so long story short like last week i tryed to unroot my phone like a dummy!! i ran an old ruu... so my phone was stock but i still had s-off... i wanted root again so i just flashed a custom recovery again cause i still had s-off after i ran the ruu... then i just flashed a rom.. now my hboot is 1.12.0000... i ran the bootloader custimizer but hboot is still 1.12.0000 how can i get hboot 1.12.22222 again????
If you're rooted and s-off then you really don't need to worry about it. It won't affect your phone.
metalfan78 said:
If you're rooted and s-off then you really don't need to worry about it. It won't affect your phone.
Click to expand...
Click to collapse
i thought hboot 1.12.2222 is good for using fastboot
There is no difference between 1.12.1111 and 1.12.2222. Check my sig for a link to the RegawMOD Bootloader Customizer. That's what changes the number.
kaeXo said:
There is no difference between 1.12.1111 and 1.12.2222. Check my sig for a link to the RegawMOD Bootloader Customizer. That's what changes the number.
Click to expand...
Click to collapse
1.12.2222 is the updated lazy panda hboot with fastboot. You can get it from their website.
Isnt the new lazy panda hboot 1.13.2222?
LaloHigh said:
Isnt the new lazy panda hboot 1.13.2222?
Click to expand...
Click to collapse
Touche, it is. It's been a while, my bad.
What does the latest hboot do?
kaeXo said:
There is no difference between 1.12.1111 and 1.12.2222. Check my sig for a link to the RegawMOD Bootloader Customizer. That's what changes the number.
Click to expand...
Click to collapse
1.12.1111 has NO fastboot and 1.12.2222 HAS fastboot enabled. if your s-off i would recommend upgrading to 1.12.2222 or you cant use fastboot commands.
bog3nator said:
1.12.1111 has NO fastboot and 1.12.2222 HAS fastboot enabled. if your s-off i would recommend upgrading to 1.12.2222 or you cant use fastboot commands.
Click to expand...
Click to collapse
sweet sp how would i go about updating my hboot to 1.12.22222?? its 1.12.0000 now... it was 1.12,.22222 befor i ran that ruu.. stupid me!!!!!
evo401 said:
sweet sp how would i go about updating my hboot to 1.12.22222?? its 1.12.0000 now... it was 1.12,.22222 befor i ran that ruu.. stupid me!!!!!
Click to expand...
Click to collapse
http://unlimited.io/lazypanda.htm and dl the enhanced hboot top right under downloads
bigdaddy619 said:
http://unlimited.io/lazypanda.htm and dl the enhanced hboot top right under downloads
Click to expand...
Click to collapse
thanks bro!!!!:good:
evo401 said:
thanks bro!!!!:good:
Click to expand...
Click to collapse
No worries bro
evo401 said:
sweet sp how would i go about updating my hboot to 1.12.22222?? its 1.12.0000 now... it was 1.12,.22222 befor i ran that ruu.. stupid me!!!!!
Click to expand...
Click to collapse
if your on stock 1.12 with s-off i dont know if you need to get the updated hboot, the reason they updated was b/c 1.12.1111 broke the fastboot commands...but i am also not sure if stock 1.12 had them to begin with. heh :angel:
Related
Hello m8's,
can anyone, please, tell me where can I find original HBOOT 1.49.0018 to flash...
Tks.
torres.sis said:
Hello m8's,
can anyone, please, tell me where can I find original HBOOT 1.49.0018 to flash...
Tks.
Click to expand...
Click to collapse
for what reason you need that?
i think so for warranty
Flashmaniac said:
for what reason you need that?
Click to expand...
Click to collapse
what the advantages between original hboot with s-off vs juopunutbear hboot with s-off
torres.sis said:
what the advantages between original hboot with s-off vs juopunutbear hboot with s-off
Click to expand...
Click to collapse
you will not be abled to write something over fastboot
Flashmaniac said:
you will not be abled to write something over fastboot
Click to expand...
Click to collapse
That's caused by the fatsboot or by the juopunutbear S-OFF?
The H-BOOT 18 has any bugs fixes compared to 7, or it's only security?
Benik3 said:
That's caused by the fatsboot or by the juopunutbear S-OFF?
The H-BOOT 18 has any bugs fixes compared to 7, or it's only security?
Click to expand...
Click to collapse
when he gets the original hboot he will not have s-off.
there are no fixes or software in, only security things are in it.
I'm S-OFF from the original revolutionary unlock method and have flashed an RUU for 2.89 firmware. I'm trying to get back to HBOOT 1.40 so I can install CM10 ROMs as I've been told they don't work properly on the 1.58 HBOOTs.
I've seen so many threads on here telling you how to go back but they all either refer to being S-ON or for HBOOT 1.50, not 1.58.
I don't want to brick my phone (obviously) so I'm posting here to make sure and to ask which method will work for mine.
I remember somewhere that it would be simple since I'm still S-OFF and all I'd have to do is flash an image with the 1.40 HBOOT but I'm not sure?
thanks
EDIT: I'd delete this post but I can't; I found another thread that addresses this.
Download the 1.4 zip (available on this site), rename it to PG86IMG.zip, and flash it through bootloader.
Imagika FTW... with Tapatalk 2
On the site? Where? lol
This one?
http://d-h.st/O1q
incarceration said:
On the site? Where? lol
Click to expand...
Click to collapse
Here.
ramjet73
Thanks!
Is the ENG Hboot also 1.40?
incarceration said:
Thanks!
Is the ENG Hboot also 1.40?
Click to expand...
Click to collapse
The ENG bootloader is 1.04, but that's a completely different series from the stock and modified bootloaders.
ramjet73
coal686 said:
Download the 1.4 zip (available on this site), rename it to PG86IMG.zip, and flash it through bootloader.
Imagika FTW... with Tapatalk 2
Click to expand...
Click to collapse
im stuck in a boot loop now :crying:
Pedro1760 said:
im stuck in a boot loop now :crying:
Click to expand...
Click to collapse
Here are the hboot files. http://forum.xda-developers.com/showthread.php?p=30014044
Imagika FTW... with Tapatalk 2
flash a gingerbread rom and run the ruu, it will restore ur old hboot.
I have the EVO 3D with the 2.89 RUU installed with HBOOT 1.5858 S-OFF
Is there anyway I can put a JB ROM on my phone?
I've read that JB is not compatible with 1.5858.
Downgrade to the 1.04 ENG Hboot (found in the lens_flare edition miui thread) and you'll be good to go
Sent from my PG86100 using Tapatalk 2
Sounds like you already know the answer.
He was probably looking for clarification
hboot downgrade
Well I've also read that I can downgrade my hboot to 1.4, but that I have to brick it to do that. In other forums people talk like downgrading to 1.4 is simple. When I got the 1.58 upgrade it updated all my radio filestoo.. So I'm wondering if those radioh files are stored on the same partition as hboot. If they are I know how to flash my hboot with fastboot flash command so that would be simple.. Any help, pointers or info would be greatly appreciated.
ZWYATT said:
Sounds like you already know the answer.
Click to expand...
Click to collapse
hboot 1.04
First thanks again.. Do you know if I can just flash this hboot w/o bricking the phone. A lot of people are saying that the phone needs to be bricked to downgrade.
beneath-a-burning-turtle said:
Downgrade to the 1.04 ENG Hboot (found in the lens_flare edition miui thread) and you'll be good to go
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
I see we have someone with common sense here thank you for explaining that!:good:
Jsparta26 said:
He was probably looking for clarification
Click to expand...
Click to collapse
frankk1979 said:
First thanks again.. Do you know if I can just flash this hboot w/o bricking the phone. A lot of people are saying that the phone needs to be bricked to downgrade.
Click to expand...
Click to collapse
Yes, since youre s-off, all you need to do is find a copy of the hboot ( pg86img.zip) and place it on your sdcard, and boot into the bootloader, the phone does everything else from there on its own
Sent from my Evo 3D CDMA using xda app-developers app
class
http://forum.xda-developers.com/showthread.php?t=1817513
You should be able to find all the info you need there.
I am currently s-on unlocked running meanrom 6.5, since i dont want to go thru whole process of doing s-off and installing latest radios can i just flash a jb rom with s-on and the latest radio be included in the rom?
lexcoupe2100 said:
I am currently s-on unlocked running meanrom 6.5, since i dont want to go thru whole process of doing s-off and installing latest radios can i just flash a jb rom with s-on and the latest radio be included in the rom?
Click to expand...
Click to collapse
No. Roms don't include radios or any other firmware. You'd have to relock and RUU to get the radios. And if you want the 3.16 radio you'd have to take the OTA.
tilltheend714 said:
No. Roms don't include radios or any other firmware. You'd have to relock and RUU to get the radios. And if you want the 3.16 radio you'd have to take the OTA.
Click to expand...
Click to collapse
There is a new s-off method in original development
Oooopppsssss quoted the wrong person
Sent from my PoS MoPho
tilltheend714 said:
No. Roms don't include radios or any other firmware. You'd have to relock and RUU to get the radios. And if you want the 3.16 radio you'd have to take the OTA.
Click to expand...
Click to collapse
What you mean and RUU? relock it and check for system updates for the OTA update? Thanks
lexcoupe2100 said:
What you mean and RUU? relock it and check for system updates for the OTA update? Thanks
Click to expand...
Click to collapse
The latest available RUU is for 3.15 running it will update you that far then you would have to take the OTA to get to 3.16
Sent from my PoS MoPho
bigdaddy619 said:
The latest available RUU is for 3.15 running it will update you that far then you would have to take the OTA to get to 3.16
Sent from my PoS MoPho
Click to expand...
Click to collapse
Ok so relock thru apk android and find the RUU 3.15 and flash it through apk also? then ota update? sorry for all questions.
lexcoupe2100 said:
Ok so relock thru apk android and find the RUU 3.15 and flash it through apk also? then ota update? sorry for all questions.
Click to expand...
Click to collapse
You can click the link in my sig and download the 3.15 RUU file there are instructions inside on how to relock
Sent from my PoS MoPho
bigdaddy619 said:
You can click the link in my sig and download the 3.15 RUU file there are instructions inside on how to relock
Sent from my PoS MoPho
Click to expand...
Click to collapse
I have relocked but it wont let me out of boot?? Do i need to flash the RUU now?
please help! how do i install RUU from boot page?
lexcoupe2100 said:
please help! how do i install RUU from boot page?
Click to expand...
Click to collapse
Since you relocked, I'm assuming you know how to use fastboot. Go to here and download the RUU 3.15.651.16 - HBOOT 2.09 from the right. This will give you an RUU.zip. Throw that in your fastboot folder on the pc and follow step 8 and 9. This will run the RUU and put you in 3.15 Stock.
tilltheend714 said:
Since you relocked, I'm assuming you know how to use fastboot. Go to here and download the RUU 3.15.651.16 - HBOOT 2.09 from the right. This will give you an RUU.zip. Throw that in your fastboot folder on the pc and follow step 8 and 9. This will run the RUU and put you in 3.15 Stock.
Click to expand...
Click to collapse
Downlaod the RUU even though Im coming from hboot 1.12? it says it 2.09 wont work?
lexcoupe2100 said:
Downlaod the RUU even though Im coming from hboot 1.12? it says it 2.09 wont work?
Click to expand...
Click to collapse
You're right, download either of the other two. 1.22 or 2.13.
lexcoupe2100 said:
Downlaod the RUU even though Im coming from hboot 1.12? it says it 2.09 wont work?
Click to expand...
Click to collapse
tilltheend714 said:
You're right, download either of the other two. 1.22 or 2.13.
Click to expand...
Click to collapse
Ok, is currently flashing 2.13 after its done i can take OTA for jb?
lexcoupe2100 said:
Ok, is currently flashing 2.13 after its done i can take OTA for jb?
Click to expand...
Click to collapse
As long as you don't install a custom recovery or anything you should be able to accept the ota.
ok finally!! thank you all for great help and fast response, i am currently getting the OTA update Now if I want to unlock again and install custom ROM I can do that?
lexcoupe2100 said:
ok finally!! thank you all for great help and fast response, i am currently getting the OTA update Now if I want to unlock again and install custom ROM I can do that?
Click to expand...
Click to collapse
If you take the 3.16 OTA, only the newest version of TWRP (2.4.1.0) will work. And the only roms you'll be able to use are those that use 3.16 as a base. Any other base and the touchscreen might not work.
lexcoupe2100 said:
ok finally!! thank you all for great help and fast response, i am currently getting the OTA update Now if I want to unlock again and install custom ROM I can do that?
Click to expand...
Click to collapse
Yes click the link in my sig
Sent from my PoS MoPho
bigdaddy619 said:
Yes click the link in my sig
Sent from my PoS MoPho
Click to expand...
Click to collapse
Ok I will check that out why is my baseband version still 1.12.11.1210?
lexcoupe2100 said:
Ok I will check that out why is my baseband version still 1.12.11.1210?
Click to expand...
Click to collapse
That's the radio for 3.16. It's the latest.
I am have to laugh at the original poster now. I don't want to go through the hassle of getting s-off! But now look at all the hassles you have. S-off is an easier and less hassle procedure!
Sent from my A500 using Tapatalk
i have *tempered* *unlocked* s-on hboot-2.09.0000 radio-1.12.11.1210 and twrp on my htc evo 4g lte
have tried to flash ruu 1 and 3 but they stock on htc screen
i have flash http://forum.xda-developers.com/showthread.php?t=2142977 rom because it is with s-on, and now phone didnt respond to touch, but it still respond to touch in recovery
please advice me some roms that i can flash with s-on
thanks
You can not flash any rom that is not based on 3.16. You are s-on and have the latest update which included a touch panel driver update that is incompatible with any rom that is not based on the newest software. TWRP was updated to support this new driver that is why your recovery works. Only options for you are to run a rom based on 3.16 or go s-off and downgrade the touch panel software.
Same Boat
cruise350 said:
You can not flash any rom that is not based on 3.16. You are s-on and have the latest update which included a touch panel driver update that is incompatible with any rom that is not based on the newest software. TWRP was updated to support this new driver that is why your recovery works. Only options for you are to run a rom based on 3.16 or go s-off and downgrade the touch panel software.
Click to expand...
Click to collapse
Ok, so I'm in the same boat. If i knew better I would have tried to s-off from the get go. Now I cant use CM10.1 and I'm stuck on Meanbean @ 3.16.651.3.
My question is how do you downgrade without "soft-bricking" the phone so I can go s-off? DirtyRacun cant s-off 3.16.65.3 but it can do .16. I'm just trying to go S-off to avoid all this BS. hahaha
Ajamin24 said:
Ok, so I'm in the same boat. If i knew better I would have tried to s-off from the get go. Now I cant use CM10.1 and I'm stuck on Meanbean @ 3.16.651.3.
My question is how do you downgrade without "soft-bricking" the phone so I can go s-off? DirtyRacun cant s-off 3.16.65.3 but it can do .16. I'm just trying to go S-off to avoid all this BS. hahaha
Click to expand...
Click to collapse
DirtyRacun CAN do 3.16.651.3 you have to use BabyRacun first
i have make s-off, now can you any rom and it will work?
bigdaddy619 said:
DirtyRacun CAN do 3.16.651.3 you have to use BabyRacun first
Click to expand...
Click to collapse
SWEET!!:victory: I'll be trying this tonight!! I thought I read that babyRacun was for pre 2.09 hboot... Sorry I'm a noob with this phone. just got it off ebay 3 weeks ago.
Thanks for the help.
Ajamin24 said:
SWEET!!:victory: I'll be trying this tonight!! I thought I read that babyRacun was for pre 2.09 hboot... Sorry I'm a noob with this phone. just got it off ebay 3 weeks ago.
Thanks for the help.
Click to expand...
Click to collapse
3.16 has hboot 2.09
Sent from my PoS MoPho
bigdaddy619 said:
3.16 has hboot 2.09
Click to expand...
Click to collapse
I deff read the instructions wrong, I did say I was a noob with this phone hahaha, and totally skipped the Baby Racun step. HAHAHA
BUT now, I'm S-Off, :victory: dirty racun/ baby racun worked perfectly. I even restored back to MeanBean with no issues. Soon I will be trying CM10 or 10.1, hope I can follow directions this time :fingers-crossed:
Now your s-off all you need to do to flash cmx or cmx.1 is wipe and flash. Don't forget to downgrade that touch panel or you won't be able to run any aosp roms
Sent from my EVO using xda premium