[Q] samsung galaxy s2 masters help me pls - Galaxy S II Q&A, Help & Troubleshooting

i have samsung galaxy s2 i have two problem with this
1: a hw info messeage on the screen tell me how to disable this info message i upgrade the software, reset the phone, hard reset the phone but failed to remove this message see image below
message like
HW: REV__
PDA: 19100xxlq5
PHONE: 19100xxlq5
CSC: 19100xxlq5
RF Cal. Date: none
SMD, PBA : N
CAMERA: N/A
TSP: 0x16
TSK: 0x4
2: i install the "color torch light" and i uninstall this a transparent "Bulb" image print on the screen i reset, hard reset, software upgrade but faild to disapear it.

waqarr said:
i have samsung galaxy s2 i have two problem with this
1: a hw info messeage on the screen tell me how to disable this info message i upgrade the software, reset the phone, hard reset the phone but failed to remove this message see image below
message like
HW: REV__
PDA: 19100xxlq5
PHONE: 19100xxlq5
CSC: 19100xxlq5
RF Cal. Date: none
SMD, PBA : N
CAMERA: N/A
TSP: 0x16
TSK: 0x4
2: i install the "color torch light" and i uninstall this a transparent "Bulb" image print on the screen i reset, hard reset, software upgrade but faild to disapear it.
Click to expand...
Click to collapse
Screenshots Please?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]

waqarr said:
i have samsung galaxy s2 i have two problem with this
1: a hw info messeage on the screen tell me how to disable this info message i upgrade the software, reset the phone, hard reset the phone but failed to remove this message see image below
message like
HW: REV__
PDA: 19100xxlq5
PHONE: 19100xxlq5
CSC: 19100xxlq5
RF Cal. Date: none
SMD, PBA : N
CAMERA: N/A
TSP: 0x16
TSK: 0x4
2: i install the "color torch light" and i uninstall this a transparent "Bulb" image print on the screen i reset, hard reset, software upgrade but faild to disapear it.
Click to expand...
Click to collapse
Solution (it worked for a guy with the same problem today):
ROOT access needed.
Download from Market "Terminal Emulator"
Open it and type this commands:
su
echo -n ON > /efs/imei/keystr
sync
reboot
Swyped from my Samsung Galaxy SII

i'm unable to root access the device my phone kernel is 19100xxlq5 first tell me a simple method how can i root my device i'm very thankful to you for this kindness
olhdtv.com/sam.png

waqarr said:
i'm unable to root access the device my phone kernel is 19100xxlq5 first tell me a simple method how can i root my device i'm very thankful to you for this kindness
olhdtv.com/sam.png
Click to expand...
Click to collapse
Root with this method: forum.xda-developers.com/showthread.php?t=1501719
Then try the steps i posted earlier.
Swyped from my Samsung Galaxy SII
---------- Post added at 07:38 PM ---------- Previous post was at 07:33 PM ----------
Please Visit here too: forum.xda-developers.com/showthread.php?t=1756242
This one is not about rooting, but i believe you will learn somethings from that thread because you are on ICS 4.0.4 stock firmware
Swyped from my Samsung Galaxy SII

I root the device successfully and install the terminal emulator from market but problem is when i use "su" command the message apeare on the screen "The selected command does not exist" tell me solution plz i'm very thankful to you

waqarr said:
I root the device successfully and install the terminal emulator from market but problem is when i use "su" command the message apeare on the screen "The selected command does not exist" tell me solution plz i'm very thankful to you
Click to expand...
Click to collapse
Download check root from market too check if root is functioning well
Swyped from my Samsung Galaxy SII

yes device is root successfully i check it now with root checker message from root cheker "Congratulation! This device has root access!" check out my screenshot the message still apear on the screen.

waqarr said:
yes device is root successfully i check it now with root checker message from root cheker "Congratulation! This device has root access!" check out my screenshot the message still apear on the screen.
Click to expand...
Click to collapse
"su" must be in small letters
You need the command to gain root access
Swyped from my Samsung Galaxy SII

really very thankful to you for solving my problem no 1. i use this method to solve this issue
To fix scrren lock issue, do the following:
For ALL whoever are facing problems with the LOCK SCREEN here is the solution :
Tools Needed:
1. Hex Editor
2. Root Explorer
Steps to restore:
1. Using root explorer locate the /efs/imei/ folder. In that folder there should be a file called keystr. In my case the file was missing which is why the lock screen was missing and was causing my problems.
2. using root explorer create a new file called keystr
3. also in root explorer open the file keystr in text editor and type ON
4. now go into hex editor and locate the /efs/imei/keystr file.
5. using hex editor the first two values in green should be 4f and 4e. all others should be 00.
6. make sure you save the file.
7. reboot.
but i have second problem of transparent bulb print on the screen kindly solve this issue now i'm very thankful to you for this kindness

waqarr said:
really very thankful to you for solving my problem no 1. i use this method to solve this issue
To fix scrren lock issue, do the following:
For ALL whoever are facing problems with the LOCK SCREEN here is the solution :
Tools Needed:
1. Hex Editor
2. Root Explorer
Steps to restore:
1. Using root explorer locate the /efs/imei/ folder. In that folder there should be a file called keystr. In my case the file was missing which is why the lock screen was missing and was causing my problems.
2. using root explorer create a new file called keystr
3. also in root explorer open the file keystr in text editor and type ON
4. now go into hex editor and locate the /efs/imei/keystr file.
5. using hex editor the first two values in green should be 4f and 4e. all others should be 00.
6. make sure you save the file.
7. reboot.
but i have second problem of transparent bulb print on the screen kindly solve this issue now i'm very thankful to you for this kindness
Click to expand...
Click to collapse
1. That method is still the same thing as mine. I just wanted to save you the hex editor stuffs.
2. Post screenshot or try to explain the transparent bulb issue better
Swyped from my Samsung Galaxy SII

Jokesy said:
1. That method is still the same thing as mine. I just wanted to save you the hex editor stuffs.
2. Post screenshot or try to explain the transparent bulb issue better
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Transparent Bulb?
Sounds like a widget nA?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]

screenshot of my second problem
olhdtv.com/sam2.jpg
a transparent "bulb" image on the screen, i install the "color flashlite" after uninstall it appear the "bulb" image on it. I upgrade the software, hard reset not disappear, i install the color flashlite again and uninstall it but not dispear. kindly solve my problem i'm very thankful to you for this kindness....

Jokesy said:
Solution (it worked for a guy with the same problem today):
ROOT access needed.
Download from Market "Terminal Emulator"
Open it and type this commands:
su
echo -n ON > /efs/imei/keystr
sync
reboot
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I finally got rid of the black box with this solution. Thank you very much!

You are the man!!!!
finally got it to work but had to make a special busy box script and run it from there... worked like a charm
Omaxe said:
Screenshots Please?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Click to expand...
Click to collapse

genegilseth said:
finally got it to work but had to make a special busy box script and run it from there... worked like a charm
Click to expand...
Click to collapse
I have the same problem,i tried solution 1 & 2 neither works. My device is rooted i checked it now with root checker ..."Congratulation! This device has root access!"
i modify the keystr file end i save it but i think on rebut it rewrites it!
Please post details about the script .
Thanx!

Pleas Help
I have the same problem,i tried solution 1 & 2 and neither works. My device is rooted i checked it with root checker ..."Congratulation! This device has root access!"
I modified the keystr file end save it but i think on rebut it rewrites it!
Please post details about the script.
Is there any other guide about this i google it and nothing!
Pleas with sugar on top HELP !
Thanx!

Help
cezarr said:
I have the same problem,i tried solution 1 & 2 and neither works. My device is rooted i checked it with root checker ..."Congratulation! This device has root access!"
I modified the keystr file end save it but i think on rebut it rewrites it!
Please post details about the script.
Is there any other guide about this i google it and nothing!
Pleas with sugar on top HELP !
Thanx!
Click to expand...
Click to collapse
Hello, how do you solve your problem??

