I am desperate and have searched all over several forums to hopefully find someone else that has pulled this boner and had the same situation. I seem to be the only one ... LOL
I tried updating my Razr Maxx to Blur_Version.6.16.211.XT912.Verizon.en.US (actually is 6.16.215). I got a stock 211 on my Razr using RSD. It booted into recovery afterwards and I just went ahead and tried plashing 215 from the SD card. All seemed to be going well, phone rebooted afterwards and showed it was "Optimizing Apps". I walked off to do something and when I came back my Razr had a black screen. I tried to turn it on, No Go. I tried the Reboot (Vol - plus Power buttons), No Go. I tried to boot into recovery (power and both Vol buttons). No GO
The facts as I know them. I did not unroot before trying to flash 215. When I plug the charger in, I get the LED in the upper left for a moment and then it goes out. I have charged the phone for 7 hours and then tried all the boot up options (regular, soft reboot, Recovery). Nothing seems to work to turn my phone on so I can retry everything via RSD or whatever I need to do.
I know this is long, but I really need your help .... From all you guru's ...
Thanks in advance. I am at work so I may not be able to reply right away. Thanks again.
James
Anybody??
vip546 said:
I am desperate and have searched all over several forums to hopefully find someone else that has pulled this boner and had the same situation. I seem to be the only one ... LOL
I tried updating my Razr Maxx to Blur_Version.6.16.211.XT912.Verizon.en.US (actually is 6.16.215). I got a stock 211 on my Razr using RSD. It booted into recovery afterwards and I just went ahead and tried plashing 215 from the SD card. All seemed to be going well, phone rebooted afterwards and showed it was "Optimizing Apps". I walked off to do something and when I came back my Razr had a black screen. I tried to turn it on, No Go. I tried the Reboot (Vol - plus Power buttons), No Go. I tried to boot into recovery (power and both Vol buttons). No GO
The facts as I know them. I did not unroot before trying to flash 215. When I plug the charger in, I get the LED in the upper left for a moment and then it goes out. I have charged the phone for 7 hours and then tried all the boot up options (regular, soft reboot, Recovery). Nothing seems to work to turn my phone on so I can retry everything via RSD or whatever I need to do.
I know this is long, but I really need your help .... From all you guru's ...
Thanks in advance. I am at work so I may not be able to reply right away. Thanks again.
James
Click to expand...
Click to collapse
Can any body help me? or
Can you at least tell me if this is recoverable or do I need to us It as a paperweight????
You have try to charge your razr? It happens me one time.
Sorry I didn't read it, but you can do a factory cable to charge directly the battery
Enviado desde mi XT910 usando Tapatalk 2
Related
I had a rooted vibrant running pretty nicely with all my apps optimized. ive always tried to install lagfix (voodoo, OCLF, UFL,), but none of them would ever work, they would just brick my phone and i would be stuck at the vibrant screen recovery loop.
no problem, i would go to download mode and flash odin...
few months later thought id give it another shot with the updates and such with voodoo...
again same thing... **** didn't work..
back to eugenes that does not brick and i was going to do the whole process again of getting back to the stock ji6.
in the middle of eugnes, there was a com error, dont know why, nothing was moved. the flashed had stopped in the middle.
took out the battery. and nothing. phone does nothing. plug it in, black screen. 3 button combo. black screen. not even the vibrant logo. and no charging screen.
black screen no matter what.
do i need to do the 'jumpstart' jtag method?
Google search it! It says dl odin and stuff just unbricked mine
Sent from my SGH-T959 using XDA App
stealthj said:
I had a rooted vibrant running pretty nicely with all my apps optimized. ive always tried to install lagfix (voodoo, OCLF, UFL,), but none of them would ever work, they would just brick my phone and i would be stuck at the vibrant screen recovery loop.
no problem, i would go to download mode and flash odin...
few months later thought id give it another shot with the updates and such with voodoo...
again same thing... **** didn't work..
back to eugenes that does not brick and i was going to do the whole process again of getting back to the stock ji6.
in the middle of eugnes, there was a com error, dont know why, nothing was moved. the flashed had stopped in the middle.
took out the battery. and nothing. phone does nothing. plug it in, black screen. 3 button combo. black screen. not even the vibrant logo. and no charging screen.
black screen no matter what.
do i need to do the 'jumpstart' jtag method?
Click to expand...
Click to collapse
you should post in Q & A next time. Anywhoo, can you get your phone into download mode?
