I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
JJoos said:
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
Click to expand...
Click to collapse
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Sun90 said:
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Click to expand...
Click to collapse
Yeah, should have been more awake when doing this, feeling stupid....
I heard that a usb jig might solve the problem.
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
pasanjay said:
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
Click to expand...
Click to collapse
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
boki9999 said:
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, he flashed the wrong pit file
Sent from my GT-I9100 using xda premium
I know.
The only way to fix this is Jtag.
Sent from my GT-I9100
Related
Hi, so i downloaded the version for my phone
GT-I9100_XEO_I9100XXKH3_I9100XXKH3_I9100OXAKH3.
I wiped factory/data reset, system something and dalvik cache.
I used odin to flash ticking only the PDA,
but it stuck for like 1 hour on this stage:<ID:0/012> factoryfs.img
Both the loading bar on the phone and on odin are on the same level.
Here is the full Message:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img
<ID:0/012> factoryfs.img
Any help please??
99nirc99 said:
Hi, so i downloaded the version for my phone
GT-I9100_XEO_I9100XXKH3_I9100XXKH3_I9100OXAKH3.
I wiped factory/data reset, system something and dalvik cache.
I used odin to flash ticking only the PDA,
but it stuck for like 1 hour on this stage:<ID:0/012> factoryfs.img
Both the loading bar on the phone and on odin are on the same level.
Here is the full Message:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img
<ID:0/012> factoryfs.img
Any help please??
Click to expand...
Click to collapse
Did you by chance check repartition? If so I think you may be in trouble.
Nope, i checked like 4 times before i clicked start, and i can see it now,
I didnt ticked Repartition...
99nirc99 said:
Nope, i checked like 4 times before i clicked start, and i can see it now,
I didnt ticked Repartition...
Click to expand...
Click to collapse
Okay well there may be hope. Pull the battery and then use the button combo to see if you can get to download mode if you can then I suggest you restart your PC and make sure your using a UBS connection that is on the back of your PC, do not use any USB hubs or front usb connections. Also make sure kies in not running in the back round as it can interfere with the USB connections.
I made a backup with Cwk so i hope nothing will go wrong...
I pulled the battery, and i got to download mode, but odin doesnt seem
to recognize the phone...
Edit: i just noticed on processes, that kies Was running...
but Odin doesnt recognize the phone now...
Edit2: Odin managed to recognize the phone, so i started the process again...
but i got an error:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> factoryfs.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i try again?
99nirc99 said:
I made a backup with Cwk so i hope nothing will go wrong...
I pulled the battery, and i got to download mode, but odin doesnt seem
to recognize the phone...
Edit: i just noticed on processes, that kies Was running...
but Odin doesnt recognize the phone now...
Edit2: Odin managed to recognize the phone, so i started the process again...
but i got an error:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> factoryfs.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i try again?
Click to expand...
Click to collapse
Well as long as you can get to download mode there is hope. Maybe try a different firmware package.
Are you using the Samsung USB cable or the HTC one?
Successful!!
I just tried it again and it worked!
Thanks alot everyone, especially the one who told me to check
if kies was running
Hi, I been stuck on cache.img for hours (i left it overnight) kies isnt running in the background and i tried many times, im trying to flash XWKI4.
I came across this post and im using a HTC cable to connect, is this a problem??
Edit: Kies really messed up my phone it kept failing on firmware upgrade, asked me to do firmware emergency but that wasnt working either, eventually the firmware upgrade worked BUT the phone doesn't recognise my SIM card so i want to reflash in ODIN
saffad said:
Hi, I been stuck on cache.img for hours (i left it overnight) kies isnt running in the background and i tried many times, im trying to flash XWKI4.
30 mins max
I came across this post and im using a HTC cable to connect, is this a problem??
Probably is not the correct cable as per instructions
jje
Click to expand...
Click to collapse
hah yea had the same problem, its always dam kies gw gw
Tell me about it, kies is useless.
I tried another firmware but thats stuck on boot.bin right now, i have to travel 2hrs to get my samsung cable!! no idea what to do now..phone doesn't start (says do an emergency recovery). Thinking of going to service centre, i know I haven't void my warranty.
. Thinking of going to service centre, i know I haven't void my warranty.
ROOT = warranty void .Custom rom = void warranty
So if you have neither you are ok if not you need to flash stock rom to unroot and set rom counter to zero with USB jig .
jje
JJEgan said:
. Thinking of going to service centre, i know I haven't void my warranty.
ROOT = warranty void .Custom rom = void warranty
So if you have neither you are ok if not you need to flash stock rom to unroot and set rom counter to zero with USB jig .
jje
Click to expand...
Click to collapse
i never rooted and i never flashed a custom rom, i never even flashed a rom, just used kies to upgrade..so i think im ok
saffad said:
i never rooted and i never flashed a custom rom, i never even flashed a rom, just used kies to upgrade..so i think im ok
Click to expand...
