This may sound a daft question but the alignment is so far out I cannot select the option from the menu.
Is there anyway to get it to re-align. I've tried a hard reset but can't get it to.
Thanks in advance
Emo
Try this
Press the "action" key then "calendar" button if you can't find the screen alignment function in your start menu. This should bring you to the screen alignment process.
Worked for me during my gsm error... hope it works for you too.
Many, Many thanks. This worked (once I'd worked out which one was the action key :wink: )
Again Thank you
Emo
which is the action key
i heve the problem ........which is the action key.....with any button + calender button it goes to running programs
please help
m,ine is O2 mini
is it a different code./
The big button in between the phone buttons at the bottom. Press it in the middle.
i have problem ... i cant get out from Align Screen.
But when i test my Touch Screen using TEST Menu from bootloader, it said PASS.
What problem do i Have Here ??
thx
Hello,
Does someone know a solution for mapping the hardware buttton that normaly launch internet explorer? I would like to use it for X/closing cause I'm already tired to go on the upper side of the screen. i.e. when you put a new meeting with the keyboard, it is hard to go to the cross (up and right) for "saving" the new meeting.
I just bought this phone cause it has a good harware keyboard, but it's not important for me to have a direct access to internet explorer.
Thanks for your replies!!
juju66 said:
Hello,
Does someone know a solution for mapping the hardware buttton that normaly launch internet explorer? I would like to use it for X/closing cause I'm already tired to go on the upper side of the screen. i.e. when you put a new meeting with the keyboard, it is hard to go to the cross (up and right) for "saving" the new meeting.
I just bought this phone cause it has a good harware keyboard, but it's not important for me to have a direct access to internet explorer.
Thanks for your replies!!
Click to expand...
Click to collapse
Which button are you talking about?
I use AE Button to assign the Voice Recorder button to the OK/Close function and it works brilliantly. You can assign single press, long press and double press to different functions. It's a great little app that takes up very little system resources.
I'd still like to know which button is the Internet Explorer button because I didn't know we had that feature!
EDIT: Okay I just realised that you probably have the 16 key version whereas mine is the 20 key version
that's it, I've got the 16 key keypad. I really miss teh Ok/close button, caus I have to grip off my phone for going to the upper right corner of the screen and come back to the keypad....
AE button, doesn't work for this button, neither Vito button...
Anyone an other solution
juju66 said:
that's it, I've got the 16 key keypad. I really miss teh Ok/close button, caus I have to grip off my phone for going to the upper right corner of the screen and come back to the keypad....
AE button, doesn't work for this button, neither Vito button...
Anyone an other solution
Click to expand...
Click to collapse
Why doesn't AE Button Plus work?
I use it for OK/Close and it works perfectly well
So I must not have using it the good way.
But wich button are you talking about, cause with AE button, it only "see" the three external button (wich are on the side). I know that you can assign every button with AEbutton, but when I assign the internet key for ok/close, it close the app the first time I use it and then the key come back to its previous function (internet explorer). Someone a reg trick?
I have the 16 key version too and want the same, an ok button on the keyboard. button utilities only recognize the hardware buttons and not the keyboard buttons so there is no way to map these. hopefully someone will update their utility to include the keyboard buttons.
cheers,
cojones
"happy" to see that I'm not the only one who don't suceed by trying to change the function of the internet explorer button on a 16 keypad of a dual for using it with the ok/close button...
I found the camera button akwardly placed (kept launching the damn thing by accident) and dont use the camera much - so I remapped the cam button to OK/Close and have found this does the job for me. Not really a solution I know, but it wokrs for me.
Yes AE Button is great, but while you can map any key like Mail or IE, it will still launch the old app, we'd have to find a way to not launch the old app, in the registry possibly.
GpsPasSion said:
Yes AE Button is great, but while you can map any key like Mail or IE, it will still launch the old app, we'd have to find a way to not launch the old app, in the registry possibly.
Click to expand...
