Hello all together
I need flash PA v2.1 on my SGS 3 !
I have problems with the Galaxy S3 and WLAN simply gets no connection together!
I've already tried all possible steps like Stockrom flash with Odin to the bootloader from the Android 4.0.4 to get! Because it means that even if wifi is broken, you should flash back to flash and then stockrom Paranoid! Wifi can not connect!
I count times on what I've already done everything without success:
ICS 4.0.4 STOCK
wipe data
wipe chache
wipe Dalvik
Permission fix
Flash paranoidandroid
flash gapps jb
flash hw compressor
Wlan ist broken
Then I created a backup of it.
Have again flashed back to stock 4.0.4 ics because I had suspected at the bootloader.
Ics 4.0.4 on it again as everything was wiped and the backup recorded. Again the bow
Then cm 9 installed as described
there is also the wlan bug
from CM9 paranoidandroid
still wifi bug
then back to stock and on CM10
end result
wlan goes
paranoid then flashed wireless bug
then of stock on CM9 on from there and CM10 on paranoidandroid wlanbug
from CM10 by backup still wifi bug.
I just do not know how to fixxen it.
Would appreciate your help very
fix permission reboot
've Tried all sorts of variations but always without success
Please help I really been at a loss why ?!
Am grateful for every tip!
Try searching as there is a thread about a fix for wifi on gsg3. Also trying asking on the Paranoid Andrion Thread aswell to see if anyone has go a fix for it.
can you post pls link?
i cant find this sry
Caddyrn said:
can you post pls link?
i cant find this sry
Click to expand...
Click to collapse
Twenty posts down from this post .
jje
Related
Hey guys, posted a thread the other day. But didn't get much of an answer. But now am back with a different question. Anyway, long story short. My girlfriend is a goose and swapped a perfectly good iPhone (wait what, how can an iphone be good - i know, i know) for a samsung galaxy s2. It kept turning off and wifi doesnt work.
I done an update to 4.0.3 using odin and that stopped the constant turning off, but wifi is still not working.
Now what I would like to know it, if i change the modem firmware in it, will it fix it ? Could I just try different firmwares until I works ? Would downgrading to say 2.2 possibly fix the issue ? (It was originally 2.3.5)
Please help, if you need information, just post and ill reply )
joshystevo said:
Hey guys, posted a thread the other day. But didn't get much of an answer. But now am back with a different question. Anyway, long story short. My girlfriend is a goose and swapped a perfectly good iPhone (wait what, how can an iphone be good - i know, i know) for a samsung galaxy s2. It kept turning off and wifi doesnt work.
I done an update to 4.0.3 using odin and that stopped the constant turning off, but wifi is still not working.
Now what I would like to know it, if i change the modem firmware in it, will it fix it ? Could I just try different firmwares until I works ? Would downgrading to say 2.2 possibly fix the issue ? (It was originally 2.3.5)
Please help, if you need information, just post and ill reply )
Click to expand...
Click to collapse
the modem or baseband is nowhere related to ur wifi issue ma8 for that u have 2 change the kernel and see u can try SIYAH, Thoravukk or Fluxi kernel and see it might resolve ur wifi issue
Sun90 said:
the modem or baseband is nowhere related to ur wifi issue ma8 for that u have 2 change the kernel and see u can try SIYAH, Thoravukk or Fluxi kernel and see it might resolve ur wifi issue
Click to expand...
Click to collapse
Hey, thanks for a quick reply. Oh I see, (I am very new to this )
Could you please link me to where I can get these kernals ? Thanks !
Sun90 said:
the modem or baseband is nowhere related to ur wifi issue ma8 for that u have 2 change the kernel and see u can try SIYAH, Thoravukk or Fluxi kernel and see it might resolve ur wifi issue
Click to expand...
Click to collapse
Im assuming you've tested the router with other devices to eliminate that? It sounds as though the warranty is already void so it could be a good excuse to root & install cwm5 if you haven't already. Like was already mentioned wifi is kernel related so i would recommend installing a recently released aokp (preferred) based rom with whatever kernel is provided. If you're still having the problem try installing different kernels from there on in. Remember to flash a kernel cleaning script before flashing the new kernel. If the problem persists it could be hardware related. Good luck bud !
gr8ednz said:
Im assuming you've tested the router with other devices to eliminate that? It sounds as though the warranty is already void so it could be a good excuse to root & install cwm5 if you haven't already. Like was already mentioned wifi is kernel related so i would recommend installing a recently released aokp (preferred) based rom with whatever kernel is provided. If you're still having the problem try installing different kernels from there on in. Remember to flash a kernel cleaning script before flashing the new kernel. If the problem persists it could be hardware related. Good luck bud !
