I installed KA02 Xperia SSpeed and it worked fine.
I restarted the phone one day after installed font from font installer app, it never turn on since then. It stuck looping at Sony logo.
I sent it to Sony center they said they can't update the software cos it's not the official ROM and changing the motherboard is more expensive than buying a new phone...
What should I do, please help...:crying::crying:
PS. is it possible to use Odin to flash new ROM?
dazehaze said:
I installed KA02 Xperia SSpeed and it worked fine.
I restarted the phone one day after installed font from font installer app, it never turn on since then. It stuck looping at Sony logo.
I sent it to Sony center they said they can't update the software cos it's not the official ROM and changing the motherboard is more expensive than buying a new phone...
What should I do, please help...:crying::crying:
PS. is it possible to use Odin to flash new ROM?
Click to expand...
Click to collapse
most likely one of the following things are wrong.
the kernel/ramdisk is not compatible with the ROM that you have installed.
Make sure that if you are installed a ROM, that you do also flash the corresponding kernel.
You have forgot to wipe DATA (factory reset). If the data in the DATA partition is not compatible with the ROM, is the ROM not able to begin.
Always wipe DATA, when you move between different ROMs.
---------- Post added at 03:25 AM ---------- Previous post was at 03:22 AM ----------
dazehaze said:
...
PS. is it possible to use Odin to flash new ROM?
Click to expand...
Click to collapse
I do not know Odin, but try to use Flashtool.
In case the kernel you are using is including CWM, can you wipe DATA, using it. If not, can you use Flashtool, which you can also use to flash a new ROM (even stock).
Odin are only for Samsung devices only
I had a similar issue whit my x10 changed fonts and it got bootloop so i reflashed the rom and it worked
Sent From My Sexy Sensation Running Aokp.
Download this
http://forum.xda-developers.com/show....php?t=1810108
then copy ftf to flashtool/firmwares
load flash tool and click on the tap with the black lightning and select flashmode n press ok
select the ftf file and tick no final verification then click ok
turn off your phone and hold volume down key and plug in usb cable
then let flash tool instal
dazehaze said:
I installed KA02 Xperia SSpeed and it worked fine.
I restarted the phone one day after installed font from font installer app, it never turn on since then. It stuck looping at Sony logo.
I sent it to Sony center they said they can't update the software cos it's not the official ROM and changing the motherboard is more expensive than buying a new phone...
What should I do, please help...:crying::crying:
PS. is it possible to use Odin to flash new ROM?
Click to expand...
Click to collapse
Reflash with stock rom using flashtool and your device will work fine...
Many tutorials are available and roms also in sola development section
Sent from my MT27I
Hit thanks if I help
dazehaze said:
I installed KA02 Xperia SSpeed and it worked fine.
I restarted the phone one day after installed font from font installer app, it never turn on since then. It stuck looping at Sony logo.
I sent it to Sony center they said they can't update the software cos it's not the official ROM and changing the motherboard is more expensive than buying a new phone...
What should I do, please help...:crying::crying:
PS. is it possible to use Odin to flash new ROM?
Click to expand...
Click to collapse
Just install any rom using flashtool
Sent from my MT27i using xda app-developers app
thanks u guys so much, u just can't install s1boot
dazehaze said:
thanks u guys so much, u just can't install s1boot
Click to expand...
Click to collapse
Install the driverpackage from flashtool:
http://androxyde.github.com/
Sent from my MT27i using xda app-developers app
yeah! i flashed it already. u guys so great thanks :good::good:
Confused
Hey,
I flashed Xperia SSpeed kernel...
My cell stuck on Sony logo..
Well, i flashed Xperia SSpeed ROM too thinking it might be because of different kernel with stock ROM
I couldn't flash Xperia SSpeed ROM because of some Memory partition issue and it seems like i don't know the reason of this brick.
Kernel or ROM?
Try out Humza's post in the previous page about flashing Stock FTF. Just instead of the link he posted, get an FTF for your device. The Dev section contains the info you require And lastly, do you have an unlocked bootloader ? Custom kernels only work with unlocked bootloader.
