I followed these steps from streakdroid 1.9 to 2.3:
flashed AMSS with fastboot.
fastboot -i 0x413c flash amss amss.mbn
Flashed DSP1
Click to expand...
Click to collapse
fastboot -i 0x413c flash dsp1 dsp1.mbn
Click to expand...
Click to collapse
Both amss and DSP1 downloaded from the mainpage of XDA
Booted into recovery mode did a factory reset from dell menu. But when I try to install gingerstreak located at the root of the sdcard I get the dreaded assert failed error
assert failed: write_raw_image("/tmp/boot.img","boot")
E:Error in /sdcard/GS2_3beta2.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
I am though able to install streakdroid 2.0 without any problems. But I get too many random reboots with it. The base band shows to be
GAUSB1A140314-US
KERNEL 2.6.35.7-PERF
Is there a way to find out the AMSS version
Do I need to change the sequence DSP1 first then AMSS or something?
What am I doing wrong here. Please help
TIA
nutcr0cker said:
I followed these steps from streakdroid 1.9 to 2.3:
flashed AMSS with fastboot.
Both amss and DSP1 downloaded from the mainpage of XDA
Booted into recovery mode did a factory reset from dell menu. But when I try to install gingerstreak located at the root of the sdcard I get the dreaded assert failed error
I am though able to install streakdroid 2.0 without any problems. But I get too many random reboots with it. The base band shows to be
GAUSB1A140314-US
KERNEL 2.6.35.7-PERF
Is there a way to find out the AMSS version
Do I need to change the sequence DSP1 first then AMSS or something?
What am I doing wrong here. Please help
You may have something out of sync... first of all no need to root separately because the ROM comes rooted
I would flash stock ROM 360 recovery and then the ROM to get e erything back in sync
Once you have let the stock ROM maybe boot a couple times go into fastboot and flash the amss and the dsp1files and then let it boot a couple more times
Fastboot again and flash Streakmod and then boot into recovery and flash your custom ROM
This procedure is what has worked for me... hope it helps you out
Click to expand...
Click to collapse
Thanks for the reply cdzo72 but where do I find the 2.2 stock rom for the streak? The problem now I have is that the phone does not recognize my SIM card, probably the baseband mess up or the dsp1. The previous baseband file was GAUSB1A140314-US I was able to find the 315 baseband file but got the same error of simcard not found. Is there a 314 baseband file?
nutcr0cker said:
Thanks for the reply cdzo72 but where do I find the 2.2 stock rom for the streak? The problem now I have is that the phone does not recognize my SIM card, probably the baseband mess up or the dsp1. The previous baseband file was GAUSB1A140314-US I was able to find the 315 baseband file but got the same error of simcard not found. Is there a 314 baseband file?
Click to expand...
Click to collapse
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak
That's the link for the Dell Streak Wiki where you will find all the info you need. I would update to the latest retail 360 ROM which will update all your phone's files.
i found a way around the dreaded
assert failed: write_raw_image("/tmp/boot.img". "boot")
E:Error in /sdcard/GS2_3beta2.zip
(Status 7)
Installation aborted.
i was running froyo 2.2 and had to downgrade to 2.1 to be able to root and install modding apps such as streakmod, i followed all of the proper steps to install streakdroid. and i got the same error, so i went back and i made a copy of the "boot.img" from the zip. copied it to my c:/streak folder and flashed the "boot.img" before i installed the rom. then installed the rom. you still get the install error. shutdown the device disconnect battery then reboot the device and the rom is installed. it unpacks everything except the boot.img but since its already been flashed it'll boot. i've been running the beta version for 3 weeks now and no hangups or random reboots. *do this at your own risk* i didnt think it would work and i havent seen anyone else try this. i wont be held responsible if you brick. i might have just gotten lucky. but it did work for me. and its very stable on my streak5
I was trying to install a rom with the help of boot menu manager and something went wrong in the process.
When I was stuck in a bootloop i tried searching and asking for help and tried to follow this
guide:-http://forum.xda-developers.com/showthread.php?t=1883640
but after i switched to ap fastboot and tried to install the ota from my ext sd-card I got an error,
error in /tmp/sideload/package.zip
(status 7)
restoring config start
restoring config end
installation aborted.
Please help ! I dont think I did anything wrong in this guide except fro renaming boot_new_41.img to boot_new.img as cmd was not taking such a coomand with improper filename.
Thanks in advance.
you can try sbf: http://sbf.droid-developers.org/cdma_spyder/list.php HOW TO USE IT:
http://forum.xda-developers.com/showthread.php?p=23453478
or flash fastboot files (fastboot restore): http://www.droidrzr.com/index.php/t...-182-windows-for-verizon-droid-razrmaxx-only/
I have an HOX+. I tried installing Cyanogenmod on it through CWM recovery. However, the installation got aborted in between and it read something like this.
