hi bro
got an new unlocked s3
originally it was orange branded s3 from uk and it was unlocked and rooted for use in india
since i wanted to remove the branding i flashed the unbranded firmware from this thread using mobile odin from sd card
http://forum.xda-developers.com/showthread.php?t=1646610
now when the fone restarted hell broke loose
my sim was locked saying i need to enter some code to unlock my fone
felt literally like cryin after doing such a blunder..would hv been better off with the orange splash screen
please help
thanks in advance
pradeep
Hi there. I just took a look at the firmware you flashed and seen the problem straight away.
I9300XXBLH1 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLH1 (4.0.4)
Region Europe
Country: Nordic Countries
Carrier: Unbranded
Build Date: 31 July 2012
Modem: XXLH1
CSC: NEEBLH1
Change List: 928452
Notice above that the region says Europe. And for it to work on Indian Networks it needs to be an Indian Unbranded firmware.
So the reason it because of the Region you downloaded was not the one needed.
I would advice either going back to the firmware you had before, or finding an Indian Official Firmware mate.
Hope this has helped
pradeeprox said:
hi bro
got an new unlocked s3
originally it was orange branded s3 from uk and it was unlocked and rooted for use in india
since i wanted to remove the branding i flashed the unbranded firmware from this thread using mobile odin from sd card
http://forum.xda-developers.com/showthread.php?t=1646610
now when the fone restarted hell broke loose
my sim was locked saying i need to enter some code to unlock my fone
felt literally like cryin after doing such a blunder..would hv been better off with the orange splash screen
please help
thanks in advance
pradeep
Click to expand...
Click to collapse
Don't panic I have been there and done that.
You should be able to not enter a code and still use the phone offline. If you can do that you should be able to access the functions and see if the ROM is rooted, if it isn't grab yourself a copy of the toolkit http://forum.xda-developers.com/showthread.php?t=1703488 and use it to root the ROM. Once you have done that you will be able to access root functionality and allow you to run applications such as http://forum.xda-developers.com/showthread.php?t=1846451&highlight=voodoo
Good luck ROM warrior. hopefully you will unlock your device and join us in the promised land.
Personally I got fed up of that shift a while ago so i started buying unbranded phones.
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
donsimmi said:
Hi there. I just took a look at the firmware you flashed and seen the problem straight away.
I9300XXBLH1 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLH1 (4.0.4)
Region Europe
Country: Nordic Countries
Carrier: Unbranded
Build Date: 31 July 2012
Modem: XXLH1
CSC: NEEBLH1
Change List: 928452
Notice above that the region says Europe. And for it to work on Indian Networks it needs to be an Indian Unbranded firmware.
So the reason it because of the Region you downloaded was not the one needed.
I would advice either going back to the firmware you had before, or finding an Indian Official Firmware mate.
Hope this has helped
Click to expand...
Click to collapse
Yea thats just the first one in the Thread if you actually scrolled down you would find many more stock ROMS. one of which he probably flashed.
ALSO if you want to go back to the Orange branded ROM then check out this post and scroll down
http://forum.xda-developers.com/showpost.php?p=26530809&postcount=7
thanks a million for the prompt response and understanding my plight
it was the second day with the new fone ...
my whole family was excited abt s3 and i end up with bricking and locking the fone
i`m downloading the toolkit now
will root first then
and i`m going to unlock wit galaxsim...
will keep u posted
thanks again
i hav done it
thanks a million for the help rendered ..
i hav successfully rooted and unlocked my phone
still have some doubts
since am usin a stock firmware ...I9300XXBLG8
can i start flashing custom roms since i don hav warranty anyways ?
will my fone get locked to orange anytime in the future ?
donsimmi said:
Hi there. I just took a look at the firmware you flashed and seen the problem straight away.
I9300XXBLH1 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLH1 (4.0.4)
Region Europe
Country: Nordic Countries
Carrier: Unbranded
Build Date: 31 July 2012
Modem: XXLH1
CSC: NEEBLH1
Change List: 928452
Notice above that the region says Europe. And for it to work on Indian Networks it needs to be an Indian Unbranded firmware.
So the reason it because of the Region you downloaded was not the one needed.
I would advice either going back to the firmware you had before, or finding an Indian Official Firmware mate.
Hope this has helped
Click to expand...
Click to collapse
Hi ..Just to let you know that is not true.... I live in Zimbabwe (Southern Africa) were the firmware is XEF.... I am using BTU british firmware in Africa without any problem and getting british updates. I know a lot of people who use all sorts of different country versions in their country... As long as your rom version matches your csc it will be fine. If it doesnt then one can manually change the csc and get official updates of the new firmware version.
Cheers
---------- Post added at 07:46 PM ---------- Previous post was at 07:40 PM ----------
pradeeprox said:
i hav done it
thanks a million for the help rendered ..
i hav successfully rooted and unlocked my phone
still have some doubts
since am usin a stock firmware ...I9300XXBLG8
can i start flashing custom roms since i don hav warranty anyways ?
will my fone get locked to orange anytime in the future ?
Click to expand...
Click to collapse
Yes you can start flashing custom firmware......Wel by now you have learned how to unlock and root your phone so even if it gets locked in the future you will have the ANTIDOTE...
art_arev said:
Hi ..Just to let you know that is not true.... I live in Zimbabwe (Southern Africa) were the firmware is XEF.... I am using BTU british firmware in Africa without any problem and getting british updates. I know a lot of people who use all sorts of different country versions in their country... As long as your rom version matches your csc it will be fine. If it doesnt then one can manually change the csc and get official updates of the new firmware version.
Cheers
---------- Post added at 07:46 PM ---------- Previous post was at 07:40 PM ----------
Yes you can start flashing custom firmware......Wel by now you have learned how to unlock and root your phone so even if it gets locked in the future you will have the ANTIDOTE...
Click to expand...
Click to collapse
thanx bro..so wt if i wanted to change my firmware to indian and how shld i change my csc
tried that csc changer thru market but it failed ..i couldnt even type anything
as of now am happy with firmware..planning to wait for clean JB custom builds
Related
Now, I am using the CM7.1 ROM but the camera isn't work!!! I don't want to use the CM7.1 anymore and I want to flash the the original ROM(HK official ROM).How can I get the ROM and how to do that?
I want to know 'Is the way to flash original ROM same as flash CM7.1(put the CM7.1 into sdcard and setup)?'
Can anyone help me?
Yes. The process of flashing Stock ROM is same.
Here you can find the your Stock Rom/Official Firmware...
http://forum.xda-developers.com/showthread.php?t=1075278
I have read this post before.He did that by used Odin.He didn't put the ROM into sdcard.This is the point that I don't understand.
odin do it from ur pc/laptop
cwm do it from sdcard
different file types
just dont know will he update the telecom nz firmware or not ==
have been looking for a long long time...
You means I can follow him to flash the rom?
If I need the ZSKG2,do I need to download XXKG1 too?
(I can't find XXKG1 to download in his post...)
Just download ZSKI3 from the link above:
http://forum.xda-developers.com/showthread.php?t=1075278
This is quoted from the link above, to ease you off:
ZSKI3
Firmware info
PDA:ZSKI3
PHONE: XXKI3
Date: 23/09/2011
Android 2.3.5
TGY (Hong Kong): http://www.multiupload.com/LAWZ135UF3
ZSKI3 Stock Kernel: http://www.multiupload.com/RH5K6JPH44
Password: [email protected]
After that, follow the steps on "Flashing Firmware with Odin" from the post.
Now I just need to down the ROM of ZSKI3 and the kernel of ZSKI3?I don't need to comprehend the XXKI3?
No. You download the official kernel if you do not have a USB jig available to you and you want to remove the yellow triangle at boot.
