***** I posted this just in case if anyone out there facing same problem as mine, "NitroCharger.sh not found" *******
Hello Everyone! I've tried to do very first install CM 7 with Neutrino ROM (I was using Blur Custom Rom before), and I did it with Neutrino ROM V2.9GT
the problem is:
I am confused about executing NitroCharger.sh because I don't even find it in /system/etc (on Neutrino 2.9 GT)
I thaugth I have a bad download files, so I tried to download again, but it brings no differences.
so I tried to find it in the older version (Neutrino 2.8 GT) and I tried to find Nitrocharger in the downloaded zip file (yeah, I find it in /system/etc/)
then, I extract only NitroCharger.sh files from Neutrino 2.8 GT then I put it on Neutrino 2.9 GT /system/etc folder (of course I extract the Neutrino 2.9GT.zip before putting NitroCharger.sh in /system/etc folders)
and finally I can feel the amazing experience provided with this ROM!
Here's the step by step :
1. download Neutrino 2.8 ROM (it doesn't matter EE,GT or GT+ because all we need is the NitroCharger.sh files inside it)
2. extract ONLY NitroCharger.sh that we can found in /system/etc to a new folder (it's up to you what you like to named it, but make it easy ex: NeutrinoNew)
3, extract all files from Neutrino 2.9 ROM you've downloaded to the same folder where's NitroCharger.sh that you've extracted on the step #2
4. after that, copy the NitroCharger.sh files to the /system/etc
5. ZIP that Folder! and ready to flash
6. After Flashing using clean or easy install and 1st boot completed, click SuperSU >>> update SuperSU binary
7. open Smanager then go to /system/etc
choose NitroCharger.sh then check the SU boxes
choose RUN
8. done! time to reboot
I don't know how if you'd install 2.8 first then update it to 2.9, maybe NitroCharger.sh files still in /system/etc folder.
just sharing my way
ps : Sorry, my english ain't really good
or like Notorious states use the OTA updater to update to 2.91 which includes this.
http://forum.xda-developers.com/attachment.php?attachmentid=1262282&d=1345025112
Flash in CWM
Dude... You should've just gone and read the original thread, at least the last 10-15 pages. :facepalm:
NitroCharger.sh is only available as an OTA upgrade to 2.91. However, many people decide they don't want to use it anyway since it's been known to cause stability issues.
squee666 said:
or like Notorious states use the OTA updater to update to 2.91 which includes this.
http://forum.xda-developers.com/attachment.php?attachmentid=1262282&d=1345025112
Flash in CWM
Click to expand...
Click to collapse
Man.. It's weird cuz I have no OTA updater :/
Sent from my Shooteru running on Mwakious Athena + CoolExe
ravilov said:
Dude... You should've just gone and read the original thread, at least the last 10-15 pages. :facepalm:
NitroCharger.sh is only available as an OTA upgrade to 2.91. However, many people decide they don't want to use it anyway since it's been known to cause stability issues.
Click to expand...
Click to collapse
Hello bro, would you share the links of the post cuz I don't find about NitroCharger at original post..
In page 10 and 15 the topic is broken link, no % batt mod, camera, email addon, benchmark and something else but there's no nitrocharger.sh.
Anyway, I reflash my Atrix with new downloaded files and there's OTA updater inside it.. Thank's for the info
Sent from my Shooteru running on Mwakious Athena + CoolExe
Hi you! Sorry for this stupid question but what is the function of Nitrocharger.sh???
this is the first i up Neutrino rom and like you i didn't find the nitrocharger.sh at System/etc!!! ~~!
Related
Can someone please upload a stock kernel zip update file ..I dont want to reflash my phone using kdz just because i tried out some OCed kernels ..Can one of you devs do this if it can be done ...
I'm sure one of the bright minds here can help you with that. but... why do you wnat it? are having trouble with the modified kernel for OC?
2.2 or 2.2.1?