Finding update package...
Installing update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "enrc2b" | | getprop("ro.build.product") == "enrc2b"
E:Error in /sdcard/0/cm-10.1.3-enrc2b.zip
(status 7)
Installation Aborted.
I figured I have to install the boot.img file first before flashing the rom. So I flashed the boot.img file from PC using fastboot command prompt. After that I tried to install the Cyanogen again through CWM but got the same message again and worse still, now my device is stuck in bootloop. Fastboot and CWM still work but the device doesn’t go beyond the “HTC quietly brilliant” logo when I try to switch it on.
I tried restoring the nandroid backup which I made in CWM. The restoration process finishes without any hiccups(or at least that’s what CWM shows) but phone’s still stuck in bootloop.
Any help would be much appreciated.
Flash the boot.img out of your nandtoid
Sent from my HTC One X+ using Tapatalk
Hello All ,
Need to install cyanogenmod 10 , but my boot loader is locked .
Can someone please upload files as all most all links are broken.
Or if you could send files through Email.
[email protected]
im still running on Android 2.3.4..
r_grsh said:
Hello All ,
Need to install cyanogenmod 10 , but my boot loader is locked .
Can someone please upload files as all most all links are broken.
Or if you could send files through Email.
[email protected]
im still running on Android 2.3.4..
Click to expand...
Click to collapse
I had nothing to do so I searched for the files, specially the photon_pudding.rar . Most of the links were dead but fortunately I found one that still alive. The site is the following: http://forum.motofan.ru/?showtopic=1731307
I attached some of the files to this post.
Thank you Reiki21
Thanks a lot.
I was about to loose hope on this.
Can you please guide me on how to unlock bootloader.
Do i keep them in ZIP format or will have to use RAR format.
r_grsh said:
Thanks a lot.
I was about to loose hope on this.
Can you please guide me on how to unlock bootloader.
Do i keep them in ZIP format or will have to use RAR format.
Click to expand...
Click to collapse
There's a guide to unlocking the Photon 2.3.4 bootloader here: http://androidforums.com/photon-4g-...-all-things-mopho-06-11-12-a.html#post4270549
Trying to install cyanogenmod 10
This is the error message i get::
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
Installation aborted
not sure whats wrong
When i reboot it say unlocked at the top but when i try to access android recovery to install cyogenmod 10 i just get a ! in a triangle and android symbol.I try pressing both volume up n down button together i just get the following screen(attached)
which has following options
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
On trying :: apply update from sd card
This is the error message i get::
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
Installation aborted
r_grsh said:
When i reboot it say unlocked at the top but when i try to access android recovery to install cyogenmod 10 i just get a ! in a triangle and android symbol.I try pressing both volume up n down button together i just get the following screen(attached)
which has following options
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
On trying :: apply update from sd card
This is the error message i get::
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
Installation aborted
Click to expand...
Click to collapse
Did you flash cwm recovery? If not then you can download it from here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.8-sunfire.img
To flash it go into fastboot mode and use the following comand:
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img
unlock failed
I tried to unlock again , this time it ran for 98% and failed , but still when i boot it shows unlocked
I wouldn't use RSD after unlocking my phone, if the process of RSD flashing is interrupted (The usb cable got disconected, a black out, etc) the phone would most likely hard brick. You said it flashed until 98%, can you still access the menu by pressing power and vol -?
yes
yes can access menu can you still access the menu by pressing power and vol
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img this img doesnot run in demon tool
Can you msg ur num to [email protected] , ill msg u on watsup all pics step by step
r_grsh said:
yes can access menu can you still access the menu by pressing power and vol
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img this img doesnot run in demon tool
Can you msg ur num to [email protected] , ill msg u on watsup all pics step by step
Click to expand...
Click to collapse
Sadly I don't have whatsup, anyways I think you just need to flash the custom recovery to be able to flash cm10. If you downloaded moto-fastboot from my attachments, unzip it on the root of you hard disk (C:\). After that copy the recovery-clockwork-5.0.2.8-sunfire.img inside moto-fastboot-win32 folder (C:\moto-fastboot-win32) See the attachment
Put your phone into fastboot mode by pressing the power button and vol -, when you see fastboot below the word unlocked press vol +
Open CMD and type:
cd \moto-fastboot-win32
moto-fastboot flash recovery recovery-clockwork-5.0.2.8-sunfire.img
moto-fastboot reboot
After that you should have a new recovery menu.
done
On doing this i got the following message::
flashing partition recovery
flashing mbr to device
flashing stormgr partition : sos
what would be the next step
After that reboot your phone using moto-fastboot reboot. Now enter the recovery menu and try to flash your rom.
unable to restart
r_grsh said:
On doing this i got the following message::
flashing partition recovery
flashing mbr to device
flashing stormgr partition : sos
what would be the next step
Click to expand...
