CM9 question - Motorola Droid X2

So I flashed CM9. On the main screen. Go to touch the little android dude and it says "unfortunately setup Wizard has stopped" and now idk how to get around or fix it?
can anyone shed any light on the subject?
Thanks in advanced
-35se

Tried to re-install but its not letting me. Guess that S3 is gonna come earlier than I expected... Which means missing out on the quadzillas coming later this year :/

What was your process of doing things? Start from the beginning. Just simply saying it didnt work doesnt help. Where you coming from a different ROM? Did you make sure you were on android 2.3.4? Did you wipe data, cache and dalvik cache before flashing? Let us know the steps you took.

Re download cm9 and gapps, sbf and try again and follow the directions word for word, don't just think you got it, follow the steps
Sent from my MB870 using xda app-developers app

Came from CM7. I ended up just clicking the screen like mad in frustration and somehow it went to home screen....
I think maybe Gapps didnt install correctly bc im getting error messages about gapps. But when i went to re-install it, it just freezes the phone in recovery and i have to pull the battery.

35se said:
Came from CM7. I ended up just clicking the screen like mad in frustration and somehow it went to home screen....
I think maybe Gapps didnt install correctly bc im getting error messages about gapps. But when i went to re-install it, it just freezes the phone in recovery and i have to pull the battery.
Click to expand...
Click to collapse
You are using the ICS gapps right? Not the Same gapps file you used for CM7?

jsgraphicart said:
You are using the ICS gapps right? Not the Same gapps file you used for CM7?
Click to expand...
Click to collapse
Yes the gapps off this site. Every time i go to re-install them it just gets stuck. Any suggestions? should i just wipe everything and try again?
Im not to worried about messing it up again bc im getting an S3 today. I would just like to figure it out so i can do it for my brothers X2.

LordRalh3 said:
Re download cm9 and gapps, sbf and try again and follow the directions word for word, don't just think you got it, follow the steps
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
+1

Related

[Q] Miui hangs at vibrant screen

I've been trying to get this on my phone since yesterday..i probably followed the directions over 10 times..and no matter what i do it just hangs at vibrant screen. i tried installing cm7 to see if i was doing everything correctly, it worked..then i tried with miui. big fail..i can't figure out what is going on
JinNguice said:
I've been trying to get this on my phone since yesterday..i probably followed the directions over 10 times..and no matter what i do it just hangs at vibrant screen. i tried installing cm7 to see if i was doing everything correctly, it worked..then i tried with miui. big fail..i can't figure out what is going on
Click to expand...
Click to collapse
Maybe it's a bad download. Try to redownload then reinstall it.
this would be the first time in life i'd have ever had a bad download..i'll try it..thank you
didnt work..lol maybe my vibrant doesn't like miui..sucks for me
Your downloading the rom, not the update right?
since its my first time flashing it..wouldn't MIUI 1.4.1 be the rom or is that the update? or is there somewhere i'd have to start off with
Sounds like whatever package you flashed doesn't have a kernel.
Segnaro said:
Sounds like whatever package you flashed doesn't have a kernel.
Click to expand...
Click to collapse
I've been at this all day..would you be so kind to point me in the right direction..
Go to mounts and storage and go to wipe system data and cache install rom then wipe factory reset
Sent from my SGH-T959 using XDA App
I know I followed directions to the T because I'm running cm7 and its my first time posting because I just couldn't figure this one out..grrr
Sent from my SGH-T959 using XDA App
JinNguice said:
I know I followed directions to the T because I'm running cm7 and its my first time posting because I just couldn't figure this one out..grrr
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Download miui_T959_1.4.1_2.3.zip
Go into clockwork. Format /system, /cache, /data . Flash the zip.
Segnaro said:
Download miui_T959_1.4.1_2.3.zip
Go into clockwork. Format /system, /cache, /data . Flash the zip.
Click to expand...
Click to collapse
done and currently hanging.. i'm confused
okay it works!!! which is weird because i went back to odin the cm7 kernal and i tried to go into recovery and it rebooted... weird method but i'll run with it

Stuck in bootloop after trying to flash eclipse 0.3

I couldnt post this there, so im posting it here
I've flashed 2 other versions of this rom successfully in the past. The only difference is this time is factory reset it first. Then attempted to flash the rom. the Rom gave me an error, and thats when the bootlooping started.
I tried factory resetting, deleting cache, leaving battery out for 30 seconds.
Im stuck at the Moto screen
SO, what do i do? is there any pertinent information im leaving out?
Your going to want to flash the sbf, full instructions are in a thread in the development section, don't have access to the link at the moment I'm mobile, sorry mate.
Sent from my DROID X2 using XDA App
ok.
Is there any way to make sure this doesnt happen again? This is such a process
You could also try plugging the phone into a wall when its off to see if you can get into BSR and either restore a backup or try to flash again.
Sent from my DROID X2
lacross said:
Is there any way to make sure this doesnt happen again? This is such a process
Click to expand...
Click to collapse
It IS a bit of a process to go thorough. Part of the price to pay if you're gonna modify, I guess. If the suggestion above about trying the BSR program (Bootstrap Recovery program, also called "System Recovery" in app drawer) doesn't work for you, then SBF to stock, which should get you back live, then flash P3 rooted Gingerbread, then Eclipse. That will work. All the links with instructions and downloads have been graciously provided here by our Moderator, The Clown.
As you already know, Eclipse has loaded fairly easily in the past, and wiping data is the recommended procedure. While not absolutly necessary, it has helped others resolve problems they had after loading Eclipse in the past, so I wouldn't be afraid to do it. It's hard for anyone to say for sure why this happened to you this time. The process is a bit touchy, reqireing you to follow the instructions exactly - including, for example, plugging in the phone to a wall charger while using the System Recovery program. Perhaps you inadvertently left out some step along the way.
I dont THINK i did, but hey, i wouldnt doubt it.
Anywho, just for an update, im now pre-rooted GB, waiting for nitro to update the eclipse rom.
Problem is now, i dont have 3g. i tried *228 multiple times
Robin M said:
...the links with instructions and downloads have been graciously provided here by our Moderator, The Clown.
Click to expand...
Click to collapse
Thats MR. Clown to you!
lacross said:
I dont THINK i did, but hey, i wouldnt doubt it.
Anywho, just for an update, im now pre-rooted GB, waiting for nitro to update the eclipse rom.
Problem is now, i dont have 3g. i tried *228 multiple times
Click to expand...
Click to collapse
Whenever I have had to sbf back to froyo, I have always done the *228 before I installed the GB update.
nitwit said:
Thats MR. Clown to you!
Click to expand...
Click to collapse
Opps.
lacross said:
I dont THINK i did, but hey, i wouldnt doubt it.
Anywho, just for an update, im now pre-rooted GB, waiting for nitro to update the eclipse rom.
Problem is now, i dont have 3g. i tried *228 multiple times
Click to expand...
Click to collapse
Reflash the sbf, activate the phone, reflash P3Droids update, wipe data/cache/dalvik from custom recovery, flash Eclipse v0.3/4 wichever now that he has a newer release.... I had to do this yesterday as I wiped when I didnt get a homescreen after flashing Eclipse.

[Q] error trying to install ICS Passion v13

Hi ,
when i try to flash my phone using the rom "ICS Passion v13"
i have these errors :
E:Failed to verifity whole-file signature
E:signature Verification Failed
Installation aborted
Download fresh, try again.
Sent from my SGH-T959 using XDA App
Redmartianducky said:
Download fresh, try again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I did not understand what you say ?
My first inclination would be a bad download, try a different dl location and try again.
Sent from my SGH-T959 using XDA App
Redmartianducky said:
My first inclination would be a bad download, try a different dl location and try again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i have tryed with another rom , same problem
Where in the process are you getting these errors? There are multiple steps to installing ICS that this could occur. What ROM are you running right now? If stock, is it 2.1 or 2.2? Do you have CWR installed? Is it installed with Update.zip or through ROM Manager? Did you flash CM7 before ICS?
Simply putting that you got this error is not enough information for us to diagnose and help.
Edit::: also please don't spam the other posts with "Good" or "Great to hear that" to get your post count up like was done in Themes and Apps section. There are many threads to that you can post in to get the count up legitimately.
Woodrube said:
Where in the process are you getting these errors? There are multiple steps to installing ICS that this could occur. What ROM are you running right now? If stock, is it 2.1 or 2.2? Do you have CWR installed? Is it installed with Update.zip or through ROM Manager? Did you flash CM7 before ICS?
Simply putting that you got this error is not enough information for us to diagnose and help.
Edit::: also please don't spam the other posts with "Good" or "Great to hear that" to get your post count up like was done in Themes and Apps section. There are many threads to that you can post in to get the count up legitimately.
Click to expand...
Click to collapse
hi ,
i have the stock rom (2.2) CWR is not installed , i have not Flash CM7 before ICS
That is the problem. Go to my guide in the General or in my sign and follow it.
it rooted? you have the right CWM rec on it? im not a pro but i know that might be it
You must install CyanogenMod 7 before install a ICS rom.
it's the best form if you dont wanna have problem with the bootloader and bricked your phone!!
I suggest you start here:
http://forum.xda-developers.com/showthread.php?t=849028
ascallop said:
I suggest you start here:
http://forum.xda-developers.com/showthread.php?t=849028
Click to expand...
Click to collapse
hi ,
i have use your link for installing ICS , i have do it .
but i have a problem :
when i click on any thing i have this : Unfortunatley , The process android.process.media has stopped ?
how i fix this ?
After installing it, did you let it settle for 20 minutes before using the phone?
If you did, try flashing again, or download the rom again.
Sent from my SGH-T959 using XDA App
I happen to me the first time I load the Passion 13. So I delete the passion zip file from where I will load it (download folder in my case), then redownload the passion 13 zip file and copy it to the download folder. It works for me.
Jacendb said:
After installing it, did you let it settle for 20 minutes before using the phone?
If you did, try flashing again, or download the rom again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
hi ,
i didn't wait
so i try to reflash .
paranoxxx said:
hi ,
i didn't wait
so i try to reflash .
Click to expand...
Click to collapse
this is what i did, when helping my friend boot it up,
you have to make sure your rooted
then install ClockWorkMod recovery onto the phone,
then install CM7 after it boots back to recovery
then wipe data and cache
then install ics passion wait for it to boot all the way back to recovery for the last time
install the clean up patch and the phone will work perfect
i had the same problem, thats what i had to do make sure it worked perfect
Jacendb said:
After installing it, did you let it settle for 20 minutes before using the phone?
If you did, try flashing again, or download the rom again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
what if you didn't let let it settle for 20 minutes? I didn't most of thing seems alright, except that the dial keys seem to be sticky if I hold it a hair too long, like when you try to do quick dial, the key will stay selected and you can't dial other numbers until it unstick.
I'm using Passion 13, not sure if I have kiss 2.2.
A question for everyone: can't Passion 13 or ICS for Vibrant in general let you assign phone number for quick dial? You have to use direct dial widget?
paranoxxx said:
when i click on any thing i have this : Unfortunatley , The process android.process.media has stopped ?
how i fix this ?
Click to expand...
Click to collapse
Usually a boot into recovery, fix permission and wipe cache and dalvik cache will clear this up. But sometimes it is just a bad download too.
Kaptinkrunk said:
this is what i did, when helping my friend boot it up,
you have to make sure your rooted
then install ClockWorkMod recovery onto the phone,
then install CM7 after it boots back to recovery
then wipe data and cache
then install ics passion wait for it to boot all the way back to recovery for the last time
install the clean up patch and the phone will work perfect
i had the same problem, thats what i had to do make sure it worked perfect
Click to expand...
Click to collapse
This is a Guide on putting ICS ROMs on your Vibrant that explains everything.
ciditin said:
what if you didn't let let it settle for 20 minutes?....
I'm using Passion 13, not sure if I have kiss 2.2.
Click to expand...
Click to collapse
It is always a good idea to let the phone go through a "settling" period after you flash it. There are RAM tweaks to finish, media scanning and a host of other things that need to be completed as you just installed a completely new operating system on your phone. Especially don't log into Market or Titanium and start restoring as this can cause problems long term. What is 20 mins compared to problems and hassles for the next few days/weeks.
If you don't know if you have Kiss 2.2 on your phone, then you don't have it b/c you have to flash it. See HERE

[Q] Reset to fully stock

So i purchased an atrix 4g off of eBay, and it has a few Root applications on it, but isn't actually rooted.
The android recovery mode is also broken, i get an android robot with the Attention symbol. Would post a link to one i found on the internet but i cannot since i am under 8 posts.
The phone was on 2.3.6 build # 4.5.141 when i received it. and i have done nothing to it so far.
So maybe someone applied OTA updates and killed the root or something, idk.
in the end the end i would like to root it with some ISC.
So is there anyway i can Reset everything to stock out of the box. Or to fix the problems with recovery?
Also for now it wont really be used as a phone, as i don't have a sim yet.
To cover the basics here let's make sure the phone isn't bootloader unlocked or rooted. To check bootloader, when you boot the phone, does the moto screen say "Unlocked" in top left hand corner of the screen? If not, it isn't. Then for root, check it with the app root checker basic or pro from market. Get back to the thread once you can answer those questions and then I will post something to help you with the getting ics.
Sent from my Atrix with XDA Premium
Both of those come up as a no So no unlocked boot loader and no root
Try this but you know the risks of messing with the phone right??? Read EVERYTHING before you do. Your phone says a different version of firmware than the thread but if you look back in the posts of the thread in the end, it will work. You can also read the Atrix thread stickies.
Edit.... having trouble posting link ... give me sec.
Edit 2....can't post from phone. Let me post it from my computer when I get to the computer in the morning.
Sent from my Atrix with XDA Premium
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
dfanz0r said:
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
Click to expand...
Click to collapse
Did you wipe before installing?
Sent from my MB860 running Jokersax's CM9
Yes i wiped
dfanz0r said:
Yes i wiped
Click to expand...
Click to collapse
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
dfanz0r said:
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Click to expand...
Click to collapse
Yup that was it.
Glad you found it.
Sent from my Atrix with XDA Premium
giqbal said:
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
Click to expand...
Click to collapse
This doesn't work either same result
Does anyone else have any ideas?
dfanz0r said:
Does anyone else have any ideas?
Click to expand...
Click to collapse
Have you flashed a different ROM for the time being to at least have a working phone? Like a blur or cm7 ROM?
Sent from my Atrix with XDA Premium
Thats is what i was going to try next, i havent got to it today.
Are you flashing plugged in? Try flashing the rom without having your phone plugged in.
Also, if you're at the M logo screen, I suggest waiting it out for quite a while. Be patient. I used to think when I flashed roms that I was stuck at M logo, but I just wasn't waiting long enough, especially coming from a full wipe.
Otherwise, try doing a battery pull and then putting it back in and booting it up.
You can also try using Nottachtrix with the installer? I've heard that fixes a lot of people's problems that are getting stuck at logo screen.
well right now it seems that the battery is dead and wont charge....
So im not sure what im gonna do about that
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
dfanz0r said:
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
Click to expand...
Click to collapse
Wipe cache partition, wipe data, wipe delvik. Install Rom (cm7). Reboot recovery. Install gapps. Reboot now. If it's not working perhaps you cwm is outdated?
Sent from my MB860 using xda premium
NottachTrix works fine so far, my battery just needed to charge some.