Thank you!!
thank you so much! it works great!! you are so cool!!

Open terminal emulator and type as ;
su
rm /efs/FactoryApp/keystr
rm /efs/FactoryApp/factorymode
echo -n ON >> /efs/FactoryApp/keystr
echo -n ON >> /efs/FactoryApp/factorymode
chown 1000.1000 /efs/FactoryApp/keystr
chown 1000.1000 /efs/FactoryApp/factorymode
chmod 0744 /efs/FactoryApp/keystr
chmod 0744 /efs/FactoryApp/factorymode
reboot
You now should not see the that message anymore. Its because of an EFS corruption.
THANKS BUTTON

Related

Samsung Galaxy 3 GT-i5800/i5801: Enable Live Wallpapers

Due to "high demand" here's a dedicated thread to explain howenable live wallpapers on Samsung i5800/i5801. You can find original tutorial by ali_alex here:
1) You need to root your i5800/i5801, you can find a tutorial here. An alternate method to root was described here
Video for the same see this : http://www.youtube.com/watch?v=cus0yaC5ayY
Hope OP doesn't mind just trying to help - thanks hari
2) Download and unrar "sdcard.rar" (attached to this thread) in your SD Card
3) Download Terminal Emulator from the market (http://www.androlib.com/android.application.jackpal-androidterm-zxnC.aspx)
4) Start terminal emulator from your i5800/i5801 and write (in orders):
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
reboot
When you write "su" and press enter, terminal ask for root permission, give it
5) Once rebooted you can use live wallpapers
Thanks, it works fine. Very nice tutorial!
Sent from my GT-I5800 using Tapatalk
when i write su and press enter it says not found what to do?
Live wallpapers not working on a rooted phone
I've sucessfully rooted the phone using adb and the root.rar from the thread but I cant seem to enable live wallpapers.
Tried the manual transfer of files as well as adding the files in the update.zip file before rooting.
Here is a transcript of an adb session
Code:
C:\root>adb shell
$ su
su
# ls /system/app/LiveW*
ls /system/app/LiveW*
/system/app/LiveWallpapersPicker.apk
# ls /system/lib/librs*
ls /system/lib/librs*
/system/lib/librs_jni.so
# ls /system/lib/libR*
ls /system/lib/libR*
/system/lib/libRS.so
#
So, I know i have the files in the right locations. Now, what am I missing. The Live wallpapers option doesn't appear at all in the "Select Wallpaper from" picker along with "Gallery" and "Wallpaper gallery".
Would appreciate some help.
Cheers.
vj.vijay20 said:
when i write su and press enter it says not found what to do?
Click to expand...
Click to collapse
Root is required
It does work, but the best of them, like the Galactic Core, slows down the phone alot... it just cant handle most of the live wallpapers.
Guess theres a reason not to have them in the first place
hey buddy,
wen ever i prompt of live wallpapers, a msg pop ups "the application livewallpapers has stopped unexpectedly. please try again"
Plz help. hav already worked on this4 hours. dnt want my efforts to go waste.
got it working
Got live wallpapers working for my i5801. It was a problem with the owner/group settings.
Incase anyone else has the same problem do this.
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
chown root.root /system/app/LiveWallpapersPicker.apk
chown root.root /system/lib/librs_jni.so
chown root.root /system/lib/libRS.so
Click to expand...
Click to collapse
Cheers
LenZoid said:
So, I know i have the files in the right locations. Now, what am I missing. The Live wallpapers option doesn't appear at all in the "Select Wallpaper from" picker along with "Gallery" and "Wallpaper gallery".
