Hi, so i downloaded the version for my phone
GT-I9100_XEO_I9100XXKH3_I9100XXKH3_I9100OXAKH3.
I wiped factory/data reset, system something and dalvik cache.
I used odin to flash ticking only the PDA,
but it stuck for like 1 hour on this stage:<ID:0/012> factoryfs.img
Both the loading bar on the phone and on odin are on the same level.
Here is the full Message:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img
<ID:0/012> factoryfs.img
Any help please??
99nirc99 said:
Hi, so i downloaded the version for my phone
GT-I9100_XEO_I9100XXKH3_I9100XXKH3_I9100OXAKH3.
I wiped factory/data reset, system something and dalvik cache.
I used odin to flash ticking only the PDA,
but it stuck for like 1 hour on this stage:<ID:0/012> factoryfs.img
Both the loading bar on the phone and on odin are on the same level.
Here is the full Message:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img
<ID:0/012> factoryfs.img
Any help please??
Click to expand...
Click to collapse
Did you by chance check repartition? If so I think you may be in trouble.
Nope, i checked like 4 times before i clicked start, and i can see it now,
I didnt ticked Repartition...
99nirc99 said:
Nope, i checked like 4 times before i clicked start, and i can see it now,
I didnt ticked Repartition...
Click to expand...
Click to collapse
Okay well there may be hope. Pull the battery and then use the button combo to see if you can get to download mode if you can then I suggest you restart your PC and make sure your using a UBS connection that is on the back of your PC, do not use any USB hubs or front usb connections. Also make sure kies in not running in the back round as it can interfere with the USB connections.
I made a backup with Cwk so i hope nothing will go wrong...
I pulled the battery, and i got to download mode, but odin doesnt seem
to recognize the phone...
Edit: i just noticed on processes, that kies Was running...
but Odin doesnt recognize the phone now...
Edit2: Odin managed to recognize the phone, so i started the process again...
but i got an error:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> factoryfs.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i try again?
99nirc99 said:
I made a backup with Cwk so i hope nothing will go wrong...
I pulled the battery, and i got to download mode, but odin doesnt seem
to recognize the phone...
Edit: i just noticed on processes, that kies Was running...
but Odin doesnt recognize the phone now...
Edit2: Odin managed to recognize the phone, so i started the process again...
but i got an error:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> factoryfs.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i try again?
Click to expand...
Click to collapse
Well as long as you can get to download mode there is hope. Maybe try a different firmware package.
Are you using the Samsung USB cable or the HTC one?
Successful!!
I just tried it again and it worked!
Thanks alot everyone, especially the one who told me to check
if kies was running
Hi, I been stuck on cache.img for hours (i left it overnight) kies isnt running in the background and i tried many times, im trying to flash XWKI4.
I came across this post and im using a HTC cable to connect, is this a problem??
Edit: Kies really messed up my phone it kept failing on firmware upgrade, asked me to do firmware emergency but that wasnt working either, eventually the firmware upgrade worked BUT the phone doesn't recognise my SIM card so i want to reflash in ODIN
saffad said:
Hi, I been stuck on cache.img for hours (i left it overnight) kies isnt running in the background and i tried many times, im trying to flash XWKI4.
30 mins max
I came across this post and im using a HTC cable to connect, is this a problem??
Probably is not the correct cable as per instructions
jje
Click to expand...
Click to collapse
hah yea had the same problem, its always dam kies gw gw
Tell me about it, kies is useless.
I tried another firmware but thats stuck on boot.bin right now, i have to travel 2hrs to get my samsung cable!! no idea what to do now..phone doesn't start (says do an emergency recovery). Thinking of going to service centre, i know I haven't void my warranty.
. Thinking of going to service centre, i know I haven't void my warranty.
ROOT = warranty void .Custom rom = void warranty
So if you have neither you are ok if not you need to flash stock rom to unroot and set rom counter to zero with USB jig .
jje
JJEgan said:
. Thinking of going to service centre, i know I haven't void my warranty.
ROOT = warranty void .Custom rom = void warranty
So if you have neither you are ok if not you need to flash stock rom to unroot and set rom counter to zero with USB jig .
jje
Click to expand...
Click to collapse
i never rooted and i never flashed a custom rom, i never even flashed a rom, just used kies to upgrade..so i think im ok
saffad said:
i never rooted and i never flashed a custom rom, i never even flashed a rom, just used kies to upgrade..so i think im ok
Click to expand...
