Updating Firmware - Sprint HTC EVO 4G LTE

I'm on baseband 1.05.11.0606 with s-off, rooted, running MeanROM 4.2. H-boot is 1.12. What would be the best way to update my radios/firmware? I thought I had done this through the pj75img method but I guess something went wrong.
Sent from my EVO using xda app-developers app

You're right, just put the PJ75IMG.zip from this thread on your external sd card and then boot into the bootloader. It will auto detect the zip and ask if you want to install update. Just know that once you upgrade you're stuck on that version since downgrading has resulted in bricking for a lot of people.
http://forum.xda-developers.com/showthread.php?t=1859789
Sent from my EVO LTE

Best way is flashing the zip if you have s-off, otherwise its a hassle

So I can just download the file and installthe zip using twrp? Or just the use pj... method? Either is fine, would just grab the file without the hboot update.
Sent from my EVO using xda app-developers app

I don't think firmware can be flashed from recovery. PJ75IMG updates must be flashed by the bootloader.
Sent from my EVO LTE

premo15 said:
I don't think firmware can be flashed from recovery. PJ75IMG updates must be flashed by the bootloader.
Sent from my EVO LTE
Click to expand...
Click to collapse
Ok cool. Thats what I thought, just wanted to be sure. I'll download and give it a try tonight. Any reason why I'd want to downgrade firmware ever? Unless a ROM isn't compatible.

Never attempt to downgrade firmware, it can be done but its more risk then its worth. A lot of people bricked their lte trying to downgrade but that was an hboot problem. Still I don't feel its worth it to downgrade

Thanks. Didn't plan to downgrade but I see the warnings about not doing it so was trying to figure out why someone would have to. I figured that's what led to the discovery that downgrading was a bad thing.
Sent from my EVO using xda app-developers app

Well there are quite a few phones that have been exploited with a simple downgrade but I guess HTC did something because its pretty much a guaranteed brick. The only reason I could see to downgrade is ROM compatibility but all the ROMs are pretty much caught up and I don't think anyone ever actually managed to prove it was a legitimate fix

Downloaded and just flashed and confirmed its updated. Just wanted to say thanks.
Sent from my EVO using xda app-developers app

Related

OTA update question

I was wanting to unroot this EVO 3d. Just making sure that its ok to take an OTA update on HTC unlock method once the update comes through. I couldn't find anything regarding if its ok to proceed once released.
Sent from my PG86100 using xda premium
Crap wrong place please move to Q&A thought I hit that.
Sent from my PG86100 using xda premium
If you are wanting to root:
Rule #1 - Do not take OTA updates. Always let a Dev check it out and post it up on the Dev Forum before updating. More times than not, you will lose root and receive an updated HBoot.
Wanting to unroot. I used HTC method to unlock bootloader wondering if this will cause an issue technically receiving an OTA update will unroot and set to stock OTA firmware, radio, data, Wimax, and hboot also stuff I missed but what will happen to an unlocked bootloader through HTC methods.
Sent from my PG86100 using xda premium
blazerboy567 said:
Wanting to unroot. I used HTC method to unlock bootloader wondering if this will cause an issue technically receiving an OTA update will unroot and set to stock OTA firmware, radio, data, Wimax, and hboot also stuff I missed but what will happen to an unlocked bootloader through HTC methods.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Reading comprehension this morning is not up to par yet. Sorry.
You may have to re-lock it to get OTA updates, "fastboot oem lock"
I was thinking that since the boot loader was the only thing effected by the HTC method it may not read the signature correctly for the OTA. I know the RUU has to have a lock signature for the hboot to ID the update or maybe nothin will happen and it will update fine.
Sent from my PG86100 using xda premium

When rebooting for the HTC Software update, it keeps taking me to Teamwin recovery.

