well the story goes a bit like this my wifi didnt work so i used my clock work mod to kinda delete every thing on my x10min
and than i tried to turn the phone on again and the phone just got stuck at the se logo for somme resoen my phone wont start at flashmode
so i cant just flash a stock os and when i just plug the phone to my pc or wall chrger my phone just starts up and there isnt even a yellow
light blub that says hes rechrageing it just lights up and get stuck at se logo
plz help
It actually is possible to connect it to flashmode. Plug your phone to a computer, start flashing. It will ask you to get into flashmode. Then, with cable still plugged, do a hard reset by holding shutdown and home (middle) buttons at once. After some time, LED will turn on green and it's in flashmode. If it gets out of flashmode fast, then just do an extra hard reset when it just got into flashmode, i succeeded to repair my e10i this way.
Sent from my E10i using xda app-developers app
well it worked and didnt worked i was able to enter flashmode but when i flashed the stock room it still got stuck at se logo
aharonzu said:
well it worked and didnt worked i was able to enter flashmode but when i flashed the stock room it still got stuck at se logo
Click to expand...
Click to collapse
How did you flash that ROM, with flashtool or using seus or pc-companion?
If you used flashtool, where did you get the stock ROM from?
i used flashtoll with a stock room i got from xda
aharonzu said:
i used flashtoll with a stock room i got from xda
Click to expand...
Click to collapse
Try a Repair with SEUS or PC Companion, maybe the ROM you got wasn't for your phone, it's fairly easy to mix up the ROMS with the similar names that SE gave their phones.
thanks so much guys as i turns out i got mixed with the roms but now my phone is up and running thhanks alot :laugh::laugh::laugh::laugh::laugh:
Related
Hi all,
I tried to put a other custom rom on my x10 but it didnt work:
First i rooted the phone, then istalled xrecovery then i booted into xrecovery and selected custom rom, now my phone booted but its stuck on the Sony Ericsson screen
Flashtool is able to root the phone but then the debugging mode error comes,
Seus cant connect with the phone because i cant boot into save mode, also flashtool cant connect with the phone if i try to flash it.
im out of ideas!
HELP!
sorry for this bump but im desperate!
First of all. Was your root successful? If yes then does your base band support the rom that you're trying to install because one gets stuck in the boot loop if the baseband is not correct for that particular rom.
Cheers!
AdY
Sent from my Xperia X10 using xda premium app
It says the root was succesfull, but then you have to enable USB-Debugging mode but thats impossible beacause there isnt a correct rom on the phone so you cant boot and enable USB-Debugging mode.
I had the same problem 2 days ago.
I fixed it by downloading http://forum.xda-developers.com/showthread.php?t=959821 this one
Place it into flashtool, and wait till flashtool gives you the message to connect your phone in flashmode.
(im probably sure you know how to, but ill explain it anyways, remove your battery (because its stuck on the logo), wait a few seconds. put it back in. hold the back button, and connect the usb wire, untill the ledlight turns green.. fast press 'ok' on the flashtool screen, otherwise your phone will go out of flashmode)
Thanks, for the reply,
Ive contacted the Phone house, and they sended it back to SE, now SE says the phone has water damage, very wierd but still ill get it back today and then try to flash it your way
Hi every one
I'm a newbie on this forum and I have a problem with my xperia x10.
I explain, I have installed a rom on it, it worked very well but i tried on other one and the install aborted.
After this, i reboot my phone and since I am in a infinite boot loop.
The phone vibrate, the screen switch on, the sony ericsson logo appears and after that the phone reboot.
I can' access to the xrecovery menu, i tried the flash mode but it didn't work. I tried also to connect the phone to my PC but it's the same (I can't access to my phone with my PC)
I searched on the forum and on the web, I tried things but it didn't work too...
Is it brick? :s Do you have any idea of something to do.
Sorry for my english, I'm french
weakos said:
Hi every one
I'm a newbie on this forum and I have a problem with my xperia x10.
I explain, I have installed a rom on it, it worked very well but i tried on other one and the install aborted.
After this, i reboot my phone and since I am in a infinite boot loop.
The phone vibrate, the screen switch on, the sony ericsson logo appears and after that the phone reboot.
I can' access to the xrecovery menu, i tried the flash mode but it didn't work. I tried also to connect the phone to my PC but it's the same (I can't access to my phone with my PC)
I searched on the forum and on the web, I tried things but it didn't work too...
Is it brick? :s Do you have any idea of something to do.
Sorry for my english, I'm french
Click to expand...
Click to collapse
Use pc companion to repair phone.
Sent from my X10i using XDA Premium App
I tried to update my phone (2.3) with PC companion, it worked well until the end but i had an error message, I tried a second time but the same, and now I have a warning logo immediately after the sony ericsson logo :
When I connect my phone to my computer, it boots and I have the same logo, and it reboots, I tried to press the return button and it didn't work...
And I can't access to the repair function of PC Companion.
I hope you can help me...
Just download firmware (.ftf) file and flash it with flashtool.