I can tell you that I've been there, I can say with all certainty that this phone has recovered from the brink of of death so many times I don't even scare anymore. I just flash. You got to be patient I dug around Google and the forma and found the right combo that put me in download mode.
It was power and vol. down. No sim no sd.
I've learned that every phone responds to a different combo. Your phone isn't dead, just Samsung hibernating.
Sent from my SGH-T959 using XDA App
You seem to know what you are doing when it comes to flashing. All I can suggest is to try the various methods to get into download mode again. Some people have methods that work best for them. For instance, the 3 button combo never works for me. But pulling the battery, putting back in, holding down only the up and down volume keys (NOT POWER) and while holding insert the usb that the other end should already have been plugged into the computer.
but i'd say its safe to assume if you cant get to download mode by any of the methods on this forum, there is no going back.
Sent from my SGH-T959 using XDA App
Do a search for the jig also as a last resort, try checking in the bible I can't remember where that thread is, but it has helped quite a few people..
try two buttons combo up and power or down and power with the usb plug in
This is the absolute surefire way to get your phone into DL mode:
1.) Take out battery, SIM, and Memory card
2.) Connect phone to the computer
3.) Put battery back into phone while holding down up and down vol buttons
If your phone can still get into DL mode this way will do it guaranteed. The jig might also help but as far as I know it really only helps if your phone is hardware locked. If the above steps dont work for you then I'm afraid that the bootloader is gone and you are screwed =/
I saw a jig offered as a for sale item on the Team Whiskey forum. I believe it was around 9 or 10 dollars (maybe less) If you decide to go that route. Good luck!!!!!!!!!
thanks for all the replies everyone.... from what it looks like and to the extent of my knowledge, it looks like the bootloader is gone. my guess is it was flashing the bootloader? while the computer randomely decided to drop the com port?
anyhow, i refuse to let it die and am going to keep trying!
well that was weird. it worked. sim, battery, everything out, i held all 3 buttons, plugged USB and battery and let go of power all at EXACT same time and wallah! download mode. flashed eugenes, flashed UFD, then JI6. rooted, installed busybox, downloaded rom manager. found the backup i made before trying to install lagfix.... vibrant is stuck at 'vibrant' screen now... so flashed again eugenes, UFD, then JI6 again....
working normal again but i want my data from the backup....
advanced restore should i do? NOT restore the boot? only restore the data/system or or other options in clockwork recovery advanded restore? any help would be appreciated. first time trying to actually restore data from a clockwork backup.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
I have had the phone to pc screen before but plugging in the USB and holding the volume buttons arent working this time. Is there any other trick or special way to get around this?
What shows on your screen? R u completely bricked? Do u get a logo?. If u get the computer logo. Plug it in. Let the logo show up. Hold the 3 buttons. As soon as the screen turns black let go of power... let me know how it goes
Sent from my SGH-T959 using XDA App
This is my first post on XDA, so hello everyone! lol I think I've graduated from "noob" to eager learner, but this one has me stumped. Any help would be GREATLY appreciated.
I have a Verizon cdma RAZR Maxx, rooted, running Eclipse v1.3 custom ROM, 2.3.6., and cwm/bootstrap. I'm wanting to check out the new ICS ROM, but I can't get back to stock! When I tried recovery it said no files found. I tried RSD lite and it said it failed. I've tried wiping cache and factory reset too and none of that helped. I'm not sure which direction to go now...any ideas?
try using this http://forum.xda-developers.com/showthread.php?t=1486718
Add to original post
I forgot to add that I also tried mattlgroff's utility and it kept saying that the system could not find the correct path...??????
are you sure you are in fastboot mode
fastboot mode
Yes. I powered down holding the power and vol+- buttons, released power, and waited til the black screen w/white letters came up. I vol- twice to AP Fastboot, the vol+ to select. Then plugged in the phone and waited until it said USB connected and started the utility. I selected option one and followed the instructions from there and it wouldn't work.
I have another razr maxx with a shattered screen that I have to send back to the insurance company. It's rooted but still running stock. Can I pull the system files from it and push them to my other razr?
I rooted my phone the other day using super one click 2.3 and left it just rooted due to cwm in my rom manager app not showing my phone model for whatever odd reason. Tonight I did the most stupidest thing and decided to pick nexus 4G in rom manager and downloaded CM10 ICS rom from rom manager itself and as soon it finished downloading I pressed install with dalvik cache wipe checked and now my phone is just stuck on boot screen that say "GALAXY S 4G exclusively from T-Mobile"
I tried to hard reset by pressing home/vol up,down/power button but the screen just goes black for about 3 seconds then the same "GALAXY S 4G exclusively from T-Mobile" screen come on and it just stay there. I also tried to plug in the phone to my laptop but the phone is not recognized anymore and nothing happens.
This is the only phone I have and I am lost. I really need my phone back. What do I need to do?
please HELP:crying:
CyberGmonster said:
I rooted my phone the other day using super one click 2.3 and left it just rooted due to cwm in my rom manager app not showing my phone model for whatever odd reason. Tonight I did the most stupidest thing and decided to pick nexus 4G in rom manager and downloaded CM10 ICS rom from rom manager itself and as soon it finished downloading I pressed install with dalvik cache wipe checked and now my phone is just stuck on boot screen that say "GALAXY S 4G exclusively from T-Mobile"
I tried to hard reset by pressing home/vol up,down/power button but the screen just goes black for about 3 seconds then the same "GALAXY S 4G exclusively from T-Mobile" screen come on and it just stay there. I also tried to plug in the phone to my laptop but the phone is not recognized anymore and nothing happens.
This is the only phone I have and I am lost. I really need my phone back. What do I need to do?
please HELP:crying:
Click to expand...
Click to collapse
Okay, okay relax and stay calm first and foremost. I assure you, we've all been there (at least I have been lol). Needless to say, it sounds like you can fix this...which is good! I suggest you first head over to this thread: http://forum.xda-developers.com/showthread.php?t=954509 and download the toolbox. Once its downloaded, install the necessary drivers if you have not already. After that, you need to get your phone into download mode. There are a few ways to do this, and people prefer going about it in different ways...I'd suggest taking out your battery, and then popping it back in and holding the power on and volume up button at the same time and hopefully it will boot into download mode (it'll be yellow). If that doesn't work after a few minutes, remove the battery again, pop it in and try holding the power, the volume up and the little "arrow up" soft key at the bottom of the screen and hopefully this time it will go into DL mode. Once you're in DL mode, connect your phone to the computer and use the toolbox to flash to stock. This will bring your phone back to factory conditions and you'll be set to go. Be sure not to remove your phone while its flashing back to stock until you are given the green light. Good luck!
Xenoism said:
Okay, okay relax and stay calm first and foremost. I assure you, we've all been there (at least I have been lol). Needless to say, it sounds like you can fix this...which is good! I suggest you first head over to this thread: http://forum.xda-developers.com/showthread.php?t=954509 and download the toolbox. Once its downloaded, install the necessary drivers if you have not already. After that, you need to get your phone into download mode. There are a few ways to do this, and people prefer going about it in different ways...I'd suggest taking out your battery, and then popping it back in and holding the power on and volume up button at the same time, once your screen turns on, remove your finger from the power button and continue holding the volume up button, and hopefully it will boot into download mode (it'll be yellow). If that doesn't work after a few minutes, remove the battery again, pop it in and try holding the power, the volume up and the little "arrow up" soft key at the bottom of the screen, when the screen comes on, let go of the power button and hopefully this time it will go into DL mode. Once you're in DL mode, connect your phone to the computer and use the toolbox to flash to stock. This will bring your phone back to factory conditions and you'll be set to go. Be sure not to remove your phone while its flashing back to stock until you are given the green light. Good luck!
Click to expand...
Click to collapse
Thanks for trying to help, but is not working. I tried both options multiple times but it would not go into DL mode. I can't believe I did this to my only phone
CyberGmonster said:
Thanks for trying to help, but is not working. I tried both options multiple times but it would not go into DL mode. I can't believe I did this to my only phone
Click to expand...
Click to collapse
Relax, relax...I assure you. Everything will be fine. Your phone isn't dead. Getting into DL mode can be a pain, and honestly it took me a few tries my first time also. You just need to find the correct combo. Try with phone off, holding volume up and down at the same time and then plug in the usb until the phone boots up into DL (hopefully). If this doesn't work, report back. If it does, go through the steps in my last post.
Xenoism said:
Relax, relax...I assure you. Everything will be fine. Your phone isn't dead. Getting into DL mode can be a pain, and honestly it took me a few tries my first time also. You just need to find the correct combo. Try with phone off, holding volume up and down at the same time and then plug in the usb until the phone boots up into DL (hopefully). If this doesn't work, report back. If it does, go through the steps in my last post.
Click to expand...
Click to collapse
Another thing to try, pull battery, SIM card and SD Card. Then plug in USB to computer, plug in to phone, pop the battery in holding down volume keys (up and down) -- its a little tricky but you get the hang of it. It was only consistent way my phone would go into DL mode.
Same Problem
CyberGmonster said:
I rooted my phone the other day using super one click 2.3 and left it just rooted due to cwm in my rom manager app not showing my phone model for whatever odd reason. Tonight I did the most stupidest thing and decided to pick nexus 4G in rom manager and downloaded CM10 ICS rom from rom manager itself and as soon it finished downloading I pressed install with dalvik cache wipe checked and now my phone is just stuck on boot screen that say "GALAXY S 4G exclusively from T-Mobile"
I tried to hard reset by pressing home/vol up,down/power button but the screen just goes black for about 3 seconds then the same "GALAXY S 4G exclusively from T-Mobile" screen come on and it just stay there. I also tried to plug in the phone to my laptop but the phone is not recognized anymore and nothing happens.
This is the only phone I have and I am lost. I really need my phone back. What do I need to do?
please HELP:crying:
Click to expand...
Click to collapse
I have almost the same problem.
Did you ever get the phone to go into DL mode?
TIA
Wrong forum. Go to galaxy s 4G forum.
Sent from my SGH-T959 using xda app-developers app
gknitz said:
I have almost the same problem.
Did you ever get the phone to go into DL mode?
TIA
Click to expand...
Click to collapse
What exactly is your problem? Please list your device model and what ROM or stock android version you were using when issue began. Any other info you have would be helpful.
Paranoid, sitting in a deep sweat...
samsgun357 said:
What exactly is your problem? Please list your device model and what ROM or stock android version you were using when issue began. Any other info you have would be helpful.
Paranoid, sitting in a deep sweat...
Click to expand...
Click to collapse
i rooted with superoneclick .... it couldnt verify shell but it rooted.... then i put a kernel on called sms-t959v-kj6-v0.1.0unsigned-update. then i tried to flash a rom called SamsungSlim-T959-4.2.1.Beta.1-OFFICIAL and thats where everything failed.... its stuck at the rom boot.... the screen says semaphore..... PLEASE PLEASE HELP.... I FELL LIKE IM DYING LOL MY EMAIL IS carlosts2009 at gmail.com.. or text 856 2 4 4 101 8
Your problem is the kernel is for the t959v galaxy s 4g and the ROM is for t959 vibrant. You can fix it in Odin with the stock firmware but we need to figure out which device you have. Do you have a stock front facing camera?
Sent from my SCH-I535 using xda premium
samsgun357 said:
What exactly is your problem? Please list your device model and what ROM or stock android version you were using when issue began. Any other info you have would be helpful.
Paranoid, sitting in a deep sweat...
Click to expand...
Click to collapse
im using a samsung galaxy s 4g running on gingerbread (the latest version for this phone) I got the instructions for how to root my phone from youtube and everything was good until today when it just got stuck on the boot screen. how can I fix this. I need a professionals assistance for this.
This is the Samsung vibrant t959 (3g). It looks like you have the Samsung galaxy s 4g t959v. These are totally different phones, you need the galaxy s 4g forums, these files for the vibrant will not work on your phone. Find the correct forum on xda website and flash back to stock for the t959v
Sent from my SGH-T959 using Tapatalk 2
If someone helped you, hit the thanks button!
Hi,
I'm new to rooting and modifying and I'm sure I really screwed things up. My main issue is that my Razr is stuck in a bootloop and when I go to use Safestrap to recover it, the utility won't work. I'll try and detail everything I did that led up to this.
Yesterday, I rooted my stock ICS Verizon Razr xt912 using pedrotorresfilho's method. It worked without a hitch. I installed ROM Manager and then Safestrap 2.01. I used Safestrap to install CWM Touch Only Recovery. Part of the directions had me use the SuperSU to set Safestrap to denied after all was said and done. Safestrap created a restore file which I placed in my external sd. After that everything worked like it was supposed to.
Today, I decided to flash a custom ROM, but first I wanted to update to the latest version of Safestrap. I couldn't access it to uninstall the previous version because I had set it to denied. I re-granted its permission. Before I went to uninstall it I decided to go all the way back to stock thinking I probably screwed things up. I never set it back to denied. I rebooted my phone and it went into the startup screen for Safestrap. I hit the menu key, the screen went black as if it was going into the main menu and instead it starts to boot and gets stuck in a bootloop. Every time I hit volume down + power button and reboot the phone it keeps on doing this. I cannot get Safestrap to work so I can recover my phone.
I tried to use the default recovery but that won't work either. Hitting the right combination of buttons only brings me back to the Safestrap menu. I have been looking all over the forums here and elsewhere and nothing is helping. The utilities I have seen won't work for me. I don't care if I have to revert back to factory settings.
I'm sure other people will be more help, but I'll throw something out there. Hold volume down and power until it shuts off then immediately hold both volume and power. It should bout into the bootloader. Select AP fastboot and use mats utility to restore to factory.
Also, don't kill the battery if this doesn't work wake fire me knowable help.
Sent from my DROID RAZR using xda app-developers app
Thanks for the response. I was finally able to get into the bootloader using the instructions you gave me and selected the AP fastboot. Unfortunately, the power button + volume key method wouldn't work and now the battery is dead. I have since plugged it in but now it won't charge and the utility says the battery is too low to run it. Whenever I pull the cable out it gives me the battery symbol with a question mark inside. I'll leave it plugged in over night and hopefully it gives me something.
Moosiah said:
Thanks for the response. I was finally able to get into the bootloader using the instructions you gave me and selected the AP fastboot. Unfortunately, the power button + volume key method wouldn't work and now the battery is dead. I have since plugged it in but now it won't charge and the utility says the battery is too low to run it. Whenever I pull the cable out it gives me the battery symbol with a question mark inside. I'll leave it plugged in over night and hopefully it gives me something.
Click to expand...
Click to collapse
I don't think that's gonna work, you might want to check this out. I think you're going to need it.
http://forum.xda-developers.com/showthread.php?p=20521609
There is also an alternative method, but I couldn't find it.
Sent from my DROID RAZR using xda app-developers app
I saw this method earlier and was hoping I didn't have to go this route. But, it looks like this is my only option short of calling customer service, bs'ing them on why my phone is acting up, and hopefully not get charged full price for a replacement.
Thank you for the help. Next time I'm going to take the time and read up on everything I need to know before I start modifying.
No problem, let me know how it turns out
Sent from my DROID RAZR using xda app-developers app
Update:
I had tried to make my own Motorola Factory Cable but my skills with soldering and such are sub-par so I decided to order a pre-made cable from a Chinese company on Ebay. After a month I finally got the cable today and it works like it should. After going through the steps my Razr boots into AP Fastboot mode. It tells me the battery is okay and is ready for programming. I downloaded the ICS fastboot file and RSD Lite 5.7. When I go through the steps with RSD it loads the files but it won't recognize my device. I repeatedly hit the buttons but nothing shows up. I re-installed it but the same problems persists. If I understood the directions correctly I need the Motorola Device Manager in order to get the USB drivers on a pc (using a friends comp, don't have one of my own atm). I installed it from Motorola's page but when I plug in my Razr nothing pops up. I've tried to find the drivers online but all the links I have found direct me back to the Motorola page. Is there a way to get the drivers without connecting my phone to a computer?
Did I follow the directions right? Is there something I am completely missing?
For a recap. I fubar'd my Razr, it won't charge that is why I needed the "factory cable", battery is okay, but when I connect with either this cable or a normal micro-usb cable the comp won't even see that it is there.
Edit: I was finally able to download the USB drivers from Matt's Razr Utility 1.7 and then RSD was able to recognize my phone. I was able to flash ICS back onto the phone and now I have a fully functioning RAZR. Curious though, I was made to understand that when I flashed the OS that everything would be erased and I would start over. When my phone turned on it brought me back to the state I had it before it bricked. It was still rooted.
awedel said:
I recently performed the steps to update my RAZR MAXX (XT-912 CDMA) to the OTA JB update. I had no issues. I obtained Root privileges and installed the most recent version of Safestrap for my phone (3.11). No problems detected. I then booted into Safestrap recovery and created a new ROM slot. Installed Jellycore V1.5 to it as well as Gapps. Booted to that slot and NOTHING. The screen just goes black after the Safestrap screen. So I booted back into Safestrap recovery and tried to restore my backup to that slot...same result. When the phone is rebooted, it goes to the Safestrap screen where you can select continue or recovery. If I continue (by selection or waiting the 10 seconds) the screen just goes black. I left it that way overnight thinking it might take a while but no. I've tried reinstalling Safestrap, different ROMS, and reinstalling ROMS. Any ideas? Because I need my AOKP.
Sent from my DROID RAZR MAXX using xda app-developers app
Click to expand...
Click to collapse
okay soo i found this thread and it only had 2 members and sorry if this is a no no,
but i didn't get a reply so i thought i would start a new thread
.. above is the problem that the original thread was created for and below is my problem
..bear with me, i am new to rooting the razr maxx ... i have rooted an htc thunderbolt, 3 gNexs, 2 nexus 7, and 2 galaxy s3s but i am havingw trouble with problem very similar to yours... but with a twist, i cant seem to remember all the the steps i took to produce this problem, as i was rooting my buddies razr maxx over super bowl weeekend and havent picked it up since ..... til now ... but anyways .. i did obtain root and had safestrap 3.11 installed... ok for starters the phone for one will not power on at all unless i plug it into a charger ... and when i do that i see the dual core screen and then it brings up the safestrap diabled screen and gives the option to press the menu button to reboot into recover or press the search button (or wait 10 seconds) to continue... when i press the menu button it goes to the black screen like u said ... when i wait 10 seconds it goes to the black screen and when i press the search button it goes to the black screen ... and then i end up having to use the volume down and power button to power it off (or if i unplug the charger it also powers off) ... when i plug it in again it automattically turns on and goes to the dual core screen and starts the process over ... i am however still able to get in to the boot menu ... and i tried to go into recovery mode that way and now the screen is stuck on the dual core screen with it plugged into the wall charger.... im thinking i have multiple issues ... one battery issue and i must have went wrong somehwere trying to flash a rom ...but wnho knows .. not me lol .... please please help ... we can do a google hangout and try to resolve this issue if you are willling ..... thanks in advance
funkme021 said:
okay soo i found this thread and it only had 2 members and sorry if this is a no no,
but i didn't get a reply so i thought i would start a new thread
.. above is the problem that the original thread was created for and below is my problem
..bear with me, i am new to rooting the razr maxx ... i have rooted an htc thunderbolt, 3 gNexs, 2 nexus 7, and 2 galaxy s3s but i am havingw trouble with problem very similar to yours... but with a twist, i cant seem to remember all the the steps i took to produce this problem, as i was rooting my buddies razr maxx over super bowl weeekend and havent picked it up since ..... til now ... but anyways .. i did obtain root and had safestrap 3.11 installed... ok for starters the phone for one will not power on at all unless i plug it into a charger ... and when i do that i see the dual core screen and then it brings up the safestrap diabled screen and gives the option to press the menu button to reboot into recover or press the search button (or wait 10 seconds) to continue... when i press the menu button it goes to the black screen like u said ... when i wait 10 seconds it goes to the black screen and when i press the search button it goes to the black screen ... and then i end up having to use the volume down and power button to power it off (or if i unplug the charger it also powers off) ... when i plug it in again it automattically turns on and goes to the dual core screen and starts the process over ... i am however still able to get in to the boot menu ... and i tried to go into recovery mode that way and now the screen is stuck on the dual core screen with it plugged into the wall charger.... im thinking i have multiple issues ... one battery issue and i must have went wrong somehwere trying to flash a rom ...but wnho knows .. not me lol .... please please help ... we can do a google hangout and try to resolve this issue if you are willling ..... thanks in advance
Click to expand...
Click to collapse
Okay okay.
Sounds like you got a flashing problem.
Go back to stock via RSD Lite and restart the procedure.
Also i would recommend u using BMM
Tell me your progress (PM or post here)
C ya !
Sent from my Galaxy Nexus using xda app-developers app
Yeah I like to flash that's my flashing problem HAHAHA .. I appreciate the help and yes I will definitely keep u update but it won't be til later on ... Otw to a job interview ... WML! But I am on familiar with RSD and BMM would you to be my best bet to catch up with my lack of knowledge?
okay the only problem i have is that the phone wont boot up in fastboot mode unless i have it connected to a wall charger as the computer usb port doesnt charge it fast enough ... and it shuts down if i unplug it from a wall charger ... and to run RSD you have to be in fastboot mode ... any ideas on a work around?
Connect to wall charger and wait for full charge ... if still shutting down you have a battery issue.
navi7512 said:
Connect to wall charger and wait for full charge ... if still shutting down you have a battery issue.
Click to expand...
Click to collapse
I must have a battery issue which is very weird because I didn't prior to the problem
If it's a battery issue this should help you flash and the restore your phone it's a lifesaver I have 1 and it works even if I don't have a battery plugged in... http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm