Hey guys.
I was doing a full wipe, to reinstall Jellybean Rom, which I had been running for 2 weeks. Thought I'd give it good wipe and update to the latest version.
I wiped.
Then I tried to format the system. This was taking ages, longer than usual, and for some reason I decided to reboot and do it again as it may have got stuck.
Now the tablet won't boot, so I can't get it in to recovery or download mode, as it won't turn on at all.
There was about 70% battery remaining.
Any ideas?
Edit: The only thing I seem able to do is see it as an APX device in Device Manager. I have tried holding down power buttons, volume buttons etc.
ohh sh*t , you bricked your tab !!
Try reading this post and try the solutions mentioned in the thread : Link to thread
Or try repairing it by following the steps in this thread : Here
georgesadam said:
ohh sh*t , you bricked your tab !!
Try reading this post and try the solutions mentioned in the thread : Link to thread
Or try repairing it by following the steps in this thread : Here
Click to expand...
Click to collapse
Thanks for the reply. I'm currently trying to nvflash it but it seems I have a locked bootloader and therefore can't. Only option seems to be to try and run the battery down as has been suggested.
Well i dont really know what to say ..
Are you still under warranty ?
Did you try posting in the thread where you downloaded the rom from because they might help you ?
Were you using a JB rom or jellybeanICS rom (toldos rom } ?
Sent from my GT-P7500 using Tapatalk 2
Yeah I bought it in June, but I don't know if they'll help me?
I haven't tried posting there, as I guess it isn't a rom issue, it is because the system shut down whilst formatting, and perhaps now has nothing to boot off of?
Toldos Jellybean at the time.
I've been trying the command prompts from here: http://forum.xda-developers.com/showthread.php?t=1130574 but it seems it is locked as I get the 0x4 error.
No idea!
then try asking toldo in his thread , he might help you with something
Asked in the Toldo thread but I believe it is a tab issue not Rom. I don't get why I can't even boot into Download or Recovery. So frustrating.
Got a dead tablet right now, trying to run down the battery and see if it'll switch on after.
Smithyster said:
Asked in the Toldo thread but I believe it is a tab issue not Rom. I don't get why I can't even boot into Download or Recovery. So frustrating.
Got a dead tablet right now, trying to run down the battery and see if it'll switch on after.
Click to expand...
Click to collapse
Fastest way is still to talk to the Samsung Support boys...
Waiting on a bag to send it off to them .
Least I've got my new S3 to play with!
Sent from my GT-I9300 using xda app-developers app
Related
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
I was trying to return to stock using Heimdall. It failed for some reason. Whenever I have tried to use it it always says it failed but this time it went further then usual but the end result was a fail. I think it just repartitioned but I'm not sure. Anyways the only thing it would do is boot into cwm and download mode. So I restored a backup a previously made. Same thing it only booted into download mode and cwm. So I went and tried to flash through odin. Everything worked fine and still the same thing. So then I followed the unbrick thread on XDA and flashed the file and everything finished and said successful but my device would not boot up at all. Doing a little more research it seems that the unbrick method was for 5.0 devices only which I don't know why it isn't placed in plain sight for everyone to see but anyways now I have a dead device. Has anyone had any success with fixing this problem?
Can someone please help me
fresh85 said:
Can someone please help me
Click to expand...
Click to collapse
Ok so:
1. This isn't even talking about development so why are you putting it into dev section?
2. Have you tried a jig to get you back into download mode?
zaclimon said:
Ok so:
1. This isn't even talking about development so why are you putting it into dev section?
2. Have you tried a jig to get you back into download mode?
Click to expand...
Click to collapse
I posted here because I have learned that only here is where people respond but anyways yes I have tried a jig and nothing happens.
fresh85 said:
I posted here because I have learned that only here is where people respond but anyways yes I have tried a jig and nothing happens.
Click to expand...
Click to collapse
Wrong attitude, man. XDA is a free service and you are soliciting unpaid help. Follow the forum rules.
Most, if not all, of our Galaxy Player forum developers and contributors pay attention to all threads and you will get an answer from someone who knows.
If not, look in the development forum and find a developer and send a PM.
Don't clutter the wrong forum with your pleas for help, acting like you're the only one with that problem.
fresh85 said:
I posted here because I have learned that only here is where people respond but anyways yes I have tried a jig and nothing happens.