What do I do?
Sent from my EVO using xda app-developers app
Are you trying to do a factory update on a rooted device? You cant if I'm not mistaken. You need to flash a Rom built for your device
Sent from my EVO using xda premium
slowfncar said:
Are you trying to do a factory update on a rooted device? You cant if I'm not mistaken. You need to flash a Rom built for your device
Sent from my EVO using xda premium
Click to expand...
Click to collapse
How do I flash it to stock? All I did was download a root program.
Sent from my EVO using xda app-developers app
Do not accept the OTA
Just flash any rom based on the OTA
Sent from my EVO using Tapatalk 2
premo15 said:
If you have TWRP instead of the stock recovery, then your bootloader is unlocked. You can only install the official OTA if you're locked and on the stock recovery. You'll need to use an RUU to get back to stock in order to accept the OTA, but you'll lose root. Some of the devs have cracked it and made the firmware available for flashing if you're unlocked. What's your reason for wanting to take the OTA if I may ask?
Sent from my EVO LTE
Click to expand...
Click to collapse
I want wallet to work without modifications, and I need the WiFi issue fixed. Last time I tried the RUU, it still kept TeamWin on the phone. At least, I think.
AnonSVN said:
I want wallet to work without modifications, and I need the WiFi issue fixed. Last time I tried the RUU, it still kept TeamWin on the phone. At least, I think.
Click to expand...
Click to collapse
The RUU will write the stock recovery and ROM onto the phone, so it looks like that didn't work for you.
If you want wallet working, flash a ROM based on the new OTA. I would suggest either MeanROM or Viper4G. Unrooting to take the OTA is never the correct option.
Meanrom is the way to go if you want the wallet to work as it should, mikey has posted good instructions in his thread
sent from my tranquilized lazzy jewel
They both work
Sent from my EVO using xda premium
mrlakadaddy said:
They both work
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Did you really just bump this eon-old thread?
You never stated it was resolved, was just trying to help, but, nevermind
Sent from my EVO using xda premium

Rooted with 1.12 bootloader. Best way to s-off and flash MeanROM ICS.

Background info:
I remember rooting my wife's EVO 4G LTE and it installed superuser automatically and for some reason...I can't remember which method I used. Bootloader screen now says TAMPERED. I'm on 1.12 bootloader and 1.13 software.
But now, I would like to install MeanROM.
I really don't have the time to read through a lot of the forums like before since I have a 2yr old and newborn to help take care of.
Questions:
1) Do I need to unroot first or can I go into lazy panda as is? Would this be my best bet to s-off?
2) updating to latest OTA required?
3) what is the easiest way to get latest TWRP on the EVO 4G LTE?
THANKS!!
Sent from my PG86100 using xda app-developers app
Just run lazy panda to get s-off. Download goo manager from play store to install TWRP. when you open goo, just tap the menu button then tap install open recovery.
Sent from my EVO using xda app-developers app
Being on Hboot 1.12 you're ready to go. You don't have to flash the ROM and kernel separately-just download your ROM, boot into recovery and flash away. Don't forget to make a Nandroid. As far as TWRP, I used Goo Manager from the Play Store to install it, but you can also download it from the TWRP site. Newest version is 2.3.1, I believe. Also, for S-off you can run the Lazy Panda tool. I have yet to bother with it since I'm on Hboot 1.12 and can flash ROM's, kernels and radios without issue I'll get around to it eventually, though.
Sent using my HTC EVO LTE and a magic wand
aagbulos said:
Background info:
I remember rooting my wife's EVO 4G LTE and it installed superuser automatically and for some reason...I can't remember which method I used. Bootloader screen now says TAMPERED. I'm on 1.12 bootloader and 1.13 software.
But now, I would like to install MeanROM.
I really don't have the time to read through a lot of the forums like before since I have a 2yr old and newborn to help take care of.
Questions:
1) Do I need to unroot first or can I go into lazy panda as is? Would this be my best bet to s-off?
2) updating to latest OTA required?
3) what is the easiest way to get latest TWRP on the EVO 4G LTE?
THANKS!!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
easiest way to get twrp is threw the goo manager app.. menu top right the hit install open recovery script.. mad easy! u have to have your bootloader unlocked to flash a recovery first.. then u can flash twrp.. i would run lazy panda.. read the instructions.. its easy also.. if your rooted now u can run lazy panda then when u s-off flash recovery
You guys rock! Thanks for the advice.
Lastly regarding lazy panda...please correct me if I'm wrong.
I was reading their website and it mentions about the stock RUU...if I'm only rooted, I guess I would already be considered running a stock rom since I haven't done anything else to the phone. I'm assuming I would not have to download and run the stock 1.13 RUU right?
I would just run lazy panda and presto, s-off?
Thanks again!
Sent from my PG86100 using xda app-developers app
aagbulos said:
You guys rock! Thanks for the advice.
Lastly regarding lazy panda...please correct me if I'm wrong.
I was reading their website and it mentions about the stock RUU...if I'm only rooted, I guess I would already be considered running a stock rom since I haven't done anything else to the phone. I'm assuming I would not have to download and run the stock 1.13 RUU right?
I would just run lazy panda and presto, s-off?
Thanks again!
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
You're good with what you have. I've even heard of people with newer ROM's running Lazy Panda, but just go with what you have.
Sent using my HTC EVO LTE and a magic wand
FinZ28 said:
You're good with what you have. I've even heard of people with newer ROM's running Lazy Panda, but just go with what you have.
Sent using my HTC EVO LTE and a magic wand
Click to expand...
Click to collapse
Oh ok. I just want to be sure since my wife would kill me if I bricked her phone lol.
Sent from my PG86100 using xda app-developers app

Updating radio s-off

I've been looking through the threads and haven't seen anything similar to the issue I have. I'm running the new meanbean except all my radios, hboot and all that is pretty out dated. Probably the reason why I can't get 4g yet the wife's phone, sitting next to mine, is showing full bars. I have been trying and trying to install any radio update, jewel pack I can find to update my radios. I'm running the latest version of twrp. Everytime I try to install any update pack through twrp it fails. I've even tried older versions, yet newer than mine, and still get the same results. Any help from you guys would be appreciated. Posting was my last resort.
Sent from my EVO using xda premium
S-OFF your phone then update firmware/radios. The only way to update your firmware while S-ON is to re-lock and take the OTA
jasnoc said:
I've been looking through the threads and haven't seen anything similar to the issue I have. I'm running the new meanbean except all my radios, hboot and all that is pretty out dated. Probably the reason why I can't get 4g yet the wife's phone, sitting next to mine, is showing full bars. I have been trying and trying to install any radio update, jewel pack I can find to update my radios. I'm running the latest version of twrp. Everytime I try to install any update pack through twrp it fails. I've even tried older versions, yet newer than mine, and still get the same results. Any help from you guys would be appreciated. Posting was my last resort.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Option 1 - Relock and run the 3.15 RUU. Then take the 3.16 OTA then Dev Unlock.
Option 2 - DirtyRacun to get S-OFF and head on over to Captain's thread for flashable that will update your radio, pri, nv, touchpanel etc.
Honestly I would recommend getting S-OFF while it is still available.
leerage said:
Option 1 - Relock and run the 3.15 RUU. Then take the 3.16 OTA then Dev Unlock.
Option 2 - DirtyRacun to get S-OFF and head on over to Captain's thread for flashable that will update your radio, pri, nv, touchpanel etc.
Honestly I would recommend getting S-OFF while it is still available.
Click to expand...
Click to collapse
You can use FacePalm to S-OFF if you are not already on 3.16
Ok, so I just noticed I wrote s-on, sorry guys I'm s-off. I swear I wrote that originally, I guess not.
Sent from my EVO using xda premium
Option 2 - DirtyRacun to get S-OFF and head on over to Captain's thread for flashable that will update your radio, pri, nv, touchpanel etc.
Honestly I would recommend getting S-OFF while it is still available.
Click to expand...
Click to collapse
I tried 2 of captains updates and neither worked. Both failed out
Sent from my EVO using xda premium
jasnoc said:
I tried 2 of captains updates and neither worked. Both failed out
Sent from my EVO using xda premium
Click to expand...
Click to collapse
They are not to be flashed in recovery. They have to be flashed in bootloader
Sent from my EVO using Tapatalk 2
knightwolf123 said:
They are not to be flashed in recovery. They have to be flashed in bootloader
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
When I do that it keeps saying bad or wrong image
Sent from my EVO using xda premium
^^^^^.....and named PJ75IMG, but I'm pretty sure his OP explains that.
Sent from my EVO using xda premium
scottspa74 said:
^^^^^.....and named PJ75IMG, but I'm pretty sure his OP explains that.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
... and also must be on the root of your EXTERNAL SD card.
Sent from my EVO using xda premium
Did all that, most of the time I get the bad image message. When it does go through I'll get a blue status bar on the right, will fill up than will say parsing that particular file. After that, the parsing message goes away and that's it, goes back to hboot menu. It apparently never updates because my versions don't change above the menu.
I'm almost wondering if there's a hardware issue which could be causing the updates to not install.
Sent from my EVO using xda premium
What baseband (radio) are you on now?
Sent from my EVO using xda premium
FinZ28 said:
What baseband (radio) are you on now?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
1.05.11.0606
Sent from my EVO using xda premium
Download this file and place it on the root of your external SD card:
http://d-h.st/mFj
Rename the file PJ75IMG. Some operating systems automatically hide the zip extension so check and make sure (it should appear as PJ75IMG.zip). Once you've done this reboot to the bootloader and update. If you are indeed S-off I can't imagine why it won't work otherwise.
Sent from my EVO using xda premium