Click to collapse
now the only way to restart is by removing battery .as nothing happens on power button nor volume keys
after that trying to install cyo10 says error in \sdcard\cm-....
(status 0)
CM 10
Can you please upload any working CM 10 \ 9 .
Might be the rom im trying to install is corrupt
Which CM10 version are you trying to install? Can you provide me the link to the thread?
cm-10.1.3-xt897
cm-10.1.3-xt897
this is the one im trying , not sure where i found it .
think this is the one
https://download.cyanogenmod.org/?device=xt897
I see what's wrong that CM10 rom is for another phone, the Photon Q. This phone is the Photon 4G (MB855) which I know would confuse anyone >.< You just need to find the right CM10 for your phone and install it. I'll try to find some links and provide them to you if you can't find any.
---------- Post added at 11:44 AM ---------- Previous post was at 11:24 AM ----------
These are some JB roms I found by Th3Bill on https://www.androidfilehost.com/?w=files&flid=1911
cm-10.1-20130212-UNOFFICIAL-sunfire_fixed.zip
https://www.androidfilehost.com/?fid=9390288116658474446
cm_10_20121127_UNOFFICIAL_sunfire.zip
https://www.androidfilehost.com/?fid=9390225151984926850
BeanStalk-1.168-sunfire.zip
https://www.androidfilehost.com/?fid=9390362690511176432
sunfire_PAC_jb_alpha_v18.0.0.zip
https://www.androidfilehost.com/?fid=9390225151984926883
pa_sunfire_2.99_22NOV2012_094228.zip
https://www.androidfilehost.com/?fid=9390225151984927016
MIUIAndroid_Sunfire_3.2.8.zip
https://www.androidfilehost.com/?fid=9390288116658473841
MIUI.us.Sunfire_3.5.31_Eng_Deo_ZipA_Signed.zip
https://www.androidfilehost.com/?fid=22979706399754725
Liquid_JB_v2.0_RC9_sunfireB.zip
https://www.androidfilehost.com/?fid=9390225151984927186
kingkang_sunfire_ota_20121206B.zip
https://www.androidfilehost.com/?fid=9390225151984927184
Gapps contain the playstore and you should install it after the rom is installed
th3bill_gapps_jb_4.2.zip
https://www.androidfilehost.com/?fid=9390248398092765283
Note that these are roms ranging from 2012 to 2013, unfortunately Th3Bill had to leave development and there seem to be no new roms.
Failed again
cm-10.1-20130212-UNOFFICIAL-sunfire_fixed.zip
https://www.androidfilehost.com/?fid...88116658474446
cm_10_20121127_UNOFFICIAL_sunfire.zip
https://www.androidfilehost.com/?fid...25151984926850
downloaded both
Followed video
http://www.youtube.com/watch?v=RwmjnqDEO-I
option for rom
tweaked and standard
tried both
emmc or ext sd as primary sd
Selected EMMC
after instaling
Installer finished
while rebooting
e: error in sdcard\.....
(Status 0)
Installation aborted
After which installed gapps which completes , on rebooting i just get the logo screen with unlocked on top left and sits there for eternity
Try to follow these steps in recovery
Wipe Data / Cache
Install CM10
Reboot and wait until the device starts cm10, this may take some minutes
If CM10 starts successfully, then reboot to recovery and install gapps, after that reboot the device
If this did not work and you still in the motorola logo, then we are missing something
Hi. I unlocked bootloader on my ZTE Axon 7 mini B12. I did everything like here. Next step I want was deploy TWRP with this tuliptool and with this img. Unfortunately, though I received a message on terminal "Success!" i didn't have TWRP and I still had standard recovery (and I still have). I read that I have to first upgrade my 6.0.1 to 7.1.1, so I tried update like here. One again unfortunately update failed. Next step was install boot images this thread. After that I have never ending bootloop.
So, now only what I can is boot to standard recovery and try do something with adb sideload. When I try "adb devices" i see my phone but with "unauthorized". When I try install new recovery or rom with "adb sideload <package>" i have an error in terminal:
Code:
connecting...
Total xfer: 0.00x
and on phone:
Code:
Finding update package...
Opening update package
Veryfing update package
E:footer is wrong
E:signature verification failed
E:open file /cache/fora/error_code error errno = 2
Instalation aborted
Have anyone some resolution to install new ROM, new recovery or connect to adb with recovery?