Hello!
I need help with roms. I installed the doomlord kernel, but didn't liked it (too much bugs) and i also want to try some custom roms. I only tried Osimod (it have unworking play store), so return to stock, then i wanted to try galaxy task, but links on the galaxy task rom isn't working (http://forum.xda-developers.com/showthread.php?t=1545950), so i can't flash it.
Now i want to return to stock kernel, but can't find files (the links is also dead). Please post kernel + wifi modules if somebody have it, i can't find them.
P.S. I haven't enough posts to post in development section.
Thanks to all, who answer!
Related
Hello people im a noob i know, but ive searched the entire forum ive read the threads on developmente with [ROM], but i can never download a working rom, what m i doing rong, are you all hiding the roms.
P.s - After following several tutorials i have rooted and installed rom manager and clockworkmod on my viewpad7 so i just cant find any roms to test it, thank you in advance.
Anyone, really i can find the place to download them, i found a link to a paid website, and then it says private, other then that nothing.
Can anyone help me ??
Is that a big secret ?
Im still searching, can someone give me a reliable link ? PLEASE
Welcome, I'm not sure which specific custom ROM for the Vpad7 you are looking for, it would help if you can be spell it out ...
You are aware that newer ones are ITE (multi-touch screen) hardware/firmware based and older/generic/other name-branded ones are non-ITE, and the few Roms developed mostly in 2011 are distinct for each group.
Any and all files, including ROMS, patches and downloads housed on multiupload.com sites have been DOWN and unavailable as those servers have all been offline and shut - for good apparently, as in permanent. (Goggle for what happened, as you obviously are unaware as newbie around here ... as I won't go into details)
The EU V1.7b (ITE verison) is available via my dropbox as OP has been away & will have a new link up shortly - see below & perhaps you will better understood.
http://forum.xda-developers.com/showthread.php?t=1224825&page=31
Another recently posted ROM - KWBR V3.2 based on U.K. ROM (also for ITE) and is available for use, I successfully downloaded it & used it briefly.
http://forum.xda-developers.com/showthread.php?t=1386469
FlintFire_V1.0 zip download seemed to be available as it's also housed on a DropBox account
http://forum.xda-developers.com/showthread.php?t=1236988
These should be adequate to get started - read, read & read first, then - backup before proceed at your own risk and speed with OP's instructions. Good luck !
Thank you so much for the answer, as for those websites being closed, yes i know whats happening, im not that newbie .
My viewpad is ITE, and i had it rooted and installed clockworkmod, so im not looking for any specific rom, i just want one that would increase the performance and mainly the speed of my vpad7, so what you recommend ?
Still cant really find any usefull link.
Thank you in advance.
VPAD7 said:
My viewpad is ITE, and i had it rooted and installed clockworkmod, so im not looking for any specific rom, i just want one that would increase the performance and mainly the speed of my vpad7, so what you recommend ?
Still cant really find any usefull link.
Click to expand...
Click to collapse
I use EU V1.7b ITE ROM as my favorite ROM of choice, developer is back and one of the best around here for the Vpad7.
The CPU has practical limits and hardware cannot be overclocked at this point, performance is optimized AFAIK - YMMV.
Don't know what else to say about it ... Happy searching to you on "any usefull link"
Thank you for all, im finally getting some working links, sucessfully downloaded and still trying kwbr Viewpad 4.0.
Very strange, its installing without asking everything i had before even very old stuff that i had uninstalled long time ago, but i did erase all the cache before loading this ROM, is this normal ?
Never mind, fixed it , i just set everything to factory settings because i noticed the account was not syncing, now i have the ROM kwbr working with the account syncing, im installing whatever i want, everything working fine its even faster.
First thing first, Yes I am a noob. I am trying to learn how to build custom roms. I already created a working rom based off of the UCPLC5 leak. I pretty much just deleted apk files and zipaligned the rom. I am wondering if anyone would be kind enough to help me figure out where to find fix'x and mods such as accurate battery mod or 5ghz wifi fix. Is there a website that I need to look into? I have tried searching google to no avail. I also tried the search here but I am unable to get any ideas.
Thanks in advance.
you're on pretty much the only resource you need.....learn how to search, thats all i can say, because there is no 'directory of mods/fixes'.....
evolution2012 said:
First thing first, Yes I am a noob. I am trying to learn how to build custom roms. I already created a working rom based off of the UCPLC5 leak. I pretty much just deleted apk files and zipaligned the rom. I am wondering if anyone would be kind enough to help me figure out where to find fix'x and mods such as accurate battery mod or 5ghz wifi fix. Is there a website that I need to look into? I have tried searching google to no avail. I also tried the search here but I am unable to get any ideas.
Thanks in advance.
Click to expand...
Click to collapse
Task did 90% of the work, you just tweaked that base.
Learn to grab the untouched firmware and extract, deodex it then start working from that.
If you are working on a i9100 base, it would be best to check there forum section.
Deodexing and a number of the basic porting fixes are covered in my guide in the Development section.
5 GHz wifi fix doesn't apply to AT&T bases unless AT&T ****ed up on an epic scale, it's only for ported European firmwares. That's covered in the guide too.
