I've not seen this posted anywhere in the i717 part of the forms, and felt like it should be OK to post this.
Ever since I got my Galaxy Note from Rogers, I keep getting sporadic data connectivity issues. LTE data will work great, but if I set my phone down (such as when I am at work) and don't touch it for several hours, by the time I return the phone has no data connection.
However the status bar shows that I have full bars connected to LTE, yet when I open a browser or try to use the Play Store, it keeps saying I have no data connection.
This problem occurs on stock, and with custom roms, currently I am using the latest stable release of CM9 Quincyatt.
Has anyone else run into this problem (with Rogers or any other provider that offers LTE with the sgh-i717)? If so, is there anything I can do to mitigate this issue, currently the only fix I've is to simply reboot the phone. This seems to fix the problem, allowing me to access data until the next lengthy period of inactivity. Then of course after several hours of inactivity, when I go to use it again data will once again be dead (even though the phone reports I have a strong signal).
have you tried this Rogers rux lf4 modem? I've been having great results with the bell modem
http://forum.xda-developers.com/showthread.php?t=1801689
Jake_HT said:
have you tried this Rogers rux lf4 modem? I've been having great results with the bell modem
http://forum.xda-developers.com/showthread.php?t=1801689
Click to expand...
Click to collapse
Ah, I have not. Thanks for the tip!
I'll give this a go when I get home! Thanks!
Related
So all of a sudden my TB's 3G started acting odd. It disappears (the 3G icon disappears) unless I'm checking for updates, in which case it randomly reappears and seems to be doing work. Toggling airplane mode on and off doesn't help nor does turning the phone on and off. I can still get texts and calls but no 3G...
Tried everything (going back to ROMs that were backed up from a few days ago) as well as flashing that full new ROM/radio update. Wasn't doing anything specific before it went out...
Any ideas?
solved!
solution: http://www.androidcentral.com/having-3g-problems-your-thunderbolt-fix-just-few-settings-away
swimminsurfer256 said:
solved!
solution: http://www.androidcentral.com/having-3g-problems-your-thunderbolt-fix-just-few-settings-away
Click to expand...
Click to collapse
I didn't find that this worked at all. Only since the new radio was installed have I found 3g drop because I know I am in a partial 4g area. So for the time being I don't want to turn of the ePHRD. Has anyone else experienced this since upgrading radio and such?
Spencer_Moore said:
I didn't find that this worked at all. Only since the new radio was installed have I found 3g drop because I know I am in a partial 4g area. So for the time being I don't want to turn of the ePHRD. Has anyone else experienced this since upgrading radio and such?
Click to expand...
Click to collapse
Well I did upgrade the radio and this fixed the problems I was having. Getting great speeds now. But I'm far away from any 4G areas :/
I am having all kinds of problems today with the 3g icon going on and off. Sometimes when its on I still do not have data connectivity. Is this a verizon problem or just the new radio?
I think it has to do with LTE being prepped to roll out and more intensive stress-tests that they may be planning.
I've been having similar issues. I did the entire rooting process then flashed BAMF 1.5 and had little radio issues, but once I saw the 3G cut out a couple times yesterday, I flashed the radio that was already on my SD card. Since then it randomly cuts in and out, and sometimes requires a full phone reboot to come back. I don't think it's Verizon at all (at least not in my case), although my area is supposed to get 4G sometime this year.
I'm hoping the official OTA has a "better" radio that can fix these issues...since I sort of had issues like this in Boston when I was stock, but at home out in Central MA, 3G was as solid as ever.
Just an update in case anyone was reading this older thread--I continued to have signal issues for a day or two after rooting but I think I just had bad timing on flashing the new radio. I've spoken to a few Verizon customers (my mom included) and many of them had 3G issues the last couple days. Yesterday it was solid as a rock, signal better than I'm used to. So it probably was just a Verizon outage, testing 4G or whatever it was that they've been doing.
It's Verizon outages right now, lots of testing upgrading going on with VZW right now.
Hey all, i thought i would start a thread about an issue that many canadians seem to have with the GS2, it seems to have been beat to death but there is no actual solution.