Would appreciate some help.
Cheers.
Click to expand...
Click to collapse
Live wallpaper not working....
I have the files in the right locations. Now, what am I missing. The Live wallpapers option doesn't appear at all in the "Select Wallpaper from" picker along with "Gallery" and "Wallpaper gallery".
I've tried all the settings mentioned here....please help
Need your help urgently......real urgent....
Hi,
Need your help urgently......real urgent....
I had rooted my phone (samsung galaxy 3) to run live wallpaper, somehow that did not happen, i tried to root the phone again but now it is stuk on the Android System Recovery screen, giving me option to reboot the system / apply sdcard:update.zip....etc etc..
iv'e rebooted the phone multiple times...it is not starting ....please please please help me......
help...
when iwrite these code it shows "cannot create......:read only file system" what to do
I am also facing same problem as the one of the above user.I think that i have rooted my phone because when i type su i am granted special read write permission. when i type the cat & the rest of the command i get this read only error.
Pls help.
sonijd said:
Hi,
Need your help urgently......real urgent....
I had rooted my phone (samsung galaxy 3) to run live wallpaper, somehow that did not happen, i tried to root the phone again but now it is stuk on the Android System Recovery screen, giving me option to reboot the system / apply sdcard:update.zip....etc etc..
iv'e rebooted the phone multiple times...it is not starting ....please please please help me......
Click to expand...
Click to collapse
remove sd card and reboot... sorry for my english
Wallpapers works great! Thank you!
Friends from India
hi friends,
Even i couldn't get the Live Wallpapers in the First Go.With Same Error "Cannot Create ... : Read only file System"
but i guess the mistake is simple jus try typing as it is given even Caps,Spaces etc.
it worked for me.
And Thanks To the Admin for posting this it took me a little more than 5 hrs to figure out the correct file even after giving the links (there's a spl file for I5801 india) please try rooting through that.
Love this forum
I'm able 2 run first line but when i tried 2 execute 2nd line it gave me following error
cannot create /system it is a directory
wat is that special file i'm also from india plz rep me back 2 my email if possible send d file also my id is [email protected]
Rooting and installing the live wallpaper worked perfectly for me, although I had a little hard time typing the codes.
The only problem I face now is that my phone isn't coming as a storage device when I plug it in the USB. I tried the USB settings, Debugging etc in the phone. The PC detects it as "Samsung USB Composite Device". Any solutions to my problem?
Its probably a typo that causes the error. I suggest going to ur internet browser on your phone, to this website, and simply copy each kernal 1 line at a time.
also, I have enabled live wallpapers, and while its an amazing feature, i seem to have a problem, and that problem is that the phone switches off once in a day due to locking up and then restarts.
i have been at it for 5 god damn hours and nothing has happened....it jus keeps saying no such dir found....
its there u damn phone!!! look!!
what do i do to fix this....have read all the threads relating to live wallpapers....no luck!