LiLChris06 said:
Task did 90% of the work, you just tweaked that base.
Learn to grab the untouched firmware and extract, deodex it then start working from that.
If you are working on a i9100 base, it would be best to check there forum section.
Click to expand...
Click to collapse
More than that....more like 99.5. I wouldn't even call it tweaking yet.
Sent from my Galaxy S II (i777)
Hello everyone.
It has been a long time since I was here looking at things.
I'd like to say that there is great progress and Kutos to those who are doing the work.
-------------------------------------------
Anyone have any good/bad experiences using the kernel I listed below?
And, I do not really want to overclock at the moment, Is there a way to edit the kernel to remove the changed CPU and battery management?
I tried to find a custom kernel that, without all these extra changes, allows a custom ROM, but I have had no luck yet...
(I do not want to shorten the life of my device in any way); unless it is safe?
------------------------------------------
I was thinking of using this kernel (which I want to put the unnecessary changes back to stock):
[KERNEL][CWM][Player 5.0][USA]Entropy's Daily Driver, 3/5/2012 (1.2 GHz OC)
-------------------------------------------
And I'm still deciding between these two roms:
1) [ROM] Eryigit-GB-2.3.6 G70ZCKPA Galaxy Player 5.0 For USA and INT (Rls:3.5) {UPDATED}
2) [ROM] Eryigit-GB-2.3.6 G70XXKPH Galaxy Player 5.0 For USA and INTERNATIONAL (Rls:1.5)
My problem is I do not really understand the differences between these rom versions other than the display.
Is that all that is different? the themes?
And I'm having trouble finding if this ROM can actually work the cameras, flash, Bluetooth, etc. or are things not working?
I tried looking for a "bugs" category, but I haven't seen one.
----------------------------------------------
Thank you for posting your experiences and such.
I'd jump right in and try the kernel and roms, but I really do not want to risk breaking anything, I kinda just want to do it right the first time and leave it.
--------------------------------------------
I mainly been looking because I read that Samsung is not planning any updates for my device and I figure I'd modify it now since I wont get the latest android for it.
My device:
Samsung Galaxy Player 5.0 Wifi USA version, WITHOUT mechanical home button...
You cant edit the kernel and off course its safe,everybodu is using them..but if you want you can down clock with some app but don't see why..on roms you mentioned everything works...difference is first has more futures like 14 button power menu etc..and second is basicy stock rom.
Alright bro. Entropy Kernel: You wont notice anything different in your Player if you flash it. It will only make it faster, but no UI changes. And the ROM you listed, use 3.5, Everything works. Again, more tweaks will make it faster. The ROM probably has some things changed in the UI but thats for the better. No bugs in that ROM. If you need help don't hesitate to PM me
Sent from my YP-G70 using xda app-developers app
Sorry I have been away for a while. College takes up all my time...lol
Thank you both for posting that. It verified everything I needed to know about the ROM and Kernel.
(I just want this to last if I overclock it with with the custom things, I do not feel like replacing a battery within the next couple years...lol).
Later on I will go find an odin or something along those lines and backup what I can from my device so I can hopefully go back to stock later if I ever needed to...
Hopefully I will be able to do it before the world ends in about 3 months. I will post here when I get to it.
I just recently bought a 32 GB MicroSD card for it. Its really nice as I can store everything in my phone now and its essentially my slate PC but its a phone, so I will need a time when I wont need to use it for school/work/navigation things for a while so I know its stable.
I´´m new here, so I do not know if this is the right forum for this:
I have a Discovery V5 with Android 4.0.4 on it, and it´´s rooted. Does anyone know where to get the original ROM or could anyone share it, BECAUSE: I deinstalled the Play-Store. Reinstalling it (and any diferent versions of play store) won´´t work anymore. The app always quits with message (unexpected error occured, etc...) I don´´t love this app so much, but for app-update purposes it´´s neccesary. In other forums the advice is given to re-flash the device with it´´s original rom, but i had not saved the rom before experimenting with the device
any suggestions about that (or any other advice about getting play-store to work again? )
cheers
could someone be so nice giving me a tip for a custom rom which is Android 4.4+ that is very stable and have long accu time.
it must not have the ultra super future functions and must not be the latest. Also don't need super kernel tuning switches.
At the moment i'm on 4.3 rooted stock rom and the features are fine for me.
Need only a newer rom for playing pokemon go
thanx Michael
wrong section buddy
Hi.
You cant open here this thread and you cant really ask what rom shoud we recommend, you need to install rom and try it yourself.
Only help that i can give you is thread by Trafalgar Square here you have list of all newer roms http://forum.xda-developers.com/galaxy-s3/orig-development/10-04-index-roms-t2218825
And this one http://forum.xda-developers.com/galaxy-s3/general/galaxy-s3-i9300-basics-best-performance-t3111802
This is gonna get removed so i dont now if i was of any help xd
for me this
[ROM][TW][4.4.4][12.06.16][v6] HYPER-ROM and v7 will be available soon
but you should try them all and see what is best for you
@The Merovingian Move Thread Please...