Click to collapse
Yes you are ok .
Kies update broke phone well known service call .
jje
I have got stuck on DATAFS. Should I pull out the battery and give another try or ?
THX
THX A LOT Revived my SII!
****ty kies that sucks my sii wile upgrading fw...
THX ODIN and XDA
how much time it will take via oden i have single file putted in PDA box file is about 1.5 gb
asadnow2k said:
how much time it will take via oden i have single file putted in PDA box file is about 1.5 gb
Click to expand...
Click to collapse
5 - 10 mins to flash an entire firmware. Unless u flashed the wrong file...
"To err is human, to forgive is divine"
Sent from my SGS II
1.5 Gb pda file?
What the hell are you flashing there?
Sent from the little guy
Related
Hi there,
First of all, the firmware info of my GT-I9100 is as follow:
PDA:ZSKI3
PHONE: XXKI3
Date: 23/09/2011
Android 2.3.5
I am currently stuck on a firmware issue and it's in real need to be rescued. Here's the full story.
The device firmware recently just got an upgrade to ZSKI3 through KIES. However, it was pretty upsetting as the upgraded official stock ROM from Samsung still contains bugs (the upgrade aggravated the previous problem as it drains the battery rapidly, still) and thus I made a decision and took the risk, by downloading the official ROM and kernel from the following thread
http://forum.xda-developers.com/showthread.php?t=1075278
and had an attempt revert to my previous firmware version (PDA: ZSKG2; PHONE: XXKG1) by flashing it through Odin. Unfortunately, the program stated the flash process as "failed" on the status bar. Consequently, the phone could not be booted with a message stating "Firmware upgrade encountered an issue" whenever it turns on.
This is what it shows on Odin as a result of flash failure,
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Such action sounds idiotic but I wasn't really aware of such issue before hand.
May I ask whether there is any firmware rescue method to resolve such problem?
Thanks in advance.
Leo
Is this classified as a brick? If this is the case how should it be fixed?
Thanks in advance.
i had the same problem but i flash it back to stock
you need to reinstall all you drives and try to reinstall Odin and try it again. i had the same problem and i fixed it by just reflashing it after a couple minutes of letting it 'cool' down
Firmware upgrade encountered an issue
Polycap said:
you need to reinstall all you drives and try to reinstall Odin and try it again. i had the same problem and i fixed it by just reflashing it after a couple minutes of letting it 'cool' down
Click to expand...
Click to collapse
Please can you tell how to reinstall all you drives and then fix it by just reflashing it. Sorry but i am new in android world. needs a Miracle man to help me out with this "Firmware upgrade encountered an issue".
I have Samsung Galaxy S2
I used the guide in the following link. I checked to make sure i was doing everything as it says. This is not my first phone that I have rooted and installed custom roms......just saying....
Here is the guide i used
http://forum.xda-developers.com/showthread.php?t=1309293
for almost an hour now odin has said...
"<ID:0/022> Added!!
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> zImage
"
Phone is stuck in the Download with 'Downloading.....do not turn off target!!"
Just got my S2 today.....wanted to wait a week before i bricked it. PLEASE HELP??
Don't worry, it's not ruined. The package you're working with does not contain bootloaders.
Unplug the phone, pull the battery, and close Odin.
Then start it over again. There's a chance the file you're using is corrupt and needs to be redownloaded.
Not really sure why you're using Odin to flash a kernel. That will trip the flash counter. Creepyncrawly posted an awesome write up how to flash without tripping the counter.
And he today posted a collection of newer ways to root that also don't involve tripping the flash counter.
Sent from my páhhōniē
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Whereis404 said:
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Click to expand...
Click to collapse
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
jaidev.s said:
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
Click to expand...
Click to collapse
Unless download mode isn't VDown + Home + Power
d4fseeker said:
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Whereis404 said:
Unless download mode isn't VDown + Home + Power
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Click to expand...
Click to collapse
100% see sticky top of the page .
jje
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
JJoos said:
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
Click to expand...
Click to collapse
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Sun90 said:
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Click to expand...
Click to collapse
Yeah, should have been more awake when doing this, feeling stupid....
I heard that a usb jig might solve the problem.
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
pasanjay said:
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
Click to expand...
Click to collapse
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
boki9999 said:
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, he flashed the wrong pit file
Sent from my GT-I9100 using xda premium
I know.
