Modem For ICS - Fascinate Q&A, Help & Troubleshooting

I am run running AOKP Milestone 6 with the Devil Kernel. I switched from the stock modem to EC09 because all I hear are good things about the modem. My signal strength actually decreased from -91 to -93. What other Modems are there that I should try. My 3G was really slow with the stock modem, so I am looking for the fastest speed.

asf1187 said:
I am run running AOKP Milestone 6 with the Devil Kernel. I switched from the stock modem to EC09 because all I hear are good things about the modem. My signal strength actually decreased from -91 to -93. What other Modems are there that I should try. My 3G was really slow with the stock modem, so I am looking for the fastest speed.
Click to expand...
Click to collapse
Droidstyle's guide (which you may have used) listed the modems he recommended the most (EH03, EC09, and I don't remember the other). I believe your choices might be somewhat limited by the network your on (Verizon vs. someone else), but I could be wrong.

From what I understand the EH03 (stock GB) is the fastest, so if you're not getting good speed it could be just the network like Aesrys already pointed out. Just try them all and see if any show improvement for you, if they don't then it's probably just your area. Also, have you updated roaming lately? Try *22891 which when dialed will download an updated roaming list to your phone, possibly providing better reception. When I did it I actually noticed a better signal at my house. Not sure if it'll help data too, but hey worth a shot.

I'm currently EC09 which i was running back on eclair ,,, and i also tried EH03 too,,, i actually never ran any gb roms,,, went straight to ics,,, and tried both EH03 & EC09 and the building i work in (a real tin can) just kills signal... It does seem to be very slightly better on jb roms but i finally got a decent wifi router so I'm real happy with that,,, ,,,anywhere else outside of work i get good enough 3g signal too do all i want to do...
I could and can navigate w/Google maps great,,, surf web/twitter/fb,,,etc on 3g during lunch
Before jellybean I was considering greeting a newer Samsung phone in hopes of a better 3g signal,,, but I'm glad i upgraded to jb and wifi..:thumbup::thumbup:
Sent from my SCH-I500 using xda app-developers app

Related

Modem?

Hey im currently on phiremod V3 ..which is awesome by the way.. but I was on one forum and they was talking about KA5 and KA1.. Im talking it those are different modems? Can anybody explain the difference between modems...
Sent from my phiremod Vibrant using XDA Premium App
differnet modems have different battery life and signal strength
kb5 is the newest so its suppose to be the best but iv been on ka7 most of the time and havent noticed much difference
ka7 works fine for me
Ka7 came preloaded with my cm7 but it keeps losing signal but i flashed kb5 and it works better no random signal loss so i would recommend kb5
Sent from my CM7 vibrant
I want to say that the different modems help the phone determine how it searches for and utilizes the signal that you are connecting to. It's interesting how something software based can make a difference between a poor signal and/or data speed. Obviously, this is assuming that you're in an area with decent coverage to begin with. =P

CM ROM and Telus Reports Network as 302220....but

I have not noticed anyone mention this before, but anyone on the Telus Network who flashed CM ROM on their phone know that your network reports as "302220" and not "Telus"
I have a bunch of modems I'm flashing to test out the speed I get on mobile data, wifi, and signal. Over the past I've flashed maybe 15 different modems. I was suprised just now when I flashed "I9000BVJV2" and the network now says "Telus" and not "302220"
I've never really cared about it, but I've tried various things with files in the phone trying to make it say telus, for sole sake to see if I could make it say Telus. Atleast I now know that it's really no phone settings that I can change.
-Maniac
Edit: Seems to have fixed the whole 302220 issue all together, all modems I flash now show as Telus.
How well is the JV2 modem working for you?
wasn't that great... what Im doing is take a few modems.. throw em on my phone.. flash and use it for a few days and narrow it down to the better one.
I usually start with doing some speedtest.net tests... the best ones I've found were the Telus JL3, 450K down/400K up... LKG2, 250K down/260K up. LKG2 is the stock that came with the GB update.
Right now I'm settled on Testing out the JVS, KC1, KG3.... both the KC1, KG3 give me 550+K down/500+ up on the speedtests. It was nice constant too.
can you please post back whichradios give you the best battery life? at sfu or a place with a large roof, I get large amounts of battery drain from time without a signal. currently on cm converted i9000 from fascinate with xxjvk
KC1 has been the best for me, not much better then the others or the stock gb modem from telus... but it is better.