Click to expand...
Click to collapse
Yep, the wifi just doesnt turn on at all. switch to on, and it switches off straight away. Is CWM5 (clock work mode ) If so I have that. Could you please link me to a aokp based rom. I'm sorry for being a hassel, just very new and hoping to get this issue cleared up asap, because it is a great phone. Also confused as to flashing a kernal cleaning script ??
joshystevo said:
Yep, the wifi just doesnt turn on at all. switch to on, and it switches off straight away. Is CWM5 (clock work mode ) If so I have that. Could you please link me to a aokp based rom. I'm sorry for being a hassel, just very new and hoping to get this issue cleared up asap, because it is a great phone. Also confused as to flashing a kernal cleaning script ??
Click to expand...
Click to collapse
for siyah kernel link below
downld the zip file under ver 3.3.1 and flash the same thro CWM after putting the file into ur internal sdcard
http://www.gokhanmoral.com/
for thoravukk link below
http://forum.xda-developers.com/showthread.php?t=1574672
Sun90 said:
for siyah kernel link below
downld the zip file under ver 3.3.1 and flash the same thro CWM after putting the file into ur internal sdcard
http://www.gokhanmoral.com/
for thoravukk link below
http://forum.xda-developers.com/showthread.php?t=1574672
Click to expand...
Click to collapse
Thanks. Do I have to do anything to my firmware, or just straight up put the kernel on ?
joshystevo said:
Yep, the wifi just doesnt turn on at all. switch to on, and it switches off straight away. Is CWM5 (clock work mode ) If so I have that. Could you please link me to a aokp based rom. I'm sorry for being a hassel, just very new and hoping to get this issue cleared up asap, because it is a great phone. Also confused as to flashing a kernal cleaning script ??
Click to expand...
Click to collapse
No hassle m8 only problem is im on my touchpad so can't send you links. From xda enter i9100 (device) go android development then look for resurrection remix 2.2 Download file place it in downloads "internal" (easy to find) then boot into clockwork recovery. Firstly make sure you backup current rom! After that's done follow these instructions carefully.
Wipe data/Factory reset
Wipe cache
(from advanced) Wipe dalvik cache/battery stats
(from mounts/storage) format cache/data/system
Go to 'install zip from sd card'
Go to 'choose zip from internal'
Install 'resurrection remix'
Reboot then setup Google accounts etc.... Then reboot again & wait 5 mins.
As for kernel cleaning script try this 1st then see how you go.. I'm off to bed m8 good luck with everything!
hello,
i have a strange wifi issue on my s3.
when i flash cm10.1 the phone keeps searhing for ip-adress.
when i flash paranoidandriod i have the same wifi issue.
then i go back to a 4.2.2 leak the wifi is working well, also on a 4.1.2 the wifi is working.
but i still wanna use paranoid andriod:crying: i like it so much.
i have tried serveval system format, factory resets. data wipes, flashed rom with odin.
does anybody have a solution for this?
regards mike,
Hey Mike
you should post at the PA q&a thread..
kiyamizio said:
hello,
i have a strange wifi issue on my s3.
when i flash cm10.1 the phone keeps searhing for ip-adress.
when i flash paranoidandriod i have the same wifi issue.
then i go back to a 4.2.2 leak the wifi is working well, also on a 4.1.2 the wifi is working.
but i still wanna use paranoid andriod:crying: i like it so much.
i have tried serveval system format, factory resets. data wipes, flashed rom with odin.
does anybody have a solution for this?
regards mike,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2245408
Try this see if it helps also its better to use WiFi folder from a newer Samsung ROM that worked for you
Hello Team,
I have been a silent follower of this website and have rooted my SGSII 6 months ago. Everything was working absolutely fine with no problems.
Very recently I upgraded my build to 4.2.2 JDQ39 with Kernel Version: 3.0.64-CM. My wireless is not working at all. I am not even able to turn on the wifi option.
I tried installing the below ROMs to check the functionality:
ThinkingBridge
Paranoid
Resurrection.
None of the above worked.
I'd request anyone in this thread to give me a workaround or a solution to fix this thing.