Just go to xperia x10 android development forum and search for flashtool.
Sent from my X10i using XDA App
Thanks ! I will try
aimcr7 said:
Just download firmware (.ftf) file and flash it with flashtool.
Just go to xperia x10 android development forum and search for flashtool.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thats exactly what i did too everytime i brick my Xrecovery.
SEUS..
I tried all those softwares (PC Companion, SEUS, FlashTool) and nothing worked...
With SEUS and FlashTool, It seems to work, but in the end, I have an error message. With FlashTool the installation aborted and with SEUS a failure.
Could it be the battery? (I can't charge my phone...)
Try and diconnect the battery for a few minutes and plug the charger in again and leave it for a few hours.
If you take the back cover off there is a small rubber cover that can be carefully takem loose and beneath that cover you see a white plug and that is the batteryconnection to the phone.
I´ve bricked mine so many times now that I just leave that rubber cover off...
I recently installed a Miui ROM (MIUI pRiMe) and, when I rebooted after flashing using xRecovery, the phone freezes on the "Sony Ericsson" loading screen. How do I reverse this and get the phone back to normal?? Thanks for the help!
Restore the backup you made before flashing a new ROM, you did make one didn't you!
If not repair phone with seus or pccompanion
Sent from my X10i using xda premium
fish43 said:
I recently installed a Miui ROM (MIUI pRiMe) and, when I rebooted after flashing using xRecovery, the phone freezes on the "Sony Ericsson" loading screen. How do I reverse this and get the phone back to normal?? Thanks for the help!
Click to expand...
Click to collapse
really scared??
just wait and look if more than 5 miniutes (your phone brick)
dont panic..
our developpers here very experience!!
go back with SEUS are the easiest way for noobs
try it first and please reply
I'm having problems installing this ROM as well. When I flash the zip package I can't flash the kernel nor anything else. Thus, I get stuck on SE's logo too.
As said above, you can repair your device using PC Companion. Click on Update and then select Repair.
Sent from my X10i using Tapatalk
More problems...
Oh no!!! Now the phone won't even boot and get stuck on the 'Sony Ericsson' screen. I just get the flashing red light. I tried using Flash Tool and a generic ROM, but I can't boot the phone at all! Im screwed aren't I... WHAT DO I DOOO!!??
fish43 said:
Oh no!!! Now the phone won't even boot and get stuck on the 'Sony Ericsson' screen. I just get the flashing red light. I tried using Flash Tool and a generic ROM, but I can't boot the phone at all! Im screwed aren't I... WHAT DO I DOOO!!??
Click to expand...
Click to collapse
if you get the SE screen then it boots....
what you need to do is use pccompanion to repair your phone.
download it and follow the instructions
unless you have unlocked the bootloader you are NOT screwed..calm down and repair
I tried that. PC Companion won't even recognize that there is a phone connected.
Yea, when I clicked repair, I got as far as unplugging everything and holding the back key while plugging in again. After that is said that there was no software available yet. When I tried again, it wouldn't work at all...
fish43 said:
Yea, when I clicked repair, I got as far as unplugging everything and holding the back key while plugging in again. After that is said that there was no software available yet. When I tried again, it wouldn't work at all...
Click to expand...
Click to collapse
It might just be the device is weak. Plug it into the wall for an hour or two.
Sent from my X10 using XDA Premium App
It because your battery low I think
Sent from my X10i using XDA App
Plz help me out. I installed xperia mini rom in my x10 mini (by mistake) and now it is not going beyond Sony Ericsson logo.
I can't afford to loose my phone so please help me.
You're going to need to use the Sony Ericsson Update Service (SEUS) , downloadable from the Sony Ericsson website.
Thankx bt I have already tried that. The problem I encounter is that the software doesn't recognize my phone;-(
sent from my nexus s4.0.1)
have you tried using a flash tool and flashing the firmware?
Sent from my R800i using xda premium
Did you try to hold the back button while connecting your phone to SEUS?
Hi, I need help too with my bircked phone. I can not flash firmware, also did not work for me SEUS nor PC companion.
From flashtool I got this message (atteched pic).
You need to unlock your bootloader to flash new kernels. It says so in the instructions. You can tell yours is locked by having a look at VER= right before the error. When you unlock your bootloader, that R turns into r. You won't be able to flash any kernel without unlocking it first, which will void your warranty.
How to unlock the bootloader:
http://forum.xda-developers.com/showthread.php?t=1254225
The info is all around, there's little reason to be banging against these issues...
With S1tool I cant get to flash mode, the led is red blinking. No green led.
Also before I bricked phone flashing nAa kernel I unlocked the bootloader.. But looks NOT
I already had similar problem and discovered that my issue was caused by build.prop file. When I installed a rom from other device the phone was not starting because build.prop was not correct.
I supose you had usb-debuging active so while stuck at the logo try to use a program like "ADB mask controller" to check your build.prop. If you see minmi there then it's incorrect, for X10 mini it should be robyn. Replace the file
I just want to go back to stock rom. But SEUS nor PC companion not workin for me, coz I cant get to flash mode. I cant turn on my phone, I not see SE logo too.