Click to collapse
Yes you are ok .
Kies update broke phone well known service call .
jje
I have got stuck on DATAFS. Should I pull out the battery and give another try or ?
THX
THX A LOT Revived my SII!
****ty kies that sucks my sii wile upgrading fw...
THX ODIN and XDA
how much time it will take via oden i have single file putted in PDA box file is about 1.5 gb
asadnow2k said:
how much time it will take via oden i have single file putted in PDA box file is about 1.5 gb
Click to expand...
Click to collapse
5 - 10 mins to flash an entire firmware. Unless u flashed the wrong file...
"To err is human, to forgive is divine"
Sent from my SGS II
1.5 Gb pda file?
What the hell are you flashing there?
Sent from the little guy
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Whereis404 said:
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Click to expand...
Click to collapse
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
jaidev.s said:
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
Click to expand...
Click to collapse
Unless download mode isn't VDown + Home + Power
d4fseeker said:
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Whereis404 said:
Unless download mode isn't VDown + Home + Power
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Click to expand...
Click to collapse
100% see sticky top of the page .
jje
Need Help here. i tried to factory reset with odin and suddenly i got bootloop so i tried to flash with existing rom that ive used once. but it keeps gives me fail message. tried to flash cwm also but still fail on me. tried new usb stock cable still the same.
here are the log message in odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I cant use Kies to restore because i dont know the code.
i cant enter recovery
i dont know how to fix this thing.
ive read in some forum that my NAND might be corrupted..
please help
ive read in some forum that my NAND might be corrupted..
thats how it reads to me .
jje
yes it thought so. im trying to repartition the pit but it too so longg.. seems not working
Try flashing a 3 part stock ics Rom with pit file, let me know if this works please
Had the same problem tried everything posted in here and could't recover it now waiting on warranty replacement, seems this is way more common than I thought.
bligui said:
Had the same problem tried everything posted in here and could't recover it now waiting on warranty replacement, seems this is way more common than I thought.
Click to expand...
Click to collapse
Yes sorry - but pit error problem is related to faulty nand/emmc :crying:
re flashing dont make any difference at all
i sent my SGS3 to the Samsung Service Center. they tried to flash it but no luck so they asked me to leave the unit and replace the mainboard... waiting for it..
ive tried all pit, repartition, etc2.. i gave up
It seems I am not the only one....
Except take it to the health center (Samsung service center), does anyone have luck to fix it by Odin?! becuase I was using custom rom. I just think the Samsung might do the warranty recover with charges, which I don't really want to pay.. many thanks guys.
Sent from my GT-N7000 using xda app-developers app
kk12175 said:
It seems I am not the only one....
Except take it to the health center (Samsung service center), does anyone have luck to fix it by Odin?! becuase I was using custom rom. I just think the Samsung might do the warranty recover with charges, which I don't really want to pay.. many thanks guys.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Got my phone back, they replaced the board. luckily its under full warranty. so i wont have to spent a cent...
jeffma said:
Got my phone back, they replaced the board. luckily its under full warranty. so i wont have to spent a cent...
Click to expand...
Click to collapse
So was this covered under warranty? What did you say went wrong with the phone?
voipman2012 said:
So was this covered under warranty? What did you say went wrong with the phone?
Click to expand...
Click to collapse
I said its hang on the samsung logo. when i was trying to factory reset. just act ordinary user that doesnt know how to root :laugh::laugh:
Evening All,
This is most definitely a cry for help from someone not new to Flashing Phones. I have been flash ROMS sicne the days of my HTC Desire. I have never encountered an issue up until recently.
My S3 was running perfectly fine on Android Revolution 16.5. I generally always charge my phone at work and at home so I always have it on. Last night my battery died as I left my charger at my girlfriends. After popping around and picking it back up I charged my phone. It booted up to give me a System UID's inconsistent error for no reason.
I did some searching around and attempted to rectify this matter with the various Factory Resets, Fix Permissions etc. and as far as I got was that I would get to the Samsung Logo and then it would hang.
After much dicking around with ARHD I decided to flash Stock Firmware from Sammfirmware.com. I did this using the Unbranded Firmware and going back to what my Galaxy S3 started with.
GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5
This worked and I got safely back into my phone albeit with no signal/mobile network. I looked around and thought because my carrier is O2 I'll flash the O2 firmware. This didn't work so I went back to flashing the unbranded firmware again where I was on before I got this in ODIN:
<OSM> GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I now an issue because bootup is stating my firmware upgrade has failed, and now ODIN refuses to reflash the MD5 file again. I just keep getting the same failure message. I am able to reboot into Download Mode and that is it.
Is anyone able to offer me any kind of assistance please?
Mobile Phone: Samsung Galaxy SIII i9300
Carrier: O2
Regards,
James
Lynchie87 said:
Evening All,
This is most definitely a cry for help from someone not new to Flashing Phones. I have been flash ROMS sicne the days of my HTC Desire. I have never encountered an issue up until recently.
