Hello guys, this is my first post. I was subscribed to this website for some time. But I was always able to solve my issues just by searching the forums here without having to post my own thread. However, I have been looking for the "PIT" file for my Samsung Galaxy Light SGH-T399N with no luck. My phone was stuck on the MetroPCS logo screen. So, I have not been able to flash the phone via Odin because this file is missing. I can not even go into recovery mode. I was wondering if you guys could helped me. I appreciate your help in advance!
This is what I am getting from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Anybody? I have read a lot about this and the PIT file is what I need to solve my problem.
This is what I am getting from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Anybody?
I need this file please guys... Anybody?
I thought that this was an easy one.
I actually found the file myself. Here is the file in case somebody else needs it: http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)
Kudos
GalaxyVibe said:
I actually found the file myself. Here is the file in case somebody else needs it: http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)
Click to expand...
Click to collapse
Seek and You Shall Find is truly a Universal Truth
Hopefully this will help me flash my sis's phone FINALLY :highfive:
Related
can anyone help i had this installed 2.2 was woring great then i went to add a movie to my sd card and it froze up.i tried to do a nan restore but something happend and i got a phone>pc picture and cant boot. i can get in dowload mode but nothing works in oden that i can tell it starts loading the my phone screen goes blue
ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> cache.rfs
<ID:0/017> modem.bin
<ID:0/017> factoryfs.rfs
thats as far as odin goes
Try eugenes froyo that doesnt brick.
Sent from my SGH-T959 using XDA App
i tried and thats far as it goes and my screen turns blue
Make sure you are using the latest version of odin, and use the pit file and check repartition in odin.
Sent from my SGH-T959 using XDA App
whats the newest odin
dbm0361 said:
whats the newest odin
Click to expand...
Click to collapse
Try searching for odin v1.7.
Sent from my SGH-T959 using XDA App
same thing goes to 0/017> factoryfs.rfs the my screen changes from download mode to a random color
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> cache.rfs
<ID:0/017> modem.bin
<ID:0/017> factoryfs.rfs
Right click and run odin as admin. Also look at this thread...
http://forum.xda-developers.com/showthread.php?t=798020
tried still no go on it
my phone usually takes 3-4 tries to get odin to work. nothing was done differently on my 1st or 2nd (or even 3rd) try, its weird like that.
keep trying it as people try to help you solve your problem!
As the other thread said, do you have any computer you can try this on? If yea then it might be worth a try for right now.
thanks got it
dbm0361 said:
thanks got it
Click to expand...
Click to collapse
Were you able to get it to work? Do let us know how did you make it work or what worked for you.
dam how come other peoples phones brick? i always flash axura but never bricked for me
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Alright, so sorry if this has already been mentioned before, but I am just tired of googling around threads for an answers so I'm resorting to the Q&A. So I've just picked up a Bell Samsung Galaxy S II and have tried to use a tutorial off of http://androidforums.com/galaxy-s2-...lock-root-bell-galaxy-s2-step-step-guide.html. Generally I have worked with rooting many htc devices but the SSGS2 was my first samsung device which is new grounds to me so I'm not really sure what to do about this problem. Everything goes fine until I reach the part where I have to root the phone with CF-Root-SGS2_XX_OXA_KG2-v4.1-CWM4. Whenever I try to root it, Odin gives <ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> zImage
and stays at zImage. Yes I am in download mode and yes I have enabled debugging under development.
Did you disabled Kies? If not stop it with taskmanager
Sent from my GT-I9100 using XDA App
No root on XDA ???
jje
I've had the same trouble with cf root kk2. Stuck on Zimage. I've rooted before with this, but this file is giving me trouble. Can't figure it out yet. Tried downloading the file again from chainfires thread. I'll figure it out sometime after christmas I guess.
Sent from my GT-I9100 using XDA App
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Whereis404 said:
I tried using the Toolkit to root my SGS3, however, it didn't work.
