Hello helpful people. I'd like to start by saying I've been rooting and playing with roms for a few years now (all HTCs) and although I've never posted a question before, all your generosity toward other folks with problems has always saved my bacon also. So thanks. However my girlfriend switched from HTC to a GS3 i9300 and have had... challenges... getting CM9 or CM10 nightlies to work 100%. All have been sorted now bar just one niggling problem. The Wifi.
When trying to connect to wifi it will see all APs, let you type in the password but will not finish connecting. The status says Saved but will not actually connect. Using stock or ARHD this is not a problem. Now my research got me to a stage where I can manually initialise the wifi by typing the following in to the terminal (or through adb):
echo murata > /data/.cid.info
chown system /data/.cid.info
chgrp wifi /data/.cid.info
chmod 0660 /data/.cid.info
Restarting the wifi afterwards fixes the problem until the phone is rebooted. I don't really understand what this means or what it does and the fellow who posted this fix simply put that, with no explanation or followup.
Now I know everyone's feelings on doing the research before asking the collective and I feel I've now reached a dead end in my search. So all I'm asking is if someone can at least point me in the right direction of what to look into? Why this could be happening and where to go from here. Of course if someone does know about a permanent fix I'd be grateful to hear it!
Thanks in advance. Thanks for reading.
danfedida said:
echo murata > /data/.cid.info
chown system /data/.cid.info
chgrp wifi /data/.cid.info
chmod 0660 /data/.cid.info
Click to expand...
Click to collapse
GREAT FIX! :good::good::good:
I had the same wifi problem, but I actually didn't have the /data/.cid.info file at all.
now I can easily create it, and connect to any wireless network...! :laugh:
kochen said:
GREAT FIX! :good::good::good:
I had the same wifi problem, but I actually didn't have the /data/.cid.info file at all.
now I can easily create it, and connect to any wireless network...! :laugh:
Click to expand...
Click to collapse
That's great! :victory: I'm curious to know - do you lose the ability again when you reboot the phone? Every time I reboot I have to re-enter those commands.
danfedida said:
That's great! :victory: I'm curious to know - do you lose the ability again when you reboot the phone? Every time I reboot I have to re-enter those commands.
Click to expand...
Click to collapse
yep, every time I reboot I need to create that file.
but since I'm hardly ever rebooting my device, it doesn't really bother me...
danfedida said:
echo murata > /data/.cid.info
chown system /data/.cid.info
chgrp wifi /data/.cid.info
chmod 0660 /data/.cid.info
Click to expand...
Click to collapse
didnt work for me... i put in the codes, but im still getting the same wifi issues.
sabharwal said:
didnt work for me... i put in the codes, but im still getting the same wifi issues.
Click to expand...
Click to collapse
same problem here! i dont have any .cid.info and when i try to put the commands in the terminal i get "permission denied" after the first command..
anyone got an idea? i tried reflashing cm 9.1 and i tried a full wipe and nothing worked..
Hi guys would just like to ask my friend just bought a second hand GTi9300 today wanted to root it but keep sayin error get pit mapping is thier a way around this Please
doc.omar said:
same problem here! i dont have any .cid.info and when i try to put the commands in the terminal i get "permission denied" after the first command..
anyone got an idea? i tried reflashing cm 9.1 and i tried a full wipe and nothing worked..
Click to expand...
Click to collapse
u need to become root.
try this as the first command:
Code:
su -
a
GD748 said:
Hi guys would just like to ask my friend just bought a second hand GTi9300 today wanted to root it but keep sayin error get pit mapping is thier a way around this Please
Click to expand...
Click to collapse
this has nothing to do with this thread!
does someone find a permanent fiix of it ?
what does "murata" means? why is this file for? Having the same issue trying to port cm10 to i9070
The fix works for me!
How to I make it permanent?
why are you using CM9?
I am using 9.1.0 and except the wifi problem there is nothing wrong with it.
Are you trying to say that there will be no more development to 9.1.0 and I should proably upgrade to 10.x anyway ?