Thank you
Harry
Harry_xdad said:
Hello Team,
I have been a silent follower of this website and have rooted my SGSII 6 months ago. Everything was working absolutely fine with no problems.
Very recently I upgraded my build to 4.2.2 JDQ39 with Kernel Version: 3.0.64-CM. My wireless is not working at all. I am not even able to turn on the wifi option.
I tried installing the below ROMs to check the functionality:
ThinkingBridge
Paranoid
Resurrection.
None of the above worked.
I'd request anyone in this thread to give me a workaround or a solution to fix this thing.
Thank you
Harry
Click to expand...
Click to collapse
Anyone in this forum has experienced this issue before me? Please advice.
Do a clean (format everything in CWM first, then use Odin) install of stock & see if the problem persists. Tho you've tried these other roms, you might have left something funky behind from one of them (just doing a wipe may not get rid of this) that has persisted.
If you have no problems with stock, try another install of the custom rom of your choice & see how you go.
Or maybe even try a completely different kernel before you do the stock thing. Try Siyah/Dorimanx maybe ?
MistahBungle said:
Do a clean (format everything in CWM first, then use Odin) install of stock & see if the problem persists. Tho you've tried these other roms, you might have left something funky behind from one of them (just doing a wipe may not get rid of this) that has persisted.
If you have no problems with stock, try another install of the custom rom of your choice & see how you go.
Or maybe even try a completely different kernel before you do the stock thing. Try Siyah/Dorimanx maybe ?
Click to expand...
Click to collapse
Thank you MistahBungle Will try that and revert.
Harry_xdad said:
Thank you MistahBungle Will try that and revert.
Click to expand...
Click to collapse
I flashed Official Samsung Firmware 4.1.2 on my GS2 using Odin but still the problem persists.
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
srchandran_72 said:
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
Click to expand...
Click to collapse
just flash the cm10.2 build if you've root n have installed cwm,
nasheich said:
just flash the cm10.2 build if you've root n have installed cwm,
Click to expand...
Click to collapse
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
srchandran_72 said:
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
Click to expand...
Click to collapse
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
nasheich said:
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
Click to expand...
Click to collapse
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
srchandran_72 said:
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
Click to expand...
Click to collapse
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
nasheich said:
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
Click to expand...
Click to collapse
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
srchandran_72 said:
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2
that should be the thread for your device
and for posting in a thread(speciallly in the dev thread), you must at least have more than 10 posting in whole xda thread
in general thread, you can post even you didn't have 10+ posting
please read the Rules of Xda for more detail about posting and everything
Hi guys,
This is my first time posting a thread in here. I need your help.
My phone is Samsung Galaxy S2 i9100.
Baseband version: I9100XXKI3
(screenshots attached for more info)
I rooted my phone By using Odin3-v1.85. and flashed the recovery to cwm 5.x (i can't remember version) and tried to install custom ROM OMNI
(omni-5.0.2).
I accidently downloaded and installed OMNI for i9100G version. But my phone is i1900 version.
(I downloaded this omni-5.0.2-20141222-i9100g-HOMEMADE.zip ). i forgot to backup previous ROM .
Then i was unable to Turn ON my phone because every time i turn it on, it come back to recovery it self (it's a bootloop i think).:crying::crying:
then i flashed the recovery to CWM-KitKatCompatible-i9100 (version 6.0.2.7) and installed custom ROMs and tried (PACMAN,CM,AICP).
It works fine. everything is just perfect. But i can't make calls or receive.
It says "Mobile Network not available". when i call my phone from another phone i hear ringing it. But nothing shows in my phone. after few seconds i got a Missed call Alert. But this happens only sometimes. All the other times. i cannot call it from another phone.
I tried reset and flash modem using CWM as well as from odin. but no luck.
Please Friends Help me. I don't know whether i put this thread to right section or not. sorry about that.
I did all of these things by surfing XDA forum (as a Guest). And i'm happy about what you guys are doing. Keep it up.:good::good:
(sorry for bad english)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
code-3h said:
Hi guys,
This is my first time posting a thread in here. I need your help.
My phone is Samsung Galaxy S2 i9100.
Baseband version: I9100XXKI3
(screenshots attached for more info)
I rooted my phone By using Odin3-v1.85. and flashed the recovery to cwm 5.x (i can't remember version) and tried to install custom ROM OMNI
(omni-5.0.2).
I accidently downloaded and installed OMNI for i9100G version. But my phone is i1900 version.