[Q] "Process System Isn't responding" message on all jb roms

"Process system isnt responding. Do you want to close it?
wait report ok
I get this message ALOT on all the JB roms out there now; it happens after a reboot/restart, and if I click ok, things seem to work normally after a few seconds...
Anyone else seeing this alot? Anyone figure out a way to stop it?
thanks!
Wipe data, cache and dalvik.
Sent from my SAMSUNG-SGH-I717 using xda premium
johnrippa said:
Wipe data, cache and dalvik.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
wiping data will mean you have to reinstall your rom
I've wiped cache/dalvik numerous times, and it still happens
and, when I flash new rom, i factory reset, wipe data/cache/dalvik, and run darkstar system wipe, and it still happens
First try fixing permissions from within your recovery.
_____________________
Black Star VIII
ZPaul2Fresh8 said:
First try fixing permissions from within your recovery.
_____________________
Black Star VIII
Click to expand...
Click to collapse
did that many many times, and it doesnt help
wase4711 said:
did that many many times, and it doesnt help
Click to expand...
Click to collapse
Did you restore apps from titanium backup? If so that may be it.
_____________________
Black Star VIII
Me too
Hello,
this problem happens to me too for a few day now.
System not responding at every boot, but everything seems normal.
when i flash a new nightlie and it reboots, i do not get this message. But after i reboot again it reapears.
after a search i found this, there: http://www.modaco.com/topic/359832-devrom152-cyanogenmod-101-android-422/
its for zte blade
[DEV][ROM][15.2.] CyanogenMod 10.1 (Android 4.2.2)
"11​.2.2013 changelog:
reverted commits (1,2) that caused 'Process system isn't responding' issue on every reboot"
(the comits have something to do with the new FM stuff in the rom)
Maybe someone want to have a look at it?
I can not post in the official CM10.1-galaxysmtd thread yet.
Greeting, Strainhunter
Problem gone (i hope)
strainhunter said:
Hello,
this problem happens to me too for a few day now.
System not responding at every boot, but everything seems normal.
when i flash a new nightlie and it reboots, i do not get this message. But after i reboot again it reapears.
after a search i found this, there: http://www.modaco.com/topic/359832-devrom152-cyanogenmod-101-android-422/
its for zte blade
[DEV][ROM][15.2.] CyanogenMod 10.1 (Android 4.2.2)
"11​.2.2013 changelog:
reverted commits (1,2) that caused 'Process system isn't responding' issue on every reboot"
(the comits have something to do with the new FM stuff in the rom)
Maybe someone want to have a look at it?
I can not post in the official CM10.1-galaxysmtd thread yet.
Greeting, Strainhunter
Click to expand...
Click to collapse
Hello Again,
The problem is gone for me i found out that it has something to do either with the Theme i was using, or/and the Launcher. Because i first switched my Launcher (Nova Launcher) to the Stock one (Trebuchet) (merely just because i did not know how i should fix that problem) then at the after the first reboot with stock launcher the problem was gone, but came back after i rebooted again. So i changed my Theme (JellyBeanExtreme) and the problem did not appear again "knockin´3x on wood^^"
Maybe this can help someone who had or will have this problem.
Greetings,
Strainhunter
wase4711 said:
wiping data will mean you have to reinstall your rom
I've wiped cache/dalvik numerous times, and it still happens
and, when I flash new rom, i factory reset, wipe data/cache/dalvik, and run darkstar system wipe, and it still happens
Click to expand...
Click to collapse
Eh, nope. That would be if you wiped your system. Wiping data will take away all your apps and customizations, but will leave the ROM intact (remember: "ROM" = "Read-Only Memory").
IMO if you want to start anew as a first level troubleshoot, it's much easier to wipe cache/dalvik/SYSTEM, then reflash your ROM and GAPPS. This has solved my problems about 90% of the time, especially when I've installed a mod my phone doesn't like, or done something stupid while messing around in /system/.
CPA Poke said:
Eh, nope. That would be if you wiped your system. Wiping data will take away all your apps and customizations, but will leave the ROM intact (remember: "ROM" = "Read-Only Memory").
IMO if you want to start anew as a first level troubleshoot, it's much easier to wipe cache/dalvik/SYSTEM, then reflash your ROM and GAPPS. This has solved my problems about 90% of the time, especially when I've installed a mod my phone doesn't like, or done something stupid while messing around in /system/.
Click to expand...
Click to collapse
Does that leave your apps and data in place? Never thought of that
Sent from my SGH-I717 using XDA Premium HD app
did u install the walkman app for the note?
I had the same problem. I uninstalled Nova launcher but it was still giving me the same error.
I uninstalled Cobalt theme for CM 10 and that fixed it. Hopefully it gets updated to 10.1, I like the theme.
Sent from my SAMSUNG-SGH-I717 using xda premium
briand.mooreg said:
I had the same problem. I uninstalled Nova launcher but it was still giving me the same error.
I uninstalled Cobalt theme for CM 10 and that fixed it. Hopefully it gets updated to 10.1, I like the theme.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
i was also getting this error using Jamies 10.1 rom.....found out it went away when i stoppped trying to use a theme. im using the TouchWiz launcher and no theme and no more error.
so if any one is using a theme and getting this error stop using a theme and see if that helps....
jrea77 said:
i was also getting this error using Jamies 10.1 rom.....found out it went away when i stoppped trying to use a theme. im using the TouchWiz launcher and no theme and no more error.
so if any one is using a theme and getting this error stop using a theme and see if that helps....
Click to expand...
Click to collapse
It is absolutely the themes that do this. However, from what I read up on it there is literally nothing actually going wrong with the device except for a teeny couple of extra seconds on boot up (which can supposedly be rectified by hitting "Wait" instead of "Stop" or whatever it says.
Actually, I even remember them saying that the mere fact that you're getting the error message means that it's installed correctly.. Something about the stock framework not liking being modified.
CPA Poke said:
It is absolutely the themes that do this. However, from what I read up on it there is literally nothing actually going wrong with the device except for a teeny couple of extra seconds on boot up (which can supposedly be rectified by hitting "Wait" instead of "Stop" or whatever it says.
Actually, I even remember them saying that the mere fact that you're getting the error message means that it's installed correctly.. Something about the stock framework not liking being modified.
Click to expand...
Click to collapse
ya...i noticed nothing was really wrong while getting the error, it just bug me that i was getting that little pop up window. i would hit "wait" or "cancel" and it didnt seem to make a difference, it would go away and that was it. once in a while it would pop back up when getting a text or call, before i could answer the call i had to click it to make it go away to be able to answer. so i decided not to use the theme and not worry about that error.....so would it be any theme or just some themes? maybe ill try other themes and see what happens.....

Categories

Resources