Let me know if it helps Cheers
Flash the official firmware using flashtool... Make sure your phone is connected to your pc with flash mode which is power off your phone and hold button down before connecting it to your computer...
Sent from my MT27i using xda app-developers app
xperia p
hey,
i have a rooted and unlocked bootloader xperia p. I wanted a custom recovery for my phone so i used the install.bat in the file attached. after i restarted my phone and continuously pressed the volume down key it got stuck on the sony logo. Now its completely stuck. When i plug it into my computer via usb cable the computer doesnt recognise it please helpp..!!!!!!!
Sola Stuck on Sony logo+battery not charging
Hi guys,
I was using munjeni's jelly bean port+ etch04's experimental kernel for sometime and everything was great until yesterday. My battery died out completely and when I plugged it into the charger it turned on and was stuck in the Sony logo. There was no charging indicator. I thought omg so this is what a hard brick looks like. As you know, the sola's battery isn't removable so I thought I was doomed.Tried a hard reset and there was no difference. So I kept it there (plugged in, stuck in the sony logo) for a while, plugged it out and turned it on. Luckily, IT HAD CHARGED even if the charging indicator or display didn't show it. So I tried turning it on but it got stuck on the sony logo as usual. Since the battery had charged a little, I plugged the phone in fastboot mode and flahed etch04's experimental kernel again. But it still got stuck in the sony logo. Then, as a last resort I flashed the stock ICS .54 kernal using flashtool and IT WORKED! (charged with charging indicator and display)
Then I flashed etch04's kernel again and now everything's back to normal.
Here's the stock ICS .54 kernel.
View attachment MT27_6.1.1.B.1.54_KERNEL.rar
Place it in flashtool/firmware folder and flash with flashtool.
Good Luck!
Pakman123 said:
Download this
http://forum.xda-developers.com/show....php?t=1810108
then copy ftf to flashtool/firmwares
load flash tool and click on the tap with the black lightning and select flashmode n press ok
select the ftf file and tick no final verification then click ok
turn off your phone and hold volume down key and plug in usb cable
then let flash tool instal
Click to expand...
Click to collapse
page not found?
dazehaze said:
I installed KA02 Xperia SSpeed and it worked fine.
I restarted the phone one day after installed font from font installer app, it never turn on since then. It stuck looping at Sony logo.
I sent it to Sony center they said they can't update the software cos it's not the official ROM and changing the motherboard is more expensive than buying a new phone...
What should I do, please help...:crying::crying:
PS. is it possible to use Odin to flash new ROM?
Click to expand...
Click to collapse
That app set's wrong permissions to the font file's it mean the system can't access the font it's the important files for user interference. That's y it not booting up. Try to reflash the stock rom. Do a back up of the rom every time u do things like this.!! And don't forged to hit U known wat I'm saying.!!
Sent from My Xperia P with CM11.0-weekly-4...Hit thanks if u think I have helped U.!
Related
Hey so i was trying to install de Cm recovery in mi mini pro
So i need it the busybox thing
I went to the market and downloaded the busybox installer app
After i installed busybox everything was going fine
Until i decided to reboot my phone
When my phone rebooted pop ups started to appear about
Launcher pro not working and dpsmananger not working
And then it said that the process system is not working
What can i do there?
I cant reboot into xrecovery
So please help me!!!
It passes the se screen and the bootanimation
the lockscreen works and the touchscreen too even the freaking screen on off animation works
I think it might have to do with the system files or something
so how can i change this??
Please help i am really desperate!!!!
I tried using seus but it doesnt work either!
Why u want busybox, if u already have xrecovery? Now u must use flashtool!
Sent from my U20i using XDA Premium App
search for flash tools, or try ADB by computer (if the usb debbunggin enable).
datagubben said:
Why u want busybox, if u already have xrecovery? Now u must use flashtool!
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
How do i use if the pc doesnt recognize my phone?
Press the back-button while booting.