Im currently using the GS2 with Telus, its a wcdma/3G/H/H+ carrier using the frequency 1900 mostly and 850 at times on the cdma network, i used so far KG3-KG6 i placed them in that order because KG6 is the latest i tried and has proven to give me better coverage but its still really bad..
I can connect to data but only outdoors or only when the reception is full bars, if i start to lose any bars there goes my data connection and i can no longuer use any services data/sms/mms/calls i literaly cant do anything..
This is a big issue as i know for a fact that you dont need a data connection to send sms. but it seems the galaxy s2 under the current modem firmware im using KG6 wont allow me to unless im on full data coverage...
My question is this, what is the best modem firmware to use according to the frequencies that i meantioned earlier 1900/850 WCDMA i dont mind using another country's modem as long as they are oriented towards the same frequencies that i need
My phone came from Korea and i know they use 2100/900 could that be the issue? Is my hardware oriented towards that? At this point anything could help and please feel free to post thanks
SL.
What is the model # of your phone?
Sent from my GT-I9100M using XDA App
GT-I9100 thats my model
im using
PDA: I9100XXKG6
PHONE: I9100XXKG6
CSC: I91000XAKG6
Hmm, I'm a SGS2 owner on TELUS as well and haven't had any problems so far, besides the GPS Lock Time which most people seem to complain about. It takes about 1 minute for the GPS to lock for me, but my data is fine. No dropped calls or sms problems here. My download speed as I checked last was at 8.31 Mbps down and about 2 Mbps up.
But again, having horrible GPS issues. Wish I could figure that one out
Sobai can u post your results to *#1234#
so i can compare my settings to yours.
I'm using KG6 on Rogers network and don't have fantastic reception either. For most situations it holds calls -- but buildings with lots of concrete I lose the signal completely. It's as if I'm not truly on the 850 band ... my G1 had the same problem until I flashed a Bell-specific modem, that solved the problem. I guess we'll have to wait until Bell launches the G2 here, we'll be able to swipe the modem again.
i have an imported gs2 that i am using on rogers and it doesnt drop calls, but i have had times in the past when it would show 3g but not download any data. once i turned airplane mode on and off data would work fine again. the best radio for me has been the kf2 modem in terms of not having the data stalling issue. i find that even if i show no bars of strength i can still download data with no issue.
if you are on telus i would make sure so set the wireless settings to 3g only so the phone doesnt try to look for a 2g signal.
KG2 on a Bell SGS2 on Rogers/Fido network in Vancouver.
GPS locks in seconds. no dropped calls. H+ all the time, never once saw a 3G symbol. no data dropouts.
over 7Mbps down on this network with the SGS2, when i had 1/3rd the speeds an HTC Desire. great reception in my office downtown, my apartment, everywhere i've been so far.
KG2 (not the stock canadian though), in Montreal on the Virgin/Bell network. So far no complaints on the data. Since I started messing w/ the firmware however, the connection is on 3G when idle and only switches to H+ when actually in use. From what i've been reading many people have been noticing this when flashing over the stock Canadian firmware.
On the other hand however, the GPS has been having a hard time establishing a lock (whereas it used to be quite speedy and precise before I flashed). Won`t be able to test whether this is a firmware problem untill the stock Canadian is released by Samsung.
PDA: I9100XXKG6
PHONE: I9100XXKG2
CSC: I9100OXAKG6
Sent from my GT-I9100 using XDA App
Wow guys I appreciate the feedback I thought I was the only one with this issue! I will definitely give kf2 a try right now and I'll also download the 3G only data app and give it a try and I'll get back to u guys with some feedback. Thanks again
Btw I'm using, touch x 3.2 rom that has kg5 on and I did notice a little improvement in the reception but the data connectivity is still very spotty so I'll give kf2 a try but so far kg5 modem is definitely the best one I seen so far to use on telus. Btw anyone trying to use the galaxy s2 on fido, I was never able to get 3G at all to work I was stuck on edge.
hondaguy said:
i have an imported gs2 that i am using on rogers and it doesnt drop calls, but i have had times in the past when it would show 3g but not download any data. once i turned airplane mode on and off data would work fine again. the best radio for me has been the kf2 modem in terms of not having the data stalling issue. i find that even if i show no bars of strength i can still download data with no issue.
if you are on telus i would make sure so set the wireless settings to 3g only so the phone doesnt try to look for a 2g signal.