[Q] on any ICS Rom phone never locks,HELP?

whatever ICS rom i use my phone never locks/sleeps.i set faceunlock pattern pin evrything different times and never it goes to sleep or locks whether i press lock button or not like gingerbread roms... :S anyone got any solution... cant lock my phone.. or get it into sleep mode anyway :S
Try the latest release or go back to GB and wait for Samsung to release ICS is about all or even post in one of the many ICS threads .
jje
i have the same problem
flash it with [ROM][IML74K][4.0.3] CyanogenMod 9 experimental Build
this 1 works
JJEgan said:
Try the latest release or go back to GB and wait for Samsung to release ICS is about all or even post in one of the many ICS threads .
jje
Click to expand...
Click to collapse
i tried all official ics roms and a few custom 1s and on no roms screen lock or any kind of lock never works...
victorbd said:
i tried all official ics roms and a few custom 1s and on no roms screen lock or any kind of lock never works...
Click to expand...
Click to collapse
There are no "official" ICS ROMs because there is no official ICS for the SGS2.
Odia said:
# echo -n ON > /efs/imei/keystr
# reboot
Click to expand...
Click to collapse
There's plenty of other information in the threads dealing with these ROMs too. If only people would ask/read there, rather than making new threads for every issue they encounter.
(potential original source in T989 forums http://forum.xda-developers.com/showthread.php?t=1438451)
problem solfd!!
just do:
- Download "Terminal Emulator" app from market
- open it
- type into the command:
su
echo -n ON > /efs/imei/keystr
sync
reboot
- go in recovery mode : clear both cache and Dalvik and factory reset!!
you wil have your screenlock bak
State at least whom and from where you quoted
tonyblazze said:
problem solfd!!
just do:
- Download "Terminal Emulator" app from market
- open it
- type into the command:
su
echo -n ON > /efs/imei/keystr
sync
reboot
- go in recovery mode : clear both cache and Dalvik and factory reset!!
you wil have your screenlock bak
Click to expand...
Click to collapse
problem!
Guys,
I have a same problem. I install the app "Android Terminal Emulator", but when use this:
# echo -n ON > /efs/imei/keystr
# reboot
the terminal show the message "permission denied"
Please help me!
antifakie said:
Guys,
I have a same problem. I install the app "Android Terminal Emulator", but when use this:
# echo -n ON > /efs/imei/keystr
# reboot
the terminal show the message "permission denied"
Please help me!
Click to expand...
Click to collapse
You need root to apply this. The "#" prompt at the beginning of the lines indicates that you have su permissions. If you have an "$" prompt instead, and are getting a message "permission denied", then you likely do not have root. If you DO have root, you may have to run "su" before the first line.
still problem
[/COLOR]
ctomgee said:
You need root to apply this. The "#" prompt at the beginning of the lines indicates that you have su permissions. If you have an "$" prompt instead, and are getting a message "permission denied", then you likely do not have root. If you DO have root, you may have to run "su" before the first line.
Click to expand...
Click to collapse
Thanks for the answer, but when i type the command "su", the terminal show message: /system/bin/sh: su: not found"
I don't know what happen
antifakie said:
[/COLOR]
Thanks for the answer, but when i type the command "su", the terminal show message: /system/bin/sh: su: not found"
I don't know what happen
Click to expand...
Click to collapse
Dude. The very first sentence of my post said "you need root to apply this". If you are not rooted, you will not have the su binary, thus you cannot do this.
Root your phone first.
Though, if you can't understand what I'm saying, maybe you shouldn't.
ctomgee said:
Dude. The very first sentence of my post said "you need root to apply this". If you are not rooted, you will not have the su binary, thus you cannot do this.
Root your phone first.
Though, if you can't understand what I'm saying, maybe you shouldn't.
Click to expand...
Click to collapse
I understand, but i use a stock rom of ICS. Should be rooted my phone with a kernel that have a root or exist other form to root the phone?
Thanks a lot!
antifakie said:
I understand, but i use a stock rom of ICS. Should be rooted my phone with a kernel that have a root or exist other form to root the phone?
Thanks a lot!
Click to expand...
Click to collapse
Sorry, I don't really understand what you are asking.
Bottom line; you need root to apply the fix. However you are able to accomplish this doesn't matter.
ctomgee said:
Sorry, I don't really understand what you are asking.
Bottom line; you need root to apply the fix. However you are able to accomplish this doesn't matter.
Click to expand...
Click to collapse
OK, thanks!

Lock Screen and Home Button not working. [Fixed]