My S3 was running perfectly fine on Android Revolution 16.5. I generally always charge my phone at work and at home so I always have it on. Last night my battery died as I left my charger at my girlfriends. After popping around and picking it back up I charged my phone. It booted up to give me a System UID's inconsistent error for no reason.
I did some searching around and attempted to rectify this matter with the various Factory Resets, Fix Permissions etc. and as far as I got was that I would get to the Samsung Logo and then it would hang.
After much dicking around with ARHD I decided to flash Stock Firmware from Sammfirmware.com. I did this using the Unbranded Firmware and going back to what my Galaxy S3 started with.
GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5
This worked and I got safely back into my phone albeit with no signal/mobile network. I looked around and thought because my carrier is O2 I'll flash the O2 firmware. This didn't work so I went back to flashing the unbranded firmware again where I was on before I got this in ODIN:
<OSM> GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I now an issue because bootup is stating my firmware upgrade has failed, and now ODIN refuses to reflash the MD5 file again. I just keep getting the same failure message. I am able to reboot into Download Mode and that is it.
Is anyone able to offer me any kind of assistance please?
Mobile Phone: Samsung Galaxy SIII i9300
Carrier: O2
Regards,
James
Click to expand...
Click to collapse
ODIN has now told me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Guess its game over now then?
user flashed wrong file and damaged wiped pit . Or used wrong PIT or ticked repartition etc etc .
You need to flash the correct PIT file see multiple identical posts .
may help.
http://forum.xda-developers.com/showthread.php?t=1796062
JJEgan said:
user flashed wrong file and damaged wiped pit . Or used wrong PIT or ticked repartition etc etc .
You need to flash the correct PIT file see multiple identical posts .
may help.
http://forum.xda-developers.com/showthread.php?t=1796062
Click to expand...
Click to collapse
Hi,
Thanks but I can't even Flash the PIT File :
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
If its not the correct PIT file it will fail .
Looks a service centre job now .
jje
JJEgan said:
If its not the correct PIT file it will fail .
Looks a service centre job now .
jje
Click to expand...
Click to collapse
Well any suggestions on how to obtain the correct PIT file then?
Ta.
Lynchie87 said:
Well any suggestions on how to obtain the correct PIT file then?
Ta.
Click to expand...
Click to collapse
sammobile
.com
jje
Lynchie87 said:
Evening All,
This is most definitely a cry for help from someone not new to Flashing Phones. I have been flash ROMS sicne the days of my HTC Desire. I have never encountered an issue up until recently.
My S3 was running perfectly fine on Android Revolution 16.5. I generally always charge my phone at work and at home so I always have it on. Last night my battery died as I left my charger at my girlfriends. After popping around and picking it back up I charged my phone. It booted up to give me a System UID's inconsistent error for no reason.
I did some searching around and attempted to rectify this matter with the various Factory Resets, Fix Permissions etc. and as far as I got was that I would get to the Samsung Logo and then it would hang.
After much dicking around with ARHD I decided to flash Stock Firmware from Sammfirmware.com. I did this using the Unbranded Firmware and going back to what my Galaxy S3 started with.
GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5
This worked and I got safely back into my phone albeit with no signal/mobile network. I looked around and thought because my carrier is O2 I'll flash the O2 firmware. This didn't work so I went back to flashing the unbranded firmware again where I was on before I got this in ODIN:
<OSM> GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I now an issue because bootup is stating my firmware upgrade has failed, and now ODIN refuses to reflash the MD5 file again. I just keep getting the same failure message. I am able to reboot into Download Mode and that is it.
Is anyone able to offer me any kind of assistance please?
Mobile Phone: Samsung Galaxy SIII i9300
Carrier: O2
Regards,
James
Click to expand...
Click to collapse
u should flash firmware using multiple files... lyk bootloader, csc, pda.. etc..
for creating odin ready pack, search for splitfus in google..
Sent from my GT-S5360 using xda app-developers app
Hello guys, this is my first post. I was subscribed to this website for some time. But I was always able to solve my issues just by searching the forums here without having to post my own thread. However, I have been looking for the "PIT" file for my Samsung Galaxy Light SGH-T399N with no luck. My phone was stuck on the MetroPCS logo screen. So, I have not been able to flash the phone via Odin because this file is missing. I can not even go into recovery mode. I was wondering if you guys could helped me. I appreciate your help in advance!
This is what I am getting from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Anybody? I have read a lot about this and the PIT file is what I need to solve my problem.
This is what I am getting from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Anybody?
I need this file please guys... Anybody?
I thought that this was an easy one.
I actually found the file myself. Here is the file in case somebody else needs it: http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)
Kudos
GalaxyVibe said:
I actually found the file myself. Here is the file in case somebody else needs it: http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)
Click to expand...
Click to collapse
Seek and You Shall Find is truly a Universal Truth
Hopefully this will help me flash my sis's phone FINALLY :highfive: