Hi ,
when i try to flash my phone using the rom "ICS Passion v13"
i have these errors :
E:Failed to verifity whole-file signature
E:signature Verification Failed
Installation aborted
Download fresh, try again.
Sent from my SGH-T959 using XDA App
Redmartianducky said:
Download fresh, try again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I did not understand what you say ?
My first inclination would be a bad download, try a different dl location and try again.
Sent from my SGH-T959 using XDA App
Redmartianducky said:
My first inclination would be a bad download, try a different dl location and try again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i have tryed with another rom , same problem
Where in the process are you getting these errors? There are multiple steps to installing ICS that this could occur. What ROM are you running right now? If stock, is it 2.1 or 2.2? Do you have CWR installed? Is it installed with Update.zip or through ROM Manager? Did you flash CM7 before ICS?
Simply putting that you got this error is not enough information for us to diagnose and help.
Edit::: also please don't spam the other posts with "Good" or "Great to hear that" to get your post count up like was done in Themes and Apps section. There are many threads to that you can post in to get the count up legitimately.
Woodrube said:
Where in the process are you getting these errors? There are multiple steps to installing ICS that this could occur. What ROM are you running right now? If stock, is it 2.1 or 2.2? Do you have CWR installed? Is it installed with Update.zip or through ROM Manager? Did you flash CM7 before ICS?
Simply putting that you got this error is not enough information for us to diagnose and help.
Edit::: also please don't spam the other posts with "Good" or "Great to hear that" to get your post count up like was done in Themes and Apps section. There are many threads to that you can post in to get the count up legitimately.
Click to expand...
Click to collapse
hi ,
i have the stock rom (2.2) CWR is not installed , i have not Flash CM7 before ICS
That is the problem. Go to my guide in the General or in my sign and follow it.
it rooted? you have the right CWM rec on it? im not a pro but i know that might be it
You must install CyanogenMod 7 before install a ICS rom.
it's the best form if you dont wanna have problem with the bootloader and bricked your phone!!
I suggest you start here:
http://forum.xda-developers.com/showthread.php?t=849028
ascallop said:
I suggest you start here:
http://forum.xda-developers.com/showthread.php?t=849028
Click to expand...
Click to collapse
hi ,
i have use your link for installing ICS , i have do it .
but i have a problem :
when i click on any thing i have this : Unfortunatley , The process android.process.media has stopped ?
how i fix this ?
After installing it, did you let it settle for 20 minutes before using the phone?
If you did, try flashing again, or download the rom again.
Sent from my SGH-T959 using XDA App
I happen to me the first time I load the Passion 13. So I delete the passion zip file from where I will load it (download folder in my case), then redownload the passion 13 zip file and copy it to the download folder. It works for me.
Jacendb said:
After installing it, did you let it settle for 20 minutes before using the phone?
If you did, try flashing again, or download the rom again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
hi ,
i didn't wait
so i try to reflash .
paranoxxx said:
hi ,
i didn't wait
so i try to reflash .
Click to expand...
Click to collapse
this is what i did, when helping my friend boot it up,
you have to make sure your rooted
then install ClockWorkMod recovery onto the phone,
then install CM7 after it boots back to recovery
then wipe data and cache
then install ics passion wait for it to boot all the way back to recovery for the last time
install the clean up patch and the phone will work perfect
i had the same problem, thats what i had to do make sure it worked perfect
Jacendb said:
After installing it, did you let it settle for 20 minutes before using the phone?
If you did, try flashing again, or download the rom again.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
what if you didn't let let it settle for 20 minutes? I didn't most of thing seems alright, except that the dial keys seem to be sticky if I hold it a hair too long, like when you try to do quick dial, the key will stay selected and you can't dial other numbers until it unstick.
I'm using Passion 13, not sure if I have kiss 2.2.
A question for everyone: can't Passion 13 or ICS for Vibrant in general let you assign phone number for quick dial? You have to use direct dial widget?
paranoxxx said:
when i click on any thing i have this : Unfortunatley , The process android.process.media has stopped ?
how i fix this ?
Click to expand...
Click to collapse
Usually a boot into recovery, fix permission and wipe cache and dalvik cache will clear this up. But sometimes it is just a bad download too.
Kaptinkrunk said:
this is what i did, when helping my friend boot it up,
you have to make sure your rooted
then install ClockWorkMod recovery onto the phone,
then install CM7 after it boots back to recovery
then wipe data and cache
then install ics passion wait for it to boot all the way back to recovery for the last time
install the clean up patch and the phone will work perfect
i had the same problem, thats what i had to do make sure it worked perfect
Click to expand...
Click to collapse
This is a Guide on putting ICS ROMs on your Vibrant that explains everything.
ciditin said:
what if you didn't let let it settle for 20 minutes?....
I'm using Passion 13, not sure if I have kiss 2.2.
Click to expand...
Click to collapse
It is always a good idea to let the phone go through a "settling" period after you flash it. There are RAM tweaks to finish, media scanning and a host of other things that need to be completed as you just installed a completely new operating system on your phone. Especially don't log into Market or Titanium and start restoring as this can cause problems long term. What is 20 mins compared to problems and hassles for the next few days/weeks.
If you don't know if you have Kiss 2.2 on your phone, then you don't have it b/c you have to flash it. See HERE
Related
I've been trying to get this on my phone since yesterday..i probably followed the directions over 10 times..and no matter what i do it just hangs at vibrant screen. i tried installing cm7 to see if i was doing everything correctly, it worked..then i tried with miui. big fail..i can't figure out what is going on
JinNguice said:
I've been trying to get this on my phone since yesterday..i probably followed the directions over 10 times..and no matter what i do it just hangs at vibrant screen. i tried installing cm7 to see if i was doing everything correctly, it worked..then i tried with miui. big fail..i can't figure out what is going on
Click to expand...
Click to collapse
Maybe it's a bad download. Try to redownload then reinstall it.
this would be the first time in life i'd have ever had a bad download..i'll try it..thank you
didnt work..lol maybe my vibrant doesn't like miui..sucks for me
Your downloading the rom, not the update right?
since its my first time flashing it..wouldn't MIUI 1.4.1 be the rom or is that the update? or is there somewhere i'd have to start off with
Sounds like whatever package you flashed doesn't have a kernel.
Segnaro said:
Sounds like whatever package you flashed doesn't have a kernel.
Click to expand...
Click to collapse
I've been at this all day..would you be so kind to point me in the right direction..
Go to mounts and storage and go to wipe system data and cache install rom then wipe factory reset
Sent from my SGH-T959 using XDA App
I know I followed directions to the T because I'm running cm7 and its my first time posting because I just couldn't figure this one out..grrr
Sent from my SGH-T959 using XDA App
JinNguice said:
I know I followed directions to the T because I'm running cm7 and its my first time posting because I just couldn't figure this one out..grrr
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Download miui_T959_1.4.1_2.3.zip
Go into clockwork. Format /system, /cache, /data . Flash the zip.
Segnaro said:
Download miui_T959_1.4.1_2.3.zip
Go into clockwork. Format /system, /cache, /data . Flash the zip.
Click to expand...
Click to collapse
done and currently hanging.. i'm confused
okay it works!!! which is weird because i went back to odin the cm7 kernal and i tried to go into recovery and it rebooted... weird method but i'll run with it
Yesterday my Vibrant crashed and now I can't start messaging. When I try to, the screen goes black and after a few seconds, I get the message "the application Messaging (process com.Android.Mms) has stopped unexpectedly. Please try again", and then closes very quickly, before I have the chance to tap "force close". Any solution?
OmnipotentPilot said:
Yesterday my Vibrant crashed and now I can't start messaging. When I try to, the screen goes black and after a few seconds, I get the message "the application Messaging (process com.Android.Mms) has stopped unexpectedly. Please try again", and then closes very quickly, before I have the chance to tap "force close". Any solution?
Click to expand...
Click to collapse
didnt restore messages from a different version did you, like 2.2.1 to 2.2 or 2.2 to 2.3
i did that coming from 2.2.1 and restored on 2.2 and my messaging force closed, if it is that reflashing would fix it
just a suggestion, better to have more than less
Yeah, thanks! However, I'm still working on getting clockworkmod to work, so I haven't flashed any roms. Yet.
So in other words I still have no idea what's going on haha
Sent from my SGH-T959 using XDA App
OmnipotentPilot said:
Yeah, thanks! However, I'm still working on getting clockworkmod to work, so I haven't flashed any roms. Yet.
So in other words I still have no idea what's going on haha
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
use rom mansger to flash it then reinstall packages twice in the stock blue recovery if you havent already
if you can't get CWR to work... then download a nightly, lastest or old doesn't matter i don't think message app has changed at all...
so anyways
download it.
extract apk from system/apps
and then replace on your phone..
just wondering... why are you still using stock messagning app? everyone i know has moved on to go sms pro or somthing else.
edit: oops why did i just assume u were using CM7 lol, anyways just replace the nightly up there with your rom, and do the same thing.
What do you mean, "the nightly"? (the nightly build? Of what?)
Also, I got my phone three days ago, so I still use stock messaging. If there's a better alternative, I'd love to get it. What do you guys suggest?
Sent from my SGH-T959 using XDA App
OmnipotentPilot said:
What do you mean, "the nightly"? (the nightly build? Of what?)
Also, I got my phone three days ago, so I still use stock messaging. If there's a better alternative, I'd love to get it. What do you guys suggest?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
You can try Go SMS Pro from the market - it's really good.
Are you on the Samsung ROM? I thought you were on some other one, ignore the nightly parts...
have you done anything with your phone like flash other ROMs?
If not, there's an app called Bloater, if you search a bit on the themes / apps section you can find it, and then get the messaging app, im pretty sure it has it in there.
I'll try sms pro. I haven't used any other roms yet. I'm on the Samsung Rom. I've tried to flash clockworkmod, but it didn't work. I'll try bloated...
Sent from my SGH-T959 using XDA App
Strange... I tried go sms pro and handcent sms, and they both crashed in much the same way as stock messaging. I also got similar errors.
Sent from my SGH-T959 using XDA App
OmnipotentPilot said:
Strange... I tried go sms pro and handcent sms, and they both crashed in much the same way as stock messaging. I also got similar errors.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
They both crashed? Same errors with all of them?
Well, now we know that its YOUR issue, but I'll try and help.
First of all, the stock Samsung ROM is very buggy, and will become laggy after a week or two, maybe a month.
So i suggest you switch to a 2.2, or a 2.3 rom.
We do not have OFFICIAL 2.3 from samsung so we are relying on Cyanogen, a team that makes AOSP (free of all touchwiz) ROMS called Cyanogen Mod, or CM7 as in version 7.
I'll get you started off by teaching you how to use ODIN. Odin is important in the world of flashing. ODIN will get your phone back from soft bricks, and sometimes, rarely, hard bricks- MAYBE.
http://forum.xda-developers.com/showthread.php?t=771111
that thread has most of the stuff you will need.
ignore the ROMS section and downwards, the thread hasn't been updated in a while...
Go into the Vibrant Dev. section and look at some ROMS that you like.
Gingerbread (2.3) roms do not have perfect battery life right now, but its getting to the point where its just as good as froyo.
You are on 2.1, very outdated, and since its touchwiz, it will get sooooooooooo laggy.
Root yourself with Superonelickroot program, and then get app ROM MANAGER and flash yourself a clockwork recovery, put a ROM on your phone, and then install.
First decide which ROM you want, because if it's a 2.2, it's different than 2.3.
Thats not the only thread, but I can't find the exact threads to help you out with right here...
First off, thank you so much for all that information. My phone is already rooted. I can't get clockworkmod to work, but I will try odin. CM7 was my Rom of choice in the first place, but before I'd flash it I'd like to get clockworkmod working so I can do a nandroid backup. While your here, do you know of any battery efficient roms that I can flash for when I'm travelling and such?
Sent from my SGH-T959 using XDA App
OmnipotentPilot said:
First off, thank you so much for all that information. My phone is already rooted. I can't get clockworkmod to work, but I will try odin. CM7 was my Rom of choice in the first place, but before I'd flash it I'd like to get clockworkmod working so I can do a nandroid backup. While your here, do you know of any battery efficient roms that I can flash for when I'm travelling and such?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Battery efficent... hmm
If you're not in a hurry, I do suggest you try out CM7 WITH Glitch kernel, without it cm7 has bad battery, but i just tried it and its giving me pretty good.
If you travel frequently, Maybe Froyo 2.2 is best for you.
Now about your clockwork issue, whats the problem? any errors?
Get Rom Manager app from market
grant root access if it ever asks you.
top choice select it and then flash Vibrant CWR, BUT- AND BUT if you're going to try CM7 as I said, flash the Vibrant (MTD) their both there for choice.
It will download and flash by it self.
Now I hope you know how to get into recovery mode for now, because later on in every rom, theres a option you can just choose to get into recovery.
Anyways if you don't...
Hold up and down volume, and power button for about 5 seconds until phone turns on, and then let go, wait a few seconds and a recovery should pop up
press -REINSTALL PACKAGES-
this will replace normal recovery with the clcokwork
then after pressing reinstall packages, it will reboot back into recovery again, same screen, press reinstall packages again, now it wont reboot, but will go into a deeper version of recovery CLOCKWORK RECOVERY.
there you go, now thats what it is.
Now if you will flash CM7, go wipe the cache
and then ADVANCED > wipe dalvik cache
now install zip
install zip again or choose or something
and then find your rom and flash.
there you go.
After flashing a rom, let it sit for 10 minutes, it usually lets the ROM calm down and stop setting up and it works great.
You should let me know which rom you pick, if you want terrific battery, then its froyo for SURE.
I havent been on froyo in a while, but when i did, Trigger was my absolute favorite, if you can't choose, make a thread.
Wow havent typed that much in a while.
haha
Ok, i tried to install clockwork mod and I got the following error
"E:failed to verify whole-file signature
E:signature verification failed
Installation abored"
However, i found someone with a guide on how to use Odin. So I'm probably just going to use that, unless you know of a way to fix ClockworkMod.
Thanks again!
EDIT: Fixed the problem! I restored to stock firmware with odin, as i was getting a lot of problems. I'm now running Cyanogenmod 7.
OmnipotentPilot said:
Ok, i tried to install clockwork mod and I got the following error
"E:failed to verify whole-file signature
E:signature verification failed
Installation abored"
However, i found someone with a guide on how to use Odin. So I'm probably just going to use that, unless you know of a way to fix ClockworkMod.
Thanks again!
Click to expand...
Click to collapse
are you on 2.2? because the stock 2.2 that Samsung gave was protected so you couldn't do the clockwork etc.
Yep, use the ODIN thread you found and odin back to 2.1, root using superoneclickroot, and then do what I said and then you can flash clockwork.
Hey, I've had my Vibrant since the phone launched and have been using ODIN since that became a thing so I'm no noob to the whole process but today, I went back to stock and was not able to download CWM from the market like I usually do. "No problem, I'll just grab the .apk," I said. So I got the .apk from the official rom manager website and my vibrant refuses to install it. Any ideas why this is happening?
You have to be on 2.2 to download rom manager, dont ask me why.
Sugartibbs said:
You have to be on 2.2 to download rom manager, dont ask me why.
Click to expand...
Click to collapse
That's frustrating. I've never had a problem with this before and trying to run the .apk prompts "Parse Error: There is a problem parsing the package"
Go to the noob guide and use the update.zip method to install cwr
Sent from my SGH-T959 using XDA App
bfranklin1986 said:
Go to the noob guide and use the update.zip method to install cwr
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
You know what? When I get to my PC in the morning, I am going to put that in my signature. Seems like a daily question. I think you and I have answered it more times that I'd like to believe.
For sure, I havent used odin in months,really only need it if your in the weeds. Very cool alans full wipe in the dev. section is all you really need to do for a new flash. My one year with rom manager is coming up and I dont really need it anymore.
Can also try going to 4shared and finding an older version of Rom Manager
Sugartibbs said:
For sure, I havent used odin in months,really only need it if your in the weeds. Very cool alans full wipe in the dev. section is all you really need to do for a new flash. My one year with rom manager is coming up and I dont really need it anymore.
Click to expand...
Click to collapse
So I can use "Very cool alan's full wipe" and go from ANY rom to ANY other rom without using a computer or odin? As long as rom is already on sd card and everything goes as it should?
Unless of course something really goes haywire. Then odin is the fail safe?
Sent from the Re-Melt
hi all,
i was trying to root my phone (samsung i717 with ICS leaked version).
I downloaded the usb drivers,
Got the phone into download mode,
Connected phone to PC with usb
phone was recognised and i was able to see the SAMSUNG USB Device in device manager
opened ODIN, selected the pda.tar file and clicked on start..
Everything was going fine i got all the success messages in ODIN, then my phone rebooted and then stuck on the SAMSUNG screen.
on my PC i see USB drivers trying to be installed and fails.. i dont understand where to go from here.. i tried several time, but keep getting stuck at this point
Please please let me know how i can get my phone back.. i am a newbie.. would really appreciate a link or something that has step by step instructions so i dont mess it up further..
Thanks all..
Can u get into download mode?
mejori said:
Can u get into download mode?
Click to expand...
Click to collapse
yes i am able to get into download mode..
indgirl6 said:
yes i am able to get into download mode..
Click to expand...
Click to collapse
i just tried doing a factory reset as well and even that did not work
please help..
indgirl6 said:
i just tried doing a factory reset as well and even that did not work
please help..
Click to expand...
Click to collapse
Use odin and get att recovery b4 tar file flash it and all is well
sent from team perfections ics rom
Flash stock rom from download mode...
Sent from my SAMSUNG-SGH-I717 using xda premium
hi, thanks for your responses.
but as i said i am new to all this, and although i have a basic idea about what you are asking me to do, i would really really appreciate it if some one can send me a link or step by step instruction on what i have to do..
i am very familliar with getting my phone in download mode. And also have odin on my PC.. but i am guessing i have to use a different Tar file to flash stock (right?)
if my above guess is right, i think i will be stuck with the same issue where i select the tar file and click on "start'" in odin and everthing goes well until the phone is rebooted and after that for some reason my PC cant find the usb drives and doesnot recognise my phone..
sorry if i am asking silly questions,. but this is my first android phone (smart phone actually..) and my first attempt at upgrade / rooting
hi,
MY PHONE IS BACK!!!
i followed all the instruction to the T in the following link:
http://rootgalaxynote.com/galaxy-no...brick-att-galaxy-note-sgh-i717-android-2-3-6/
Thanks all for your time and suggestions..
Now that i have lost all my data i guess i can do some more "testing"
Congratulations and happy testing!!!
thanks..
i flashed stock rom, then rooted it (this time i was sucessful)
then installed CWM touch, made a backup,
Installed titanium backup, made backup again..
next step is to install the "OnlyOne HYFR B4" rom
Then to try and reset the flash counter
hope i am sucessful at this..
any other ROM recomendations?
glad to see you got it working..happy flashing homey!!!
Sounds like you didn't wait until your system files and dalvik cache was built b4 you jumped the fun and freaked out. Next time realize that after a ROM flash it could take up to 10 minutes to build the system and all you'll see is the pulsating Samsung logo.
Sent from my SAMSUNG-SGH-I717 using XDA
tyler79durdan said:
Sounds like you didn't wait until your system files and dalvik cache was built b4 you jumped the fun and freaked out. Next time realize that after a ROM flash it could take up to 10 minutes to build the system and all you'll see is the pulsating Samsung logo.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Yes, you are right.. that is probably what i did.. thanks for letting me know.. as i plan to flash ICS rom tonight, will make sure that i am relaxed and patient
now that i have all the backups and know how to bring it back to stock.. i guess i would be more relaxed .
If you're not set on ICS I personally run Saurom with Dag's kernel. I don't care what anyone says....an OC'd kernel on GB performs better than any ICS ROM currently available. Not to take anything away from the current ICS roms...
Sent from my SAMSUNG-SGH-I717 using xda premium
fmllc said:
If you're not set on ICS I personally run Saurom with Dag's kernel. I don't care what anyone says....an OC'd kernel on GB performs better than any ICS ROM currently available. Not to take anything away from the current ICS roms...
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Thanks for your suggestion.. I will try that out as well.. since i have nothting to loose.. (and i have the zest to try out new things after my initial success ) i will try both and keep the one i like better..
tyler79durdan said:
Sounds like you didn't wait until your system files and dalvik cache was built b4 you jumped the fun and freaked out. Next time realize that after a ROM flash it could take up to 10 minutes to build the system and all you'll see is the pulsating Samsung logo.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Yep it takes a while. I got nervous also the first time cuz it didn't take that long with my skyrocket or infuse. But be patient my child.
Sent from my SAMSUNG-SGH-I717 using xda premium
Regarding dragonzkiller's thread http://forum.xda-developers.com/showthread.php?t=1912280 on [ROM][ALPHA][JB]CyanogenMod 10 Alpha 3 for the Droid X2. I've rooted two devices, the OG Droid and my X2 so I'm not unfamiliar with the process but some of the items I need to get CM 10 on my X2 I'm not sure where to find. In the article it's said I need the following:
-Install the BSR (patched if on an AOSP based ROM, unpatched if on BLUR)
-Reboot into the BSR
-NANDROID
Where can I find BSR and NANDROID? I have Rom Manager and Titanium Backup Pro on my X2 currently. Rom Manager never reboots into recovery for me for some reason and TB Pro does but I don't see an option to select NANDROID.
Any help would be really appreciated! I'm tried of running 2.3.5 all this time.
Dont use ROM manager for that kind of stuff. Best not to use it at all with the Droid X2 actually. The BSR IS the recovery for the X2. It can be found in the CM7 thread. And a nandroid is just a backup of your ROM that you make yourself within the recovery. Its not a file provided. Its a good idea to backup your ROM before installing stuff. That way you can restore it if things go wrong.
jsgraphicart said:
Dont use ROM manager for that kind of stuff. Best not to use it at all with the Droid X2 actually. The BSR IS the recovery for the X2. It can be found in the CM7 thread. And a nandroid is just a backup of your ROM that you make yourself within the recovery. Its not a file provided. Its a good idea to backup your ROM before installing stuff. That way you can restore it if things go wrong.
Click to expand...
Click to collapse
Thank you for the reply jsgraphicart.
Good to know on Rom Manager, never has worked right.
I'll go look in the CM7 thread for the BSR, now that you say what it is I might actually have that somewhere after reading when it initially became available.
So if TB Pro can get me into recovery what else do so I can do a nandroid backup? I don't see an option to do that?
poguec said:
Thank you for the reply jsgraphicart.
Good to know on Rom Manager, never has worked right.
I'll go look in the CM7 thread for the BSR, now that you say what it is I might actually have that somewhere after reading when it initially became available.
So if TB Pro can get me into recovery what else do so I can do a nandroid backup? I don't see an option to do that?
Click to expand...
Click to collapse
You are probably booting into the stock recovery, which doesnt have that option. You need to install the custom recovery (BSR) to do that.
jsgraphicart said:
You are probably booting into the stock recovery, which doesnt have that option. You need to install the custom recovery (BSR) to do that.
Click to expand...
Click to collapse
And I get the BSR from the CM 7 thread correct? Once I have that file how do I get that installed and does it wipe my phone before I get a chance to save it as is?
Thank you for your patience and help by the way!
poguec said:
And I get the BSR from the CM 7 thread correct? Once I have that file how do I get that installed and does it wipe my phone before I get a chance to save it as is?
Thank you for your patience and help by the way!
Click to expand...
Click to collapse
Yes, get it from the CM7 thread. Just install it like you would install an app from your SD card. Its the same thing. Use a file browser app and navigate to the apk file then tap it. It will walk you through the rest. Once you have it installed you will have the app in your app drawer called system recovery or something like that. Open it and follow the directions to get into BSR. You have to have your phone plugged into an outlet though. Even though it says plug your phone into nothing. If your are on CM10, you need a file called hijack.zip and will have to place that in a certain location before using BSR. Check out the CM10 thread. The last few posts were talking about that. And the file was posted on the last page. I hope I'm not forgetting anything.
jsgraphicart said:
Yes, get it from the CM7 thread. Just install it like you would install an app from your SD card. Its the same thing. Use a file browser app and navigate to the apk file then tap it. It will walk you through the rest. Once you have it installed you will have the app in your app drawer called system recovery or something like that. Open it and follow the directions to get into BSR. You have to have your phone plugged into an outlet though. Even though it says plug your phone into nothing. If your are on CM10, you need a file called hijack.zip and will have to place that in a certain location before using BSR. Check out the CM10 thread. The last few posts were talking about that. And the file was posted on the last page. I hope I'm not forgetting anything.
Click to expand...
Click to collapse
This is great information, thank you!
poguec said:
This is great information, thank you!
Click to expand...
Click to collapse
I'm sorry to ask more questions but I'm finally ready to update and I'm getting an error. First thing I'm wondering is this is one of those things where I have to be on 2.3.4? I'm on 2.3.5.
The error is:
assert failed: run_program("/tmp/check_kernel") == 0
E:Error in /sdcard/cm10.zip
(Status 7)
Are you running CM on your X2? Why is there so little available for the X2?
poguec said:
I'm sorry to ask more questions but I'm finally ready to update and I'm getting an error. First thing I'm wondering is this is one of those things where I have to be on 2.3.4? I'm on 2.3.5.
The error is:
assert failed: run_program("/tmp/check_kernel") == 0
E:Error in /sdcard/cm10.zip
(Status 7)
Are you running CM on your X2? Why is there so little available for the X2?
Click to expand...
Click to collapse
yes it needs to be 2.3.4 , not 2.3.5 you will have to SBF
Lorenzo VonMatterhorn said:
yes it needs to be 2.3.4 , not 2.3.5 you will have to SBF
Click to expand...
Click to collapse
I had a feeling you'd say that. Well, know what I need to do now.
Thanks again for all the assistance on this! I should be on my way now.
poguec said:
I had a feeling you'd say that. Well, know what I need to do now.Thanks again for all the assistance on this!I should be on my way now.
Click to expand...
Click to collapse
Well I'm here again asking/begging for assistance. I've been trying all afternoon to get back to 2.3.4 without no luck. Each time I use the CW7 recovery to apply the older ROM it just sits on installing. I'm at a loss, I've even factory reset the thing.
poguec said:
Well I'm here again asking/begging for assistance. I've been trying all afternoon to get back to 2.3.4 without no luck. Each time I use the CW7 recovery to apply the older ROM it just sits on installing.I'm at a loss, I've even factory reset the thing.
Click to expand...
Click to collapse
Got to 2.3.4 finally but trying CM10 or the new AOKP build 6 I keep getting messages about signature verification failed. I feel like I'm so close! If I could just get past this latest error.
you flash SBFs with rsd lite
or use ezSBF
if on stock 2.3.4, install bsr/system recovery not cm7 bsr
once rom is installed use cm7 bsr
watch tomsgt's videos
Sent from my XT894 using xda premium
I should have wrote back last night but it got late, I think I ended up at the same result as you posted. That's again, I think I finally got a handle on this.
Hey there me again. It's there an equivalent of the CM7 bsr for CM10?
use cm7 bsr
Sent from my XT894 using xda premium
I tried that, never seems to boot into it. I get it installed and says it was successful but when I hit boot into recovery it just goes to the Motorola screen and freezes.
normally even using reg bar on stock
I connect charger after phone has shut down
Sent from my XT894 using xda premium
Wish I could say I wasn't plugging in as well but I am. So basically it should be working for me but it's not.
http://forum.xda-developers.com/showpost.php?p=37433321&postcount=1519
Sent from my XT894 using xda premium