Shadow_Android said:
How do i use if the pc doesnt recognize my phone?
Click to expand...
Click to collapse
If debuggin enable, he go recognize your phone, but not use the sdcard.
s0ftcorn said:
Press the back-button while booting.
Click to expand...
Click to collapse
I have tried that a lot of freaking times and it doesnt work!
Im going to leave the battery to drain so the phone completely shuts off and im going to charge it and try again
Somewhere in this forums a way was posted to get into recovery anyways, dunno how it was called :/
Ill try to find that post!
EDIT: i didnt find it!
Hey you rom experts out there help me out!!!
Use pc compagnon and flash the good old stock. Otherwise flashtool may also help you.
I did the same like you few weeks ago and this is the only way.
sent with my mini pro
i had similar problem with my phone.I download 'Update_Service_Setup-2.11.5.6' from sony ericsson and follow the instuctions.I lost my data and revert back to original 2.1 rom but i had a live phone ..Then i had to reflash the rom
You won't loose your data if you carefully do backups when playing around with roms
sent with my mini pro
Use Sony Ericsson Update Service (SEUS) To Reflash Stock rom without Root. That should do it.
Just download it and follow the onscreen instructions.
Hey buddy dload flash tool and the generic 2.1.1.A.0.6 firmaware ftf .....
choose the flash option in flash tool n choose the firmware.....remove the battery of mini pro connect the cable press the back button n holding it insert the battery it will flash the firmware.....
Aju Joy said:
Hey buddy dload flash tool and the generic 2.1.1.A.0.6 firmaware ftf .....
choose the flash option in flash tool n choose the firmware.....remove the battery of mini pro connect the cable press the back button n holding it insert the battery it will flash the firmware.....
Click to expand...
Click to collapse
Thats what i need to know thanks man!
Install SEUS (Sony Ericsson Update Service), dowload it from here -> http://www.sonyericsson.com/cws/sup...ed/updateservice/xperiax10minipro?cc=gb&lc=en
Install Flashtool form here -> http://lmgtfy.com/?q=flashtool&l=1
How to use flashtool here ->http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Download this -> http://www.mediafire.com/?1cvlkty79tdnrl0
Unzip and place the ".ftf" file you have in Flashtool 0.2.9.1 -> firmware
Read the instruction for flashing a Firmware
YES YES YES!!!
I unbricked my phone!!!
Thanks to everyone that helped me!
Good job mate.
If I had a penny for every time I did this...
hey guys, this is my first time i would say i bricked my phone. i need someone to help me my phone has been in 'coma' for nearly 2 days now.
so this happened when i try to apply this mod http://forum.xda-developers.com/showthread.php?t=1306044 and after i carelessly copied framework-res.apk to system/framework using root explorer without setting the correct permissions, my phone automatically shuts off and try to restart but it failed, it stucked on the big sony ericsson logo and 'sony ericsson' text.
i have pull out the battery hundred times and try to reboot my phone normally but it didnt worked it still stucked on the sony ericsson logo.
so can anyone help me please...
what tools/application should i get to fix this?
first of all, i dont want to wipe/lose/factory reset my phone memory data because that would make my phone contacts gone which i never ever want to happen. so please is it possible to backup my contacts somewhere else if wiping is the answer at least??
okay i took a lot of time to type this and hoping someone give me an answer
Hi, what is your model no? and you rooted it?
Sent from my ST15i using xda premium
i use sk17i mini pro as mentioned above and yes it is obviously rooted
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Someguyfromhell said:
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Click to expand...
Click to collapse
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Izzy Stinson said:
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Click to expand...
Click to collapse
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Someguyfromhell said:
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Click to expand...
Click to collapse
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Izzy Stinson said:
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Click to expand...
Click to collapse
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Someguyfromhell said:
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Click to expand...
Click to collapse
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Izzy Stinson said:
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Click to expand...
Click to collapse
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Someguyfromhell said:
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Click to expand...
Click to collapse
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Izzy Stinson said:
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Click to expand...