If you have a USB jig, skip the kernel.
Just download the big ROM file then flash it in the PDA section of Odin. It will automatically flash ZSKI3's firmware, modem and CSC into your phone.
Sent from my GT-I9100 using XDA App
Thank you so much~ I also live in HK~
same
10chars
Trying to flash stock HK firmware since encountering a boot loop
Sorry for posting in this old thread but I didn't feel comfortable starting a new thread. Hope everyone doesn't mind!
I am trying to deal with a boot loop error and wanted to get the official stock HK firmware. I didn't prep for this unexpected error properly but I don't have any info I can check under settings since I cannot get back into the main menu.
I got my phone in HK but I took it home to be on a Canada provider. I got it around Nov 2011. I am sure I had Gingerbread and I think it might have been Android 2.3.5. I DID NOT have any custom rom on my device to begin with.
I'm trying to find the difference between official firmware ZSKG2 and ZSKI3 and which one I should get. Does anyone have any insights?
Does anyone also know where I can get it?
The files became non-existent on this page:
http://forum.xda-developers.com/showthread.php?t=1075278
www.samfirmware.com. register for free. Then enter your phone details, and you can get all stock roms.
Sent from my GT-I9100 using Tapatalk 2
Thanks Spiralzz! I was on the samfirmware site before without registering and I cannot find anything that matches Gingerbread. The matches I found are all Android ver 4.
I will try that and if I have any questions, I will come back on this thread.
---------- Post added at 02:59 PM ---------- Previous post was at 02:31 PM ----------
Hey Spiralzz - I am on samfirmware and I cannot find lower than ver 4 for Android
I keyed in
Model: GT-9100 Samsung Galaxy S2
Country: Hong Kong - TGY
But it only had
Country/Carrier Date Android PDA CSC
Hong Kong 2012 August 4.0.4 I9100ZSLPP I9100OZSLPP
Hong Kong 2012 April 4.0.3 I9100ZSLPG I9100OZSLPG
Hong Kong 2012 March 4.0.3 I9100ZSLPE I9100OZSLPE
Hong Kong 2012 March 4.0.3 I9100ZSLPE I9100OZSLPE
I'm looking for the stock version I originally had, which should be Gingerbread. Would it still be okay if I used any of the above?
I was following the instructions under this thread:
[READ THIS] Got a Boot Loop? Don't post a New Thread!
http://forum.xda-developers.com/show....php?t=1108499
Thank you all!!
I figured it all out! I got out of boot loop! No need for response. Sorry for spamming everyone...
Just wanted to say:
This page helped me to do it. I gave appropriate thanks!
[GUIDE] Fix an unflashable or soft bricked GSII (I9100G/M/P/T VERSION INCLUDED!)
http://forum.xda-developers.com/showthread.php?t=1457458&page=1
So I recently bought Samsung Galaxy S2, coming from iPhone it's quite tricky when it comes to firmwares. My phone is the I9100G white model and I accidentally tried to flash the I9100 ICS firmware update.. But after researching on the net I was able to flash it back to the GingerBread firmware via Odin software. My query is that will I be able to get and install official firmwares from Samsung or not directly through KIES, if not than how can I shift back to the original firmware for my device which would work on KIES update.. Lastly has ICS been released for I9100G model as yet or not??? Your help would be much appreciated..!!
ics has not yet been released for the original firmware 9100g need to know from which country the sgs2
It's a UK Handset!
alberto 63 said:
ics has not yet been released for the original firmware 9100g need to know from which country the sgs2
Click to expand...
Click to collapse
I bought the unlocked international version of SGS2.. I also wanted to know how to find out which country is my phone from although the seller claims that it's a UK handset.. If there is a way to find out do let me know... Thanks!!
ifti_q said:
I bought the unlocked international version of SGS2.. I also wanted to know how to find out which country is my phone from although the seller claims that it's a UK handset.. If there is a way to find out do let me know... Thanks!!
Click to expand...
Click to collapse
I9100 SGS2 is international version and doesn`t matter from which country you bought
I9100G isn't distributed by any of the networks in the UK or even sold direct by any major retailer (well, maybe one). You should be able to check your IMEI somewhere like here to see where it's from.
ROM
Can you recommend any other custom ROM for I9100G model.. I have come across many ROMs for the I9100 but not the I9100G one..
ifti_q said:
I bought the unlocked international version of SGS2.. I also wanted to know how to find out which country is my phone from although the seller claims that it's a UK handset.. If there is a way to find out do let me know... Thanks!!
Click to expand...
Click to collapse
If you haven't flashed custom ROMs or updated your firmware yet, your build number in the About Phone screen will (sort of ) tell you. It's a code that can be deciphered.
What is the build number?
type keyboard *2767*4387264636#
Build Number..
ctomgee said:
If you haven't flashed custom ROMs or updated your firmware yet, your build number in the About Phone screen will (sort of ) tell you. It's a code that can be deciphered.
What is the build number?
Click to expand...
Click to collapse
My phone's build number is GINGERBREAD.XWLA1
KERNEL: 2.6.35.7 [email protected]#2
ifti_q said:
My phone's build number is GINGERBREAD.XWLA1
KERNEL: 2.6.35.7 [email protected]#2
Click to expand...
Click to collapse
XW is a generic Europe code that could be many countries (Austria, Belgium, France, Germany, Hungary, Italy, Nordic, Spain, United Kingdom).
LA1 means it was build 1 in January of 2012.
I believe you can further narrow down what country by finding your CSC by typing *#1234# into your dialer.
is india or bangladesh
I think you should be able to flash through Kies when you revert to the stock ROM. Here is a list of official I9100 firmware, I guess you could find yours in there.
JohnnySM said:
I think you should be able to flash through Kies when you revert to the stock ROM. Here is a list of official I9100 firmware
Click to expand...
Click to collapse
He has an I9100G
I9100G no I9100
---------- Post added at 09:43 PM ---------- Previous post was at 09:41 PM ----------
I9100GXWLA1 2.3.6 2012 January I9100GODDKL1 Bangladesh
Sorry. Made an a** of myself . My bad.
I missed in the first post of the thread where he said he flashed back to a stock firmware, so my suggestion was voided, since it was no longer the original firmware that shipped with his phone.
ctomgee said:
I missed in the first post of the thread where he said he flashed back to a stock firmware, so my suggestion was voided, since it was no longer the original firmware that shipped with his phone.
Click to expand...
Click to collapse
Yea exactly, thats what i want to know how can you revert back to the original firmware that would work with KIES..
Sent from my GT-I9100G using XDA
Two options.
1) Original firmware that came with phone; search for said firmware on Samfirmware.com, flash according to any instructions they have for flashing firmware downloaded from their site.
2) Latest stock firmware you'd normally get via Kies; get the PC version of Checkfus (search for it on XDA/Google). This will allow you to download the latest firmware for your phone/carrier/country that you'd normally get via Kies (might be the same firmware which came with the phone, depends on whether carrier has pushed a firmware update since or not). Flash this firmware you download following the instructions in Intratech's firmwares threads on here.
ifti_q said:
Yea exactly, thats what i want to know how can you revert back to the original firmware that would work with KIES..
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
Sorry if this question was asked b4 but I think my situation is a little different but if it is not I beg your pardon and patience :angel:
I am based in Australia and I am with Telstra -- I bought a Galaxy S2 almost 10 months ago from a company based in Singapore on Ebay.
The handset's motherboard fried after one month -- in Australia they could not repair it as it was bought overseas. I returned the handset to Singapore and after 8 months they returned it back to me. It's working now. I won't go in any further details about the ebay transaction which was a nightmare.