I don't have the time but I can leave the instructions to someone which has:
1- Grab 2.2 or 2.2.1 boot.img (look in Prime ROM for 2.2.1 and Light ROM for 2.2)
2- Unpack boot.img (use dsixda's kitchen for example)
3- Extract the zImage (the file in the first folder with >2MB, it has another name but I don't recall)
4- Get the Amon_RA recovery port for P500, extract contents to some folder
5- Replace the zImage for the one you extracted in the unpacked boot.img (you have to rename it)
6- Zip it again (with no compression)
7- Sign the zip
8- Post link here
@noejn i just switched to your VOID rom from earlier MEgatron one..(btw both roms rock) and i installed that touchscreen-bug fixed kernel posted a few days back ..No there's no EDGE internt Access through phone.
.How do i go abt extracting the kernel From LG's source and making .zip update package for custom recovery????
@noejn i just switched to your VOID rom from earlier MEgatron one..(btw both roms rock and i think both run on 2.2) and i installed that touchscreen-bug fixed kernel posted a few days back ..No there's no EDGE internt Access through phone.
.How do i go abt extracting the kernel From LG's source and making .zip update package for custom recovery????
Check Janitux guide to cook
http://forum.xda-developers.com/showthread.php?t=901417
You will find there tools and how to extract.
sarfaraz1989 said:
@noejn i just switched to your VOID rom from earlier MEgatron one..(btw both roms rock and i think both run on 2.2) and i installed that touchscreen-bug fixed kernel posted a few days back ..No there's no EDGE internt Access through phone.
.How do i go abt extracting the kernel From LG's source and making .zip update package for custom recovery????
Click to expand...
Click to collapse
Check your apn settings ...
Sent from my LG-P500 using XDA App
Been using Franco's Rom and Kernel and it's been great. However, I like to update to his v.14 kernel. I did the format
1. Wipe
2. Partition, etc...
3. Load v5 Rom
4. Restart
My problem is right here, the warning is to delete the tweaks file and the script file (which I don't have one) in File Manager. I use the OI manager that comes with v5 Rom but it just wont' delete, and I don't want to load the new kernel because of all the warnings, please help :-(...
calculus1918 said:
Been using Franco's Rom and Kernel and it's been great. However, I like to update to his v.14 kernel. I did the format
1. Wipe
2. Partition, etc...
3. Load v5 Rom
4. Restart
My problem is right here, the warning is to delete the tweaks file and the script file (which I don't have one) in File Manager. I use the OI manager that comes with v5 Rom but it just wont' delete, and I don't want to load the new kernel because of all the warnings, please help :-(...
Click to expand...
Click to collapse
it wont delete cause of permissions. I use root explorer for this kind of work. In this particular case i had deleted the nececary scrips from the flash zip and i flashed afterwards. (i had a clean install)
I am trying the clean install as well, can you give the instructions or point me to somewhere where I can read more about this, thanks for your time and effort.
Do I just delete it in the Devoid.Franco v5 zip before flashing and then restart the process (the only file that I can find is tweaks.sh)
Sorry, found the init.d file as well. Would I delete those files in the zip, rezip and then start the process over?
you just delete them from the zip and you flash it as usuall. just dont forget to disable verification check on your recovery or else it will give you error
Sorry, just a newb when it comes to this.
I couldn't delete the two files from the devoid.franco.v5.zip file so I did the following:
1. Extract the zip file
2. Deleted the two files
3. Rezipped the files into a new devoid.franco.v5.zip
4. Load the zip into the micro sd card after all the wipe and partition
5. Disabled Signature check
6. Tried the flash and it said it can't open the zip because it's bad :-(...
This can't be that hard when all the other kernels was easy to install...
calculus1918 said:
Sorry, just a newb when it comes to this.
I couldn't delete the two files from the devoid.franco.v5.zip file so I did the following:
1. Extract the zip file
2. Deleted the two files
3. Rezipped the files into a new devoid.franco.v5.zip
4. Load the zip into the micro sd card after all the wipe and partition
5. Disabled Signature check
6. Tried the flash and it said it can't open the zip because it's bad :-(...
This can't be that hard when all the other kernels was easy to install...
Click to expand...
Click to collapse
Extracting a zip and re-zipping it DOESN'T work. You are not supposed to unzip the file. Just flash the rom, delete the offending files using root explorer, and then flash the kernel.
Sent from my LG Optimus One P500 using XDA App
You should't extract the file and rezip it. It corrupts it when it comes to flashing. I personally browse the zip file with winrar and simple delete the files i need. I also add files to zip this way like apks, ringtones etc
Trying winrar and it seems to work, gone to see if I can finish the entire process. Thanks so much for your time again. In the future, can I send the apps that I want directly into this zip? I can to sue something zipsigner before to get calendar, etc... Thanks again!!!
An alternative way for a clean install:
1: wipe everything
2: flash devoid.franco.v5
3: reboot (to check if everything is ok)
4: reboot into recovery
5: mount /system partition under 'mounts and storage' (clockworkmod)
6: from pc type (with phone still in recovery): 'adb shell'
7: in adb shell, type: 'rm /system/etc/tweaks.sh'
8: in adb shell, type: 'rm /system/etc/init.d/00script'
9: flash franco.kernel.v14
10: reboot
I Hope it helps,
Bye
You're welcome m8.
And yes you can have the apps you want inside the rom this way very easilly. just put them in app folder. I did this with some removed apps like browser and calendar and also removed zeam launcher and used adw launcher (personal taste) I even tried that with frameworks (aka themes) and it worked great
Thanks so much to both of your posts, it's working. One last questions, thought setcpu was already implemented in this kernel, but I don't see it anywhere? Again, thanks again for everyone's time and effort, learned so much today (wife is mad though because we need to do house work, lol, lol, better get going)... She said, "who formats their phone 5 times in 1 month, lol, lol"
setcpu is NOT included, you have to install it.
See first post in franco.kernel thread for the link.
Eh! eh! you are not in Europe, I guess if you have to help your wife NOW!!!
Barcelona-ManchesterUTD right NOW...
oh yes the wifes. my gf gets fustrated like "wtf are roms and kernels?? its just a phone!!! you call people and they call you back" rofl
One last note on setcpu. When i was using last version (2.13), every time i rebooted my phone the settings where gone and had to set them again. I switched to v2.1 and it worked like a charm. Have no idea if that is general issue or only me had it. Just thought i should tell you
Done via editing the zip with rar and all worked smoothly.
Thx all
/W
Sorry, I know that this is very basic question, but honestly, I tried searching but couldn't find how to do it!
Basicly, how do I install this battery mod, and how do I know which one to choose?
http://forum.xda-developers.com/showthread.php?t=1064037
I recently updated to 2.3.5 and CFRoot'ed my SGS2 yesterday. No other mods (yet)
Go to settings-> about phone and see what version you have (build number) - KE7/KF1/KF3 whatever.
Download the correct version for your build and copy it to your phone (looks like there are 2 files needed unless you have a bulid number that there is a 'flashable zip' for).
If you rooted using a CFroot kernel then you should have the CWM app installed. Go in there, select install APK and select the files you downloaded (probably need to do one then the other).
It should be as easy as that.
If you have the correct build for one of the 'flashable zips', download that and select 'flash update' in CWM instead.
Okay. That CWM thing helped a lot. There is not KI8 (which is my build version) on the list, is it okay to pick up version for other build?
Not sure if it will work with another build, but you can always try (do a backup from CWM first).
use the updated thread which has the apk for Ki8 for the mod. scroll down to the bottom f the first post to find it.
http://forum.xda-developers.com/showthread.php?t=1197150
I just tried this using CWM and the install doesn't work, so I guess you need to use ADB.
edit: tried using adb and it knackered my phone and sent it into a bootloop. Probably because I used the KI3 version on KI4. I guess that means you need the right one!
Cosmic Blue said:
use the updated thread which has the apk for Ki8 for the mod. scroll down to the bottom f the first post to find it.
http://forum.xda-developers.com/showthread.php?t=1197150
Click to expand...
Click to collapse
I downloaded the "XWKI8 framework-res.apk for circle battery mod and CRT effect (/system/framework/)". Tried apk-installing with CWM, but it says "Application not installed". Also tried moving the .apk-file to /system/framework/ (don't know if has any effect) but Root Explorer says that it is write-only directory. I am now again out of ideas, what next?
e: Okay, i found some tips on Google. (http://www.brighthub.com/mobile/google-android/articles/37151.aspx) See the "Using the Android SDK", is that correct way to go? I am not at home at the moment, but I will give it a shot later.
e2: Yay, got it working Had to click the "Mount R/W" click on the top on Root Explorer. I pasted the .apk-file on /system/framework/, and now it's working I think I now learnt how to use these files, thanks all!
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
pjssilva said:
I am trying to go back to stock ROM and use the Bares' Init.d Scripts Using Stock Kernel (V3).
I reflashed the stock GB ROM using flashtool, rooted and installed xrecovery 0.3. After that, I installed Bares' INIT-D-RUNNER-TWEAKS-V3.zip using xrecovery and rebooted. When ever I try to use wifi I get "Error" just below the toggle to turn it on and i does not work.
It seems like someone else had this problem, but Bares says tha wifi errors shouldn't happen, see:
http://forum.xda-developers.com/showthread.php?t=2174564&highlight=wifi
I tried reinstalling three times (install original ROM and after that apply the Init.d scripts) in an unlocked bootloader X10. I then relocked the boot loader and tried again and I still get wifi problems.
Anyone else having problems like this? Is there a work around?
Obs: I could not post in the original threas as I am a newbie here and I am not allowed to post in the development section.
Click to expand...
Click to collapse
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
It didn't work out
Bares said:
Hi bro, we need to edit install-recovery.sh script inside zip to include wifi module, please refer to HERE.
So, please use this zip, just flash it through Xrecovery, then it should be fine.
FYI
Regards
Click to expand...
Click to collapse
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
pjssilva said:
First, thanks Bares for ansewring fast. But I am sorry to say that I did not succeed. First, I tried to simply add the line
insmod /system/lib/modules/wifi.ko
in the middle of install-recovery.sh and it didn't work out. I thought the reason was that I did not add the wiki.ko file to /system/lib/modules in the generated zip and started to look for it. I found the following the stock wifi modules from here. I got the modules from the x10_gb_stock_wifi_modules.zip file and added them to my tweaked INIT.D zip but it didn't work out. Anything that I am missing?
Click to expand...
Click to collapse
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
It still does not work
Bares said:
Hmmm..., this problem could be happened if the rom wasn't settled properly too.
So, please try these steps (exactly) :
- Revert back to stock and setup the phone.
- Root it with the latest Flashtool and choose SuperSU !!!
- Install Xrecovery and let the rom settled first !!!
- Check an everything including wifi !!!.
- If its all working good then flash my script (see the thread for the latest one) through xrecovery and dont get rush on the first 2~3 reboot.
- And check the result.
Regards
Click to expand...
Click to collapse
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
pjssilva said:
I tried as you suggested and it didn't work. I tried both with your V4 scripts and with my modified version to include the "insmod /system/lib/modules/wiki.ko". Both did not work after some time to settle the original ROM (with 3 reboots) and some time to settle the modified ROM (3 more reboots).
I have also tried your new STOCK-GB-MOD-RELOAD.zip update file, but it didn't work either.
One thing I noticed is that your original update files delete the wifi.ko module from the /system/lib/modules directory that exists in the stock ROM. I even copied wifi.ko to my computer and cried an small zip that can be flashed by xrecovery to restore that file, but it is not enough to get it working. I tried to read your INIT-D-RUNNER-TWEAKS-V4 to see what it was doing but I did not understand how it changes wifi (I could not even find out where wiki.ko wasw being deleted).
It is a really shame, as your new STOCK-GB-MOD-RELOAD.zip looks exactly as what I wanted.
Anything else I should try?
Click to expand...
Click to collapse
Hi bro,
The last options is by remove these 2 lines below from instal-recovery.sh script inside zip provided (STOCK-GB-MOD-RELOAD.zip) :
HTML:
#init.d runner
busybox run-parts /system/etc/init.d/
BUT, ... the problem is : you will lost init.d runner for Stock Kernel, and it cause all tweaks will not run for sure.
The result is the rom will feel a bit slower than it should be.
Note : To be honest, i'm little bit confusing here, because everything should be fine.
OR : Use custom kernel for Locked Bootloader ( Doomkernel V6 for Locked Bootloader).
OR :
Just simply unlock the bootloader (it's really safe, but you have to follow the proper procedure on this), the simply procedure is :
- Revert back to Stock Rom using PC Companion or SEUS or Flashtool (Download the latest Flashtool Version (see the thread about how to unlock for more detail info, read it carefully!!!)., and then unlock your bootloader using this Flashtool.
Note :
Don't assume if got doubt about this.
- Flash custom kernel using above Flashtool (DoomKernel V6 integrated Bootmanager V2 Auto Rooted by Championswimmer is my recommendation) , because it's using Original Sony's boot splash logo.
- Flash above zip (STOCK-GB-MOD-RELOAD.zip) through Xrecovery.
- Finally you have to flash wifi modul for above kernel (find it on DoomLord's Thread).
Hope this help
Regards
Intalling another kernel does not work...
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Improvement
pjssilva said:
Hi,
I had a version with a prestine Stock + STOCK-GB-MOD-RELOAD.zip[/B] through Xrecovery. And I installed championswimmer kernel on top of it (thinking it would restore wi-fi) and it didn't work. That is realluy strange. I am starting to fear that the problem is with my X10 (it has some odd behaviors, like it always become slow when using a Ferakernel).
I'll try your first suggestion (turn off init.d scripts) and let you know how it went here.
Anyhow, great thanks!
Click to expand...
Click to collapse
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
I found a solution
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
pjssilva said:
I found the problem an the solution.
Just after installing the stock rom, rooting, and installing xrecovery, there is a single file in /system/etc/init.d. It is called 00modules (see attachment). It looks like it create symlinks from the currect kernel modules to /system/lib/modules. This file is essential to get wifi working in my X10.
Since Bare's mods, like STOCK-GB-MOD-RELOAD.zip, delete all the files in there I end up without wifi after installing them.
The solution is simple. Just add this file to STOCK-GB-MOD-RELOAD.zip in "system/etc/init.d". It will them be copied back after being erased. Wifi works and I get Bare's mod fully functional.
Thanks Bares fo your mod!
Click to expand...
Click to collapse
Oooops, OMG i really really... forgot to include it, i though i was .
Really sorry, will update my script immediately, thanks you so much bro :good:.
Best Regards
[email protected]
---------- Post added at 07:49 AM ---------- Previous post was at 07:38 AM ----------
pjssilva said:
I tried to turn off init.d scripts and it didn't work!
It was getting into my nerves. So I decided to look inside your INIT-D-RUNNER-TWEAKS-V4.zip file to see if something was weird to me. I am an old Linux desktop user and it looked very strange a line in the update-script script inside META-INF/com/google/android:
delete_recursive SYSTEM:etc/init.d
This woudl delete the whole /etc/init.d directory, somthing that looks very dangerous from a desktop user. So I just commented it and created a new zip file (allowing the copy of your custom init.d scripts, just avoid the full deletion before hand). I was sure it would not work, but it did... Wifi is working after I install this new zip.
I plan now to take a close look at exactly what files are being deleted to find out what should remain in order to keep wifi working in my phone. I'll let you know when I get it right. Now I have to leave as real life is calling me!
Click to expand...
Click to collapse
I create this line below :
delete_recursive SYSTEM:etc/init.d
Just to make sure no additional tweaks on init.d (and this is for users that don't want to fresh install the rom) , so the rom will 100% run with my files, just is't.
BTW, thanks a lot for the finding bro :good:. I have update my script to the FINAL one (see my thread), and it seem will be no more update after this one.
FYI
Best Regards
I am running 10.1 RC3 and saw the update for the final release build...it uses CM updater, then the file is nowhere to be found...do I have to install RC5 before upadting the final build? Any help would be appreciated...
The first click downloads it within CM Updater. I think it normally prompts you asking if you want to install, but if you missed that try just clicking it again..?
You probably have to use your recovery program to flash it yourself. The file will download somewhere on your device so use your file manager to move it to a place where your recovery program can read.
datallboy said:
You probably have to use your recovery program to flash it yourself. The file will download somewhere on your device so use your file manager to move it to a place where your recovery program can read.
Click to expand...
Click to collapse
I ended up waiting until 10.1.1 and everything worked great, thanks for the help!