My Mobile: SK telecom SK W-S170,
Spec:
CPU：Qualcomm MSM8260, 1.5GHz (Dual Core)
GPU：Adreno 220
(ROM)：8GB
RAM：1GB
Camera：500萬畫素
Screen Size：4.3吋
Resoultion：540*960 pixels
OS：Android 2.3
This Mobile config too strong, Price low. (around US$200) But can't find any Support from offical(Latest just Android 2.3.4, seem Support stopped)
any can port CM7, CM9 or CM10 to this mobile?
Thx for all.
No source code for this device
Help
Please help us with the creation of the core to the smartphone!
SK W-S170
waikwokt said:
My Mobile: SK telecom SK W-S170,
Spec:
CPU：Qualcomm MSM8260, 1.5GHz (Dual Core)
GPU：Adreno 220
(ROM)：8GB
RAM：1GB
Camera：500萬畫素
Screen Size：4.3吋
Resoultion：540*960 pixels
OS：Android 2.3
This Mobile config too strong, Price low. (around US$200) But can't find any Support from offical(Latest just Android 2.3.4, seem Support stopped)
any can port CM7, CM9 or CM10 to this mobile?
Thx for all.
Click to expand...
Click to collapse
First of all, is your device Rooted? I know there are a few re-sellers that sell this device pre-rooted, but they are hard to find. Anyway, if you can read Chinese, the following sites has some good info:
www.apk.tw
wpcnn.com
Not much in terms of custom ROMs, but Root is definitely done.
Root is present and recovery. On apk.tw is no information. It is best to progress is to 4pda. And no source can not be ported Rom's
http://4pda.ru/forum/index.php?showtopic=335311
我也用了这个手机悲剧
我也用了这个手机悲剧
Related
Hello,
I have a SmartPhone from an not very well known brand and I want to make an android update for it (from 2.3.6 to 4.0)
I dont want to change anything (no custom theme and no custom apps) i only want to create an update.
Because (i think) nobody knows this device i dont know how to start.
Device: AT-AS43D
specs:
Qualcomm Snapdragon, MSM7227-1 Processor
Runs android 2.3.6 very few customized by the brand
Dual Sim
WCDMA/HSPA 850/1900/2100, GSM/GPRS/EDGE 850/900/1800/1900
Flash Rom: 512MB
Ram: 512MB
Camera
Pixel 5MP Back, VGA Front
Zoom 4 times
Display
LCD 4.3inch 480*800 Pixels WVGA
Battery Li-ion accu 1500 mAh
and it has a 2gb micro sd card
Other questions?
Is ClockWork Recovery for every device?
(if no?) How is it possible to extract the stock rom without ClockWork?
I hope this is enough information
Kind regards,
Bas
basnijkamp said:
Hello,
I have a SmartPhone from an not very well known brand and I want to make an android update for it (from 2.3.6 to 4.0)
I dont want to change anything (no custom theme and no custom apps) i only want to create an update.
Because (i think) nobody knows this device i dont know how to start.
Device: AT-AS43D
specs:
Qualcomm Snapdragon, MSM7227-1 Processor
Runs android 2.3.6 very few customized by the brand
Dual Sim
WCDMA/HSPA 850/1900/2100, GSM/GPRS/EDGE 850/900/1800/1900
Flash Rom: 512MB
Ram: 512MB
Camera
Pixel 5MP Back, VGA Front
Zoom 4 times
Display
LCD 4.3inch 480*800 Pixels WVGA
Battery Li-ion accu 1500 mAh
and it has a 2gb micro sd card
Other questions?
Is ClockWork Recovery for every device?
(if no?) How is it possible to extract the stock rom without ClockWork?
I hope this is enough information
Kind regards,
Bas
Click to expand...
Click to collapse
Hi,
I was wondering.. have you ever succeeded to get a update android version to the Wolfgang?
I hope so, so i can do the same with my phone.
Kind regards
Pitbullnl said:
Hi,
I was wondering.. have you ever succeeded to get a update android version to the Wolfgang?
I hope so, so i can do the same with my phone.