Long story short I now have a S2
PDA: I9100XWKI4
PHONE I9100XXKI1
CSC I9100OJCKI1
Android version 2.3.4
Baseband version I9100XXKI1
Kernell version 2.6.35-7-I9100XWKI4-CL575468 [email protected]#2
I have hooked up on Kies which said no update was available. . . perhaps because the CSC is South African I am in Australia?
Given that I am in Australia what's the best way to upgrade to a stock version of ICS?
Thanks in advance :angel:
Flash any ICS you like from intratech thread. Your pohone has no exception i can see
Sent from my GT-I9100 using Tapatalk 2
xdoomed said:
Sorry if this question was asked b4 but I think my situation is a little different but if it is not I beg your pardon and patience :angel:
I am based in Australia and I am with Telstra -- I bought a Galaxy S2 almost 10 months ago from a company based in Singapore on Ebay.
The handset's motherboard fried after one month -- in Australia they could not repair it as it was bought overseas. I returned the handset to Singapore and after 8 months they returned it back to me. It's working now. I won't go in any further details about the ebay transaction which was a nightmare.
Long story short I now have a S2
PDA: I9100XWKI4
PHONE I9100XXKI1
CSC I9100OJCKI1
Android version 2.3.4
Baseband version I9100XXKI1
Kernell version 2.6.35-7-I9100XWKI4-CL575468 [email protected]#2
I have hooked up on Kies which said no update was available. . . perhaps because the CSC is South African I am in Australia?
Given that I am in Australia what's the best way to upgrade to a stock version of ICS?
Thanks in advance :angel:
Click to expand...
Click to collapse
try to search on xda for a stock ICS firmware meant for australia and flash the same and see
You could try Samfirmware.com and get a recent Aussie rom and flash that.
You need to register to download.
HTH
Sent from my GT-N7000 using xda app-developers app
...
MistahBungle said:
Or get the PC version of Checkfus & download the latest Telstra or unbranded AU ICS stock firmware. Flash the package you download with it following the instructions here.
Click to expand...
Click to collapse
Thx mate -- I was able to find the Telstra ICS and unzipped the file I9100TDVLP4_I9100TTELLP2_I9100TDVLP3_HOME.tar.md5. From the Odin instruction I should have different files up upload. Also Odin 1.85 does not have an OPS window for the One package update. Any help would be appreciated
...
MistahBungle said:
Flash the tar.md5 in the PDA section of Odin. You don't need the .dll (if there is one). I flashed a Voda stock rom from Checkfus successfully last weekend.
Edit - It takes a while to flash because of the size of the package/telco bloat, so be patient & make sure you let it complete/reboot.
Click to expand...
Click to collapse
All done -- thx mate -- the Telstra ROM was crap, it has so much stuff I don't need so I went for the unbranded ROM and it's pretty good and stable.
...
vitiaMe annual
MistahBungle said:
Good man No wuckers.
Click to expand...
Click to collapse
Hey I wanted to thank everyone who contributed to my post and helped -- you're all champs :good:
Till next time . . .
Hey guys,
I have a New Zealand Samsung S3 GT-I9300.
It's got no branding on the phone, no logos, no logos on startup etc and I didn't buy it from a Telecom, 2 Degrees, or Vodafone store so I assume its unlocked. I bought if from an electronic store called **** Smith.
It's on the Telecom network - just chucked in my Telecom SIM.
OS - 4.0.4
AP - 19300XXALF2
CP - 19300XXLF2
CSC - 19300NZCALF1
At the moment when I plug the phone into Kies, it gives me the message "Your device's current firmware version is not supported to firmware via Kies".
After doing some research and troubleshooting steps like making sure Kies is up to date, reinstalling drivers etc I saw that some people said that if your CSC is wrong Kies won't upgrade your phone.
I realised that Jellybean hasn't been released for NZ yet but I figure that Kies should be saying something along the line of 'You have the latest firmware..' instead of saying its not supported.
So I was just wondering if my CSC looks fine for an unlocked NZ S3.
