[Q] Please Help - Galaxy S II Q&A, Help & Troubleshooting

Respected Everybody,
I have a big problem. I just cann`t get out of "ODIN MODE " . After Flashing a custom rom (ICS AOKP 4.0.4), but i failed now when i boot up nothing comes up after the samsung logo. my phone is rooted , had ICS 4.0.4 on it and is an samsung galaxy s2 I9100.
Now it Says :
ODIN MODE (in red)
PRODUCT NAME : GT i9100
CUSTOM BINARY DOWNLOAD : YES (1 counts)
current binary : custom
" Downloading .............
Do not turn off target !! "
It is recognized by my PC via Odin ( <ID:0/004>Added!!).
Please help to get out of this problem. Anxiously waiting for help. Please Guide me.

As per your description, possible solutions as follows.
1. Boot your phone in recovery mode (Power+Home+Vol Up). Wipe Data/Factory Reset. Wipe Cache. Reboot
2. In download mode, flash stock ROM using different USB port with no internet connected.
This might solve your program.
Hit thanks if it helped you.

Please Help
mihirjoe said:
As per your description, possible solutions as follows.
1. Boot your phone in recovery mode (Power+Home+Vol Up). Wipe Data/Factory Reset. Wipe Cache. Reboot
2. In download mode, flash stock ROM using different USB port with no internet connected.
This might solve your program.
Hit thanks if it helped you.
Click to expand...
Click to collapse
Thanks Sir.
But I just cann`t go into recovery mode. Whenever I try to do so , nothing happen. It hangs on Samsung logo again.
I only access Odin Mode (Power+Home+ Vol Down). What should i do. Please Help me.

Micheal86 said:
Thanks Sir.
But I just cann`t go into recovery mode. Whenever I try to do so , nothing happen. It hangs on Samsung logo again.
I only access Odin Mode (Power+Home+ Vol Down). What should i do. Please Help me.
Click to expand...
Click to collapse
Your phone has entered a forced download mode.
You might have to flash a stock firmware to boot your phone properly
Sent from my GT-I9100 using Tapatalk 2

Please Help
Jokesy said:
Your phone has entered a forced download mode.
You might have to flash a stock firmware to boot your phone properly
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Sir,
I follow you. Every thing was fine (according to ODIN Message). But now it hangs on samsung bootanimation logo screen. Every time I try It remains the same. Now please tell me what should I do ? Please Guide me.

Micheal86 said:
Thanks Sir,
I follow you. Every thing was fine (according to ODIN Message). But now it hangs on samsung bootanimation logo screen. Every time I try It remains the same. Now please tell me what should I do ? Please Guide me.
Click to expand...
Click to collapse
Now boot to recovery mode and perform a Factory Data Reset
Sent from my GT-I9100 using Tapatalk 2

Please Help
Jokesy said:
Now boot to recovery mode and perform a Factory Data Reset
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.

Micheal86 said:
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Click to expand...
Click to collapse
Turn off your phone, push up on volume+homebutton then hold power! And then you're in recovery!

Micheal86 said:
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Click to expand...
Click to collapse
to boot to recovery mode.
1)turn off ur phone first
2) then hold the three button combo(Vol up + Home + Pwr button) simultaneously, hold until u see recovery then release.
3) in recovery u have the option ' Wipe Data/factory reset, hit the same and in the next screen select 'yes' to perform the wipe.
4) after finishing the same, again in recovery select ' reboot system' and wait for ur phone to reboot

Please Help
Sun90 said:
to boot to recovery mode.
1)turn off ur phone first
2) then hold the three button combo(Vol up + Home + Pwr button) simultaneously, hold until u see recovery then release.
3) in recovery u have the option ' Wipe Data/factory reset, hit the same and in the next screen select 'yes' to perform the wipe.
4) after finishing the same, again in recovery select ' reboot system' and wait for ur phone to reboot
Click to expand...
Click to collapse
Thanks.
After doing everything will my beauty lost it`s rooted feature ? If so, then what should I do to root it again ? Is it the same before ? But the only difference is then it was ICS and now this will be GB (as I download the GB stock rom).
Now it will be :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
Would you be kindly enough to guide me to root it again, so that after rooting I will be able to flash an ICS AOKP custom rom ?
BTW , it will be fine if the CF - ROOT version is 5 or higher.

Please Help
Adarzannh said:
Turn off your phone, push up on volume+homebutton then hold power! And then you're in recovery!
Click to expand...
Click to collapse
Thanks Sir.
I will try it.

Micheal86 said:
Thanks.
After doing everything will my beauty lost it`s rooted feature ? If so, then what should I do to root it again ? Is it the same before ? But the only difference is then it was ICS and now this will be GB (as I download the GB stock rom).
Now it will be :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
Would you be kindly enough to guide me to root it again, so that after rooting I will be able to flash an ICS AOKP custom rom ?
BTW , it will be fine if the CF - ROOT version is 5 or higher.
Click to expand...
Click to collapse
Yes, you will lose root access.
You can download CF-ROOT kernel XWKF3 here: download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
You need to first flash a stock based ICS ROM (at least), before flashing any AOKP based Rom
Sent from my GT-I9100 using Tapatalk 2

Please Help
Jokesy said:
Yes, you will lose root access.
You can download CF-ROOT kernel XWKF3 here: download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
You need to first flash a stock based ICS ROM (at least), before flashing any AOKP based Rom
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Many, many thanks Sir,
for your most valuable advice, which you have given from the very beginning.
One thing, by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
Sir, Should I flash This One First ?
How do I install CWM v.6 (as I have read that it is much better than v.4 or v.5) after flashing the ICS AOKP ?

Please Help
Thank you all for helping me a lot.
Now I just want to know that after flashing GB 2.3.3 ( KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2) Why I can not root my device ?
Whenever I try to root it, after flashing the Kernel (CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4), it always says:
Checking Device Connection...
Device Connected!
Restarting ADB Server...
Checking ROOT Access...
Superuser Request Has Been DENIED! Aborting...
Why it is happening and how to solve it ?

Micheal86 said:
Thank you all for helping me a lot.
Now I just want to know that after flashing GB 2.3.3 ( KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2) Why I can not root my device ?
Whenever I try to root it, after flashing the Kernel (CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4), it always says:
Checking Device Connection...
Device Connected!
Restarting ADB Server...
Checking ROOT Access...
Superuser Request Has Been DENIED! Aborting...
Why it is happening and how to solve it ?
Click to expand...
Click to collapse
after flashing that GB firmware, do a factory reset, after that try rooting ur phone and see

Please Help
Sun90 said:
after flashing that GB firmware, do a factory reset, after that try rooting ur phone and see
Click to expand...
Click to collapse
Thanks for your reply.
I just want to share something with you.
I have read somewhere in this forum that never do a factory reset with the stock rom (because of it`s kernel). First anyone have to change the kernel of the stock rom with siyah or dorimanx or darknight and then do anything you want.
According to that I have just tried to do that, but don`t know why I cann`t. Whenever I try to do that it always says "no signature validation",or something like that. I use CWM v.4.
Do I change the CWM to v.5 or v.6 by flashing ? I just don`t want to use CWM v.4.
BTW, now I am in :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
It` rooted. Do I flash any ICS rom in it ? If so, please help me to do that.
Please guide me.

Micheal86 said:
1.
I have read somewhere in this forum that never do a factory reset with the stock rom (because of it`s kernel). First anyone have to change the kernel of the stock rom with siyah or dorimanx or darknight and then do anything you want.
2.
According to that I have just tried to do that, but don`t know why I cann`t. Whenever I try to do that it always says "no signature validation",or something like that. I use CWM v.4.
3.
Do I change the CWM to v.5 or v.6 by flashing ? I just don`t want to use CWM v.4.
4.
BTW, now , It` rooted. Do I flash any ICS rom in it ? If so, please help me to do that.
Please guide me.
Click to expand...
Click to collapse
1.
You are reading it WRONG!
What you read is only applicable to stock ICS 4.0.4 firmware. Nothing more!
Therefore in your case it is not applicable.
Those kernels you listed are ICS kernels, if you flash them on your phone, your device simply won't boot.
2. The reason why you couldn't flash those kernels is because they required minimum of CWM version 5.
3. You can change it by simply flashing Siyah kernel meant for gingerbread which comes with CWM version 5.
Like i said earlier, don't flash ICS kernel on Gingerbread, except an expert advise you on something.
4. If you want to flash an ICS ROM, it's very simple.
- First, you need to download Siyah kernel (for GT I9100, zip version) for gingerbread here : www.gokhanmoral.com/gm/2012/01/13/siyahkernel-v2-6-7/
- Flash the Siyah kernel via CWM recovery
- Download any stock based ICS ROM of your choice. When you are done, let me know.
Sent from my GT-I9100 using Tapatalk 2

Please Help
Jokesy said:
1.
You are reading it WRONG!
What you read is only applicable to stock ICS 4.0.4 firmware. Nothing more!
Therefore in your case it is not applicable.
Those kernels you listed are ICS kernels, if you flash them on your phone, your device simply won't boot.
2. The reason why you couldn't flash those kernels is because they required minimum of CWM version 5.
3. You can change it by simply flashing Siyah kernel meant for gingerbread which comes with CWM version 5.
Like i said earlier, don't flash ICS kernel on Gingerbread, except an expert advise you on something.
4. If you want to flash an ICS ROM, it's very simple.
- First, you need to download Siyah kernel (for GT I9100, zip version) for gingerbread here : www.gokhanmoral.com/gm/2012/01/13/siyahkernel-v2-6-7/
- Flash the Siyah kernel via CWM recovery
- Download any stock based ICS ROM of your choice. When you are done, let me know.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Many,many thanks Sir, for your most valuable advice.
At first I`m really very sorry for my mistake.
I have just downloaded the recommended kernel (with link).
And I have downloaded three stock/stock based based ICS roms.
1. XWLPG.SalmanRom_v4
2. Omega_ICS_v15_Black_Blue_XWLPG
3. by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
(Though this one had the previous booting problem).
Now sir, please guide me.

Micheal86 said:
Many,many thanks Sir, for your most valuable advice.
At first I`m really very sorry for my mistake.
I have just downloaded the recommended kernel (with link).
And I have downloaded three stock/stock based based ICS roms.
1. XWLPG.SalmanRom_v4
2. Omega_ICS_v15_Black_Blue_XWLPG
3. by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
(Though this one had the previous booting problem).
Now sir, please guide me.
Click to expand...
Click to collapse
1. People who ask questions hardly make mistakes. This is the reason why you haven't yet made any mistake.
2. The third ICS firmware you posted can only be flashed via Odin. I'll say, just keep it somewhere. You won't need it for now.
3. Have you flashed the Siyah kernel yet?
If yes, please post your present and kernel details
Sent from my GT-I9100 using Tapatalk 2

Please Help
Jokesy said:
1. People who ask questions hardly make mistakes. This is the reason why you haven't yet made any mistake.
2. The third ICS firmware you posted can only be flashed via Odin. I'll say, just keep it somewhere. You won't need it for now.
3. Have you flashed the Siyah kernel yet?
If yes, please post your present and kernel details
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Sir, I have just try to flash the kernel, but I cann`t.
It says :
"E: signature verification failed
Installation aborted".

Related

[KERNEL] GT-I9100 ROOTED STOCK Kernels by STOCK+ Team (ALL NEW VERSIONS + TOUCH CWM!)

Hello everyone,
STOCK+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Please find latest of kernels listed below:
ROOTED! I9100XXLPH - ICS (4.0.3) - CL: 1104396 - B.Date: 16-02-2012 -[/b] Touch CWM Recovery Download HERE!
ROOTED! I9100XXLPB - ICS (4.0.3) - CL: 99600 - B.Date: 29-01-2012 - Samsung Recovery Download HERE! or Touch CWM Recovery Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
If you like our modifications, support us with even a little donation for a beer -> Click to donate!
Don't forget to follow our service at Twitter (@SamsungUpdates) or (soon) Samsung-Updates.com
Best regards for all XDA-DEVELOPERS members! we love ya!
* reserved *
* reserved again *
Looking good mate. Good luck
Sent from my GT-I9100 using XDA App
Touch recovery added to stock kernels, you can choose now if you want a kernel which is only ROOTED with all rest stock by samsung or, base samsung kernel with touch recovery included and rooted
Enjoy!
Thank you..
Is odin version lony ?
goodluck! trying this maybe in the near future
tonz22 said:
Thank you..
Is odin version lony ?
Click to expand...
Click to collapse
Yup, its odin version
Looking forward to see more stock kernel from you. Good luck
Can we get a CWM flashable zip of the touch based version?
Sorry for my stupid question but is this only for ICS? I'm little confused, or can we use this for stock to?
Sent from my Samsung Galaxy SII using Tapatalk
Its for ICS as stated in first post if you want to request any other kernel let me know in this thread.
Also, for now we provide only ODIN images, which is most suitable for people with or without CWM already installed.
Thanks!
(ODIN is in the package.)
I havent used odin in a whille. Could someone please refresh my memory, which do I flash this under, pda, phone or csc? I obviously know this isn't bootloader
Grooby said:
Its for ICS as stated in first post if you want to request any other kernel let me know in this thread.
Also, for now we provide only ODIN images, which is most suitable for people with or without CWM already installed.
Thanks!
(ODIN is in the package.)
Click to expand...
Click to collapse
Like i thought, I got confused.by the stock if you could do a kernel for stock ROM with touch recovery it would be awesome.
You just got Samsunged from Tapatalk
Do we need to execute runme.bat if the phone is already rooted and has su installed?
First of all its a stock rom (dont mix it with team name which is STOCKPLUS) + the touch CWM added (su will install automatically) so just flash with ODIN as PDA and enjoy samsung rom with good recovery and root
secondly, if you got a su installed then you dont need to run runme.bat, just install superuser from market or from package shipped with kernel (adb install Superuser.apk)
Enjoy!
Nagarebozhi said:
Like i thought, I got confused.by the stock if you could do a kernel for stock ROM with touch recovery it would be awesome.
You just got Samsunged from Tapatalk
Click to expand...
Click to collapse
It is stock kernel with touch recovery to get stock rom with touch recovery just install stock ROM (LPB) and then flash this kernel simple and clean
MrBadgerMilk said:
I havent used odin in a whille. Could someone please refresh my memory, which do I flash this under, pda, phone or csc? I obviously know this isn't bootloader
Click to expand...
Click to collapse
put it as PDA
Grooby said:
put it as PDA
Click to expand...
Click to collapse
It will increase custom binary count huh?
Sent from my GT-I9100 using XDA App
Grooby said:
It is stock kernel with touch recovery to get stock rom with touch recovery just install stock ROM (LPB) and then flash this kernel simple and clean
Click to expand...
Click to collapse
But you said it was for ics?, I want a kernel for 2.3.5/2.3.6
But
Grooby said:
Its for ICS as stated in first post if you want to request any other kernel let me know in this thread.
Also, for now we provide only ODIN images, which is most suitable for people with or without CWM already installed.
Thanks!
(ODIN is in the package.)
Click to expand...
Click to collapse
"You just got Samsunged from Tapatalk"

[Q] Which CWM version

Hi, I am running an ics custom rom from rizdroid 19100xwlp4-19100xxlps-19100luxlp1 and I would like to flash clockworkmod to my rooted phone via Odin but not sure which version I need. Any help please or advise please.
Alan
I use Siyah Kernel which has CMW 5.5.0.4.
you can get this kernel from here:
http://www.gokhanmoral.com
Thanks, do I just flash my phone using Oldi with the Kernal or is there anything else I have to do?
If your phone is I9100 international model, just put the Siyah kernel TAR file on the ODIN PDA and flash.....
How did you flash the custom rom "rizdroid 19100xwlp4-19100xxlps-19100luxlp1"
can you give us the link/thread for this ROM
Here is rizdroid's custom rom http://forum.xda-developers.com/showthread.php?t=1544487&page=416
I flashed used Odin, and my phone is an international 19100
Alan
maxal said:
Here is rizdroid's custom rom http://forum.xda-developers.com/showthread.php?t=1544487&page=416
I flashed used Odin, and my phone is an international 19100
Alan
Click to expand...
Click to collapse
my friend, this is not a custom ROM this is official ICS rom, after installing from ODIN, if you have followed the rooting method of the same thread instruction, (CF-root) you should have already a latest Clockworkmode installed in your Phone. no need of flashing again any kernels.
to checkout this just shut down the phone and press Vol-up+home+power button and hold for few seconds to appear the galaxy logo and keep pressing til it blinks and appear again then release.....you will get the CWM recovery
Hi all I did was flash the rom via Odin and I have an app that checks if you are rooted and it says I am but when I do the test that you said to do I get the Android system recovery not cwm recovery.
Alan
maxal said:
Hi all I did was flash the rom via Odin and I have an app that checks if you are rooted and it says I am but when I do the test that you said to do I get the Android system recovery not cwm recovery.
Alan
Click to expand...
Click to collapse
CF-Root for your firmware is not found so just flash Siayah from ODIN, make sure flashing file should be .TAR and selected from PDA.
http://gokhanmoral.desean.net/siyahkernel/v3.0/Siyah-v3.0.1.tar
Thanks mate all done now and all ok. I bought the app to clear the yellow triangle which worked also. Any tips you have for a rooting noob would be much appreciated.
Alan
maxal said:
Thanks mate all done now and all ok. I bought the app to clear the yellow triangle which worked also. Any tips you have for a rooting noob would be much appreciated.
Alan
Click to expand...
Click to collapse
The first thing you have to do after rooting is Nandroid back up and EFS back up of your phone...
Dont be after the shortcuts and tips, read as much as possible, There is no substitute for READING for COMPREHENSION.
these STICKIES will give you the knowledge about SGS2 from basic to the deepest.....
Try the N. E. A. K. Kernel with the modded cwm, works very well!
Gesendet von meinem GT-I9100 mit Tapatalk
Thanks Keasbu for replying I have downloaded your Kernel I take it just flash my phone using Odlin but what about the Kernel that I flashed that Zaheedahmed gave me the link for. Also another question I want to play around flashing different roms to my phone do I need to flash a new kernel everytime.?
Alan
maxal said:
Thanks Keasbu for replying I have downloaded your Kernel I take it just flash my phone using Odlin but what about the Kernel that I flashed that Zaheedahmed gave me the link for. Also another question I want to play around flashing different roms to my phone do I need to flash a new kernel everytime.?
Alan
Click to expand...
Click to collapse
It is not terribly required to change your Kerenel every time you flash, the suitable kernel already packed by devs for their ROM is more than enogh for running the Phone...but further it is your choice to change the kernel after exploring the reviews and features of the custom kernels and decide whether it will give you any advantage or not....Also no need to worry about Clockworkmode it will be their already on the (allmost all) Custom rom.
the kernel which I suggested that time was mainly for you to get a Clockworkmode recovey and rooting which anable you to flash roms further
NOTE : Once you have already got Clockworkmode no need to use the Odin version of the Custom Kernels, just take the CWM version and put it on your SD card and falsh it from CWM recovery.
Thanks for replying zaheedahmed, what do you think of Keasby's Kernel is it worth flashing will I loose clockworkmode?
Alan
maxal said:
Thanks for replying zaheedahmed, what do you think of Keasby's Kernel is it worth flashing will I loose clockworkmode?
Alan
Click to expand...
Click to collapse
Sorry mate I have no personal expreance with any ICS kernels yet...
just read the threads....to find which is most popular and least problem giving....,.do you know the questian "Which is best" is baned in the XDA..
---------- Post added at 11:48 AM ---------- Previous post was at 11:42 AM ----------
No you wont loose the CWM, all the custom kernels are attached with a CWM recovery...that is the main goody of SGS2 kernels...
One more question if I flash a new release ics rom and it doesn't have a csc with xeu do I flash a csc xeu file at the same time as flashing the ics rom, will this work?
Alan
maxal said:
One more question if I flash a new release ics rom and it doesn't have a csc with xeu do I flash a csc xeu file at the same time as flashing the ics rom, will this work?
Alan
Click to expand...
Click to collapse
Sorry experts can give comments about the compatibility of such mix flashing....
But why are you so concerned about CSC, what difference is giving you XEU than others just for my information.
CSC can only flashed from ODIN, you will loose your root and you have to Root it again by flashing a Root kernel again...
Sorry I thought I needed csc xeu as I live in the UK
CSC not required if you enter network settings manually .
jje

GT-I9100 - CWM Recovery won't install

Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
XCQT said:
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
Click to expand...
Click to collapse
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Jokesy said:
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Click to expand...
Click to collapse
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
XCQT said:
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
Click to expand...
Click to collapse
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
XCQT said:
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Jokesy said:
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thank you so much. Got it up and running
CWM not getting installed
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Jay_7 said:
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Click to expand...
Click to collapse
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
TheATHEiST said:
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
Click to expand...
Click to collapse
M sorry bt i got that so what can i do to install the latest CWM ???
Jay_7 said:
M sorry bt i got that so what can i do to install the latest CWM ???
Click to expand...
Click to collapse
It doesnt matter, you have no reason to have latest, they are just updates to support more devices.
Just flash custom kernel, like latest Siyah, the kernels contain CWM.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
for step 1, we are installing a temp CWM for flashing kernel in step 2?
phone stuck in restarting when flashing cwm
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Flash siyah v6.
Sent from the little guy
gastonw said:
Flash siyah v6.
Sent from the little guy
Click to expand...
Click to collapse
Is this for me?...sorry...I didn't catch you.......Can you please elaborate or any link for my phone model and download links
---------- Post added at 07:52 AM ---------- Previous post was at 07:12 AM ----------
sunyreza said:
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Click to expand...
Click to collapse
can anybody help with details.........my phone is likely dead man.........
Yes it was meant for you, flash siyah v6 .tar version via Odin.
Sent from...this is not even my S2
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
tissaoui said:
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
Click to expand...
Click to collapse
I assume you are talking about PhilZ recovery........
If all you want is a custom recovery on a stock firmware then you have to match the recovery to the firmware build......
And you *do* realise that the leak/test firmware is not as stable as release firmwares don't you?
http://i.imgur.com/rVnFwJM.jpg

[q] need help

Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Rash732 said:
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Click to expand...
Click to collapse
first flashed a karnel then try
Sent from my Micromax A68 using xda premium
country
premsrj said:
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Click to expand...
Click to collapse
THANKS
yh i installed cm10 again n its booting up well n working again
i wana make sure can i download any stock rom of this device countries doesn,t matter for example i am in united kindom can i choose india or etc it will works ?
And one more question , can i flash my device through odin to direct with gingerbread 2.3.6 or should flash with lower rom like 2,21 etc ...
hi
Sent from my GT-I9000 using xda app-developers app
thank you man

[Q] Install Philz cwm6 on I9100G

Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
thesm said:
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
Click to expand...
Click to collapse
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
PureMind0 said:
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
Click to expand...
Click to collapse
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
thesm said:
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
Click to expand...
Click to collapse
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
PureMind0 said:
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
Click to expand...
Click to collapse
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
thesm said:
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
Click to expand...
Click to collapse
Ask here
http://forum.xda-developers.com/showthread.php?t=1846277
Sent from my GT-I9100 using Tapatalk 2

Categories

Resources