odin failed when updating ( it suddenly shows fail )
which gave me a hard brick afterwards ! ( I cant make the combo , cant get into recovery menu )
Im wondering if i buy a usb Jig , can it actually works ?
cause I saw that many people is having issues with USB JIG and claims that it dosen't work
for I1900G
HELP NEEDEEEDDDD !!!!!
or should i surrender ?
Only way is JTAG.
If even that doesn't work,you can do nothng . :/
Sent from my GT-I9100 using xda premium
noobxkevin said:
odin failed when updating ( it suddenly shows fail )
which gave me a hard brick afterwards ! ( I cant make the combo , cant get into recovery menu )
Im wondering if i buy a usb Jig , can it actually works ?
cause I saw that many people is having issues with USB JIG and claims that it dosen't work
for I1900G
HELP NEEDEEEDDDD !!!!!
or should i surrender ?
Click to expand...
Click to collapse
providing half cooked info will lead u knowhere, post in detail which rom/kernel u tried to flash thro Odin, was the same really meant for I9100g or was it related to Some other model of s2 etc.
Sun90 said:
providing half cooked info will lead u knowhere, post in detail which rom/kernel u tried to flash thro Odin, was the same really meant for I9100g or was it related to Some other model of s2 etc.
Click to expand...
Click to collapse
well, i risk my friends phone to try and root, i installed the wrong the all-in-one zip which will root and replace recovery with CMW .
It made me a soft bricked , cannot be boot or stuck at boot logo. and the recovery wont work. i tried the solution made by others that using odin3 executive v1.0.0. i went into download mode and start the button on odin3. on the half way. the message stops. i've force to unplug it and see weather it works . but then nothing happen. i can't even boot up the phone .
anyway , when i tried to connect it to the pc . the driver logo popup but installation of driver failed .
I wonder if USB JIG could help me go into download mode again .
help :crying::crying:
If you can manage getting USB jig try it... And if you cant i better recommend you jtag...
Anyways what u were flashing via odin?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Related
hi guys..now im helping my friend to solve this weird problem..
i already read a lot of thread and still couldnt find the answer..
the situation is..
- this phone cannot boot at all..but if i connect it to usb, it just showing the grey battery and its keep blinking..
- can go into download mode and not recovery mode
- so i flash the stock KG6 & KG2 rom,runs perfectly on odin (successful) but then still cannot boot at all...
-not the battery problem bcoz the battery is heating..and i try change to my battery and still the same...dang it!
read about One-Click UnBrick but
"Is it still able to boot into CWM(Recovery Mode) or Download Mode.
If it's still able to go back into Download Mode, you don't need this software.""
http://forum.xda-developers.com/showthread.php?t=1153310
is it totally bricked or other hardware malfunction?
Try making a usb jig and using it. That would be the last resort.
EDIT: I hope that you are not ticking partition when flashing the roms??
jayerfernandes said:
Try making a usb jig and using it. That would be the last resort.
EDIT: I hope that you are not ticking partition when flashing the roms??
Click to expand...
Click to collapse
ok im gonna get it soon
im confuse..some of flashing rom instruction ask to tick the partition and some not.
whts the different?and what is 're-partition' do?
if i did tick it,then how to fix it back?uuurrgh..
Must say a lot of wrong information posted lately .
USB Jig no use if you can boot to download mode .All it does is boot to download mode .
Step One
BOOT LOOP
http://forum.xda-developers.com/showthread.php?t=1108499
jje
JJEgan said:
Must say a lot of wrong information posted lately .
USB Jig no use if you can boot to download mode .All it does is boot to download mode .
Step One
BOOT LOOP
http://forum.xda-developers.com/showthread.php?t=1108499
jje
Click to expand...
Click to collapse
And jig also used to reset custom binary rite?
Or is there any other way to do it?
kamaliqwan said:
And jig also used to reset custom binary rite?
Or is there any other way to do it?
Click to expand...
Click to collapse
you're right
the jig "only" resets the custom binary counter and sets your SGS2 in download-mode
another way is not known to me...
Ok lets start ,my problem start when i instaled 4.0.4 lq5 and did full wipe after that i cant run phone only galaxy s2 logo and download mode but recovery didnt work . Than i tryed "i9100_u1_02_20110310_emmc_EXT4-patched-standard.pit" but didnt worked ,and then i tried i9100_u1_02_20110310_emmc_EXT4-patched-ums-bricked+1048576-kB.pit and its worked my phone is worked but problem is my usb storage is 8G after that pit but isnt that problem but freazes when instaling some games on usb and app phone restart all the time when instaling bigest games or app.Than i tried some pits to try repearing this problem but phone is hardbricked twice no responding at all no usb jig no nothing black screen.Then i worked JTAG but after JTAG phone is not starting same problem i must put EXT4-patched-ums-bricked+1048576-kB this pit to boot phone...
Please help mee what to do whit phone is ther any solutions for that problem???????
vislavskid said:
Ok lets start ,my problem start when i instaled 4.0.4 lq5 and did full wipe after that i cant run phone only galaxy s2 logo and download mode but recovery didnt work . Than i tryed "i9100_u1_02_20110310_emmc_EXT4-patched-standard.pit" but didnt worked ,and then i tried i9100_u1_02_20110310_emmc_EXT4-patched-ums-bricked+1048576-kB.pit and its worked my phone is worked but problem is my usb storage is 8G after that pit but isnt that problem but freazes when instaling some games on usb and app phone restart all the time when instaling bigest games or app.Than i tried some pits to try repearing this problem but phone is hardbricked twice no responding at all no usb jig no nothing black screen.Then i worked JTAG but after JTAG phone is not starting same problem i must put EXT4-patched-ums-bricked+1048576-kB this pit to boot phone...
Please help mee what to do whit phone is ther any solutions for that problem???????
Click to expand...
Click to collapse
Sounds very bad.
If you are lucky, your phone is only "soft-bricked".
Have a look here => http://forum.xda-developers.com/showthread.php?t=1457458
If this doesn't work, it might be a "hard-brick".
Still on warranty?
Good luck !
It_ler said:
Sounds very bad.
If you are lucky, your phone is only "soft-bricked".
Have a look here => http://forum.xda-developers.com/showthread.php?t=1457458
If this doesn't work, it might be a "hard-brick".
Still on warranty?
Good luck !
Click to expand...
Click to collapse
No waranity ,but phone working but have freazes when instaling some bigest games or dsownloading larger files
vislavskid said:
No waranity ,but phone working but have freazes when instaling some bigest games or dsownloading larger files
Click to expand...
Click to collapse
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
humzagr8 said:
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
Click to expand...
Click to collapse
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
neerajganga said:
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
Click to expand...
Click to collapse
You should try to go into recovery mode. From there, try to factory reset
Sent from my GT-I9100 using Tapatalk 2
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
humzagr8 said:
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
Click to expand...
Click to collapse
well it cost hardly a $ or 2
if u cant
then try lending 1 search some 1 near ur place here
http://forum.xda-developers.com/showthread.php?t=1495867&page=35
or make a usb jig urself .
Some one reported this:
Plug a standard usb cable while pressing vol down. It will enter download mode. Not tested by me, but you loose nothing to try and tell us if it works
Sent from my GT-I9100 using Tapatalk 2
omg thanks so much i managed to get in to download mode
How to solve that
I have an S2 Hercules T989... I tried upgrading it from 2.3.6 to 4.0 but when I flashed with Odin 3.18 it gave me that error message.
I have tried four or five times reflashing it, rebooting to download mode but still it stayed like that for 1 1/2 hours...
So, I got to visit another site, I couldnt remember that actually, but it talked about on how to upgrade S3 to latest version.
There, I downloaded the latest version of Odin, too, that's v4 I think, and when I tried again (first time with that version), it worked!
You don't need to actually redownload the file, but instead, try other odin versions, recommended to download and use the latest one coz it will be the safest way to upgrade your galaxy device. Hope this helps.
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Edit: Samsung service has replaced the mother board!!
Doing the pit partition has resulted in my phone getting bricked!!
So people new to the forum, never do it :laugh:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
CashAndPotatoes said:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
Click to expand...
Click to collapse
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Pradeep said:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Click to expand...
Click to collapse
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Gediprime said:
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Click to expand...
Click to collapse
If you can access download mode, use it. Try re-flashing your kernel.
nikufellow said:
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Click to expand...
Click to collapse
JIG ???
Gediprime said:
JIG ???
Click to expand...
Click to collapse
Use the search button and use keywords "usb jig". Or google.
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Click to expand...
Click to collapse
I am sorry!! I am new to this forum and the phone being a recent purchase, i was very much desperate!!
I know the answer may not be different and the problem may not be new hence I've asked to guide me to the appropriate thread in my post!! No offence!!
Thanks for your reply. I will be taking the phone to Samsung Service tomorrow.
Gediprime said:
JIG ???
Click to expand...
Click to collapse
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
If you can access download mode, use it. Try re-flashing your kernel.
Click to expand...
Click to collapse
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Gediprime said:
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
Click to expand...
Click to collapse
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Pradeep said:
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Click to expand...
Click to collapse
You are misinterpreting what you read. What you're referring to is resetting the binary counter, and no it doesn't work on ICS bootloader however it still works for putting device into download mode (unless its bricked).
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
"Soft-brick" has absolutely no meaning, Your device is either "bricked" or it isnt. Its a made up term by n00bs when they cant get system to boot normally. Your devcie is only bricked when it wont power on or go into useable recovery+download modes. If you can simply use a jig or go directly into flashing a rom then your device is not bricked.
The "bricked" term is used far too loosely nowadays.
Pradeep said:
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Click to expand...
Click to collapse
Your phone died? you kiding ?
I'm using the leak version of Sammobile since 3 weeks... Why do you think the phone make a bad reaction now? why now?
Ok, you try to flash OFW and don't result. and then you flash again the XXLSJ ? and the phone colaspe?
What kind of roms do i flash? OFM or CFW ? ICS or JB ?
Well if a can connect with ODIN of course
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Pradeep said:
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Click to expand...
Click to collapse
Yes its possible which is the reason we already mentioned to try it
It all depends on the actual base issue though as to whether it will work. Its worth a try either way though, They only cost £1-2 or you can make them yourself if you have the spare parts. (Don't ask how, Use search).
I have tried the JIG, but no luck!!
I have given the phone to Samsung Service.
Hope they fix it!!
Will they use JTAG or it has to be done somewhere else in case Samsung people refuse to do it??
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
nikufellow said:
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
Click to expand...
Click to collapse
Thanks!! Well I did act dumb there!! Said I downloaded a game Royal Revolt (~200 MB), the phone got heated, blah blah blah......
Well I did not tell about firmware upgrade via kies and all....
Only thing that I can do now is wait and hope!!:laugh:
Hello .. I need your help guys ...
I have Samsung Galaxy S Plus ...
I have installed cmw recovery ...
It is rooted ...
When i want to flash a stock version on my samsung galaxy s plus , i choose the pda file , odin detect my phone , and when i Click Start ,it stuck to setupconnection ..
I have all drivers , no kies process running , no sim , no external card , 50%+ battery , tried in all usb ports and the same problem , it stuck to setupconnection , i have enabled debug mode too , tried in other Pc , still stuck ...
Any help here ...
xeinebiu said:
Hello .. I need your help guys ...
I have Samsung Galaxy S Plus ...
I have installed cmw recovery ...
It is rooted ...
When i want to flash a stock version on my samsung galaxy s plus , i choose the pda file , odin detect my phone , and when i Click Start ,it stuck to setupconnection ..
I have all drivers , no kies process running , no sim , no external card , 50%+ battery , tried in all usb ports and the same problem , it stuck to setupconnection , i have enabled debug mode too , tried in other Pc , still stuck ...
Any help here ...
Click to expand...
Click to collapse
Have you tried the latest version of ODIN v3? 1.87 I think.
I have odin 3.07 , i have tried with odin multidownloader too , there i upload and an ops file but it always brick my phone
Here are two of the latest versions. I just got my Galaxy Tab 2 two days ago so I'm still new at all the ODIN stuff.
I downloaded one of them , now i should upload pit and pda right ?
Can happen something with my phone , mabye brick or something else ?
xeinebiu said:
I downloaded one of them , now i should upload pit and pda right ?
Can happen something with my phone , mabye brick or something else ?
Click to expand...
Click to collapse
Should be no difference other than version differences in the ODIN apps themselves. ODIN is ODIN.
Can it brick my.phone , or if the process will not finish , can i reflash it again ...
xeinebiu said:
Can it brick my.phone , or if the process will not finish , can i reflash it again ...
Click to expand...
Click to collapse
Anytime you flash something to a device you chance bricking it. For your device I cannot say for sure. Both versions of ODIN I posted came from Samsung Galaxy threads.
Hey bro , still stuck in setupconnection ...
I didnt tried with pit ....
Now i tried with pit too , still stuck ... any idea ?
xeinebiu said:
Now i tried with pit too , still stuck ... any idea ?
Click to expand...
Click to collapse
No. Sorry. Isnt there a forum for your device?
Sent from my Samsung Galaxy Tab 2
xeinebiu said:
Hello .. I need your help guys ...
I have Samsung Galaxy S Plus ...
I have installed cmw recovery ...
It is rooted ...
When i want to flash a stock version on my samsung galaxy s plus , i choose the pda file , odin detect my phone , and when i Click Start ,it stuck to setupconnection ..
I have all drivers , no kies process running , no sim , no external card , 50%+ battery , tried in all usb ports and the same problem , it stuck to setupconnection , i have enabled debug mode too , tried in other Pc , still stuck ...
Any help here ...
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1922505
Sent from my Android Smartphone
if you use rom for your device with usb debugging on then chances of bricking is very less. also .pit file is for repartition so dont add it. hit thanks if i helped.
amit34521 said:
if you use rom for your device with usb debugging on then chances of bricking is very less. also .pit file is for repartition so dont add it. hit thanks if i helped.
Click to expand...
Click to collapse
What has usb debugging to do with bricking devices?USB debugging is active only when all services are up and running.Untill then its bootloader and kernel!
Also,.pit file contains only partition Information Table.So you can use it like you want.And I have always been flashing with pit file and not even once failed.Although you could use it only when flashing a whole rom!Not when flashing just kernel/modem etc...
To OP: Look if you have kies running at behind.It hinders the update process and kies too listen to download mode as it is the method kies uses to update.Does S plus uses some kind of lag fix in custom roms?Heard of those in sgs days.Dont know what fs S plus uses.
Sent from my GT-N7000 using xda app-developers app