Let me know if you need any more information.
Cheers
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Taubin said:
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Click to expand...
Click to collapse
Thanks for your reply and advice
My phone isn't rooted.
BTU is UK right?
Couldn't I just change the CSC instead of flashing another ROM?
This will void warranty right? Don't really mind but just wondering out of curiosity.
Cheers
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Taubin said:
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Click to expand...
Click to collapse
Thanks for that!
I'll give that a go.
Thanks
Just by coincidence my phone updated to Jellybean 4.1.1 via OTA a few days ago without me having to flash another stock ROM on it.
Also, Kies now reports that I have the latest firmware.
Looks like all I had to do was be a bit more patient.
Everything seems to be in order now.
Cheers for your help anyway guys.
Hi guys,
Im thinking of going back to stock firmware and stock recovery file.
The problem is that im trying to find the samsung's stock firmware (4.1.2).
i found these over at sammobile.com :
Country/Carrier Date Android PDA CSC Download Unlock Info
Cyprus (Cytamobile Vodafone) 2013 January 4.1.2 I9300XXELLA I9300OXXELL1 Download Unlock Info
Cyprus (Cytamobile Vodafone) 2012 December 4.1.2 I9300XXELL4 I9300OXXELK4 Download Unlock Info
I don't know if these are the correct ones please advice. Also which of them i should use in case these are the correct ones?
Furthermore from what i understand and correct me f i am wrong , these firmwares appear to have some kind of simlock on them ?
My phone was bought from the specific carrier as shown above (cytamobile vodafone) but the phone doesn't have any kind of simlock on it so im not sure that the above 2 links i found are correct.
im looking forward for your help
thank you
subfire91 said:
Hi guys,
Im thinking of going back to stock firmware and stock recovery file.
The problem is that im trying to find the samsung's stock firmware (4.1.2).
i found these over at sammobile.com :
Country/Carrier Date Android PDA CSC Download Unlock Info
Cyprus (Cytamobile Vodafone) 2013 January 4.1.2 I9300XXELLA I9300OXXELL1 Download Unlock Info
Cyprus (Cytamobile Vodafone) 2012 December 4.1.2 I9300XXELL4 I9300OXXELK4 Download Unlock Info
I don't know if these are the correct ones please advice. Also which of them i should use in case these are the correct ones?
Furthermore from what i understand and correct me f i am wrong , these firmwares appear to have some kind of simlock on them ?
My phone was bought from the specific carrier as shown above (cytamobile vodafone) but the phone doesn't have any kind of simlock on it so im not sure that the above 2 links i found are correct.
im looking forward for your help
thank you
Click to expand...
Click to collapse
you ain't having a nandroid from your original ROM?
If not, choose the most up-to-date one for your carrier, phone and region and flash it, that's it I guess.
Remember though, to reset counter (if it is not still 0), if you want to send it back to service.
chrismast said:
you ain't having a nandroid from your original ROM?
If not, choose the most up-to-date one for your carrier, phone and region and flash it, that's it I guess.
Remember though, to reset counter (if it is not still 0), if you want to send it back to service.
Click to expand...
Click to collapse
Hi,
yes i have a nanodroid.
Is there any possibilty when i apply these stock firmwares , my phone to simlock ?
What is the difference between these two firmwares XXELLA and XXELL4?
Thank you
subfire91 said:
Hi,
yes i have a nanodroid.
Is there any possibilty when i apply these stock firmwares , my phone to simlock ?
What is the difference between these two firmwares XXELLA and XXELL4?
Thank you
Click to expand...
Click to collapse
If you got a nandroid and you want to go back to stock, why not flash this one?
As your link shows, ELLA is newer than ELL4
No need to download anything on your own. Follow the thread.
http://forum.xda-developers.com/showthread.php?t=2088809
Sent from my GT-N7100 using xda premium
What is the reasoning behind you wanting to go back to stock?