UCLD3 vs UCLE2 ?

I noticed E2 is way faster. BUT big but, E2 has way worse reception.
Am i the only one?
I was on Jersey Shore today and I couldn't get any data working.
If that is the case for you, then you could flash a different modem I suppose.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 Beta-5
I seem to have better reception.
Sent from my SAMSUNG-SGH-I717 using XDA
I've noticed way faster data speeds on E2. I used to see about 2 down, now I see about 6 down. And I've had no signal issues, always 4 or 5 bars. Afaik, different modems can give vastly different performance for different people. All depends on your area and what not. Just experiment with the various modems. I'm just glad Samsung finally got one right for my area, as I've only ever seen about 3 down on any phone I've owned until now.
Sent from my GT-I9300 using Tapatalk 2
The AT&T version of both of those modems, which is all us Canadians have access to thus far, has, for me, had much worse data speed numbers (non LTE anyway) on the Telus network than the stock GB Telus modem.
The E2 modem is, in my very non scientific testing, slightly slower for us here in Canada. (again, HSPA only, no LTE coverage here yet)
I'd really be interested in understanding what is actually different between carrier modem implementations. I noticed a similar speed differential in the stock modems.
I tried adjusting the RF preferences but that doesn't solve it. Its almost like AT&T doesn't have the same implementation of HSPA+ as the Canadian carriers.
I say all that with some degree of confidence in the numbers... having installed a variety of ROMs n modems and the results from the stock Telus modem are consistently better when I can use it.
Currently on the One Beta and associated LE2 modem, it shows very wonky "bars" by times...like none, in what should be solid five bar area.
My fourth floor office which never wavered from five bars on stock.. Consistently now shows any where from 0 to 3... But it still transmits and receives calls and data.
A buddy of mine is testing the Telus 4.0 release with Premium Suite... so in any event, it shouldn't be too much longer.
Sent from my SAMSUNG-SGH-I717 using XDA
is it really that much faster? ive yet to upgrade from UCLD3 because its just running fine, wanted the next time i update my phone to be the last (offical ICS since i doubt we will get a update any time soon after that)
I noticed a big difference in speed. UCLD3 used to stutter a lot and freeze up from time to time for no apparent reason. Haven't had any of those issues with UCLE2. Also, bugs that annoyed me in UCLD3 were fixed in UCLE2. I don't see any reason not to flash UCLE2.
I've been having a bug on ucle2 where I cant keep a wifi connection for in app downloads resulting in the download stopping I've tested on multiple ucle2 roms and confirmed no issue on ucld3 not sure how I got so special because I haven't seen anyone else report this that I know of
sam.jh said:
I've been having a bug on ucle2 where I cant keep a wifi connection for in app downloads resulting in the download stopping I've tested on multiple ucle2 roms and confirmed no issue on ucld3 not sure how I got so special because I haven't seen anyone else report this that I know of
Click to expand...
Click to collapse
That actually happened to me. I reverted to D. Seems not as crazy fast but stable. With E I got 1mB (that's bytes) per second. D tops at about 600.
sam.jh said:
I've been having a bug on ucle2 where I cant keep a wifi connection for in app downloads resulting in the download stopping I've tested on multiple ucle2 roms and confirmed no issue on ucld3 not sure how I got so special because I haven't seen anyone else report this that I know of
Click to expand...
Click to collapse
Wifi is great here stays on all day..no problems yet im in day4 or5 lol
sent from team perfections ics rom
JB calhoun said:
Wifi is great here stays on all day..no problems yet im in day4 or5 lol
Click to expand...
Click to collapse
my wifi performs completely fine until I try to do an in app download such as gta3, modern combat 3, order and chaos etc etc.. couldn't figure out why I'm the only one, did full wipes clean installs tried flapps and apps ucle2 roms, even when I went to CM9 which uses the ucle2 kernel I had the problem.. so frustrating lol then go back to ucld3 and problem never shows up once

NO, T-MO KID, VKL1 or Telus does not work on i717...