(I downloaded this omni-5.0.2-20141222-i9100g-HOMEMADE.zip ). i forgot to backup previous ROM .
Then i was unable to Turn ON my phone because every time i turn it on, it come back to recovery it self (it's a bootloop i think).:crying::crying:
then i flashed the recovery to CWM-KitKatCompatible-i9100 (version 6.0.2.7) and installed custom ROMs and tried (PACMAN,CM,AICP).
It works fine. everything is just perfect. But i can't make calls or receive.
It says "Mobile Network not available". when i call my phone from another phone i hear ringing it. But nothing shows in my phone. after few seconds i got a Missed call Alert. But this happens only sometimes. All the other times. i cannot call it from another phone.
I tried reset and flash modem using CWM as well as from odin. but no luck.
Please Friends Help me. I don't know whether i put this thread to right section or not. sorry about that.
I did all of these things by surfing XDA forum (as a Guest). And i'm happy about what you guys are doing. Keep it up.:good::good:
(sorry for bad english)
Click to expand...
Click to collapse
You might need to reflash stock rom, then try flash custom rom again.
gsstudios said:
You might need to reflash stock rom, then try flash custom rom again.
Click to expand...
Click to collapse
Thanks it worked. :good::good::good::good:
I reflashed to stock rom and it's working fine.
But i tried to install custom Rom again but no luck there. I was again stuck with Mobile network problem.
May be the problem with kernal.
Any suggestions???
Mobile Network not available after Flashing to custom ROM
I'm also having same problem. I've flashed all the custom roms and mobile network is not working in all roms. Is there any idea to solve this problem then let me know??? please!!
Sudhamshu said:
I'm also having same problem. I've flashed all the custom roms and mobile network is not working in all roms. Is there any idea to solve this problem then let me know??? please!!
Click to expand...
Click to collapse
You will have to flash stock 4.1.2 rom or try a 4.1.2 custom rom. The problem may be caused by the drivers in the built in kernels but I'm not completely sure.
No mobile network on custom roms
I have already flashed the 4.1.2 jellybean rom but 4.1.2 rom also havr bugs. Lock screen doesn't work, I had tried hard resetting but it doesn't solve the problem. I Want use 5.0.2 hazy , cynogenmod, pacman , dirty unicorn, etc and other many custom roms but I'm facing same problem no mobile network, other than that everything work fine....
Sudhamshu said:
I have already flashed the 4.1.2 jellybean rom but 4.1.2 rom also havr bugs. Lock screen doesn't work, I had tried hard resetting but it doesn't solve the problem. I Want use 5.0.2 hazy , cynogenmod, pacman , dirty unicorn, etc and other many custom roms but I'm facing same problem no mobile network, other than that everything work fine....
Click to expand...
Click to collapse
You mean stock 4.1.2 rom? That's very weird for a 4.1.2 stock rom. Maybe an android 4.2 or 4.3 rom?
You are saying that I should try 4.2 or 4.3 custom rom??
code-3h said:
Thanks it worked. :good::good::good::good:
I reflashed to stock rom and it's working fine.
But i tried to install custom Rom again but no luck there. I was again stuck with Mobile network problem.
May be the problem with kernal.
Any suggestions???
Click to expand...
Click to collapse
use another baseband version. I use XXMS4 and I recomend it.
Sudhamshu said:
You are saying that I should try 4.2 or 4.3 custom rom??
Click to expand...
Click to collapse
Yep.
I am having same problem with the network connectivity. It happens with all custom ROMs that aren't stock based. I am stuck with Chameleon ROM which is a hybrid and has a stock samsung base. It is a great ROM but is outdated. I would like to upgrade. Any solution to this problem is welcomed. = D
Okay I think I got a solution here. The procedure is:
1) Make sure you are on a stock based ROM or other ROM where your network is working.
2) Backup EFS.
3) Flash custom ROM of your choice.
4) Restore EFS if there is no network.
Done.
To restore efs, you can use any app tailored to do so but for me it didn't work. I followed this thread:
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
Follow the steps carefully and you will have network in any ROM you like. Hit thanks if helped.
PS: Sorry for double post
EDIT 2: Even though my network is back, which confirms that the problem was with the missing IMEI. I found out that the IMEI I got now is a fake one. Got to get the real one back now..
i did flash android 10 in my moto one power
after that i went back to stock rom but noe netwrok is not showing up