Solution.
Download from Market "Terminal Emulator"
Open it and type this commands:
HTML:
su
echo -n ON > /efs/imei/keystr
sync
reboot
100% it will works
thanks for the tip.... it worked like a charm.....
it works first time..
It works really gud first time. But i moved the efs and copy it again, which made it disapear.. pls help me to correct again..
Phyzicx said:
Problem solved! Close this post
Solution.
Download from Market "Terminal Emulator"
Open it and type this commands:
HTML:
su
echo -n ON > /efs/imei/keystr
sync
reboot
100% it will works
Click to expand...
Click to collapse
thanks, fixed too
cheers
It's not working nw.. Pls help...
works ....
thanks a lot ... works like a charm....
lockscreen, initiate setup menu, power button menu all fixed.. Yay
Do we have to be rooted to be able to use Terminal Emulator with mentioned codes?
worked like a charm..
you guys simply amaze me..
many thanks..
cool
thank you!
ardicli2000 said:
Do we have to be rooted to be able to use Terminal Emulator with mentioned codes?
Click to expand...
Click to collapse
Yes of course. How else is the SU command in the terminal emulator going to go through?
happily1986 said:
Yes of course. How else is the SU command in the terminal emulator going to go through?
Click to expand...
Click to collapse
I have the power menu but the lockscreen and home button dont work. I seem to be alone with this problem because everyone else reports that all 3 are missing. I've tried all of the keystr fixes uses root explorer or terminal emu and nothing has worked :/ I'm on CM9 if that makes a difference.
If anyone can help I'd really appreciate it.
PLEASE HELP!!!!
I have the same issue and I have used terminal emu and nothing has worked. I have a SG SIII it has something to do with Titanium Backup as everything works find until i do a restore, I have to many apps to narrow it down to the one or two that are acting up.
Thanks in advanced.
Phyzicx said:
Problem solved! Close this post
Solution.
Download from Market "Terminal Emulator"
Open it and type this commands:
HTML:
su
echo -n ON > /efs/imei/keystr
sync
reboot
100% it will works
Click to expand...
Click to collapse
Thanks a bunch! Worked for me on my i9100 XWLP7
Phyzicx said:
HTML:
su
echo -n ON > /efs/imei/keystr
sync
reboot
Click to expand...
Click to collapse
Thanks mate helped me a lot! Friend's s2 somehow lost the keystr file after upgrade from factory default 2.3.4 to ICS XXLPW.
Worth mentioning that you can do the same through the adb shell if you can't/don't want to install from market.
when your phone restart. does it say in a quick fade in fade out msg that is it in factory mode?
if it does
use terminal emulator and type the commands. (worked perfect for me)
su
# echo -n ON > /efs/FactoryApp/factorymode
reboot
Keldig said:
PLEASE HELP!!!!
I have the same issue and I have used terminal emu and nothing has worked. I have a SG SIII it has something to do with Titanium Backup as everything works find until i do a restore, I have to many apps to narrow it down to the one or two that are acting up.
Thanks in advanced.
Click to expand...
Click to collapse
When I type in "su" it says "the selected command does not exist." Is that supposed to happen or is there something that i am missing?
galaxy_ said:
When I type in "su" it says "the selected command does not exist." Is that supposed to happen or is there something that i am missing?
Click to expand...
Click to collapse
su should be in small caps. Make sure you are rooted too
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Yea I rooted my phone by using this method here: http://forum.xda-developers.com/show....php?t=1501719
And I do put it in small caps but it still does not work. It says the same thing each and every time. But if I skip to the next command and type in echo -n ON > /efs/imei/keystr, it says that it is turned on.
galaxy_ said:
Yea I rooted my phone by using this method here: http://forum.xda-developers.com/show....php?t=1501719
And I do put it in small caps but it still does not work. It says the same thing each and every time. But if I skip to the next command and type in echo -n ON > /efs/imei/keystr, it says that it is turned on.
Click to expand...
Click to collapse
Use this long step:
To fix scrren lock issue, do the following:
For ALL whoever are facing problems with the LOCK SCREEN here is the solution :
Tools Needed:
1. Root Explorer or Solid Explorer
Steps to restore:
1. Using root explorer locate the /efs/imei/ folder. In that folder there should be a file called keystr. In my case the file was missing which is why the lock screen was missing and was causing my problems.
2. using root explorer create a new file called keystr
3. also in root explorer open the file keystr in text editor and type ON
4. now go into hex editor and locate the /efs/imei/keystr file.
5. make sure you save the file.
6. reboot.
Click to expand...
Click to collapse
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
It worked, thanks alot!! Ive been messing around with it for a week trying to figure it out.

Android tablet problem ..NEED HELP !

