i need help,I am download and install Clockworkmod 5.5.0.4,after that in Rom toolbox,I am clicked on the reboot in recovery,after that he always back into recovery mode and it can not run it, but it said clockworkmod recovery, I tried to reboot to work but again nothing,he again back.Please,help me..???
A little more details would be good. What device do you have? And to clarify, you clicked boot into recovery and even after a battery pull it didn't boot?
techno-update said:
A little more details would be good. What device do you have? And to clarify, you clicked boot into recovery and even after a battery pull it didn't boot?
Click to expand...
Click to collapse
Yes,I have sammsung galaxy s plus gti9001,I can't be back in normal,always in recovery..there i am typing all stuff,backup than restore,than wipe cache,factory reset,root zip,unroot zip.....I want back in normal,i don't care if I lose old aplication,or contact,or messages....
I've had the same Problem. Look at this Thread.
edit : Only use Odin 4.43 for the S+. Unzip on PC.
lecter100 said:
I've had the same Problem. Look at this Thread.
edit : Only use Odin 4.43 for the S+. Unzip on PC.
Click to expand...
Click to collapse
again problem,when try enter in download mode,it says RAMDUMP MODE,wtf is that?
All answers are here in the GalaxyS+Wiki. By the way : You can't use RomToolbox or RomManager for installing CWM on the S+. You need a file for Odin or a flashable zip.
thanks all for advice...problem resolved...I installed new firmware 2.3.6..and he work,but i have another problem,when I try install application from market,my samsung before the end of the installation is reset, and so constantly, why????
Related
So I have installed ADB on my computer and rotted the ace but I still dont understand how to actully install he recovery, do I have to use adb? If so how do I do it? I tried reading the instructions but they are very vague.
andoridkiller said:
So I have installed ADB on my computer and rotted the ace but I still dont understand how to actully install he recovery, do I have to use adb? If so how do I do it? I tried reading the instructions but they are very vague.
Click to expand...
Click to collapse
no you dont need of ADB ,
1) Turn off your phone
2)Reboot on recovery.
by Pressing power button and home button until you see "SAMSUNG" Text.
3)click on apply sdcard:update.zip and select the file named "ClockWorkModAce.zip"
5. it will install within few seconds....
"reboot system now".
Then turn off your phone again and enter recovery AGAIN.
as simple as that
Download - ClockWorkModAce.zip
And if you also want to install Cyanogen MOD 7.1 view my tutorial
[Tutorial] How to flash recovery mode & install Cyanogen 7.1 on Ace
I think, if u use stock recovery u have to rename CWM to update.zip I think, stock recovery dont have option to choose zip file to instal only search for update.zip I think that;p Sorry, if I'm wrong
Send from my Ace by Tapatalk.
i was rooting my galaxy note and i was flashing CWM and its stuck in ODIN with recovery.img Help please...
Is still stuck? ...what file where you flashing? Are you flashing the right version for your phone?
wish777 said:
Is still stuck? ...what file where you flashing? Are you flashing the right version for your phone?
Click to expand...
Click to collapse
i was flashing CWM from galaxynote.com i think it was showing the root method, and it was stuck at recovery.img but i did a battery pull and my phone booted normally(thank god.) Can you perhaps give me the link to the correct files so i can root this device? please and ty
Everything you need is in the DEV section. ODIN CWM dated 4/14 I think then flash SU for ICS. There was a thread for that and I am sure it is in the how to root threads as well.
Done.
thegoob said:
i was flashing CWM from galaxynote.com i think it was showing the root method, and it was stuck at recovery.img but i did a battery pull and my phone booted normally(thank god.) Can you perhaps give me the link to the correct files so i can root this device? please and ty
Click to expand...
Click to collapse
Flash this with Odin. You'll be ok.
http://thinkleet.de/cwm/cwm-touch-i717-120414.tar.md5
Org.Thread :http://forum.xda-developers.com/showthread.php?t=1584576
and Flash superuser with cwm:
http://forum.xda-developers.com/showthread.php?t=1581185
Texantx said:
Flash this with Odin. You'll be ok.
http://thinkleet.de/cwm/cwm-touch-i717-120414.tar.md5
Org.Thread :http://forum.xda-developers.com/showthread.php?t=1584576
and Flash superuser with cwm:
http://forum.xda-developers.com/showthread.php?t=1581185
Click to expand...
Click to collapse
okay i tried this and it still hangs, wth am i doing wrong.
thegoob said:
okay i tried this and it still hangs, wth am i doing wrong.
Click to expand...
Click to collapse
ICS leak 4.03 right ?
Be alittle more specific please.. are you rooting 2.3.6 or a ics platform? Then we can help better to narrow down what you need..
Texantx said:
ICS leak 4.03 right ?
Click to expand...
Click to collapse
yes, the UCLD3 leak, att galaxy note
Have you seen this thread?
http://forum.xda-developers.com/showthread.php?t=1518962
thegoob said:
yes, the UCLD3 leak, att galaxy note
Click to expand...
Click to collapse
Ok follow the steps:
1- Download CWM File to your computer; download superuser file to your phone sdcard.
2-put your phone to download mode and Flash CWM with odin; when finish it will restart your phone.
3- Reboot your phone to recovery.
4- From Recovery menu : install zip from sdcard ; find superuser zip and flash. when flash finished > reboot .
Texantx said:
Ok follow the steps:
1- Download CWM File to your computer; download superuser file to your phone sdcard.
2-put your phone to download mode and Flash CWM with odin; when finish it will restart your phone.
3- Reboot your phone to recovery.
4- From Recovery menu : install zip from sdcard ; find superuser zip and flash. when flash finished > reboot .
Click to expand...
Click to collapse
i was following the steps, but it wont flash it. i tried multiple usb ports and still nothing =/
thegoob said:
i was following the steps, but it wont flash it. i tried multiple usb ports and still nothing =/
Click to expand...
Click to collapse
I had the same issue with the original ICS leak. Odin had issues running on my pc because it is a 64bit machine and ended up making the phone unbootable i switched to a old 32bit computer instead and it worked flawlessly.
Hi all.
So, I tried to flash the WANAMLITE rom and now my phone is stuck on the logo after reboot and there is a red exclamation mark at the top left.
I used TWRP recovery, I did a regular factory settings wipe and after that i flashed the rom. at the end insted of just rebooting the phone
I told TWRP to install SU. what I did wrong? and how can I fix this?
REGARDS : )
HyperSM said:
Hi all.
So, I tried to flash the WANAMLITE rom and now my phone is stuck on the logo after reboot and there is a red exclamation mark at the top left.
I used TWRP recovery, I did a regular factory settings wipe and after that i flashed the rom. at the end insted of just rebooting the phone
I told TWRP to install SU. what I did wrong? and how can I fix this?
REGARDS : )
Click to expand...
Click to collapse
the recovery "might" not be allowed to flash >guess<. try flashing the latest CWM touch recovery and then flash wanam rom through it.
sriram231092 said:
the recovery "might" not be allowed to flash >guess<. try flashing the latest CWM touch recovery and then flash wanam rom through it.
Click to expand...
Click to collapse
Will do, question is how can I download & install CWM over my existing recovery if I can't start my phone properly?
sorry for the newbie question : )
HyperSM said:
Will do, question is how can I download & install CWM over my existing recovery if I can't start my phone properly?
Click to expand...
Click to collapse
can you enter download mode? if yes, then flash cwm.tar file via odin.
HyperSM said:
Will do, question is how can I download & install CWM over my existing recovery if I can't start my phone properly?
Click to expand...
Click to collapse
First read the faqs and guides before playing with firmware .
Suggest you read TWRP instructions and flash via Odin .
OK
Thank you both, will post results..
ok so I've read a lot of guides and FAQs
and I tried to flash CWM that will replace the corrent TWRP, problem is, odin doesn't recognize my phone anymore, insted of a blue box there is a yellow one..
what does it mean? (BTW - I uninstalled KIES, I reinstalled the samsung usb drivers, and connected the usb cable to a diffrent usb plug)
READ ALL THE INSTRUCTIONS.
DON'T FORGET TO BACKUP YOUR EFS FILES AND NANDROID BACKUP
WARRNING : YOUR ARE DOING THIS ON YOUR OWN RISK !
instructions to Flash TWRP on your GT-i9300 using Odin:
1- download the latest Odin ver. ( http://forum.xda-developers.com/showthread.php?t=1738841 )
Or download Odin Via mobile.
2- download the latest .tar of TWRP ( http://techerrata.com/browse/twrp2/i9300 )
3- put your device in download ( home + power + Down )
4- open Odin as administrator
5- check Auto Reboot and F.Reset Time ONLY !
6- put your .tar File in PDA part only.
7- dont unplug your device till you see the Blue sign of DONE!
Volla now you're on TWRP latest version
( FOR MORE INFO : http://teamw.in/project/twrp2/114 )
darki0xox said:
can anyone provide me with link for 2.7.0.0 of TWRP for GT-i9300
and i have CWM already , does it affect anything when i flash the TWRP ?
Click to expand...
Click to collapse
You could try the zip in this post: http://forum.xda-developers.com/gal...-2-6-3-0-touch-recovery-t1943592/post50943534
Then you could just flash that using CWM. And yes it does affect things when you flash it as it changes your recovery from CWM to TWRP which is more touch screen based, easier to use as well as being a lot more powerful than a basic CWM. Having changed you may find TWRP doesn't find your previous backups. This is usually as both of those recoveries tend to save them in different places and it's just looking in the wrong place for the files. You can either change the settings to a CWM style restore or just run a new backup through TWRP and delete the old CWM one.
pjcarrmole said:
You could try the zip in this post: http://forum.xda-developers.com/gal...-2-6-3-0-touch-recovery-t1943592/post50943534
Then you could just flash that using CWM. And yes it does affect things when you flash it as it changes your recovery from CWM to TWRP which is more touch screen based, easier to use as well as being a lot more powerful than a basic CWM. Having changed you may find TWRP doesn't find your previous backups. This is usually as both of those recoveries tend to save them in different places and it's just looking in the wrong place for the files. You can either change the settings to a CWM style restore or just run a new backup through TWRP and delete the old CWM one.
Click to expand...
Click to collapse
thanks , and i made this post like a tutorial ^_^ <3
Guys, everytime I flash twrp using ODIN it goes down as a success. And it reboots the phone. But then I shut down the phone and reboot to recovery its once again the default Samsung Recovery. The phone is not rooted. How do I prevent the original recovery from overwriting the TWRP recovery?
lurker316 said:
Guys, everytime I flash twrp using ODIN it goes down as a success. And it reboots the phone. But then I shut down the phone and reboot to recovery its once again the default Samsung Recovery. The phone is not rooted. How do I prevent the original recovery from overwriting the TWRP recovery?
Click to expand...
Click to collapse
Just use the TWRP Manager from the Play Store. Root the phone http://forum.xda-developers.com/showpost.php?p=33305792&postcount=3 and install the manager.
@lurker316: forget TWRP-manager. The only extra step, you need, is a factory reset. So backup all your data before. To avoid reboot after flashing TWRP, either uncheck reboot in Odin or pull out battery after succeeded flash.
Hi guys, i have a problem with my phone, I tryed to re-root it after upgrading to android 4.3, now the only response i get from the phone is download mode and that happens only when it's plugged in, I applied this TWRP but i still have the same problem. please if anyone has an idea, help!
here's my post if you need more details:
http://forum.xda-developers.com/galaxy-s3/help/s3-boot-plug-computer-to-download-mode-t3380912
a reply from a dear xda person
lurker316 said:
Guys, everytime I flash twrp using ODIN it goes down as a success. And it reboots the phone. But then I shut down the phone and reboot to recovery its once again the default Samsung Recovery. The phone is not rooted. How do I prevent the original recovery from overwriting the TWRP recovery?
Click to expand...
Click to collapse
try turning off auto reboot sometimes samsung reverts itsel to the stock recovery
cuz samsung knows evrything
I am on Samsung Grand Quattro. I have a rooted device. My phone has cwm installed. I tried to backup my existing rom and flash a new one. the new rom was flashed correctly. But now my phone directly boots to cwm. I tried to reflash cwm but my bootloader is not recognized by my PCs. I tried adb to go to bootloader but phone boots only to cwm. Please help me reflash cwm using odin. :crying:
You can either use cwm to flash stock recovery and exit the bootloop or enter on download mode and reflash cwm
Did what u said
freitaz said:
You can either use cwm to flash stock recovery and exit the bootloop or enter on download mode and reflash cwm
Click to expand...
Click to collapse
I downloaded the stock recovery firmware. Flashed it. Now i get Samsung with that yellow triangle. and then nothing. no recovery, no bootloader. I feel like i have lost my device :crying:
AKANFatality said:
I downloaded the stock recovery firmware. Flashed it. Now i get Samsung with that yellow triangle. and then nothing. no recovery, no bootloader. I feel like i have lost my device :crying:
Click to expand...
Click to collapse
And about download mode, have you tried it? Do you know how to enter on this mode, right?
(BTW, are you calling "download mode" bootloader?)
Bootloader is accesible
freitaz said:
And about download mode, have you tried it? Do you know how to enter on this mode, right?
(BTW, are you calling "download mode" bootloader?)
Click to expand...
Click to collapse
yup i can access the downloader mode (bootloader). But it doesn't connect to the pc.....
Update: I tried it again, but now only the samsung screen appears with the yellow triangle and then it switches off. No bootloader, no cwm....
AKANFatality said:
yup i can access the downloader mode (bootloader). But it doesn't connect to the pc.....
Click to expand...
Click to collapse
It can be a problem with your drivers. Have you already installed Kies? This program provides drivers for your device, so Odin will be able to recognize it.
And, well... if you can't enter on download mode, I think you will need to have technical support
freitaz said:
It can be a problem with your drivers. Have you already installed Kies? This program provides drivers for your device, so Odin will be able to recognize it.
And, well... if you can't enter on download mode, I think you will need to have technical support
Click to expand...
Click to collapse
thanks for ur reply. yes i have kies installed. i hear the sound when i connect the phone but it does not get actually connected. i just see a msx77m7 kind of device attached with error. and i can't fix it anyhow.
AKANFatality said:
thanks for ur reply. yes i have kies installed. i hear the sound when i connect the phone but it does not get actually connected. i just see a msx77m7 kind of device attached with error. and i can't fix it anyhow.
Click to expand...
Click to collapse
just uninstall kies & samsung drivers from pc, go to download mode and connect it it should automatically install drivers (Use Odin To do it)
windowsvistas said:
just uninstall kies & samsung drivers from pc, go to download mode and connect it it should automatically install drivers (Use Odin To do it)
Click to expand...
Click to collapse
just saw ur post buddy. thanks for taking the trouble and helping me out. I fixed my phone just now. I charged it a little. Kept trying to go to bootloader. Once it started i reinstalled the drivers. Voila, bootloader connected. I immediately used odin to flash fresh cwm and my rom that i had already installed started working. Thanks!:good::victory: