in my constant Odin Flashes.
XxD34THxX said:
Flash a stock nc5 image, then use towelroot. Odin may not be liking the image... Also, sometimes the phone has to be flat. That helps me A LOT in my constant Odin Flashes.
Click to expand...
Click to collapse
Can't flash a stock image of NC5 as he is on NK1. He CAN flash the NC5 kernel, use towelroot to root, and then flash the NK1 kernel again.
I had this same problem. I am pretty sure I had the phone flat on my table instead of on my PC... That didn't help in your case... Use Odin 3.07
The file size is 8,691 KB. And this is exactly what I am trying to do! Flash the NK1 Kernel then use towel root then flash back to my original kernel of NC5. I'll try to use Odin 3.07 and let y'all know how it goes.
I apologize for the delayed response, it's the end of the school year and things are getting pretty hectic. Please be patient with me!
Niotic said:
The file size is 8,691 KB. And this is exactly what I am trying to do! Flash the NK1 Kernel then use towel root then flash back to my original kernel of NC5. I'll try to use Odin 3.07 and let y'all know how it goes.
I apologize for the delayed response, it's the end of the school year and things are getting pretty hectic. Please be patient with me!
Click to expand...
Click to collapse
Just tried Odin 3.07 with no luck, my phone is flat and I tried two different USB ports with two different chords. What's my next option?
Niotic said:
The file size is 8,691 KB. And this is exactly what I am trying to do! Flash the NK1 Kernel then use towel root then flash back to my original kernel of NC5. I'll try to use Odin 3.07 and let y'all know how it goes.
I apologize for the delayed response, it's the end of the school year and things are getting pretty hectic. Please be patient with me!
Click to expand...
Click to collapse
Its no problem man. I actually jump on XDA when I am at work, in between selling phones and monthly renewals. I recently had the same issue and changing my cable solved it for me.
Thanks for understanding! Yea I've tried two different cables as stated before but no luck. I'm starting to get the feeling this root isn't going to work -_-
Niotic said:
Thanks for understanding! Yea I've tried two different cables as stated before but no luck. I'm starting to get the feeling this root isn't going to work -_-
Click to expand...
Click to collapse
What, if you don't mind my asking, do you use root for?
Sent from my SCH-I545 using XDA Free mobile app
Well recently my battery life has been atrocious to say the least so I was hoping on using a root to improve that further controlling the resources that some apps use even while not in use. For example facebook is constantly pulling a massive amount of resources which I believe is partially related to my bad battery life.
I also am a bit obsessed with my UI and love changing it around in order to get better funtionality as well as increasing it's visual appel. I feel that touchwiz is ugly and would like to flash something over it in order to get rid of it and allow further customization of my UI.
Have you tried unchecking Auto Reboot in Odin options?
Another way, I've got this rooting problem on my Samsung E5:
...
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Luckily I found a thread in AndroidForums (I can't post the link here because of XDA's rules). Not totally the same but I think it could help. Belong to it, maybe your reactivation lock is on. Turn it off (Menu > Settings > General > Security > Reactivation lock, uncheck) and retry.
Thanks for the suggestion zhaona; unfortunately, it did not work. Does anyone else have some suggestions?
Hello, I am trying to flash stock 7.0 to my Sprint Galaxy S7 Edge. On the screen on my phone on download mode it says that the phone is model SM-G935A, but on the back of the phone it says it is SM-G935P, kind of strange if you ask me. Well the reason I am here is because I keep getting flashing errors with odin. I usually get some kind of "Fail (Auth!)" error or something like that and then the phone usually displays out a fused binary error. I have looked everywhere to find a solution and have not yet found one. The last attempt that I made to flash my phone to stock 7.0, I have the log of activity from the attempt here:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I got the correct firmware for the device, as you can see it does not say "device model mismatch" or anything like that, but I can never get a clean flash, it always has some error that I cannot find the solution to.
So if anyone could help me that would be awesome! I am kind of new to android, and especially to Odin, and I would like to learn more so that I don't run into these issues in the future!
Michaelkintner35 said:
Hello, I am trying to flash stock 7.0 to my Sprint Galaxy S7 Edge. On the screen on my phone on download mode it says that the phone is model SM-G935A, but on the back of the phone it says it is SM-G935P, kind of strange if you ask me...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3489011
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.