I don't know why everyone is claiming that these 3 radio packages enable 3G on the i717. I've tried all 3 and twice each from different sources. I CWM the ATT radio back on it and it's returned to 2G.
I would've bought the N7000 and not taken the risk on an international sim not liking all the hackdoolery going on in my phone. Now I have that concern PLUS I'm not getting the 3G that was the deciding factor in the N7000/i717 decision.
Any thoughts? Perhaps I am missing a setting or something? All I get with the 3 non ATT radios is a little x in the greyed out signal meter /|
If you followed the directions correctly you should be getting 4G on the 1700 band. It does work because I am currently using it. Maybe your area has bad signal?
hmmm
It probably does work. The signal is 2G 5 bars, this is elevated in Manhattan, there's always good signals from all carriers. The meter reads /x| though. I tried the only available settings after installing each of the radios, GSM or GSM/LTE and perhaps one other.
I lose the IMEI with the non ATT radios. No signal. Nothing. As soon as I flash ATT it goes to 5 bars of wonderfully slow 2G...
I've finally got settings, accounts and apps installed so I might try flashing a radio again but I'm exhausted of much else.
I really don't know what could be wrong. Perhaps its the wicked humidity and the lingering high toxicity thick gaseous farts making the air heavy and my mind less clear. It really screws up my zen.
neko_tensai said:
It probably does work. The signal is 2G 5 bars, this is elevated in Manhattan, there's always good signals from all carriers. The meter reads /x| though. I tried the only available settings after installing each of the radios, GSM or GSM/LTE and perhaps one other.
I lose the IMEI with the non ATT radios. No signal. Nothing. As soon as I flash ATT it goes to 5 bars of wonderfully slow 2G...
I've finally got settings, accounts and apps installed so I might try flashing a radio again but I'm exhausted of much else.
I really don't know what could be wrong. Perhaps its the wicked humidity and the lingering high toxicity thick gaseous farts making the air heavy and my mind less clear. It really screws up my zen.
Click to expand...
Click to collapse
What ROM are you using with the modems? I am on OnlyOne B4 with KID ICS modem from tspx23. I'm getting 3g speeds. It makes a difference what ROM you are on because of the UCLD or UCLE based ROM. There are a lot of different modems for ICS but make sure you got the right one for the right ROM. You should at the very least get above EDGE speeds.
......
Android 4.0.4
kernel version
3.0.8-perf-I717UCLE3-CL577875
cYANOGENmOD
H0TW1R3.R5-9.0.0-rc0-QUINCYATT-unofficial
Build imm761.ucle3
The radios were from xda and another site. its on stock radio now. If you could refer me to the radio I need, I'll give it a try. I'm unsure about doing it before the weekend as this caused 1 day of downtime midweek so.... I need to get busy! I'll give it a whirl this weekend unless I feel brave this evening.
The leaked sll radio or the blaze 4g found in this thread should work...I'm in NY and they work fine, just not 100% stable
http://forum.xda-developers.com/showthread.php?t=1573568
Sent from my SAMSUNG-SGH-I717 using XDA
neko_tensai said:
Android 4.0.4
kernel version
3.0.8-perf-I717UCLE3-CL577875
cYANOGENmOD
H0TW1R3.R5-9.0.0-rc0-QUINCYATT-unofficial
Build imm761.ucle3
The radios were from xda and another site. its on stock radio now. If you could refer me to the radio I need, I'll give it a try. I'm unsure about doing it before the weekend as this caused 1 day of downtime midweek so.... I need to get busy! I'll give it a whirl this weekend unless I feel brave this evening.
Click to expand...
Click to collapse
You are using an UCLE3 ROM but to my knowledge, all the modems that are out are for UCLE2. I know it's troublesome, but I would suggest trying a new ROM based off of UCLE2 or even gingerbread to see if you can get a nice full speed 3g on Tmobile. That way at least you know the hardware and radio is good. I like AOKP, but for now I'm using OnlyOne B4 (B5 should be out tonight with some more Galaxy S3 goodies) See my signature.
This is Jeet92's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1573568
This is Tspx23's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1679722
......
That works much better than the stock radio.
I feel very stupid for paying $924 for that iPhone 4S 64GB factory unlocked that I had since December. It was cool getting it direct from Foxconn though.
This makes everything ok. Thank you.
deliriousbb said:
You are using an UCLE3 ROM but to my knowledge, all the modems that are out are for UCLE2. I know it's troublesome, but I would suggest trying a new ROM based off of UCLE2 or even gingerbread to see if you can get a nice full speed 3g on Tmobile. That way at least you know the hardware and radio is good. I like AOKP, but for now I'm using OnlyOne B4 (B5 should be out tonight with some more Galaxy S3 goodies) See my signature.
This is Jeet92's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1573568
This is Tspx23's version for ICS (works with UCLE2)
http://forum.xda-developers.com/showthread.php?t=1679722
Click to expand...
Click to collapse
There is no UCLE3 as far as I know
.....
It is UCLE3.
Whatever this variant it is, it doesn't have Japanese language support. The SIP support is also gone, I saw another poster mention that too. Its stripped of all the good stuff.
This is certainly not the CM I had on the Evo 4G.... The options on that CM were extensive to say the least. It gave one the best attempt at absolute control of every aspect of the device.
By comparison, the CM9 I have on this Note is only a slight deviation from the stock OS. I'm guessing that all the efforts at custom ROMs are getting rather diverse over the years, or perhaps this one is just not as good as the mainstream ones? I noticed how many models of Android there are as opposed to when it was just the Evo and a couple others, it's definitely had an effect...
Perhaps the best way to describe it is quality verses quantity. The collective "milk" intellect of all the dev's is no longer in the milk jug, it is now spread throughout several hundred coffee cups, very, very diluted.
Please sir, may I have some more? For the Galaxy Note i717???!!!