Click to collapse
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
You should probably get a backup app and backup your stuff or either root again and install CWM and backup that way
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
Well he forgot to tell you that the first boot after every new 'fresh' flash required a little time for the phone to boot because it create cache at the boot animation...
Sent from my SK17a using xda premium
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Actually, i think you could've salvaged your phone without the need of flashing it... If you had access to CWM, you could've put framework file into zip file and flash it with CWM. It helped me once when i got stuck in bootloop after failed installation of a mod
maso321 said:
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Click to expand...
Click to collapse
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
do you know where i may get the software from ?
WORKED LIKE A CHARM !! thank you attemp number 2!
---------- Post added at 11:53 PM ---------- Previous post was at 11:34 PM ----------
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
you my friend are a dangous man !! flashing it now thanks again i got the stock rom
Problem Resolved
I think that is a bootloop problem , you can try this method. It helps http://www.youtube.com/watch?v=v4nfePh0KQc&feature=plcp
I also had this same problem when installing hybrom v17 with lock bootloader and stock kernel. It helped me a lot. Hit thanks if I helped
my neo v cant boot after I flashed sometning in my pureness rom,so I relock the bootloaders n reinstall the system with seus,but it become worse....
my phone cant boot into cwm,I press the power switch then it only show red light but no any respond after that.
m I bricked my phone?Any solution or suggestion?
AfiAzrael said:
my neo v cant boot after I flashed sometning in my pureness rom,so I relock the bootloaders n reinstall the system with seus,but it become worse....
my phone cant boot into cwm,I press the power switch then it only show red light but no any respond after that.
m I bricked my phone?Any solution or suggestion?
Click to expand...
Click to collapse
Download the .ftf file of ics for your region and also download flashtool
and using flashtool flash the ftf file......
Search xda on how to use flashtool...
Hit Thnx if i helped you !!!!
AfiAzrael said:
my neo v cant boot after I flashed sometning in my pureness rom,so I relock the bootloaders n reinstall the system with seus,but it become worse....
my phone cant boot into cwm,I press the power switch then it only show red light but no any respond after that.
m I bricked my phone?Any solution or suggestion?
Click to expand...
Click to collapse
Maybe I am wrong but I write my thoughts.
Your phone had an unlocked bootloader that you relocked and you reipaired it using seus.
So my thought is you got stock kernel via seus back. Stock kernel hasn't got a cwm. You have to reinstall cwm. Another way is to unlock your bootloader again an flash a stock compatible kernel that comes with root and cwm.
Gesendet von meinem MT11i mit Tapatalk 2
1.1)what was that something, that you flashed on pureness rom?
1.2)what do you mean by not booting after you flash that something? Red light? Bootloop? Bootscreen stuck? What? Be specific!
2)now after you flashed it with seus and you have red led, does it blink, does it light only once?
3)is your battery charged?
--
sent from my vacation
i presume that i have a same situation here so im in need of a help also.
heres what happened: my friend who uses xperia neo said that phone offered him a software update and he updated it when prompted. after it has been updated, phone reboot and never again came to life. pc companion and sus recognize phone when i plug it into computer. i tried with restoring stock rom and updating using sus. phone won't boot
then i downloaded .42 fw for xperia neo and flashtool and flashed it, phone never came to life again. everything goes smoothly, comp recognize a phone in flash mode, green led is on, but after it finishes flashing, nothing happens - phone won't boot. someone please help me
thanks in advance xda's
thanks all
I saved my phone,all I did is just kill all my valueable data.......then flash back to stock kernel,make a official update.
Unfortunately I did't make any backup of my previous rom......huge lost...............
Anyway,thx for every1 who replied my post,thanks.
AfiAzrael said:
I saved my phone,all I did is just kill all my valueable data.......then flash back to stock kernel,make a official update.
Unfortunately I did't make any backup of my previous rom......huge lost...............
Anyway,thx for every1 who replied my post,thanks.
Click to expand...
