Hi,
I'm currently using the RR ICS v2.6 on my phone with a Iron Man lockscreen MOD.
After I flashed the new RR ICS v2.7 ROM, my phone can't boot up. It just stays at the screen with the Sieya kernal logo.
I flashed the ROM two time. First time I didn't wipe data/ factory reset. Second time I followed exactly what the instruction said. But both of them failed.
I had to flash back to a Stock ROM in order for my phone to boot up.
Anyone can help? I can't reply directly to the thread in the android development because I'm a new user.
Think this should be in Q&A section, however did your do full wipe. also try formatting system ect from mounts and storages in recovery. I'm no expert just helping
Sent from my GT-I9100 using Tapatalk 2
desiresiscool said:
Think this should be in Q&A section, however did your do full wipe. also try formatting system ect from mounts and storages in recovery. I'm no expert just helping
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
hi, thanks for your reply, but i want to make sure what the exact issue it is before i flash it again. I was so scared when my phone cant boot up as i thought that i bricked my phone.
If you don't mind, can you help me link this thread to the RR thread in the Galaxy s II android development?
Still no one can help?
It seems to me that most of the people that successfully flashed v2.7 are from v2.6.1. So, I'm thinking of updating my v2.6 to v2.6.1 then flash the v2.7. However, I can't find any download link for v2.6.1.
NVM, I found the download link for 2.6.1
It is actually in the RR thread but I just didn't recognize the links under "google drive" or "dropbox" or others are download links before.
yah I updated my sgs2 to rr 2.7 rom now.
Here's what I did:
-I first have v2.6 installed on my phone
-go into recovery mode
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-NOTE: I didn't Wipe data / factory reset
-flash v2.6.1 from SD card
-go back to recovery mode after aroma installation
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-reboot and I now have v2.6.1 installed
-go into recovery mode
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-NOTE: I didn't Wipe data / factory reset
-flash v2.7 from SD card
-go back to recovery mode after aroma installation
-Wipe Dalvik Cache
-Fix Permissions
-Wipe Cache Partition
-reboot and I now have v2.7 installed
I'm now thinking about changing my kernel from siyah to dorimanx. Can anyone give me some pros and cons about these two kernels?
Related
Hello to everyone! I am having a problem with the Revolution HD Custom Rom.
I am coming from the latest Leomar Rom, I did full wipe (except from the sd card), I installed Revolution HD from zip, but when I am rebooting, it keeps booting on clockwork and not on the OS itself. What is the problem? Any ideas?
Android_GR said:
Hello to everyone! I am having a problem with the Revolution HD Custom Rom.
I am coming from the latest Leomar Rom, I did full wipe (except from the sd card), I installed Revolution HD from zip, but when I am rebooting, it keeps booting on clockwork and not on the OS itself. What is the problem? Any ideas?
Click to expand...
Click to collapse
Go into cwm
Do a /data wipe aka factory reset
flash the checkromRevolutioHD.zip
Reboot
Problem solved!
I don't get it, I did that and nothing happened...
Q: I'm coming from a different ROM how can i install this ROM ?
A: Follow the steps below
Get into the CWM recovery
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Install the wipe version of this ROM
Click to expand...
Click to collapse
But your advice made it work, thanks!
Im using a galaxy s2 with Lite'ning rom (android 4). But i couldnt resist the MIUI UI (android 2) so decided to change to it. I placed my zip files in the internal storage and reboot CWM to install the zip. But to no avail, my phone gets stuck in boot loop twice. so im wondering is it because of the different android version that my phone refuse to boot? How can I overcome it to install MIUI?
Thanks in advanced
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I missed the Wipe Dalvik Cache. Will try again later. Thanks for your help ^^
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I did all of this and it still loops at welcome screen T_T
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Chakker3D said:
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Click to expand...
Click to collapse
still fails. everytime it bootloop, i need to use odin to install lite'ning to enter CWM again
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware or even your original firmware .
Still fails install old bootloader .
jje
hi
hi there
here is the best way solve ur problem as this has happened to me as-well,
first thing is download the stock rom form sammobile.com, then flash it using odin and then re-root and install CWM then install Miui Rom, if ur still stuck in the boot-loop then do a full wipe, if still stock, then try a deferent miui rom customized here is whet i have in my phone and its amazing and fast and batter saver for me,
MIUISP V.12 by Dragon
i hope this was helpful for you
Regards
iMatrix
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
I am paranoid of bricking... I am going from Neutrino GT ROM to Nottachtrix ROM.
What steps should I follow? Do this look complete?
- Reboot to recovery
- Wipe data
- Wipe cache
- In recovery chose "install zip from SDCard"
- Chose the NottachTrix ROM file
Thanks!!!
MrBadAss said:
I am paranoid of bricking... I am going from Neutrino GT ROM to Nottachtrix ROM.
What steps should I follow? Do this look complete?
- Reboot to recovery
- Wipe data
- Wipe cache
- In recovery chose "install zip from SDCard"
- Chose the NottachTrix ROM file
Thanks!!!
Click to expand...
Click to collapse
-reboot recovery
-make nandroid backup
-wipe system, data, cache, osh, dalvik
-install rom
-install gapps
-reboot
Sent from my MB860 using xda app-developers app
If you still want to have all your apps and don't mind if it doesn't work as it's supposed to, you could try a dirty install and only wipe cache and dalvik, not a complete factory reset. This usually works if you stay on the same android version (or upgrade) but does not if you go from blur to cm or vice versa.
But again, a clean install is always better (but we are lazy, aren't we) and there is no guarantee that everything will work
Edit: oh Jesus Nottach is blur, yeah then forget about the dirty install xD...
Hello!
I've been having really really weird problems with my phone and CWM.
Right now I have latest stable CM installed.
Today I decided to switch to ParanoidAndroid.
I got the right ROM, but I installed the wrong google apps the 4.2.2 one.
Now I get a crash when I try to use the keyboard so I decided to flash it again.
I went back into CWM.
Factory reset, deleted cache, wiped dalvik cache.
Installed the same .zip file I did the first time for Paranoid Android except I didn't install Google Apps.
I restart the phone and it doesn't seem to have flashed, it's the one with 4.2.2 GAPPS.
I've tried wiping it 3 times.
I decided to check internal storage on my phone and this is what I see.
I don't think it's supposed to look like this after I just did a factory reset. Right?
http :// puu.sh/5gzsb.png
http :// puu.sh/5gzsR.png
(I can't post links yet)
Right now I just want to hard reset my phone and install PA.
EDIT: I just Factory Reset, Wiped Cache and dalvik restarted my phone and I'm back to the PA ROM with GAPPS 4.2.2
via CWM
go to mounts & storage >> Format system
then
wipe data/factory reset
wipe dalvik cache
flash ROM
Flash Gapps
Flash Desired kernel (if any)
Reboot
everything should be Fine
And for next time I suggest you use philz recovery, it has a clean install options in wipe data/factory reset, it should help you