Click to expand...
Click to collapse
And you expect really having an answer here? You are serious right? Please tell me 1 recent thread on general that haven't been replied and then we can see if we never replies. Geez people are never grateful from what I see...
You guys are getting upset for the wrong reason. I have no attitudes and I'm just looking for help. I tried the other forum and didn't get any reply so I moved it to this forum and I am seeing some activity. I didn't know it was a crime. I was asked a question and an answer was given. Don't mistake a straight forward answer for an attitude. Thanks for your input. Now is there a solution for my problem? The SGP is my little nephews and I experimented with it and messed it up. All I want is a point in the right direction.
It might be a kernal issue. Try flashing a kernal for the 4 and see if that works.
Sent from my Chip 1.5 ROM + Entropy512's Kernal Samsung Galaxy Player 5.0 U.S.
fresh85 said:
You guys are getting upset for the wrong reason. I have no attitudes and I'm just looking for help. I tried the other forum and didn't get any reply so I moved it to this forum and I am seeing some activity. I didn't know it was a crime. I was asked a question and an answer was given. Don't mistake a straight forward answer for an attitude. Thanks for your input. Now is there a solution for my problem? The SGP is my little nephews and I experimented with it and messed it up. All I want is a point in the right direction.
Click to expand...
Click to collapse
Alright, let's all take a deep breath and chill. We empathize with you, dude, we really do.
We need to address another XDA rule that you overlooked. (Understandably. No biggie. Not calling you out, just saying.)
When you post on XDA, you need to be as thorough about your problem as possible, so we don't clutter the thread with Q&A.
1. Symptoms of the problem: What works and doesn't?
2. Any reactions to button presses? Lights? Screen? Sound?
3. Any evidence that it's booting?
4. Does your computer register that it's being plugged in?
That'll help you get started. List anything else that might be noteworthy. Someone will help you.
Also, nightfire brings up a good point. Try flashing the stock kernel for your device via ODIN.
EDIT:
What procedure did you go through when you were following the (wrong) un-brick instructions? Because, if your device is totally unresponsive, you've probably got yourself a Galaxy Paper Weight. If it's not something as dire as that, there may still be hope.
Did you attempt to flash a 5.0 bootloader on a 4.0? A wrong kernel flash wouldn't screw up your device as badly as that. You may need to re-partition some things (/efs and PIT, perhaps) and re-flash stock ROM.
But, please, work with us here and be specific about exactly what you did that led up to the current.
Screen doesn't turn on at all and odin doesn't recognize it.
I used this method....."[10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABLE!!!". I'm not even sure anymore why I felt I needed to use that method but before I followed those steps my SGP would only go into download mode and CWM. I flashed roms and kernels using odin and it said pass...reset. I even restored an old backup but no matter what I did it always rebooted back into CWM. I followed the brick station steps but not the un-resurrectable part because my problem wasn't that extreme but after following through with those steps I now have a device that requires the un-resurrectable method but now I know that it's only for the 5.0. When I connect my device to my laptop it makes a sound like there is some life but nothing pops up...turns on or flashes. I even used a usb jig to try and get it to download mode but nothing at all.
Thank you guys for the help.
where are you now
check this thread out it might help---http://forum.xda-developers.com/showthread.php?t=1903252---Good luck
fresh85 said:
I used this method....."[10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABLE!!!". I'm not even sure anymore why I felt I needed to use that method but before I followed those steps my SGP would only go into download mode and CWM. I flashed roms and kernels using odin and it said pass...reset. I even restored an old backup but no matter what I did it always rebooted back into CWM. I followed the brick station steps but not the un-resurrectable part because my problem wasn't that extreme but after following through with those steps I now have a device that requires the un-resurrectable method but now I know that it's only for the 5.0. When I connect my device to my laptop it makes a sound like there is some life but nothing pops up...turns on or flashes. I even used a usb jig to try and get it to download mode but nothing at all.
Thank you guys for the help.
Click to expand...
Click to collapse
I have done the samething. I food get it going. Is this a US model.
Samsung Epic 4G Touch on xda premium
tim1089 said:
I have done the samething. I food get it going. Is this a US model.
Samsung Epic 4G Touch on xda premium
Click to expand...
Click to collapse
Yes it's the U.S model
Have you tried this ?http://forum.xda-developers.com/showthread.php?t=1531850. So what I gather is you can get to the download mode. If you can then you can fix it. The link I posted here is a good place to get everything you need. Use Hemidall method this was the only way to fix it. I had no luck with Odin. If your PC is not seeing your player go into device manager and remove everything under universal USB. after that click on the action menu and scan for new hardware. It will reinstall the usb stuff. reboot PC. Then get the samsung USB drivers install them. Next if you correctly installed hemidall it should work and see your deivice. Read the info ib this link carefully pick the right player. Down load the PIT file for your player. Then in hemidall install the partitions in the correct order as in the instruction. Let me know if this helps or if I can help you more
Made any progress, fresh85?
Higgs_Boson said:
Made any progress, fresh85?
Click to expand...
Click to collapse
No progress with getting my SGP working. I don't think I'm explaining my problem correctly because people are telling me to follow the steps that got me to this point lol but all the help is appreciated.
If you press and hold POWER + VOLUME DOWN for about 10 ~ 15 seconds, do you see a screen with a yellow construction-like sign appear? If so, you are in download mode, and that is a good thing. Try it and let me know.
Nope nothing turns on at all. I dont think its a complete brick yet because i get a beep sound from the computer when i connect it but no signs of life on the device.
Sent from my SGH-T769 using xda app-developers app
i was running two roms with dual boot. first was a supernexus jb rom and other mystic glory. i had some hicups with supernexus so i flashed a dream kernel over it. for the first time it booted upto dream logo (even asked for loading 2nd rom) and then went black; phone turned off. second time happened the same thing. then i tried to go to cwm recovery mode, but no luck. so booted with mystic glory rom and from the restart menu tried to go to cwm recovery. the phone turned off and now the phone wont boot beyond samsung galaxy s2 logo.
i searched through this forum and couldnt find any solution.
any help would be greatly appreciated. pls provide any links to any threads if you want me to download something.
Thanks
poooolbachhan said:
i was running two roms with dual boot. first was a supernexus jb rom and other mystic glory. i had some hicups with supernexus so i flashed a dream kernel over it. for the first time it booted upto dream logo (even asked for loading 2nd rom) and then went black; phone turned off. second time happened the same thing. then i tried to go to cwm recovery mode, but no luck. so booted with mystic glory rom and from the restart menu tried to go to cwm recovery. the phone turned off and now the phone wont boot beyond samsung galaxy s2 logo.
i searched through this forum and couldnt find any solution.
any help would be greatly appreciated. pls provide any links to any threads if you want me to download something.
Thanks
Click to expand...
Click to collapse
Dual booting has always been unstable and the only way out is to start from scratch. I would not advice dual booting unless you are able to spend time redoing it.
zelendel said:
Dual booting has always been unstable and the only way out is to start from scratch. I would not advice dual booting unless you are able to spend time redoing it.
Click to expand...
Click to collapse
thks mate for the reply.........any suggestions to get out of this mess.....
poooolbachhan said:
thks mate for the reply.........any suggestions to get out of this mess.....
Click to expand...
Click to collapse
Did u use the rom manager app?
Go to the development section and check out the stickies for going back to stock. That should be your first step.
Sent from my SGH-I777 using xda premium
Phalanx7621 said:
Did u use the rom manager app?
Click to expand...
Click to collapse
i m not sure wt u r suggesting.............but it was on my phone.......and now i cant get anyplace except for download mode using usb cable......
Red_81 said:
Go to the development section and check out the stickies for going back to stock. That should be your first step.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
i have tried going back to stock........odin runs completely and passes.......phones starts reboot......once past samsung logo, it shows cwm recovery pic for a sec from previous flash (which is wierd, since the phone must be back to stock)..........and goes black.......still able to go to download mode.......
i have also tried bootloader i777uckh7sbl.tar from one the posts here.........still no luck....
i think i have seriously messed up the phone........but since i can manage to get to download mode, its not a hard brick????
poooolbachhan said:
i have tried going back to stock........odin runs completely and passes.......phones starts reboot......once past samsung logo, it shows cwm recovery pic for a sec from previous flash (which is wierd, since the phone must be back to stock)..........and goes black.......still able to go to download mode.......
i have also tried bootloader i777uckh7sbl.tar from one the posts here.........still no luck....
i think i have seriously messed up the phone........but since i can manage to get to download mode, its not a hard brick????
Click to expand...
Click to collapse
The only think that can hardbrick was that bootloader you flashed... Don't do that when it's completely unnecessary.
korockinout13 said:
The only think that can hardbrick was that bootloader you flashed... Don't do that when it's completely unnecessary.
Click to expand...
Click to collapse
does that mean my phone is hardbricked........if not pls show me a way...........still can get into download mode...........
poooolbachhan said:
does that mean my phone is hardbricked........if not pls show me a way...........still can get into download mode...........
Click to expand...
Click to collapse
Brick means no sign of life. Stop using that word.
122ninjas said:
Brick means no sign of life. Stop using that word.
Click to expand...
Click to collapse
thanks mate........that is a gre8 relief .........any suggestions to get me out of this mess?........i could have get the jtag done on it but i live in India and shipping the phone to mobiletechvideos and getting it fixed will cost me nearly a brand new phone..........since it is US version of s2, i cant get it fixed in India through samsung........
i need some definitive actions.....because everything i have been doing until now through research made it worse.......only life signs its showing right now is getting in to download mode with a pc connection......also smetimes i see a flicker in the bottom four keys......pls help
poooolbachhan said:
thanks mate........that is a gre8 relief .........any suggestions to get me out of this mess?........i could have get the jtag done on it but i live in India and shipping the phone to mobiletechvideos and getting it fixed will cost me nearly a brand new phone..........since it is US version of s2, i cant get it fixed in India through samsung........
i need some definitive actions.....because everything i have been doing until now through research made it worse.......only life signs its showing right now is getting in to download mode with a pc connection......also smetimes i see a flicker in the bottom four keys......pls help
Click to expand...
Click to collapse
I suggest you continue trying to get to stock. Use a different stock package than the one that didn't work.
Sent from my SGH-I777 using xda premium
Hey people.
I rooted my ANDROID HTC ONE from T mobile, using a guide I found on here and the all in one toolkit.
I am using TWRP newest 2.5.0.0, I can access the bootloader and recovery, and have been sat here now looking for answers for about 5 hours.
It freezes on the HTC quietly brilliant screen.
Also says that there is no OS installed.
I am looking for help via TEAMVIEWER, or someway to get my phone working.
If you need more information please let me now ASAP so I can give it you.
UPDATE: Okay people I successfully installed the XenonHD ROM and it is now stuck in bootloop i have tried clearing the cache and it doesn't do anything, this is the only ROM that is currently working.
I have searched the net searched the post and still nothing.
I am almost got my phone back guys and am willing to DONATE or repay the favour via modding something through XBOX or whatever I can.
Please contact me soon as possible.
I am still on TEAMVIEWER.
Changed my recovery to ClockWorkMod Touch.
Still need help?
Sent from my HTC One using Tapatalk 4 Beta
osmosizzz said:
Still need help?
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah mate, really bad.
Can you offer any help please.
ScouseCarl said:
Hey people.
I rooted my ANDROID HTC ONE from T mobile, using a guide I found on here and the all in one toolkit.
I am using TWRP newest 2.5.0.0, I can access the bootloader and recovery, and have been sat here now looking for answers for about 5 hours.
It freezes on the HTC quietly brilliant screen.
Also says that there is no OS installed.
I am looking for help via TEAMVIEWER, or someway to get my phone working.
If you need more information please let me now ASAP so I can give it you.
Click to expand...
Click to collapse
There have been a lot of posts on similar issues. You can "sideload" a ROM via ADB commands from your computer. If you can get into recovery, your phone can be fixed. I haven't done this myself (still stock), but do a search on google or xda on sideloading a ROM from ADB.
stevedebi said:
There have been a lot of posts on similar issues. You can "sideload" a ROM via ADB commands from your computer. If you can get into recovery, your phone can be fixed. I haven't done this myself (still stock), but do a search on google or xda on sideloading a ROM from ADB.
Click to expand...
Click to collapse
Already tried sideloading, said it was complete successfully on the phone and on the computer, never worked still says no OS installed.
ScouseCarl said:
Already tried sideloading, said it was complete successfully on the phone and on the computer, never worked still says no OS installed.
Click to expand...
Click to collapse
Did you clear the cache? Also, I've seen some people have to format the partitions.
EDIT: But formatting does not seem to be needed if you sideloaded successfully.
stevedebi said:
Did you clear the cache? Also, I've seen some people have to format the partitions.
EDIT: But formatting does not seem to be needed if you sideloaded successfully.
Click to expand...
Click to collapse
Tried all that, Any chance you could try helping VIA teamviewer, you now more about it than me I think i could of done it in wrong order or use a bad ROM or KERNAL..
Teamviewer Info:
ID: 928 366 143
PASS: 8119
Im on now just looking for anyone to help. I will have a notepad up so when you access my laptop just let me now your from here.
ScouseCarl said:
Tried all that, Any chance you could try helping VIA teamviewer, you now more about it than me I think i could of done it in wrong order or use a bad ROM or KERNAL..
Teamviewer Info:
ID: 928 366 143
PASS: 8119
Im on now just looking for anyone to help. I will have a notepad up so when you access my laptop just let me now your from here.
Click to expand...
Click to collapse
Sorry, I've not even rooted my phone, and I would not want to use your device as a learning tool. Let me look around and see if I can find a nandroid backup.
EDIT: Nope, I don't see one. Try opening a thread requesting a nandroid back for your recovery.
stevedebi said:
Sorry, I've not even rooted my phone, and I would not want to use your device as a learning tool. Let me look around and see if I can find a nandroid backup.
EDIT: Nope, I don't see one. Try opening a thread requesting a nandroid back for your recovery.
Click to expand...
Click to collapse
Ok thanks.
Still looking for help guys. Really need my phone up and running, I got a job to run.
UPDATE: Installed XENONHD ROM and it has got passed the HTC Quietly Brilliant screen and moved onto their load up screen.
BUT, then resets backs to the HTC load up screen then back to there's.
Any more help is appreciated and am willing to donate to them for getting my phone back online.
ScouseCarl said:
UPDATE: Installed XENONHD ROM and it has got passed the HTC Quietly Brilliant screen and moved onto their load up screen.
BUT, then resets backs to the HTC load up screen then back to there's.
Any more help is appreciated and am willing to donate to them for getting my phone back online.
Click to expand...
Click to collapse
I think i will be able to help you, am at work atm but when i get home around 6:30 pm est i will teamviewer with you to try to get you back on track.
ScouseCarl said:
UPDATE: Installed XENONHD ROM and it has got passed the HTC Quietly Brilliant screen and moved onto their load up screen.
BUT, then resets backs to the HTC load up screen then back to there's.
Any more help is appreciated and am willing to donate to them for getting my phone back online.
Click to expand...
Click to collapse
You have to be careful with No o.s installed .
Normally if u reboot when u see that you'll brick.
Without a o.s you have no bootloader..
I bricked my s3 and had to jtag it when it said no o.s I rebooted and black blank screen nothing.
I've had this happen also when choosing format system and format data /media some reason it botches the boot up .
My only fix was to sideload a rom or wipe factory and restore a nandroid .
Sent from my M7 using xda premium
iamfightaa said:
I think i will be able to help you, am at work atm but when i get home around 6:30 pm est i will teamviewer with you to try to get you back on track.
Click to expand...
Click to collapse
Thankyou.
How long is that about as I am in UK.
lojak29 said:
You have to be careful with No o.s installed .
Normally if u reboot when u see that you'll brick.
Without a o.s you have no bootloader..
I bricked my s3 and had to jtag it when it said no o.s I rebooted and black blank screen nothing.
I've had this happen also when choosing format system and format data /media some reason it botches the boot up .
My only fix was to sideload a rom or wipe factory and restore a nandroid .
Sent from my M7 using xda premium
Click to expand...
Click to collapse
No i got a ROM working, the XenonHD.
I am basically I think stuck in a bootloop, I am currently sideloading the ROM again wiped the data and that.
So going to check again inabit.
After all that did you try erasing cache one more time? Maybe through recovery or fastboot?
Sent from my HTC One using xda app-developers app
iamfightaa said:
I think i will be able to help you, am at work atm but when i get home around 6:30 pm est i will teamviewer with you to try to get you back on track.
Click to expand...
Click to collapse
Thanks for helping him. I just didn't feel comfortable working on this when I have not done it on my own phone first.
Okay guys i will add a thanks to all your posts.
My phone is now working I got it to stop bootlooping but just need a little help to check if my phone is rooted and what not.