Click to collapse
can u write it down step by step what you exactly did please.. i have the same problem and myu phone wont wake up after i flashed it and i did it several times with sus or with flashtool. and can you provide fw version also that you flashed neo on please?
nervic said:
can u write it down step by step what you exactly did please.. i have the same problem and myu phone wont wake up after i flashed it and i did it several times with sus or with flashtool. and can you provide fw version also that you flashed neo on please?
Click to expand...
Click to collapse
First,I flashed the relock bootloader ftf (sorry,forgot where I downloded it)
Next,I flashed .562 Stock ICS firmware n do a official update using seus (but it still not working)
Then,flash .431 firmware n continue with official update again (finally it work!)
I do these with flashtool...I think the 2nd step is necessary (dont skip).....n.....if u can,hit the 1st thx for me!:fingers-crossed:
Good luck
My sola using MT27i_6.0.B.3.184 before upgrade.
I have unlocked the bootloader before and relock it back to upgrade to ICS.
I upgrade via Sony PC Companion but after I finish upgrade, my Sola now having unlimited bootloop.
It keep loop with uncertain pattern, sometime I restart when apps upgrade, sometime restart at NFC firmware upgrade, sometime able to boot successfully, but it will reboot in few minute later. Most of the time I keep loop within boot animation.
I tried using flash tool and flash the FTF from here --> http://forum.xda-developers.com/showthread.php?t=191426 and still have the same problems.
Anyone facing the same problem or having solution?
I flash back MT27i_6.0.B.3.184 and it work like charm... I wanna ICS badly... Please, anyone please help me :crying:
have you tried to make a factory reset?
ruzumaki said:
My sola using MT27i_6.0.B.3.184 before upgrade.
I have unlocked the bootloader before and relock it back to upgrade to ICS.
I upgrade via Sony PC Companion but after I finish upgrade, my Sola now having unlimited bootloop.
It keep loop with uncertain pattern, sometime I restart when apps upgrade, sometime restart at NFC firmware upgrade, sometime able to boot successfully, but it will reboot in few minute later. Most of the time I keep loop within boot animation.
I tried using flash tool and flash the FTF from here --> http://forum.xda-developers.com/showthread.php?t=191426 and still have the same problems.
Anyone facing the same problem or having solution?
I flash back MT27i_6.0.B.3.184 and it work like charm... I wanna ICS badly... Please, anyone please help me :crying:
Click to expand...
Click to collapse
turn off the phone, then relock the bootloader again using flashtool. do not turn on the phone yet. then update the phone using Sony Update Service.
relock bootloader: http://www.mediafire.com/?1vy473zccyf98sk
Sony Update Service: http://www.sonymobile.com/gb/tools/update-service/
Thread moved to Q & A section, post in the relevant section next time.
hnl_dk said:
have you tried to make a factory reset?
Click to expand...
Click to collapse
Yes, I did factory reset and everything.
LastSoul88 said:
turn off the phone, then relock the bootloader again using flashtool. do not turn on the phone yet. then update the phone using Sony Update Service.
relock bootloader: http://www.mediafire.com/?1vy473zccyf98sk
Sony Update Service: http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
I have tried this method many times already still same. I find out the cause of the bootloop. It is cause by my micro sd card. Once I put micro sd card and it will boot loop. I tried different micro sd card but still same, keep boot loop. Now I take off my micro sd card and it work like charm again. Any idea how to solve this problem?
I am also having the same issue... Did you find any solutions for it?
I'm not really sure, but I think upgrading with Sony PC companion after unlocking your bootloader did this. Try flashing a different Rom like Cyanogen mod or munjeni's jb port and see if there's a difference.
-Download New ICS firmware (6.1.1.B.1.89)
-Download latest flashtool, place the .89 firmware in the firmware folder in flashtool.
-Turn OFF your phone, connect to PC and flash. It will solve all your problems.
uthpala89 said:
I'm not really sure, but I think upgrading with Sony PC companion after unlocking your bootloader did this. Try flashing a different Rom like Cyanogen mod or munjeni's jb port and see if there's a difference.
Click to expand...