Click to expand...
Click to collapse
Do you know how I would be able to set it up so that it stays locked on 3G? I tried the *#301279# trick and disabling hsdpa and hsupa with revision 99 but to no avail. Even if it shows full bars and 3G I still get no data connection and also I can't send or receive texts unless there is a data connection for some reason, have you guys had this issue??
sashpimp said:
Do you know how I would be able to set it up so that it stays locked on 3G? I tried the *#301279# trick and disabling hsdpa and hsupa with revision 99 but to no avail. Even if it shows full bars and 3G I still get no data connection and also I can't send or receive texts unless there is a data connection for some reason, have you guys had this issue??
Click to expand...
Click to collapse
i have never needed to mess around with that menu. you should be able to go to
settings
wireless network
mobile networks
network mode
select wcdma only
that will lock it to 3 only. if you keep having issues you might get a new sim card from telus as that might be causing you some issues
Do you have your apn configured properly for your provider? If it isnt your data definitely work. Other then that I havent had these issues in edmonton on kg6 or maybe I just dont know what to expect reception wise. I do notice it hops from 3G to hspa to hspa+ a lot so i switched to only 3g. If anyone finds anything that improves that or reception though I would be interested
Sobai said:
Hmm, I'm a SGS2 owner on TELUS as well and haven't had any problems so far, besides the GPS Lock Time which most people seem to complain about. It takes about 1 minute for the GPS to lock for me, but my data is fine. No dropped calls or sms problems here. My download speed as I checked last was at 8.31 Mbps down and about 2 Mbps up.
But again, having horrible GPS issues. Wish I could figure that one out
Click to expand...
Click to collapse
Can u post what Rom u are currently using and modem ?
sashpimp said:
Can u post what Rom u are currently using and modem ?
Click to expand...
Click to collapse
This information would be great because I am also experiencing spotty data connectivity (browser loads data, stalls, resumes centuries later) which results in severe crappy data speeds of 0.8mbps down and 0.07mbps up (done on in-browser speakeasy test and speedtest.net app.
Running VillianRom 2.4.2 on Bell's I9100M over Telus Network
PDA: I9100XXKG6
PHONE: I9100XXKG3
CSC: I9100OXAKG6
nk_blu said:
This information would be great because I am also experiencing spotty data connectivity (browser loads data, stalls, resumes centuries later) which results in severe crappy data speeds of 0.8mbps down and 0.07mbps up (done on in-browser speakeasy test and speedtest.net app.
Running VillianRom 2.4.2 on Bell's I9100M over Telus Network
PDA: I9100XXKG6
PHONE: I9100XXKG3
CSC: I9100OXAKG6
Click to expand...
Click to collapse
I wish there was a way to extract the modem.bin file from the bell sgs2 this way we could simply distibute it around. Someone should root their phone, install cwm4 and make a backup and we could simply pass the backup around so we could all have the modem
Bell modem has already been posted to the forum.
sashpimp said:
I wish there was a way to extract the modem.bin file from the bell sgs2 this way we could simply distibute it around. Someone should root their phone, install cwm4 and make a backup and we could simply pass the backup around so we could all have the modem
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA Premium App
Or flash KG6, KH1, whichever modem you please.
Sent from my GT-I9100 using XDA Premium App
Hi All,
I am having a strange problem with my S2 since last few months. I am from Mumbai, India and using Airtel network. There is a spot in my apartment which has very poor network reception of Airtel and I face issues whenever my cell is in that spot for a while. It happens that whenever I take my cell in that area, it starts losing signal bars till no bars are highlighted on the status bar at the top. It keeps showing zero bars but does not show "no signal" icon. Then, after keeping my cell in that spot for a while when I bring it in a better connectivity spot, signal bars start increasing and it appears that my cell has better reception again. However, if anyone tries to call me or I try to call anyone, they get "Out of coverage area" message or I get "Network registration failed" message respectively. I am having this problem since the day I started using Airtel and have tried a lot of remedies but only thing that works is rebooting my cell. I have tried using OpenSignal app to reset my connection whenever my cell comes back from the spot but even that fails to revive it and ultimately I have to reboot.
Has anyone faced such an issue and any ideas about a fix? Does it look like an issue with my cell or could it be an issue with my network provider? I would prefer not to root my S2 since I have 3 years warranty on it but if you think that it's the only way out of this, please let me know your opinion.
Thanks.
Sounds like a carrier issue to me. You pretty much said exactly that yourself when you said 'There is a spot in my apartment which has very poor network reception of Airtel and I face issues whenever my cell is in that spot for a while'.
That's normal in many buildings. Particularly if the network coverage in your area is borderline or poor. I have a similar issue in my house, in a few rooms I get no bars & sometimes coverage drops out completely, whereas in my loungeroom/dining/kitchen at the back of the house I get good coverage (for me, anyways).
You could try different modems, which might improve things. You don't have to be rooted to flash these, you can flash them using Odin. Tho it is easier to flash them with CWM if you're rooted.
I use to had the same issue with my 3 carrier at my desk in the office, and still on 2g services. I but since last month they already improved to hsdpa network added more bts and now my blank spot became H.
Yes you may try to change other service providers
Sent from my GT-I9100 using xda premium
Thanks for your suggestions guys. Yes, it might be only related to the carrier. But, I think that if signal goes down to zero and then when my cell is back in better coverage zone, shouldn't the modem take care of network registration by itself? My problem is that it doesn't. I have to reboot my cell every time after I come to know that my cell is showing signal bars but is not actually registered on the network. If I reboot my cell, everything becomes normal and so if it was just an issue with the carrier, shouldn't it continue like that even after reboot? If I think about it logically, I think following should help me out:
1. Try out a different cell for a few days and see if I face this issue or not.
2. If answer to 1 is no, then try out different modems on my S2 and see if that helps.
Actually, I just wanted to check if anyone else has faced this issue and figured out that something is not right with S2 drivers or something? That would help me with quick resolution of my problem.
Sent from my GT-I9100 using XDA
Yep, your logic is sound ;-)
One thing tho. With regard to trying your sim out in another phone, you have to keep in mind the radio hardware is obviously different in different phones. And what that means is (and this is something I've observed on XDA), chances are you'll find the sim works perfectly in the other phone & you have no issues at all. This might be due to the actual equipment your carrier is using in the cell tower(s) you're close to, also the frequencies that gear is using might also be playing a part in your problems.
So definitely try it out in another phone & see what happens, but you could do worse than try out a bunch of modems in the S2 & see if that improves things.
crypticlight said:
1. Try out a different cell for a few days and see if I face this issue or not.
2. If answer to 1 is no, then try out different modems on my S2 and see if that helps.
Actually, I just wanted to check if anyone else has faced this issue and figured out that something is not right with S2 drivers or something? That would help me with quick resolution of my problem.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Those are carrier issues, and maybe even the material of the constructions, in my house there are rooms where there's almost no signal at all, and in the living room it's ok, you should try to see in which tower you are connected maybe thats the problem
I have also had these problems on various networks here in Australia. If you don't need the data network, you could try using 2G only option. But that's not really a fix, is it? I suggest you try a pre-paid SIM from another network provider, to test them out first, before re-contracting.
Good luck. :fingers-crossed:
MistahBungle said:
One thing tho. With regard to trying your sim out in another phone, you have to keep in mind the radio hardware is obviously different in different phones. And what that means is (and this is something I've observed on XDA), chances are you'll find the sim works perfectly in the other phone & you have no issues at all. This might be due to the actual equipment your carrier is using in the cell tower(s) you're close to, also the frequencies that gear is using might also be playing a part in your problems.
Click to expand...
Click to collapse
Yes, I was also thinking about it. It could be the combo of cell tower and S2 that are not liking each other that well.. And, if that's the case, I really hope that the issue can be resolved by switching modem drivers. I will have to do some what-ifings to nail this down now.
I like the other suggestion by HotrodHarry on trying out 2G only option - not the best way out but will help me in zeroing down on the cause.
So I receive my Telus S3 on release day, activated it, and had no problems (that I noticed, but I was connected to WiFi most of the time.)