I'm begging...please help me get back to stock

I am ready to throw this Flyer under my truck, and since development here has petered out, I'm desperate. I have a Wifi Flyer with the 1.11 HBoot. I was able to "root" it, but I'm still S-On.
I'm currently on 3.61.1540.31
I have CWM installed, but I lost my stock backup.
What I want to do is get completely bone stock, not rooted and flash a stock RUU.
I don't care about downgrading. I just want my Flyer the way it used to be before I screwed it up.
PLEASE HELP
You can wipe data, cache, etc in the cwm and use the appropriate RUU.
Would a 3.55.1540 RUU work? Because that's the closest one I can find to mine.
Sent from my SCH-I535 using xda app-developers app
moviemogul said:
I am ready to throw this Flyer under my truck, and since development here has petered out, I'm desperate. I have a Wifi Flyer with the 1.11 HBoot. I was able to "root" it, but I'm still S-On.
I'm currently on 3.61.1540.31
I have CWM installed, but I lost my stock backup.
What I want to do is get completely bone stock, not rooted and flash a stock RUU.
I don't care about downgrading. I just want my Flyer the way it used to be before I screwed it up.
PLEASE HELP
Click to expand...
Click to collapse
Go here. It has a link to ALL shipped RUU's.
MAKE SURE YOU USE THE RIGHT RUU FOR THE RIGHT FLYER!!!!!!
FOLLOW THE DIRECTIONS TO THE T!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Well, great news. I found a more specific downgrade guide on another site and found out I was having trouble extracting the ROM.zip from the RUU. Once I got that, it was all easy. Now rooted, running 2.3.4 and very happy. Not upgrading because I like GB Sense.
Sent from my SCH-I535 using xda app-developers app
moviemogul said:
Well, great news. I found a more specific downgrade guide on another site and found out I was having trouble extracting the ROM.zip from the RUU. Once I got that, it was all easy. Now rooted, running 2.3.4 and very happy. Not upgrading because I like GB Sense.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I am in the EXACT same boat as you. Glad to see your last post was as recent as this month.
Can you post how you got back to Gingerbread? Thanks.

Categories

Resources