Click to collapse
I was not unlocked my bootloader.. I am having this issues from when i did update to ICS(10,54) from GB(184). So it is because of sola ICS firmware.... After my sola warranty over, i did unlock the bootloader and then tried munjeni's JB port... In JB port, i am not faced the issue exactly(i mean it is not reboot every time with memory card)... But still the phone reboots when i played songs in walkman/ watch movie... But if remove the SD card then no issues with walkman or any other app using SD card.. I tried many different SD cards... Still the issue exists... But i have not faced the issue with GB 184 firmware
---------- Post added at 07:49 PM ---------- Previous post was at 07:37 PM ----------
Harshvijay Nirwan said:
-Download New ICS firmware (6.1.1.B.1.89)
-Download latest flashtool, place the .89 firmware in the firmware folder in flashtool.
-Turn OFF your phone, connect to PC and flash. It will solve all your problems.
Click to expand...
Click to collapse
Can you give the link where i can download the ICS firmware(6.1.1.B.89) for Xperia Sola???
Flash new kernel
Yes, munjeni's original kernel had some problems like walkman FC's, launcher redraws etc.
So I flashed etch04's kernel and it sort of fixed that. I'm using v8.0 with ondemandq+sio. for some reason i had wifi problems with the later versions. You should check for yourself.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=2308040
uthpala89 said:
Yes, munjeni's original kernel had some problems like walkman FC's, launcher redraws etc.
So I flashed etch04's kernel and it sort of fixed that. I'm using v8.0 with ondemandq+sio. for some reason i had wifi problems with the later versions. You should check for yourself.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=2308040
Click to expand...
Click to collapse
Thanks a billion... I flashed etch04's kernel and for the past 24 hours... i do not have any reboot... Continuously played audio from my external SD card and no reboot so far... Once again thanks a log for directing me to the etch04's kernel (Experimental Kernal 8.4 i flashed)
Glad I could help
Did u have any issues with wifi with kernel v8.4?
Sent from my MT27i using xda app-developers app
uthpala89 said:
Glad I could help
Did u have any issues with wifi with kernel v8.4?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
No... No issues with wifi.. I am able to connect and browse in my home wifi network... Only difference i felt is my phone somewhat over heats... may be i am over imagining ????...
Its normal for a phone to heat up when browsing. Instal Gsam battery monitor to check your battery temperature if you have doubts.
Sent from my MT27i using xda app-developers app
Sorry... SD card reboot again coming occationally
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
C0ND01N said:
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
Click to expand...
Click to collapse
connect it to SEUS and flash back to stock rom. even i have the same issue
alienwrz said:
connect it to SEUS and flash back to stock rom. even i have the same issue
Click to expand...
Click to collapse
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
alienwrz said:
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
Click to expand...
Click to collapse
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
never flash under low battery... maintain atleast 50% of battery and then flash. i think the method i told dint work since u had low battery... charge it via wall socket and then try my method.
SmG67 said:
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
Click to expand...
Click to collapse
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I will try what u said as soon as I get home. If I save the device 'll try your suggestion Rom and kernel.
Thanks
Sent from my LT18i using xda app-developers app
alienwrz said:
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
Click to expand...
Click to collapse
I hope you chose flashmode when flashing and not fastboot?
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I flashed your ftf it flashed without an error but there isnt any Sony logo or something. It bright a bit and reboot again. What do you think guys?
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
C0ND01N said:
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
Click to expand...
Click to collapse
Do you get a red led when you try to power it on?
SmG67 said:
Do you get a red led when you try to power it on?
Click to expand...
Click to collapse
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
C0ND01N said:
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
Click to expand...
Click to collapse
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
SmG67 said:
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
Click to expand...
Click to collapse
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
C0ND01N said:
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
Click to expand...
Click to collapse
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
SmG67 said:
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
Click to expand...
Click to collapse
I connect to the wallcharger and try to power on but there isnt any Sony Ericson logo. its just 1 moment bright screen and some kind of reboot i guess. Then a bright screen and then dark.
Do you know what is the problem here?