I wouldn't use anything lower than 10.1 if you have an i9300 with sds effected internal memory. You should check your memory chip. Read my "important - sds are you affected" thread. Its stuck at the top of the s3 general section
Sent from my GT-I9300 using Tapatalk 2
Oby One said:
I am using 9.1.0 and except the wifi problem there is nothing wrong with it.
Are you trying to say that there will be no more development to 9.1.0 and I should proably upgrade to 10.x anyway ?
Click to expand...
Click to collapse
I just don't understand why you would use ICS when there's JB. and no, of course there will be no more development
Oups... I already upgraded to 10
I haven't yet read the thread but since it appears to work ok, I think it is not affected.
But ...to be sure...let me read it first and I will get back to you.
later edit: is this the recommended thread ? http://forum.xda-developers.com/showthread.php?t=2091045
yes
Ok, you just scared me!
I installed the emmc check and it said:
eMMC chip
Type: VTU00M
Date: 05/2012
FwRev: 0xf1
SGS3 Sudden Death ?
YES, Insane chip .....
Then I run the memory test and:
Congratulations. Test passed
623s,
14.7Gb @24.2Mb/s
This means that I got the bad chip.... but the memory isn't yet affected/corrupted so if I apply the kernel fix....I will my memory be ok in the future?
I still have to read it again to fully understand it.
seems like you didn't read the thread
It only seems that way.
I've updated to the latest Cm nightly 10.1-20130511-Nighly-i9300 that should contain the fix being above the recommended CM 10.1 Nightly 20130109 (i9300 AOSP)
Hope it will be ok and thank you very much for the early warning.
Related
I dunno what's happened but today when I got home from school, my Wifi won't work anymore. It worked perfectly whilst in school, though. I turn my Wifi on, but it won't scan or connect to anything. What should I do? I use MiniCM6 RC1.
i also face this problem and i dunno what to do yet.. my wifi signal does not refresh automatically unless i scan it in setting of refresh my browser.. any one pls help
Oh my god! I should really start googling more! I got my Wifi to work again! What I did was:
I opened up Root Explorer
I went into Data
I went into Misc
I went into Wifi
I deleted the conf file.
I rebooted my phone
Success!
does it will interrupt the phone system??
Theshawty said:
Oh my god! I should really start googling more! I got my Wifi to work again! What I did was:
I opened up Root Explorer
I went into Data
I went into Misc
I went into Wifi
I deleted the conf file.
I rebooted my phone
Success!
Click to expand...
Click to collapse
yo dude! I was having the same prob too! i'll try your solution soon! hope my wifi will work again thanks!!
Theshawty said:
Oh my god! I should really start googling more! I got my Wifi to work again! What I did was:
I opened up Root Explorer
I went into Data
I went into Misc
I went into Wifi
I deleted the conf file.
I rebooted my phone
Success!
Click to expand...
Click to collapse
Does it will interupt the phone system?
epaljr said:
Does it will interupt the phone system?
Click to expand...
Click to collapse
No. It's merely a config wile which contains your added networks and stuff. Just delete it and reboot your phone. You will be safe.
Theshawty said:
No. It's merely a config wile which contains your added networks and stuff. Just delete it and reboot your phone. You will be safe.
Click to expand...
Click to collapse
thanks man XD
I have the same problem and I tried your solution. ITS WORK! THANKS YAHH!
Before wiping config file you can try to forget all the wifi networks. This helps me.
Dudes, wrong section. And that looked a bit like a necrobump of sorts.
Sent from my E10i using XDA App
me also face the same problem and i tried the solution above and last its still happen again... anyone have another better solution for this??
Sufficient to setup the rights and ownership of the file:
adb shell chown system.wifi /data/misc/wifi/wpa_supplicant.conf
This is true permissions for file:
ls -l /data/misc/wifi/wpa_supplicant.conf
-rw-rw---- 1 system wifi 406 Jul 12 21:10 /data/misc/wifi/wpa_supplicant.conf
For me it was enough to delete the last remembered network from the list. The phone started scanning right after that, and never bugged again.
Hi all.
I have got my SGS II for 4 months and i was running it with stock rom and CF kernel. Yesterday, I was comming home from chrismas and was asked - as usual - to turn off my phone on the plane. Put it in plane mode and shut down.
Turned on for some series watching, turned off for arrival.
After that, my phone quit working: no SIM could be detected. After some research, I realized that my IMEI was set to 0 and Phone: unknown. I went back right away to stock, but it did not help.
By the time I flashed, i had no idea that efs folder did not came with cwm backup, so i have no backup of working efs folder.
I have some files on EFS folder, but i have no idea of what is "good" folder.
Can somebody point me to some direction?
I heard about some miracles perfomed by ODIA user, hehehe.
Thanks in advance.
Try this thread.
I did...
But I still cannot have access to change the efs files/dir. And still didn't figured how to have write access for these. Could you enlighten me?
Thanks!
To get write access you need to use a file explorer like Root Explorer (or similar) from the Market.
PauloSherring said:
But I still cannot have access to change the efs files/dir. And still didn't figured how to have write access for these. Could you enlighten me?
Thanks!
Click to expand...
Click to collapse
Are you getting "permission denied" and/or "read only filesystem" errors?
I take it you ARE running all commands with root priviledges?
It is working!
Thanks people! I've been struggling with this problem for only two days, but it feels like months! I needed to umount the /efs unit and mount again with other accesses priorities (r/w, i.e.).
In fact, this thread: http://forum.xda-developers.com/showthread.php?t=1261948&page=5 was the reason for me achieving this.
i had the same issue with my galaxy,
https://market.android.com/details?...GwsMSwxLDEsImNvbS5oZWxyb3ouR1NJSV9SZXBhaXIiXQ..
this utility helped me to fix it.
Thanks to Helroz
Glad you got it working Paulo I can imagine it would be pretty stressy to have a working phone one minute and a reboot later no IMEI.
PauloSherring said:
Thanks people! I've been struggling with this problem for only two days, but it feels like months! I needed to umount the /efs unit and mount again with other accesses priorities (r/w, i.e.).
In fact, this thread: http://forum.xda-developers.com/showthread.php?t=1261948&page=5 was the reason for me achieving this.
Click to expand...
Click to collapse
This is the Q&A topic for [thread="20962941"]GTabCombOver[/thread].
Does flash player work on this rom?
I think only opera browser
Best HC Yet
I really like this ROM. Couple of items of note that i have seen. My Wifi started to error out. I have tried fixing it, but it still just reports error. I am going to try pershoots kernel. I had issues before with Clems HC kernel. Second I tried inserting a USB disk, and the status bar says USBDisk2 inserted, but it does not appear to be mounted.
Flash
AeroToxin said:
Does flash player work on this rom?
Click to expand...
Click to collapse
Flash works for me in Opera, but it can be a bit touchy.
What version of opera and flash are you using? I downloaded opera mobile 11.1 because 11.5.3 gives me problems, I'll put in a url, push enter, and whatever I type goes away it tries to load the page and just stops (like I pushed cancel on loading the page). Then I was gonna download flash 10.3 and opera started acting up made the tablet slow and had to reboot.
USB and Wifi
markmac said:
I really like this ROM. Couple of items of note that i have seen. My Wifi started to error out. I have tried fixing it, but it still just reports error. I am going to try pershoots kernel. I had issues before with Clems HC kernel. Second I tried inserting a USB disk, and the status bar says USBDisk2 inserted, but it does not appear to be mounted.
Click to expand...
Click to collapse
Does turning it off and on fix the wifi?
I'll look into using a usb disk soon.
No just keeps going into an error state. It seems to be after modifying the WPA_Supplicant with Root Explorer, is when it errors. For work, my company uses LEAP and this is the only way i know of to get it to work. I have done it a hundred times with different ROMs. For some reason unless i leave the wpa_supplicant unmodified, it goes into error. I have double checked and re-checked to see i haven't made any mistakes.
markmac said:
No just keeps going into an error state. It seems to be after modifying the WPA_Supplicant with Root Explorer, is when it errors. For work, my company uses LEAP and this is the only way i know of to get it to work. I have done it a hundred times with different ROMs. For some reason unless i leave the wpa_supplicant unmodified, it goes into error. I have double checked and re-checked to see i haven't made any mistakes.
Click to expand...
Click to collapse
That would probably be the reason. GTabComb has a different wpa_supplicant from most ROMs, so it might not be compatible with the modification you are using. Can you give me more details on what you are doing to modify it?
Sure. Basically I was adding the network, from the Settings applet to use 802.x. I would then modify the supplication to look like the following with Root Explorer:
Network={
ssid=”<networkname>”
scan_ssid=1
key_mgmt=IEEE8021X
auth_alg=LEAP
eap=PEAP
identity=”<domain>\<username>”
password=”<password>”
phase2=”auth=MSCHAPV2”
}
Only after i modified it did it error. Before i modified, the entry was still there, but in the default form which didn't work.
Let me know if there is anything i could test for you. This is the only thing holding me back from finally being happy with an HC ROM.
markmac said:
Sure. Basically I was adding the network, from the Settings applet to use 802.x. I would then modify the supplication to look like the following with Root Explorer:
Network={
ssid=”<networkname>”
scan_ssid=1
key_mgmt=IEEE8021X
auth_alg=LEAP
eap=PEAP
identity=”<domain>\<username>”
password=”<password>”
phase2=”auth=MSCHAPV2”
}
Only after i modified it did it error. Before i modified, the entry was still there, but in the default form which didn't work.
Click to expand...
Click to collapse
Is that the entirety of your wpa_supplicant.conf file or only a fragment? Because, there are other parameters missing, and it says "Network=..." instead of "network=...". Not sure if case matters in the wpa_supplicant.conf file, but, it is something to check.
A detailed debug output would help in troubleshooting your problem. Get it by doing this in CWM:
Code:
$ [B]adb remount[/B]
$ [B]adb shell mv /system/bin/wpa_supplicant /system/bin/wpa_supplicant.bin[/B]
$ [B]adb push wpa_supplicant /system/bin/wpa_supplicant[/B]
$ [B]adb shell chown root.system /system/bin/wpa_supplicant[/B]
$ [B]adb shell chmod 755 /system/bin/wpa_supplicant[/B]
Use this shell script as the wpa_supplicant to push:
Code:
#!/system/bin/sh
exec /system/bin/wpa_supplicant.bin -ddd "[email protected]"
Collect the logs like this:
1. Power off gTab.
2. Connect USB cable.
3. Run "adb logcat -v time > logcat.txt" in a CMD.exe window.
4. Power on gTab.
5. Kill the adb logcat or shutdown tablet after WiFi has errored out.
This will collect all the logs right from the beginning.
That was just the section I edited. I don't have my cable with me so i can't run ADB right now. I did just do the same thing on Flashback and it worked, but I prefer to run GtabCombOver.
heapsize
What app can I use to change the heapsize? Also, dumb question.... What app should I use to adjust the overclocking?
markmac said:
I did just do the same thing on Flashback and it worked, but I prefer to run GtabCombOver.
Click to expand...
Click to collapse
Try using the wpa_supplicant binary from Flashback, then...
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
cgingermany said:
What app can I use to change the heapsize?
Click to expand...
Click to collapse
Just edit /system/build.prop and change dalvik.vm.heapsize.
awesome, thank you! I'll give that a shot. On the dev page someone there said switching those up a little was helping with overall performance so I'll give it a shot and let you guys know. Thanks again.
gtabcombover said:
That would probably be the reason. GTabComb has a different wpa_supplicant from most ROMs, so it might not be compatible with the modification you are using. Can you give me more details on what you are doing to modify it?
Click to expand...
Click to collapse
Actually, I'm having the same problem, and I haven't made any changes to wpa_supplicant.
The only way to get WiFi functioning again is to reboot the device. I can't turn off WiFi, because it just keeps saying "Error." I even tried going into airplane mode, but it made no difference.
In my case, the problem seems to be related to the fact that I've changed the setting for the wifi disconnect policy to "Never when plugged in." I don't remember having this problem prior to making that change.
I've changed it back to "Never" and will report on whether the problem persists.
dagwud said:
Actually, I'm having the same problem, and I haven't made any changes to wpa_supplicant.
The only way to get WiFi functioning again is to reboot the device. I can't turn off WiFi, because it just keeps saying "Error." I even tried going into airplane mode, but it made no difference.
In my case, the problem seems to be related to the fact that I've changed the setting for the wifi disconnect policy to "Never when plugged in." I don't remember having this problem prior to making that change.
I've changed it back to "Never" and will report on whether the problem persists.
Click to expand...
Click to collapse
Mine wont connect at all....... What am I doing wrong?
dagwud said:
In my case, the problem seems to be related to the fact that I've changed the setting for the wifi disconnect policy to "Never when plugged in."
Click to expand...
Click to collapse
Very unlikely.
Will need to look at logs to determine the actual cause of your problem. See post #12. Also get the kernel messages using:
Code:
C:\> [B]adb shell dmesg > dmesg.txt[/B]
---------- Post added at 09:30 PM ---------- Previous post was at 09:23 PM ----------
cgingermany said:
Mine wont connect at all....... What am I doing wrong?
Click to expand...
Click to collapse
Do a basic check. Look at the wpa_supplicant.conf file and see if it looks OK. As a minimum, for home networks, check that the ssid= and psk= values are correct:
Code:
C:\> [B]adb shell cat /data/misc/wifi/wpa_supplicant.conf[/B]
Again, will need to look at logs to find out what's wrong.
rajeevvp said:
Very likely.
Will need to look at logs to determine the actual cause of your problem. See post #12. Also get the kernel messages using:
Click to expand...
Click to collapse
I haven't had time to do as you've requested. However, restoring the setting to the "default" has alleviated the problem. The device appears to be turning off WiFi after a period of time, since it's often had to reconnect after I turn the screen back on.
I'll get to the logs when I'm at my computer and have the time to wait for the wifi error.
I would like to think I am very familiar with GNU/Linux/UN*X permissions, but I don't have the foggiest idea as to what "fix permissions" does in Android recoveries and apps.
Is anyone willing to give an accurate overview of what's happening? If so, please do. Finally, can anyone point me towards some opensource code that implements such a task? That would be most appreciated.
Thanks in advance.
exiquio said:
I would like to think I am very familiar with GNU/Linux/UN*X permissions, but I don't have the foggiest idea as to what "fix permissions" does in Android recoveries and apps.
Is anyone willing to give an accurate overview of what's happening? If so, please do. Finally, can anyone point me towards some opensource code that implements such a task? That would be most appreciated.
Thanks in advance.
Click to expand...
Click to collapse
In order not to have applications to affect others, Android creates a new user/group to store data for each app and the permission information is keep in packages.xml. fix_permissions is to ensure permission integrity.
ROM Manager bundles fix_permissions shell script (I am sure others too):
/data/data/com.koushikdutta.rommanager/files/fix_permissions
Tingtan already explained the process of fix permissions and suggested ROM Manager as the shell commander but you can also fix permissions in CWM recovery by going to advanced/fix permissions/yes
Sent from my PC36100 using XDA App
hmmm, not realy clear for newbie like me, can you explain what problem will happen if fix permision ( in CMW ) is needed but i don't do it ?
When I flashed a rom, I always fix permissions at the end, then reboot.. That's how I learned to flash. :thumbup:
You can also fix permissions in rom toolbox under the "manage apps. " Its on bottom, just slide bottom bar to left and you will see it.
Codename FC18
taitrandht said:
hmmm, not realy clear for newbie like me, can you explain what problem will happen if fix permision ( in CMW ) is needed but i don't do it ?
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Fix_permissions
Just found that. Sounds like what tingtan was saying.
Thanks I did not know that I could fix my permissions in Rom Tool Box.
Hello.
I suspect that fixing permissions implementation differs between tools. I suspect some of them doing worse to the system by performing this.
I'd appreciate a suggestion of tool doing this best (ie. no bad impact on system performance)
I just ran this from ROM Manager and thought... oh what have I done now...
I didn't really need to do it or anything. At least it didn't appear to have created issues
But, is it more or less secure now?
problem starting all aps after fix permission
just trying fix permission after flash rom and now my andriod cann't execute launcher and android system.
Nav bar and notification bar still show up, so the only thing i can use is setting menu.
Clear data on apps cann't do either due to, in active button (keep computing size all time)
Any idea how to fix this?
darkfader said:
I just ran this from ROM Manager and thought... oh what have I done now...
I didn't really need to do it or anything. At least it didn't appear to have created issues
But, is it more or less secure now?
Click to expand...
Click to collapse
More secure - tingtan answered that a couple of posts up now hit his thanks button
I am using Phil Touch recovery and for some reason I don't have the option "fix permissions" in the advanced section. Any theories for why?
mafra staue
H0LT3R said:
I am using Phil Touch recovery and for some reason I don't have the option "fix permissions" in the advanced section. Any theories for why?
Click to expand...
Click to collapse
its been removed with 5.10.0 version i think
wyklocnik said:
its been removed with 5.10.0 version i think
Click to expand...
Click to collapse
Guess it's a background process.
Stock Recovery Permission Fix?
How do you 'fix permissions' if you have only stock recovery?
I thought I needed to do this with my Titanium backup file.
I read that you must move the file into the system directory (off of SD Card or EXT SD Card) to do this, however this can be a problem and an inconvenience for such a large file, is there another recommended way of doing this if your Rooted but pure stock?
(Ideally this would alleviate the need to move the file, or at least would take care of the manual process if it's not possible to rectify in place.)
Fix permission?
Guys i have a note 3 sm n9005 and i am running cm12.1 ever since it came out. Well the rom is pretty good and stable but its missing some features on my device like the( on screen nav bar, ambient display , themer for cm themes) and im kinda frustrated cuz they are some nice features to be missing. Anyhow i tried liquidsmooth 4.1 and i did get the nav bar and the other settings, but now im back to cm cuz ls 4.1 has some bugs and again im without these features on cm12.1. Will this fix permissions thing solve the problem?? And if any one knows the fix for it please share it with me. Thanks.
I would like to invite you guys to test my new app Parasol which can solve the permission problem in Android M~
http://forum.xda-developers.com/android/apps-games/app-parasol-alpha-t3190615
Hi there,
Parasol is a new app to solve the permission problem in Android M. Here is the link: http://forum.xda-developers.com/android/apps-games/app-parasol-alpha-t3190615
Just try it and give me some expert feedback. Thanks a lot~
shell script to fix permissions
This is my first shell script but it fixed the permissions on an app that started crashing after I upgraded to android M
it takes the /data/data/XXX folder name as its only parameter
This script only repairs the owner:group of the data files
Please send comments - this script can be used by anyone in any way
Code:
#!/bin/sh
if [ "$1" != "" ]; then
#The folders in /data/data each have a different owner. The next line gets the owner and the strips the whitespace
appusername=$(stat -c "%U" /data/data/$1 | xargs)
#The next line constructs the chown command to repair the permissions for all the files in the target folder
fixperm="chown -R $appusername:$appusername /data/data/$1/*"
#Display the command to the user
echo "$fixperm"
#Uncomment the next line if you would like the script to fix the permission
#eval $fixperm
else
echo "Missing target folder parameter"
fi
I did install Cyanogen Mod 10.1 from the link in the "Free Xperia" thread (stable pollux_windy) today. It actually was an update from a nightly version from some days ago. It works pretty well except the gps, which doesn't work at all. I've done some googeling, but I didn't find anyone with similar problems. GPS worked fine for me with the stock rom, so i guess the chip is working. If i use a GPS tester, it shows that 0 satellites are available. I've not switched back to stock to try if it still works, because I had hoped that i could save all the time.
The positioning system works from time to time, but I guess it is only Wifi positioning. If i deactivate the Wifi positioning, it can't get any gps fix.
What i tried so far:
Stop/Reboot/Restart GPS
Wipe Cache and Dalvik Cache
Reboot again and again and again
Comparing the GPS.conf to the one from the stock rom (they are identical)
This is the first time I tried installing a custom rom, so there is a high chance, I did something wrong, but i would really appreciate if someone told me what it was. And please remember, that i'm quite new to the whole custom rom scene.
Not getting any answers at least tells me the problem is not that simple and I am not too stupid.
I thought till now at least anyone would have asked for details or anything.
Please anyone help! I desperately need the GPS!
Woozar said:
Not getting any answers at least tells me the problem is not that simple and I am not too stupid.
I thought till now at least anyone would have asked for details or anything.
Please anyone help! I desperately need the GPS!
Click to expand...
Click to collapse
Woozar,
working now to understand the problem. You know adb connection (debug mode)??. You know how to create logcat.txt??.
Asap I will tell you if I find the solution....
Regards
I just googled it. I need to use usb debug mode and then attach it to a pc with the android ask installed and run the command
Code:
adb logcat -d > logcat.txt
Do I need adb root access for this?
Shall I upload the file to the thread or send it to you personally?
Woozar said:
I just googled it. I need to use usb debug mode and then attach it to a pc with the android ask installed and run the command
Code:
adb logcat -d > logcat.txt
Do I need adb root access for this?
Shall I upload the file to the thread or send it to you personally?
Click to expand...
Click to collapse
make cold reset on GPS status app Pro
download AGPS
Swicth off the tablet
start adb logcat just after power on the tablet.
open GPS status again, download again AGPS.....
wait for searching in open sky area
only stop it after few min gps status is running...lets say 10 minutes.
press Ctrl+C on terminal mac to stop logcat.txt
send logcat.txt link download to me private.
I will use my and yours to search what is failing...
which CM10.1 running now...me experimental 25/06/13.
Sorry no time now...
I am not allowed to post links, so I need to post it like this.
https ://dl.dropboxusercontent.com/u/11941413/1
I hope I did everything as you wanted me to.
Please let me know if you need anything else.
Woozar said:
I am not allowed to post links, so I need to post it like this.
https ://dl.dropboxusercontent.com/u/11941413/1
I hope I did everything as you wanted me to.
Please let me know if you need anything else.
Click to expand...
Click to collapse
logcat.txt was good, but not usefull info errors.
I sent you private message here.
Regards.
Does this affect all sgp311 or does it work for anyone?
Is sgp 312 or 321 affected, too?
I'm in the same boat and after researching the XDA forums for a while it seems to me that GPS is not working in any of the current custom ROM's for our device. If GPS is important for you you would have to stick to the Stock ROM and wait a little bit more until the developers fix it.
For reference:
---------------------------------
SGP311 - Wifi-only Version (16GB) => CyanogenMod 10.1 (pollux_windy) = No GPS
SGP312 - Wifi-only Version (32GB) => CyanogenMod 10.1 (pollux_windy) = No GPS
SGP321 - LTE Version => CyanogenMod 10.1 (pollux) = GPS is working
---------------------------------
Tip: Some very resourceful user suggested a neat workaround where you could use the GPS from a mobile phone in the tablet. I didn't try it yet but it seems to be a good idea:
http://forum.xda-developers.com/showpost.php?p=43159748&postcount=10
I hope this helps!