Click to collapse
I have found the same. Has anyone managed to map IE button succesfully? Also there is a pause/delay when using buttons handled by AE Button, has anyone else noticed this?
any updates!? i think it can be done in the registry though i don't know how. hope that someone can crack this.
Mapping IE button to Opera solution
cojones said:
I have found the same. Has anyone managed to map IE button succesfully? Also there is a pause/delay when using buttons handled by AE Button, has anyone else noticed this?
Click to expand...
Click to collapse
I have found a rudimentary solution. Add the IE key using AE Button Plus and run the following Mortscript (I am still a novice scripter) to close IE when it opens automatically and then run Opera Mini.
WaitFor("Internet Explorer",5)
Close("Internet Explorer")
Run("\Windows\jbed.exe", "-run s0_")
It works for me. If anyone has any suggestions on improving it, please let me know.
anythig new about this, pls?
thx
balviforever
Did anyone has a solution for this? Have been searching to change Ok/Enter and IE buttons. AEBPlus doesnt really work perfectly and eat into RAM..
Can we change registry? lnk? read somewhere about long_press_xxxx.ink but dont find it in our Nike.
Anybody found a solution for this? I've tried everything but couldn't map the IE button on my 16-key Nike to OK/Close.
I was wondering if anyone knows how to remap one of the fuze's keyboard keys to function as the TAB key, like in the TP. I've read a few threads about changing an english keyboard to a foreign language keyboard, but nothing on changing individiual keys. It looks too complicated for me to understand too. I think I can spare the Windows key if I can use it for the TAB function. Thank you in advance.
This would be great. I'd change the right shift key.
You could try Mobiion's MagiKB lite
This would be awesome, i want to switch the OK and the Fn keys on the left side and the Wifi and T9 keys on the opposite.
Thanks for your suggestion, wonghyf. I looked into Mobiion's MagiKB lite, but the program is not very intuitive. In fact, I couldn't really figure it out. Do you know if there is a good tutorial? Thanks again
ganglion5 said:
Thanks for your suggestion, wonghyf. I looked into Mobiion's MagiKB lite, but the program is not very intuitive. In fact, I couldn't really figure it out. Do you know if there is a good tutorial? Thanks again
Click to expand...
Click to collapse
Here is the link to magiKB lite's help: http://www.mobiion.com/mgkblguide.html
I think this section is particularly useful:
Fake Key: Replace the original key with a new one, so that when the base key is pressed, the fake key will be sent instead of the original one. This option is only available when the key type is VKey
This is how I map the fake keys:
Select [Edit Key-Mapping]>[Add New...], and then follow the instructions below:
1. Change its type to [Vkey]
2. Set focus to field [Key Code]
3. Select [Menu]>[Get key code...]
4. Now press the key you want to remap FROM
5. Tick "Fake this key with"
6. Set focus to field just right to "Fake this key with"
7. Select [Menu]>[Get key code...] and press the key you want to map TO; or select from predefined codes>
8. Press OK (left soft key)
You have to install hookmgr.cab as well to make magikb lite work. But still on my Touch Pro, some keys can't be mapped properly because the original key will be triggered as well (e.g. the SMS/MMS button), don't know why.
I just got my bluetooth keyboard with built in mouse today and got it to connect. The mouse doesn't work but the keyboard does. Sadly there is no menu or back button on the keyboard. Escape won't work to go back and I would like to use control for menu if possible. Also I can use the FN key for special characters but not to change volume. My question is does anyone know how to remap these buttons?
Anyone? 10char
anyone? just want to set esc as back, ctrl as menu and something as search
Ok so keys work on CM 6.1. No menu button though but built in mouse works along with FN/VOL keys.
just got a bluetooth mouse for my tablet and it works great but is there a way to configure buttons in it? its a 5 button mouse the nlly button not working is forward but id like to change it cause on main screen and most apps both buttons are click and be nice to have one open a menu or something thanks
does anybody know what idc file the mouse is?
ok did some searching and in my generic.kl key 324-318 are button_select, Button_start, Button_mode, button_Thumbl and button_thumbr