This is the info about my android
Model number: T02A
Android version: 4.0.3
Baseband version: 0.7-cts
Kernel version: 3.0.8+
Buid number: crane_evb-eng 4.0.3 IML74K 20120215 test keys ..
i cant upload a video about my problem because i dont have extra cam to record it ..
I rooted my Android Tablet with GAMECIH then while surfing how to use this rooting device, my tablet turns off ..and when i turn it on, i was shocked because it RESETs ..all applications are gone, wallpapers, all,all,all,all .. its like FACTORY RESETTING all settings back to default ..and when i change the settings again then reboot, my settings does not save ..then ill try it many times and nothing still happen ..and some application is still in my SD and i try to install it and it says "_____ could not be installed. Free up some space and try again" ..but all my application is wiped out so what SPACE ?? i have 3GB free space ..
PLS HELP ME WITH THIS PROBLEM ..IM STILL ONLINE .
SORRY FOR THE BAD ENGLISH
I have the same problem, however I think mine came rooted from factory.
Did you find a solution?
My tablet-pc has Model number: T05A and
Build number: crane_evb-eng 4.0.3. IML74K 20120322 test-keys
Is it a Chinese-Brand tablet? Sounds like a hardware problem going on, did you try to unroot it?
Maybe we find answer via Google: "android busybox factory-reset-after-every-restart-shutdown".
... I am not allowed to paste links here
Is it under warranty?
Sent from my HTC Wildfire S using xda premium
Solved
Problem solved (at least for me) with the following procedure:
1. Find a valid Android Device ID --- needed for apk downloader
2. Download BusyBox .apk from GooglePlay via codekiem apk downloader
3. Install Android SDK and ADB on PC
4. Install Google device driver for ADB
5. On PC in DOS-cmd-window: adb install stericson.busybox-116.apk (if failure: try with -s option)
6. On tablet: Install Busybox in /system/bin ( xbin = big mistake!!!)
7. Restarted the tablet-pc and found all apps and settings restored
I'm not getting it right
My friend has one of these :
Model number: T05A
He installed the BusyBox on xbin and his device is stuck on factory resetting every reboot.
I looked at CocoaBean solution but when I do it I get this :
4455 KB/s (5536756 bytes in 1.213s)
pkg: /data/local/tmp/bb783.apk
pkg----5------:
pkg----6------:
Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]
Now I know the device has 1 GB of space.
I also have the exact same Tablet and was wandering, is there a way to backup my total rom and put it on his tables ?
My tablet is new with nothing on so its a nice device to image.
I'm also not to worried about his apps and stuff, he doesn't care just wants it to work again.
Any advice ?
Hexes said:
Any advice ?
Click to expand...
Click to collapse
try -s option: adb install -s bb783.apk
PM files
files someone might need to restore...
T05A firmware
Guys,
if any of you needs to reflash your tablet and cannot find the firmware of the manufacturer for Elijah U9 (T05A), I've made a separate thread for it here.
By the way, CocoaBean, thanks for the files.
CocoaBean said:
Problem solved (at least for me) with the following procedure:
1. Find a valid Android Device ID --- needed for apk downloader
2. Download BusyBox .apk from GooglePlay via codekiem apk downloader
3. Install Android SDK and ADB on PC
4. Install Google device driver for ADB
5. On PC in DOS-cmd-window: adb install stericson.busybox-116.apk (if failure: try with -s option)
6. On tablet: Install Busybox in /system/bin ( xbin = big mistake!!!)
7. Restarted the tablet-pc and found all apps and settings restored
Click to expand...
Click to collapse
Big Thanksssssssssss!!!
CocoaBean said:
try -s option: adb install -s bb783.apk
Click to expand...
Click to collapse
Dear CocoaBean ,
i have same problem in my same tablet , i do your suggestions and insatall BusyBox but busybox show error that need root access , i try something for root and programms said rooted but busybox said not root access i cant find way to solve this
please help me ...
same problem on Micromax funbook tab
avayearam said:
Dear CocoaBean ,
i have same problem in my same tablet , i do your suggestions and insatall BusyBox but busybox show error that need root access , i try something for root and programms said rooted but busybox said not root access i cant find way to solve this
please help me ...
Click to expand...
Click to collapse
I am facing the same problem with my Micromax funbook infinity tab. Did u guys find the solution... ????
Able to install BusyBox but it is asking for root access. And now I am not able to root it with any method. Please Help...
the_HUNK said:
I am facing the same problem with my Micromax funbook infinity tab. Did u guys find the solution... ????
Able to install BusyBox but it is asking for root access. And now I am not able to root it with any method. Please Help...
Click to expand...
Click to collapse
first root it using the Root process given in the Namaste Guide. and then try thiss.
T05A black screen
Hi guys,
I hve T05a tablet. I install custom rom through LiveSuit but after installation device showing black screen. so i search appropriate ROM for my device n i install many other ROM like
1. 9.7-4.28
2. sun4i_crane_t05a_mma7660_2012061
3. 97F1-D2-H2-H01-W402.20120210
4. A90sun4i_crane_t05a_mma7660_20120614
5. aino_2.0.4
6. F1
7. sun4i_crane_t05a_1.2_20120503
8. TAB360-364_Android_411_Jelly_Bean
config
Model : T05a
Allwinner A10 chipset
1gb ram
even after all this things my device still have same problem. but when i install 9.7-4.28 it's show disply but only show some white line like a Barcode.
guyssssss plz plzzzzzzzzzz helpppppppppppppppppppp helppppppp

