Xperia P Bricked - Sony Xperia P, U, Sola, Go

Please, don't flash "Xperia P Autoroot Kernel With Recovery for ICS" you'll brick your device and usb will go down.

sanjid151 said:
Please, don't flash "Xperia P Autoroot Kernel With Recovery for ICS" you'll brick your device and usb will go down.
Click to expand...
Click to collapse
That's very strange, I flashed this kernel about a week ago and it didn't brick my device and USB didn't go down...
---------- Post added at 02:08 AM ---------- Previous post was at 02:06 AM ----------
Maybe you forgot how to flash this? Did you used fastboot.exe? It worked just very well for me!

I flashed that kernel like 5-6 times and haven't encountered any problem

I've used this kernel for the past 3 weeks and haven't encountered any problems yet.

Where is the problem?
Sent from my LT22i using xda app-developers app

I've installed the kernel when i was on gingerbread then i flashed from cwm this rom, wen i've powered on my Xperia it shows me the blue light to go in recovery, if i skip it then xperia switch off then automatically on. It goes only in recovery (when i press volume buttons during blue light) but if i wanted to go in fastboot it didn't connect to the pc

that is not a rom it was only an add-on for that ICS firmware for Xperia P. Just download the ICS from the Xperia P forums and flash it with flash tool (shut down by pressing volume up and power button for 20 sec.) than flash the rom and apply the add on.

sanjid151 said:
I've installed the kernel when i was on gingerbread then i flashed from cwm this rom, wen i've powered on my Xperia it shows me the blue light to go in recovery, if i skip it then xperia switch off then automatically on. It goes only in recovery (when i press volume buttons during blue light) but if i wanted to go in fastboot it didn't connect to the pc
Click to expand...
Click to collapse
You can't enter flashmode?

josie87 said:
You can't enter flashmode?
Click to expand...
Click to collapse
Yeah had this too. Need to flash original kernel back. Than you can flash again

Related

[Q] Have I bricked my Sola?

Hi everyone, I need help because I have probably bricked my Xperia Sola. Yesterday I tried to flash ClockWorkMod recovery ( http://forum.xda-developers.com/showthread.php?t=1766892 ). I flashed kernel.elf via fastboot and after flashing I unplugged the phone and I pressed the power button, the phone vibrated and the Sony logo appeared then the phone vibrated again and the blue led turned on and.. nothing else! It doesn't boot and i don't know what to do I noticed that if i press volume up while the blue led is on, the phone goes into recovery mode but I don't know what to do! Can someone help me?
p.s. Sorry for my bad english!
Sent from my U8185 using xda app-developers app
Well, if you clicked the volume up while he was with that blue LED, and opened his recovery, he may still go start the kernel... remove and replace the battery and turn on the phone, maybe it solves.
CaioA2 said:
Well, if you clicked the volume up while he was with that blue LED, and opened his recovery, he may still go start the kernel... remove and replace the battery and turn on the phone, maybe it solves.
Click to expand...
Click to collapse
I can't remove it! The phone has a non-removable battery!
OK, do the following, click the power button and hold it more or less by 10secs and release when you feel three vibrations . It will reboot your phone .
I followed your instruction but the phone didn't vibrate 3 times.. I'm desperate, do you think that if I bring my phone in a Sony support center they will fix it?
He turn on a Red led when you pressing the power + up vol? have to be pressed in the same time.. you can fix it easily here. you dont need to go to a sony support center now. If reset dont work , you can use flashtool to make it stock again.
---------- Post added at 05:00 PM ---------- Previous post was at 04:55 PM ----------
If you want , flash this rom , its have root and CMW -> http://forum.xda-developers.com/showthread.php?t=1897908 you can use adb to flash , or with flashtool , what is much more easy to use.
alezmoroni said:
I followed your instruction but the phone didn't vibrate 3 times.. I'm desperate, do you think that if I bring my phone in a Sony support center they will fix it?
Click to expand...
Click to collapse
Out of curiosity, were you on GingerBread or ICS when you flashed this ? And is your bootloader unlocked ?
Flash a Stock as mentioned before and you should be fine.You can go Either Stock ICS http://forum.xda-developers.com/showthread.php?t=1914264
or GB (as in the previous post).
And the Force reboot is Hold Vol Up + Power for around 15 sec. You will initially have one vibration, then three. After which it turns off.
What were you on? ICS or GB?
It's just an incorrect kernel flash. Phone can still be fixed.
I've first hand experience with this >_>
Don't send to Sony. They're useless.
Hold power + vol up for 10 secs. The phone will vibrate once, keep the buttons pressed until the vibration is felt 3 times.
Let go of Power, keep the vol up pressed. Then quickly shove the USB port in.
Flash these kernels via fastboot, depending on which version you were on.
GB: http://forum.xda-developers.com/showthread.php?t=1897908
ICS: http://forum.xda-developers.com/showthread.php?t=1922029
EDIT:
Or you can save all the trouble with the following:
Download Flashboot. After the 3 vibes, quickly hold vol down and shove the USB port in. Flash the stock ICS rom (includes kernel) which will fix your problems as well.
http://forum.xda-developers.com/showthread.php?t=1914264
There's a global version in the thread somewhere.
Snowstormzzz said:
EDIT:
Or you can save all the trouble with the following:
Download Flashboot. After the 3 vibes, quickly hold vol down and shove the USB port in. Flash the stock ICS rom (includes kernel) which will fix your problems as well.
http://forum.xda-developers.com/showthread.php?t=1914264
There's a global version in the thread somewhere.
Click to expand...
Click to collapse
Oh my god! Thank you so much! My phone works again!!! I flashed the ics .ftf file and now my phone is working!!

[Q] [Sola] No data connection

Yesterday I installed this rom, version 146, it's amazing, very fast and got no Wifi bug (button disabled), everything working fine.
Spent all the day outside home, data connection worked perfect. Went home on the night, got the wifi, no problem.
So, tomorrow when I was going to work, I picked up the phone and there was no data connection, strange. So I restarted the phone, still no data. Tried to find the phone operator, I restarted again, nothing.
I restarted to recovery, fixed permissions, still no data.
No data at all, so I thought about doing some backup on the recovery and install another rom to check it, tried to backup, but there was no space on the phone, and the recovery does not let me choose the ext_card to backup.
So I started choosing some options and then the recovery crashed, it's stuck, with the text "no files found", it's stuck there. I'm unable to boot, to do anything.
I don't know how to remove the battery, so I'm really stuck.
Three things:
1) No data connection, is this a bug?
2) How do I remove the battery to restart?
3) Can I install another recovery? Like the munjeni one?
Please help
Press power + vol up to boot again. Then go to recovery. Turn off phone,
Install a fresh stock rom.
Sent from my MT27i using xda app-developers app
tsukot said:
Press power + vol up to boot again. Then go to recovery. Turn off phone,
Install a fresh stock rom.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Worked. Thanks
---------- Post added at 09:12 AM ---------- Previous post was at 08:36 AM ----------
tsukot said:
Press power + vol up to boot again. Then go to recovery. Turn off phone,
Install a fresh stock rom.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Btw, Why should I install the fresh stock rom?
---------- Post added at 09:30 AM ---------- Previous post was at 09:12 AM ----------
Oh noes. I was able to enter the recovery using the power + volume up combination. So, I restored my last backup. The phone turned off. And does not turn on again.
I already tried the power + volume up combination. The phone simple respond with the first vibration, then the next three.... but does not restart, there's nothing on the screen. It's stuck again.
Help
saulob said:
Worked. Thanks
---------- Post added at 09:12 AM ---------- Previous post was at 08:36 AM ----------
Btw, Why should I install the fresh stock rom?
---------- Post added at 09:30 AM ---------- Previous post was at 09:12 AM ----------
Oh noes. I was able to enter the recovery using the power + volume up combination. So, I restored my last backup. The phone turned off. And does not turn on again.
I already tried the power + volume up combination. The phone simple respond with the first vibration, then the next three.... but does not restart, there's nothing on the screen. It's stuck again.
Help
Click to expand...
Click to collapse
Flash a new stock ROM via Flashtool if you believe you need to. Use this link for stock Indian rom:
http://forum.xda-developers.com/showthread.php?t=1914264
The easiest way (for me personally) to flash new rom is to use Flashtool, get it from here:
http://androxyde.github.com/index.html?1352727798000.
This is the Flashtool thread here in XDA for a gude: http://forum.xda-developers.com/showthread.php?t=920746
Or maybe there is an easier way
mkoev said:
Flash a new stock ROM via Flashtool if you believe you need to. Use this link for stock Indian rom:
http://forum.xda-developers.com/showthread.php?t=1914264
The easiest way (for me personally) to flash new rom is to use Flashtool, get it from here:
http://androxyde.github.com/index.html?1352727798000.
This is the Flashtool thread here in XDA for a gude: http://forum.xda-developers.com/showthread.php?t=920746
Or maybe there is an easier way
Click to expand...
Click to collapse
Thank, but the thing is... there's no connection the PC. Flashtool does not recognize the phone.
If I plug the usb cable the red light turn on, but the phone does not.
The only thing it does it's vibrate one time when I click the power button and four times when I press power + volume up.
Flashtool says: 12/049/2012 10:49:11 - INFO - Device disconnected
saulob said:
Thank, but the thing is... there's no connection the PC. Flashtool does not recognize the phone.
If I plug the usb cable the red light turn on, but the phone does not.
The only thing it does it's vibrate one time when I click the power button and four times when I press power + volume up.
Flashtool says: 12/049/2012 10:49:11 - INFO - Device disconnected
Click to expand...
Click to collapse
Did you connected the phone like this: vol down + plug in USB cable? I mean flashtool mode?
And Dude, it become a huge off topic here, please open a thread in Q&A buddy, there you will get your help.
mirost1 said:
Did you connected the phone like this: vol down + plug in USB cable? I mean flashtool mode?
And Dude, it become a huge off topic here, please open a thread in Q&A buddy, there you will get your help.
Click to expand...
Click to collapse
Thanks, I did that and it's fixed. I was able to install the FreeXperia rom again
The only problem that I found now it's that after installing the rom I went to install the munjeni kernel. Tried using it, but did not work
On boot there's one message saying that the android process stopped and the NFC too.... strange.
The message does not go away
I think I will need to flash the FreeXperia rom and stays with the default recovery
saulob said:
Thanks, I did that and it's fixed. I was able to install the FreeXperia rom again
The only problem that I found now it's that after installing the rom I went to install the munjeni kernel. Tried using it, but did not work
On boot there's one message saying that the android process stopped and the NFC too.... strange.
The message does not go away
I think I will need to flash the FreeXperia rom and stays with the default recovery
Click to expand...
Click to collapse
Then dont flash munjeni's kernel mate, flash boot.img from FXP and stay with that CWM. That way you wont get messages and will have working rom mate.
mirost1 said:
Then dont flash munjeni's kernel mate, flash boot.img from FXP and stay with that CWM. That way you wont get messages and will have working rom mate.
Click to expand...
Click to collapse
Yeah, I will do that, stay with the FXP kernel. The problem it's that the munjeni kernel has more options, like open the ext_card and save backups there..
FOTA
Does it support ota for example from FXP 145 to FXP 146?
Newest munjeni kernel it's incompatible with most of the custom rom and cause issues.
Sent from my MT27i using xda app-developers app
I guess no ota updates till yet
Sent from my ST25i using Tapatalk 2

[Q] help! my phone wont turn on T_T

after i done unlocking bootloader, i reboot my phone using command prompt, then i follow the instruction that waiting the violet light n press the +volume, n till now, my phone cannot turn on, juz with black background without sony logo, what should i do? can i format or reset my phone so it can be on as normal?
You flashed a kernel after unlocking, right?
Did you unlock using the tool or sony's official?
Search for a kernel for your software version (if you were on ics an ics kernel, gingerbread gb kernel) and you have the boot.img. Now take the battery of the phone, wait a few seconds, insert it again, hold volume up, connect the usb while holding volume up, the blue led will light
Now open flashtool - click the flash - fastboot mode - select the downloaded boot.img - wait until flashing ends - unplug phone and start it :good:
Sent from my SK17i running Android 4.2.1
hyze said:
after i done unlocking bootloader, i reboot my phone using command prompt, then i follow the instruction that waiting the violet light n press the +volume, n till now, my phone cannot turn on, juz with black background without sony logo, what should i do? can i format or reset my phone so it can be on as normal?
Click to expand...
Click to collapse
Did you use GB firmware and flash ICS or JB kernel???To use ICS or JB kernels,update phone to .587 or .431 firmware,then flash kernel.
Sent from my ST15i using xda premium
help! my phone wont turn on T_T
mihahn said:
You flashed a kernel after unlocking, right?
Did you unlock using the tool or sony's official?
Search for a kernel for your software version (if you were on ics an ics kernel, gingerbread gb kernel) and you have the boot.img. Now take the battery of the phone, wait a few seconds, insert it again, hold volume up, connect the usb while holding volume up, the blue led will light
Now open flashtool - click the flash - fastboot mode - select the downloaded boot.img - wait until flashing ends - unplug phone and start it :good:
Sent from my SK17i running Android 4.2.1
Click to expand...
Click to collapse
thanks mihahn, but it still wont work,ok firstly i rooted my phone (GB) firmware .58 n then i upgraded to ICS, also i have installed cwm on my phone, then i wan to install cm10, so follow this step, i open my cmd:
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+ (i still stuck at here, waitng the light to turn on, but only background light n no sony logo)
- flash rom zip
- flash gapps zip
- wipe
- reboot
i dont know what to do as it my first time, n im so messed up ><
Dear friend
You need not have to worry just download cm9 stable version. Extract its kernel on your desktop which is boot.img and copy cm9 zip in SD card
Now connect your phone: in PC in fastboot mode and flash cm9 kernel you will find your mobile will boot up with FXP then instal cm9 with cwm
Regards
Ashwani
Sent from my LiveWithWalkman using xda app-developers app
Can your phone still boot in Fastboot mode? Then you're lucky otherwise he's broken!
hyze said:
thanks mihahn, but it still wont work,ok firstly i rooted my phone (GB) firmware .58 n then i upgraded to ICS, also i have installed cwm on my phone, then i wan to install cm10, so follow this step, i open my cmd:
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+ (i still stuck at here, waitng the light to turn on, but only background light n no sony logo)
- flash rom zip
- flash gapps zip
- wipe
- reboot
i dont know what to do as it my first time, n im so messed up ><
Click to expand...
Click to collapse
On my device to enter recovery I hit vol - not vol +
Whats your phone? LWW?
Its an issue in the latest (fxp 201 & 202) cm10 kernel for LWW.
Just try another JB kernel like Lupus JB or Mesa JB
Sent from my Xperia Live with Walkman using xda app-developers app
i already recover my phone back n now using cm9, thank to ajay =D
btw, thanks to all who posting n help me, i appreciate it =D
<SOLVED>
It's ok dear it was glad for me to know that your problem was solved
Sent from my Xperia Live with Walkman using xda app-developers app
Try flashing a kernel. But not fxp 201 or up kernel because they're buggy
Sent from my WT19i using xda premium

[Q] how to update my se lww ?

i have sony lww wt19i android version 2.3.4 build no. 4.0.2.a.0.58
i rooted it SuperUser app came and i also installed CWM version 5 and also downloaded Titanium Backup and ROM Manager
but my phone show that i have update available to 4.0.2.A.0.62 when i try to update it fails even it fails while updating through Sony PC Campanion
So plz tell me how to update it and how can i update it to ICS.?
Plz also tell me can i install custom roms on 2.3.4 ?
my boot loader is unlocked through Sony Key.
thx to all in advance plz help...
Download flashtool and flash the appropriate ics Rom for Ur device.. And use Google
Sent from my SK17i using xda app-developers app
jiturawat said:
i have sony lww wt19i android version 2.3.4 build no. 4.0.2.a.0.58
i rooted it SuperUser app came and i also installed CWM version 5 and also downloaded Titanium Backup and ROM Manager
but my phone show that i have update available to 4.0.2.A.0.62 when i try to update it fails even it fails while updating through Sony PC Campanion
So plz tell me how to update it and how can i update it to ICS.?
Plz also tell me can i install custom roms on 2.3.4 ?
my boot loader is unlocked through Sony Key.
thx to all in advance plz help...
Click to expand...
Click to collapse
Ok so if u have unlocked bootloader u can simply download a suitable ics kernel and then flash it using fastboot...then download ics rom and flash it....but be sure that the ics rom u download is compatible with the kernel....
Press THANKS if I helped,
Regards,
AJ
jiturawat said:
i have sony lww wt19i android version 2.3.4 build no. 4.0.2.a.0.58
i rooted it SuperUser app came and i also installed CWM version 5 and also downloaded Titanium Backup and ROM Manager
but my phone show that i have update available to 4.0.2.A.0.62 when i try to update it fails even it fails while updating through Sony PC Campanion
So plz tell me how to update it and how can i update it to ICS.?
Plz also tell me can i install custom roms on 2.3.4 ?
my boot loader is unlocked through Sony Key.
thx to all in advance plz help...
Click to expand...
Click to collapse
Check out the sticky thread in the development section for a complete list of custom gb,ics,jb roms.
And as alokbina said flash a respective kernel before u flash a rom.
Can u suggest best & stable ics rom & kernel for my se lww
alokbina said:
Ok so if u have unlocked bootloader u can simply download a suitable ics kernel and then flash it using fastboot...then download ics rom and flash it....but be sure that the ics rom u download is compatible with the kernel....
Press THANKS if I helped,
Regards,
AJ
Click to expand...
Click to collapse
Thanks to all frnds!!
Can u suggest best & stable ics rom & kernel for my se lww
thx
jiturawat said:
Thanks to all frnds!!
Can u suggest best & stable ics rom & kernel for my se lww
thx
Click to expand...
Click to collapse
Sorry, but we are not allowed to ask for the best rom/kernel
got error while flashing a kernel
mihahn said:
Sorry, but we are not allowed to ask for the best rom/kernel
Click to expand...
Click to collapse
its ok bro..
i decided to install serenity v3 custom rom in my rooted sony lww and also to flash a serene 'coconut' kernel
i found it in this website xda i flashed that kernel but i got a error on flashtool while flashing its says 'failed'
after that when i restart my lww it doesn't restart. when i pressing the phone on/off button its just vibrate likes its switching on
but not starting its just have a blank black screen.
and during trying all these things my phone battery got empty and my phone also not charging through usb cable or through
charging plug. now i trying to start my phone when i pressing the on/off button red LED light is blinking which means battery completely
empty.....
What i do now..?? i stuck on empty battery and a phone which is not starting.
plz help me...
this is the link from where i downloaded custom rom and kernel........--> http://forum.xda-developers.com/showthread.php?t=1936672
thx in advance....
Fastboot..........
jiturawat said:
its ok bro..
i decided to install serenity v3 custom rom in my rooted sony lww and also to flash a serene 'coconut' kernel
i found it in this website xda i flashed that kernel but i got a error on flashtool while flashing its says 'failed'
after that when i restart my lww it doesn't restart. when i pressing the phone on/off button its just vibrate likes its switching on
but not starting its just have a blank black screen.
and during trying all these things my phone battery got empty and my phone also not charging through usb cable or through
charging plug. now i trying to start my phone when i pressing the on/off button red LED light is blinking which means battery completely
empty.....
What i do now..?? i stuck on empty battery and a phone which is not starting.
plz help me...
this is the link from where i downloaded custom rom and kernel........--> http://forum.xda-developers.com/showthread.php?t=1936672
thx in advance....
Click to expand...
Click to collapse
try another custom kernel but first try to charge your battery by some other ways ........... like charging battery by direct plug charger which available in market....
jesudas said:
try another custom kernel but first try to charge your battery by some other ways ........... like charging battery by direct plug charger which available in market....
Click to expand...
Click to collapse
i flashed the custom kernel through fastboot mode.
i connected the phone on fastboot mode to pc after that open flashtool selected fastboot mode after that
select the kernel i.e. boot image than flashtool works some lines after it shows 'failed'
jiturawat said:
i flashed the custom kernel through fastboot mode.
i connected the phone on fastboot mode to pc after that open flashtool selected fastboot mode after that
select the kernel i.e. boot image than flashtool works some lines after it shows 'failed'
Click to expand...
Click to collapse
Can u post the complete log?
Press THANKS if I helped,
Best Regards,
AJ
jiturawat said:
its ok bro..
i decided to install serenity v3 custom rom in my rooted sony lww and also to flash a serene 'coconut' kernel
i found it in this website xda i flashed that kernel but i got a error on flashtool while flashing its says 'failed'
after that when i restart my lww it doesn't restart. when i pressing the phone on/off button its just vibrate likes its switching on
but not starting its just have a blank black screen.
and during trying all these things my phone battery got empty and my phone also not charging through usb cable or through
charging plug. now i trying to start my phone when i pressing the on/off button red LED light is blinking which means battery completely
empty.....
What i do now..?? i stuck on empty battery and a phone which is not starting.
plz help me...
this is the link from where i downloaded custom rom and kernel........--> http://forum.xda-developers.com/showthread.php?t=1936672
thx in advance....
Click to expand...
Click to collapse
This means that you deleted the whole system because it happened to me before. Download the stock ROM of your mobile and follow these steps:
1. Open Flashtool and press on FLASH (the one with the lightning).
2. Choose Flashmode.
3. Select the ROM and press on ok. If you get ERROR, try to clean up some memory on your disk.
4. keep holding the -volume button.
5. Plug your mobile on to the computer quickly before it boots up.
6. After flashing is DONE, Unplug your mobile from the computer and turn it on. It may take 2 minutes or more to boot up, so don't worry.
7. Your mobile now is stock as new, so it is not rooted and the bootloader is also locked i think.
If I helped you, don't forget to hit THANKS button :laugh:
Hussein El Feky said:
5. Plug your mobile on to the computer quickly before it boots up.
If I helped you, don't forget to hit THANKS button :laugh:
Click to expand...
Click to collapse
It won't boot up. Just hold volume down and plug it in. Don't hold power, just volume - and plug the usb in
Use sony update service instead of pc campainion for updating
Sent from my WT19i using xda app-developers app
alokbina said:
Can u post the complete log?
Press THANKS if I helped,
Best Regards,
AJ
Click to expand...
Click to collapse
its ok bro..
i decided to install serenity v3 custom rom in my rooted sony lww and also to flash a serene 'coconut' kernel
i found it in this website xda i flashed that kernel but i got a error on flashtool while flashing its says 'failed'
after that when i restart my lww it doesn't restart. when i pressing the phone on/off button its just vibrate likes its switching on
but not starting its just have a blank black screen.
and during trying all these things my phone battery got empty and my phone also not charging through usb cable or through
charging plug. now i trying to start my phone when i pressing the on/off button red LED light is blinking which means battery completely
empty.....
i flashed the custom kernel through fastboot mode.
i connected the phone on fastboot mode to pc after that open flashtool selected fastboot mode after that
select the kernel i.e. boot image than flashtool works some lines after it shows 'failed'
What i do now..?? i stuck on empty battery and a phone which is not starting.
plz help me...
this is the link from where i downloaded custom rom and kernel........--> http://forum.xda-developers.com/show....php?t=1936672
thx in advance....
Firstly try charging your battery using some other phone or some chargers where u can just insert battery(doesn't cost much) and then keep the battery for 15 sec(without connecting to charger or mobile)...now let's start from beginning....re-insert your battery and connect ur phone in flashmode and flash stock firmware...after that turn USB debugging, msc mode and unknown sources(just to be on safe side) then reflash the kernel using fastboot, hold vol up and connect to pc(obviously u might be on unlocked bl to do all this...) and then flash the ROM(u might have placed in ur sdcard) with correct wipes and boot it....
Just an advice: after u install the Rom go to launcher, then clear data and force stop, then remove the battery for 30 sec and then reboot it twice....
Press THANKS if I helped,
Best Regards,
AJ
alokbina said:
Firstly try charging your battery using some other phone or some chargers where u can just insert battery(doesn't cost much) and then keep the battery for 15 sec(without connecting to charger or mobile)...now let's start from beginning....re-insert your battery and connect ur phone in flashmode and flash stock firmware...after that turn USB debugging, msc mode and unknown sources(just to be on safe side) then reflash the kernel using fastboot, hold vol up and connect to pc(obviously u might be on unlocked bl to do all this...) and then flash the ROM(u might have placed in ur sdcard) with correct wipes and boot it....
Just an advice: after u install the Rom go to launcher, then clear data and force stop, then remove the battery for 30 sec and then reboot it twice....
Press THANKS if I helped,
Best Regards,
AJ
Click to expand...
Click to collapse
thx buddy
i flashed .62 firmware to my lww after charging its battery now my phone is new.
now i have to root it again so i have to downgrade it to .58 firmware.
can u tell after rooting it on .58 firmware can i install a ICS custom rom and kernel to my Sony lww
if yes can u tell me some good stable and high performance ICS custom roms and compatible kernels for them.
plz..
thx
Sorry I can't tell u about best rom/kernel but if u have unlocked bootloader u don't need to root it again.....Simply download any pre rooted ics kernel and then flash ti and flash any custom rom based on that kernel...
alokbina said:
Can u post the complete log?
Press THANKS if I helped,
Best Regards,
AJ
Click to expand...
Click to collapse
+1
How did u install cwm...for lww
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
umar thameem said:
How did u install cwm...for lww
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
Root your device and then download X-Parts from playstore and follow the instructions.

[Q] Xperia U Not Booting..

Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
Force shutdown (Power + VolUP for 10 seconds until vibrating for 3 times) then use fastboot or flashtool to flash its kernel or all.
zhy0919 said:
Force shutdown (Power + VolUP for 10 seconds until vibrating for 3 times) then use fastboot or flashtool to flash its kernel or all.
Click to expand...
Click to collapse
It doesn't boot or vibrate 3 times............ It just vibrates once......and not showing any logo too.............
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
Only flashtool can help you now..
Sent from my ST25i using xda app-developers app
Can anyone please explain how to use flashtool step by step............Too pissed off all this.............
I am afraid the phone on pressing vol up and power shows blue led for some time and then turns off.......nothing on screen..............how I can boot in fastboot or flashtool method..............help...........
swarajsaaj said:
Can anyone please explain how to use flashtool step by step............Too pissed off all this.............
I am afraid the phone on pressing vol up and power shows blue led for some time and then turns off.......nothing on screen..............how I can boot in fastboot or flashtool method..............help...........
Click to expand...
Click to collapse
Blue light means fastboot and green represent flashmode....
Sent from my ST25i using xda app-developers app
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
Please take the time and explain exactly what have you donw before it happen.
What dirmware you had before, what firmware you were trying to flash, and how.
swarajsaaj said:
Hello.... I was trying to flash JB ROM in Xperia U...... and when I installed the kernel...........rebooted....It didn't boot.....It vibrates once.....but shows nothing........Not even with volume up buttons.................Please help out...........
Click to expand...
Click to collapse
dude...y don't u read the instruction carefully.. huh.?
U HAVE FLASHED THE KERNEL ON LOCKED BOOTLOADER.....but it requires unlocked bootloader only....so u have to use flashtool to recover ur device...!
but..don't worry...its just a soft brick..!
regards
kantry123
kantry123 said:
dude...y don't u read the instruction carefully.. huh.?
U HAVE FLASHED THE KERNEL ON LOCKED BOOTLOADER.....but it requires unlocked bootloader only....so u have to use flashtool to recover ur device...!
but..don't worry...its just a soft brick..!
regards
kantry123
Click to expand...
Click to collapse
wasn't aware of bootloader stuff dude.....................................can I knw how can I recover using flash tool.....what kernel and rom again,,,,,??
ChikeD said:
Please take the time and explain exactly what have you donw before it happen.
What dirmware you had before, what firmware you were trying to flash, and how.
Click to expand...
Click to collapse
I had stock ICS first....I installed a memory_tweak which replaced the kernel and that caused the problem ...another cause maybe the phone stuck on AROMA Installer of new JB Rom.....so I had to remove battery in middle of that installer...............That's all I did
If your bootloader is locked just flash any ftf for your device with flashtool
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Ben36 said:
If your bootloader is locked just flash any ftf for your device with flashtool
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Click to expand...
Click to collapse
and how to do that.......u mean this way http://forum.xda-developers.com/showthread.php?t=1849170
This should help -
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:39 PM ----------
zhy0919 said:
Force shutdown (Power + VolUP for 10 seconds until vibrating for 3 times) then use fastboot or flashtool to flash its kernel or all.
Click to expand...
Click to collapse
swarajsaaj said:
It doesn't boot or vibrate 3 times............ It just vibrates once......and not showing any logo too.............
Click to expand...
Click to collapse
Keep holding. Eventually it'll vibrate 3 times and be properly shut off, ready for flashing
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Ben36 said:
This should help -
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:39 PM ----------
Keep holding. Eventually it'll vibrate 3 times and be properly shut off, ready for flashing
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Click to expand...
Click to collapse
Nothing happens......Kept holding them..........just one vibration and a blue LED flash..............nothing else
swarajsaaj said:
Nothing happens......Kept holding them..........just one vibration and a blue LED flash..............nothing else
Click to expand...
Click to collapse
Hey Guys..............I was trying to flash using Flashtool but now my phone is continuosly in flashmode... green LED whenever I connect it to USB which is not allowing me to flash it............any idea how to handle this...??
swarajsaaj said:
Hey Guys..............I was trying to flash using Flashtool but now my phone is continuosly in flashmode... green LED whenever I connect it to USB which is not allowing me to flash it............any idea how to handle this...??
Click to expand...
Click to collapse
Green led means chared too.
How do you tell it is in flash mode? What is flashtool reporting?
Flash mode IS what you need to flash new firmware.
ChikeD said:
Green led means chared too.
How do you tell it is in flash mode? What is flashtool reporting?
Flash mode IS what you need to flash new firmware.
Click to expand...
Click to collapse
green led means the LED STRIP is green.........and flashtools tells to unplug->switch off->back button->plug usb.......................bt that not working too..............
Please help me to get the phone in a position so I can flash it....like completely switching off...... because on pluggin usb it automatically lights green led...
swarajsaaj said:
green led means the LED STRIP is green.........and flashtools tells to unplug->switch off->back button->plug usb.......................bt that not working too..............
Please help me to get the phone in a position so I can flash it....like completely switching off...... because on pluggin usb it automatically lights green led...
Click to expand...
Click to collapse
Open flashtool, connect the usb while pressing volume down, does flashtool reports device conndcted in flash mode?
If it does, disconnect the phome and click the flash icon, select flashmode, slect FW file to flash (exclude TA if present), wait untill flashtool ask you to connect the phoen, press volume down and connect the phone, wait to untill flash is finished.
ChikeD said:
Open flashtool, connect the usb while pressing volume down, does flashtool reports device conndcted in flash mode?
If it does, disconnect the phome and click the flash icon, select flashmode, slect FW file to flash (exclude TA if present), wait untill flashtool ask you to connect the phoen, press volume down and connect the phone, wait to untill flash is finished.
Click to expand...
Click to collapse
No it doenst....................I have to manually select it from list.....it doesn't detect my phone.............though green strip is lightened on phone....
swarajsaaj said:
No it doenst....................I have to manually select it from list.....it doesn't detect my phone.............though green strip is lightened on phone....
Click to expand...
Click to collapse
Cab you please save log in flashtool after you try to connect in flash mode, and post it's content?

Categories

Resources