Low AT&T Signal on Vibrant Slim bean

I was previously on froyo (i think eugene's) for a long time now. I decided to update to JB with Slim Bean. I have a rooted, unlocked vibrant using it on AT&T's network. I flashed stocked with odin then to CM9 then to Slim Bean. I've tried KB1 & KB5 modems along with Semaphore and Devil Kernels without any success increasing the signal. I used to have this problem before on froyo and changed some setting in network which gave much better signal. I usually get full bars where I am at and now after flashing with JB not even 2 bars.
Any tips? There has to be a setting which isn't catching AT&T's network properly.
Anyone using Vibrant on AT&T who knows how to fix the low signal issues with JB?
voltik said:
Anyone using Vibrant on AT&T who knows how to fix the low signal issues with JB?
Click to expand...
Click to collapse
I would try ka7. I would say that it has something to do with the different bands that at&t and the vibe uses. Its odd that its JB specific. I suppose you could also try a captivate/ i9000 modem, maybe kk4.
Paranoid, sitting in a deep sweat...
samsgun357 said:
I would try ka7. I would say that it has something to do with the different bands that at&t and the vibe uses. Its odd that its JB specific. I suppose you could also try a captivate/ i9000 modem, maybe kk4.
Paranoid, sitting in a deep sweat...
Click to expand...
Click to collapse
I tried the kk4, cwm wouldnt even install it or any of the other captivate modems. Also tried I9000 modems but only very few worked in aquiring any signal. But the ones that worked aren't any better than vibrant modems. I just dont remmember how I got better signal before. It's just been too many years and that was I think on Eugene's roms.
Anything else I can try?
The low signal issue isn't the problem right now. For some reason, callers do not hear when I speak for long periods and usually have to call back or wait for sometime. This happens so frequently that the phone is unusable. I don't know if its the kernel or modem. But I've tried several ICS modems. Please can someone help out.

Categories

Resources