So how can i check since I have nothing on my phone including the playstore or anything.
ScouseCarl said:
Thankyou.
How long is that about as I am in UK.
Click to expand...
Click to collapse
in about 2 - 3 hours from now.
---------- Post added at 04:12 PM ---------- Previous post was at 04:08 PM ----------
ScouseCarl said:
Okay guys i will add a thanks to all your posts.
My phone is now working I got it to stop bootlooping but just need a little help to check if my phone is rooted and what not.
So how can i check since I have nothing on my phone including the playstore or anything.
Click to expand...
Click to collapse
my recomendation is that you get s -off and supercid asap so next time you run into a similar problem you can just install any ruu(note only do this if your phone has no official ruu) and work it out from there.
ScouseCarl said:
Okay guys i will add a thanks to all your posts.
My phone is now working I got it to stop bootlooping but just need a little help to check if my phone is rooted and what not.
So how can i check since I have nothing on my phone including the playstore or anything.
Click to expand...
Click to collapse
What ROM did you flash? It should say if it was rooted (most are).
ScouseCarl said:
Thankyou.
How long is that about as I am in UK.
No i got a ROM working, the XenonHD.
I am basically I think stuck in a bootloop, I am currently sideloading the ROM again wiped the data and that.
So going to check again inabit.
Click to expand...
Click to collapse
What you need to do is this exactly .
Dload a rom on pc reboot recovery on phone first .IMORTANT FIRST FORMAT SYSTEM.
Then when that's done choose factory reset.
Rename the rom to Rom.zip or anything you want but make sure it says.zip
Sometimes sideload won't work if roms not renamed , that's mentioned in another thread about sideloading.
Then sideload the rom
Let it load and install .
When it reboots itl take a while .
I just did this to my HTC one the other day after I got stuck after formating data media .
Sent from my M7 using xda premium
lojak29 said:
What you need to do is this exactly .
Dload a rom on pc reboot recovery on phone first .IMORTANT FIRST FORMAT SYSTEM.
Then when that's done choose factory reset.
Rename the rom to Rom.zip or anything you want but make sure it says.zip
Sometimes sideload won't work if roms not renamed , that's mentioned in another thread about sideloading.
Then sideload the rom
Let it load and install .
When it reboots itl take a while .
I just did this to my HTC one the other day after I got stuck after formating data media .
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Yeah my phone is currently working now, but I have no play store nor do I now if my phone is rooted.
I have a custom ROM on it XenonHD. http://forum.xda-developers.com/showthread.php?t=2290785
That one.
Just currently trying to get to grips on how to work it and that.
I can't download the playstore because it says it is currently installed but it is nowhere to be seen.
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
nosrednaski said:
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
Click to expand...
Click to collapse
Go here
Flash Samsung stock ROM for your phone and baseband using Odin. It should be back to normal. It will be back to unrooted factory state.
Alternatively, if your cwm is still working, just flash a ROM zip after wiping data, cache, advamced->dalvik cache.
Do mounts and storage-> mount system->format system in CWM before flashing ROM if above 2 methods do not work (though I'm very sure one of them would work)
---------- Post added at 12:53 AM ---------- Previous post was at 12:50 AM ----------
Make sure that you flash the ROM of Samsung s5312 and not the one mentioned in the Odin guide. Search for it .
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
problem app system
May be you remove any important system app so i think you should install stockrom by odin or install custom rom ) there are many nice rom such as: cm11 , cm10.1
Same Problem
nosrednaski said:
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
Click to expand...
Click to collapse
Hi, have you found a solution to your issue? I am also stuck at the moment.
Never found a rom
bilicool said:
Hi, have you found a solution to your issue? I am also stuck at the moment.
Click to expand...
Click to collapse
I never did. I had to buy another phone.
nosrednaski said:
I never did. I had to buy another phone.
Click to expand...
Click to collapse
Ah i see. My apologies, I managed to fix it but it took a while. I had to download the official firmware from sammobile and flash it through odin. When i did that again i was stuck on the boot animation, but what i did was to go into my recovery and wipe cache, dalvik and also user data just to make certain and voila! phone works fine now.
I'm so sorry about your situation man, maybe you can try what i tried if you still got your phone. Its good as a spare!
Well done Sir!
I already spent a full work day on the sucker >.> I am just bitter and can't be bothered. Haha. Glad you were successful though!