After ICS update my block screen settings don't work

Hi, guys.
I just updated my phone with ICS and after that my lock screen settings don't work (slide,facial, pattenr), is this a common issue on this update? should i flash again to stock and upate again trough the phone?
Betornillo said:
Hi, guys.
I just updated my phone with ICS and after that my lock screen settings don't work (slide,facial, pattenr), is this a common issue on this update? should i flash again to stock and upate again trough the phone?
Click to expand...
Click to collapse
Check for /efs/imei/keystr. Should contain "ON". If it doesn't exist, you'll need to create it. You need root to accomplish any of this.
ctomgee said:
Check for /efs/imei/keystr. Should contain "ON". If it doesn't exist, you'll need to create it. You need root to accomplish any of this.
Click to expand...
Click to collapse
Thanks friend. Just one more question. Is this dangerous to the EFS folder, i just got back my phone after 18 days on the warranty service since it lost it's IMEI and i don't want to pass trough that 18 days again, should i root the phone, back up the EFS folder and then try your solution.
What do you think friend?
Can i use thi solution i found on this post
http://forum.xda-developers.com/showthread.php?t=1648026
"- Download "Terminal Emulator" app from market
- open it
- type into the command:
su
echo -n ON > /efs/imei/keystr
sync
Go to home, force close your terminal app, shut your screen off, and when your turn it back on your lock screen should be there."
Betornillo said:
Thanks friend. Just one more question. Is this dangerous to the EFS folder, i just got back my phone after 18 days on the warranty service since it lost it's IMEI and i don't want to pass trough that 18 days again, should i root the phone, back up the EFS folder and then try your solution.
What do you think friend?
Can i use thi solution i found on this post
http://forum.xda-developers.com/showthread.php?t=1648026
"- Download "Terminal Emulator" app from market
- open it
- type into the command:
su
echo -n ON > /efs/imei/keystr
sync
Go to home, force close your terminal app, shut your screen off, and when your turn it back on your lock screen should be there."
Click to expand...
Click to collapse
You should always back up your efs folder.
And yes, that will work. Also check to make sure the file has at least read permissions for all groups once it's created.
ctomgee said:
You should always back up your efs folder.
And yes, that will work. Also check to make sure the file has at least read permissions for all groups once it's created.
Click to expand...
Click to collapse
Well the thing i did not want to do i already did, my phone is stuck on the boot screen afteri tried to downgrade from ics to GB using this rom
I9100UMKG4_I9100UMKG2_I9100TCEKG4_HOME (wich is correct because i used it before three weeks ago in order to restore my phone and make work the warranty)
after the flash the phone showed me several red letters with the E: cant mount file *****
OMG What should i do. i'm in panic again cause i just got it back after 18 days :'(
I can acces to download mode, is this thing good. should i stop flashing and flshing the same rom?
Pls help
i made some research about the e: can't mount trouble and looks like i need to install the i9100XXKH3 with the re-pratition field checked, so i'll try that. Wish me luck :'(
Meanwhile i'll search some clean underwear cause those red letters scared me.

Categories

Resources