Rooted it about a week later, and I can barely get service. Rather, I'll get a couple minutes of connectivity, then it'll disappear for 5-10 minutes. It's not a corrupted IMEI, like this thread is discussing. I've since flashed a stock Telus rom on the phone, and I still have the same problems.
We have low LTE availability in the area, so I thought that may be the problem, but the same thing happens with setting GSM or HSPA in the network settings.
LastCenturion said:
So I receive my Telus S3 on release day, activated it, and had no problems (that I noticed, but I was connected to WiFi most of the time.)
Rooted it about a week later, and I can barely get service. Rather, I'll get a couple minutes of connectivity, then it'll disappear for 5-10 minutes. It's not a corrupted IMEI, like this thread is discussing. I've since flashed a stock Telus rom on the phone, and I still have the same problems.
We have low LTE availability in the area, so I thought that may be the problem, but the same thing happens with setting GSM or HSPA in the network settings.
Click to expand...
Click to collapse
Sounds like a pretty curious case... have you uncovered any causes / solutions yet? Also, before you flashed back to the stock Telus rom, what were you using?
I have a similar issue happening also on my rooted telus phone. I rooted it the day I got it so I cant confirm on how it was before. It is running a stock ROM/kernel. What happens to me is my service will drop from 3 or 4 bars to no service or will show 1 bar but be unable to get any service anyways. Im not in an LTE area but I am in a dc-hspa+ area. Is this what happens to you as well?
The only fix I've found is wait 5-10 min for it to come back.
I'm using the Nokia 7.1 in the USA with T-Mobile. Things had been working great until the OTA update to version 9 happened a few days ago.
Now, the phone is extremely picky about its cellular connection. I'll have almost full bars in my house, and then nothing as I walk around. At work, I had no service until I walked a half-mile to the T-Mobile store - then I had a good signal.
Experimenting with the basic mobile/wifi settings hasn't helped (enhanced 4G - LTE, Auto wifi connection, etc).
Is anyone else experiencing this? Does anyone have a solution?
Thanks!
Not that I have experience. I have TMO as well and signal both indoors and outside seem normal. Granted, I got the phone and immediately updated to pie so I don't have a reference before updating to pie. Did you try a network reset to see if that corrects your issue?
alc2077 said:
Not that I have experience. I have TMO as well and signal both indoors and outside seem normal. Granted, I got the phone and immediately updated to pie so I don't have a reference before updating to pie. Did you try a network reset to see if that corrects your issue?
Click to expand...
Click to collapse
Thanks for the suggestion! I tried it and tested today... It doesn't seem to have helped.
--- ignore ---
APN details....
Here are my APN details (sorry - I can't use http links yet).
My APN settings seem to differ from others that are using T-Mobile on 4G in the USA. But, I had no luck with setting things to match what I see here: support.t-mobile.com/docs/DOC-28990
imgur.com/a/ZsLfajQ
While I was capturing these, the signal went in and out. And, I'm within 30 feet of a 4G signal booster that I received today from T-Mobile.
I'll have to try resetting the phone and ignoring the Pie update if I can't get this fixed.
a9hater said:
Here are my APN details (sorry - I can't use http links yet).
My APN settings seem to differ from others that are using T-Mobile on 4G in the USA. But, I had no luck with setting things to match what I see here: support.t-mobile.com/docs/DOC-28990
imgur.com/a/ZsLfajQ
While I was capturing these, the signal went in and out. And, I'm within 30 feet of a 4G signal booster that I received today from T-Mobile.
I'll have to try resetting the phone and ignoring the Pie update if I can't get this fixed.
Click to expand...
Click to collapse
How old is your sim from TMobile? Maybe a new one might help.
blushrts said:
How old is your sim from TMobile? Maybe a new one might help.
Click to expand...
Click to collapse
It's a brand new SIM (picked it up when I got the phone). Also, the problem seems very reproducible (where I lose connectivity) so I don't think the SIM is loose or has a bad connection.
But, the phone refuses to join the TMobile network (and won't even roam). Oddly, I'll often see the 'emergency calls only' message.
Things seemed to be working fine with Oreo, and then got bad with Pie.
If I do a factory reset, I'll just get a clean Pie installation now (as I understand).
Is there a [easy] way to reset and downgrade to how it shipped?