The only way to fix this is Jtag.
Sent from my GT-I9100
Guys, first of all, if there's an answer for my q in previous posts I apologize and thank beforehand for the directions.
This is the deal, i flashed this rom in my gs3 intl version over mobile odin.
Everything went well, loaded fine and all, and the phone overall is working fine, the issue is, as i tried to inject root over odin on my pc, odin returned me the error "no pit partition" and failed.
Same thing happened as i tried to flash again my previous oficial rom.
Is there any solution for this? Can i get root? How do i go back to my ofw?
Thanks Thanks thanks and sorry again for my inexhaustible search.
Andrew_spiegel said:
Guys, first of all, if there's an answer for my q in previous posts I apologize and thank beforehand for the directions.
This is the deal, i flashed this rom in my gs3 intl version over mobile odin.
Everything went well, loaded fine and all, and the phone overall is working fine, the issue is, as i tried to inject root over odin on my pc, odin returned me the error "no pit partition" and failed.
Same thing happened as i tried to flash again my previous oficial rom.
Is there any solution for this? Can i get root? How do i go back to my ofw?
Thanks Thanks thanks and sorry again for my inexhaustible search.
Click to expand...
Click to collapse
Sounds like you flashed the wrong cfroot. Whats the filename of cfroot you flashed.
Also maybe a screenshot of the failed odin message.
Sent from my GT-I9300 using xda premium
I'll post a screen shot as soon as i get home, all i remember is it says something about the pit partition and it fails.
Its smt like this (got it from a post with a similar error)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried both odin 1.8 and 3, same result.
Andrew_spiegel said:
I'll post a screen shot as soon as i get home, all i remember is it says something about the pit partition and it fails.
Its smt like this (got it from a post with a similar error)
Added!!
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
Removed!!
I tried both odin 1.8 and 3, same result.
Click to expand...
Click to collapse
Post the filename of the cfroot you flashed as well.
Sent from my GT-I9300 using xda premium
I dlded it from the zedomax website,
http://galaxys3root.com/galaxy-s3-r...4-2-1-leaked-rom-root-for-galaxy-s3-gt-i9300/
I9300XXUFMB3_I9300OJKFMB3_ILO.zip
Stock leaked fw for s3 i9300
Andrew_spiegel said:
I dlded it from the zedomax website,
http://galaxys3root.com/galaxy-s3-r...4-2-1-leaked-rom-root-for-galaxy-s3-gt-i9300/
I9300XXUFMB3_I9300OJKFMB3_ILO.zip
Stock leaked fw for s3 i9300
Click to expand...
Click to collapse
Hi
you are trying to root 4.2.1. so check if your cfroot version is correct. (CF-Root-SGS3-v6.4.tar)
And how are u flashing official rom? which files are u using?
i'm using that root file you mentioned.
I also tried flashing another stock rom, 4.1.2 but didn't work.
ficti0n851 said:
Post the filename of the cfroot you flashed as well.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tried odin today with the CF-Root-SGS3-v6.4.tar
this is what i got
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Restarted phone, and as usual everything is fine, phone works normally other than some bugs i imagine the rom has.
http://forum.xda-developers.com/showthread.php?t=2214684
Sent from my GT-I9300 using xda app-developers app
lefttobleed said:
http://forum.xda-developers.com/showthread.php?t=2214684
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried that already, odin won't let me flash either a root or another rom even if its stock.
NO1 else haves a remote idea of what is happening to me?
i need to flash again cuz that damn JB leak is draining all my battery in 2/3 of my day....
Yeah, now my phone is softbricked with the Firmware upgrade encountered an issue message. Lucky me!
Andrew_spiegel said:
Yeah, now my phone is softbricked with the Firmware upgrade encountered an issue message. Lucky me!
Click to expand...
Click to collapse
Are you saying softbricked not booting or just that Kies no longer recognizes firmware due to conflicting firmware codes ??
jje
JJEgan said:
Are you saying softbricked not booting or just that Kies no longer recognizes firmware due to conflicting firmware codes ??
jje
Click to expand...
Click to collapse
Not booting, stuck at the "Firmware update has encountered an issue..." screen.
Can get into download mode only, not recovery. Cant flash cuz NAND write error fails on odin.
Thread reads as Nand damaged probably due to partition information table part of the nand faults .
jje