Edit: Using Odin v3.07
I am trying to reflash it using Odin, but it doesn't seem to work. I tried unrooting and putting the original firmware back on, but I am getting this in Odin
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!! <-- Here I think it disconnects the device
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
At removed, the phone vibrates, and I believe it turns off/disconnects, so I don't think it gets the update. I am using the files that came with the toolkit, such as the boot-stock-i9300xxale8-gsm.tar in the PDA section.
I saw mskip suggest a Sprint flash, but I am not on sprint, so I don't know if this will work (It did work for the other guy, but as I said, I am not on sprint)
Does that Removed!! cause a big problem?
Regards,
404
Click to expand...
Click to collapse
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
jaidev.s said:
are you sure you phone is in download mode and not in recovery mode while flashing? I have seen0that many people make this simple mistake
Click to expand...
Click to collapse
Unless download mode isn't VDown + Home + Power
d4fseeker said:
If you are talking about Sprint:
what is your device hardware?
If it's not i9300 you're in the wrong forum
If it's not exactly the same as the one your toolkit is for, you just softbricked your phone
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Whereis404 said:
Unless download mode isn't VDown + Home + Power
I thought all SGS3s are I9300, but if they are different, mine has SGH-I747M on it
Now seeing that, I probably am in the wrong place
Click to expand...
Click to collapse
100% see sticky top of the page .
jje
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
JJoos said:
I wanted to update my S2 running cwm 4.0.0.4 and lightening rom http://forum.xda-developers.com/showthread.php?t=1095274 (android 2.3)
So i firsted started to upgrade my cwm, so i found this thread:
http://forum.xda-developers.com/showthread.php?t=1118693
So i followed the instructions and I flashed with
pit file: omap4_all_20110627_emmc.pit (http://forum.xda-developers.com/showthread.php?p=29785983)
this file:
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar
which produced this log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
After that it doesn't react on anything. 3 buttons, volume up and down + battery insert, etc.
It gets warm next to the camera.
I probably used the wrong pit file since it is for a I9100g and i think I maybe used to wrong image.
Do I have another option than motherboard replacement or jtag? What I've read a jig won't help me?
Click to expand...
Click to collapse
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Sun90 said:
Man thats a very costly mistake for sure, only a mobo replacement is the solution for u
if its under warranty then ur releaved else u have to shell out money
try JTAg and see
Click to expand...
Click to collapse
Yeah, should have been more awake when doing this, feeling stupid....
I heard that a usb jig might solve the problem.
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
pasanjay said:
Your phone is definitely super bricked. Im telling you by experience. Bcz i once super bricked my s2 trying to wipe in 4.04 stock recovery. Luckily samsung replaced my motherboard and revived my phone. I acted stupid infront of them saying i tried to factory reset the phone and it died. I suggest you do the same if have warranty left. And i dont think a jtag or any other method can revive your phone.
Click to expand...
Click to collapse
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
boki9999 said:
It's not superbrick since he didn't wipe data.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, he flashed the wrong pit file
Sent from my GT-I9100 using xda premium
I know.
The only way to fix this is Jtag.
Sent from my GT-I9100
Hello!
So I am about to go turn in my phone to the sprint store today and get the note 4. I am trying to downgrade to stock from the minium(sp?) Rom. I am trying to run this file N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar.md5 on AP in Odin. The error I am getting is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
I have been working on this for a few hours now and have scoured the internet. I have seen countless people with the same problem but I just can't figure it out. Any suggestions or questions you need answered should be pretty fast, I will be sitting at the computer for the next few hours working on this. Thanks everyone!
skelieman said:
I have been working on this for a few hours now and have scoured the internet. I have seen countless people with the same problem but I just can't figure it out. Any suggestions or questions you need answered should be pretty fast, I will be sitting at the computer for the next few hours working on this. Thanks everyone!
Click to expand...
Click to collapse
Hey Skelie,
What version of the bootloader are you currently on? Once you have upgraded to NAB or newer, you are not able to flash back down below that.
If the only thing you're trying to do is return you phone with a fully Stock ROM, I'd recommend either flashing the NC5 all-in-one restore by rwiclo or the NH7 restore that was uploaded by micmars. Either one should work flawlessly in ODIN v3.7 and you can get your new Note 4!
I hope this helps!
-Topher