Flash Mode normally works, you press the back button and insert the cable without letting go of the button. But to this when the applications requests it because the phone doesn't stay in flash mode unless there is activity.
After long pressed back button (>5 min.) I get to flashmode with SEUS, but then.. failed (pic below).
From PC Companion I get error too.
The main quastion - is it possible to unbrick my phone??? I almost gave up
arpu26 said:
After long pressed back button (>5 min.) I get to flashmode with SEUS, but then.. failed (pic below).
Click to expand...
Click to collapse
The SEUS should work mate.. Was ur phone charged while doin this?? N can u get into recovery by hittin the back button when sony ericsson logo cums??
faiyyaz said:
The SEUS should work mate.. Was ur phone charged while doin this?? N can u get into recovery by hittin the back button when sony ericsson logo cums??
Click to expand...
Click to collapse
I dont know if phone is charged, coz I cant turn it on. But I have left it to charging for all night.
Also I dont have recovery. I cant turn on my phone so I cant see any logo.
arpu26 said:
I dont know if phone is charged, coz I cant turn it on. But I have left it to charging for all night.
Also I dont have recovery. I cant turn on my phone so I cant see any logo.
Click to expand...
Click to collapse
Read ur first post .. it says cannot go beyond sony ericsson logo.. N now it is that it dosnt turn on..basically the battery mite be down..charge it again n giv it a try (considering the chargin port is fine) n by that time Il post u a link if I find regardin gettin into recovery if bricked.. Had read it somewer..wil hunt n try solvin ur prob by as soon as possible as I am on xda app on phone for now..
arpu26 said:
From PC Companion I get error too.
The main quastion - is it possible to unbrick my phone??? I almost gave up
Click to expand...
Click to collapse
if I can only hold your phone and unbrick it.
Hei guys, any more suggestion how to unbrick my phone?
Can u connect through an ADB like interface.
Sent from my PC36100 using XDA App
Not tried. How to do dat?
Hi guys my brother was using my old Neo V and he restarted the device and then all of a sudden the device gets bricked.
We cant turn on the device nor charge it or connect to the PC (no LED appears). We tried reinserting the battery and try charging it but still no luck. The device was running Ultimate HD ROM.
Can someone please help, everything was working perfectly before
TheUnknownCopy said:
Hi guys my brother was using my old Neo V and he restarted the device and then all of a sudden the device gets bricked.
We cant turn on the device nor charge it or connect to the PC (no LED appears). We tried reinserting the battery and try charging it but still no luck. The device was running Ultimate HD ROM.
Can someone please help, everything was working perfectly before
Click to expand...
Click to collapse
Try flashing a stock Rom with Flashtool.You will lose everything but at least you might get your device back
Firekostas said:
Try flashing a stock Rom with Flashtool.You will lose everything but at least you might get your device back
Click to expand...
Click to collapse
I tried using flashtool, but my phone does not even connect to the PC, the LED light doesnt even show
TheUnknownCopy said:
Hi guys my brother was using my old Neo V and he restarted the device and then all of a sudden the device gets bricked.
We cant turn on the device nor charge it or connect to the PC (no LED appears). We tried reinserting the battery and try charging it but still no luck. The device was running Ultimate HD ROM.
Can someone please help, everything was working perfectly before
Click to expand...
Click to collapse
did you tried all the steps mentioned below
1. Run the flashtool in FlashMode
2. Select the firmware (Only the checkbox's related WIPE should be checked)
3. When it asks for the phone to start by pressing the back button and plug the USB, the flashing will start....
My phone got stuck in the boot logo after installing a Custom ROM (i missed formatting the system). Then i tried the above steps to bring back my phone.
Do you have unlock bootloader? If yes then lock. and next step flashtool. Instruction to lock bootloader i thread how unlock in neo v section. You welkome ;]
strefa510 said:
Do you have unlock bootloader? If yes then lock. and next step flashtool. Instruction to lock bootloader i thread how unlock in neo v section. You welkome ;]
Click to expand...
Click to collapse
If he has an unlocked bootloader...then why does he need to lock it??
Flash a custom kernel..nd then custom rom..:good:
You guys dont understand.
I cant even connect my phone to the PC, it seems to be completely dead. LED is Dead. The phone seems dead.
When you connect notification led even flash for one second? try. I was brick my fon 3 months ago and led nothing work. But when'e i connect led worked for one second. Meabe you try update you system via OTA? That why brick.
TheUnknownCopy said:
You guys dont understand.
I cant even connect my phone to the PC, it seems to be completely dead. LED is Dead. The phone seems dead.
Click to expand...
Click to collapse
MUST BE YOU ACCEPTED AN OTA UPDATE.
Sent from my MT11i using Tapatalk 2
Have you try charging with wall charger...?your battery seems empty
Sent from my MT11i
--Deleted --