Kind regards
Click to expand...
Click to collapse
I have made some progress, but I didn't have much time for it because of college.
Remember porting a new version of android can cost you a lot of time.
Sorry I can't help you much.
Regards,
Bas
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
anybody?!
ROM majestic TAB 192
salutgabi said:
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
Click to expand...
Click to collapse
you can search for any " M901 " 4.0.4 ROM as " allwinner " or any other china product but....
you have to be sure that the ROM is made for 9 inches tablet
i will attach you a ROM that worked with me perfectly right on the same " majestic TAB192 "
stable ICS 4.0.4 ROM working perfectly fine
sorry to not respond before but i just saw the post
4shared.com
/file/ecDfkpI8/L090-1.
html?
sorry i am new i cant post full link
you have to collect it
thanks brother but you didnt wrote the method to flash the firmware into majestic tab 192
Thank you very much for your help. The problem was solved thanks to you. @shakeelajmal : You need to flash it with LiveSuit. it's easy
My friend give me this tablet to install the Play store. I don't have much experience with tablets and android in general, but I like to experiment so I flashed the tablet with the firmware posted by Future-Gate. Everything went ok, except the wifi that cannot be turned on (the switch stay "on" for a few seconds and then return to "off").
I usually search for info by myself (I revived an almost dead Galaxy S3 some months ago) but at the moment I'm panicked because the tablet is not mine and cannot find much informations.
On another thread I read that it could be a recovery problem (?) or a kernel problem. Somebody could point me on how to check/fix/workaround those problems?
Thank you.
Somebody with this tablet could please make a rom dump? I flashed it without backing up
thank you for the rom. it works well, except for the wifi. might have something to do with the drivers perhaps? i'm not very good with android.
I tried a lot of custom roms and they either worked fine and the wifi wasnt working, or the wifi was working but a lot of other things didn't work. Yours seems to be the best and smoothest, but the broken wifi makes makes the tablet useless. Please help
pls can you help me with the link to get your tab working again, I have an audiola that needs recovery
Hi friends.. this is my first post. So pardon me if I am posting in the wrong place.
I have a Swipe MTV Slash 4x tablet. In case you are wondering, its a chinese OEM tablet that has been imported & sold here in India by Swipe Telecom under their brand name.
Its based on a quadcore mediatek 8382 soc clocked at 1.3ghz & the GPU is a dual core Mali 400MP clocked at 533mhz. RAM is 1GB. Being of chinese make, the tablet came shipped with Jelly Bean 4.2.2 which is mostly stock with very little to no skinning.
I rooted the tablet very easily using Framaroot v1.9.0. I have installed Roehsoft Ram Expander & Xposed (Gravity Box module) & thus far everything is fine. I remember reading somewhere(guess wikipedia) that the mt8382 is designed for tablets & can run stable at speeds upto 1.6ghz. However since its meant for entry level & lower mid range devices, its usually underclocked to 1.2/1.3ghz out of the box.
I want to try my luck & "overclock" the cpu a bit. I am aware that the stock kernel doesn't support overclocking. So I basically have 2 options..
1. Flash a custom kernel that supports oc
2. Flash a custom ROM that ships with a kernel supporting oc, like cyanogen mod or anything else.
Here is my problem. I am unable to find a kernel or a ROM that is compatible with my device. I am aware of the risks involved in overclocking & am prepared to back up all my data & install a custom recovery before proceeding. I am also mentally prepared for the worst case scenario - a permanently bricked device.
Can somebody help me in finding a kernel for my device that supports overclocking or a custom ROM that has built in oc support?
I am attaching some screenshots that will help you in getting an idea of what device I have.
Thanks in advance
Dear Team,
I'm quite new in this Forum and I'm sorry If this 3d is not in the right section
I'm going to "play" with my New Cisco Dx80 device, I would like to install a Standard Android Firmware.
At the moment there is an installtion of Cisco Customized Android 4.1.1 .
The Devices is based on ARM Cortex A9 @ 1.5Ghz with GPU PowerVr SGX544.
Using EsFile Explorer, I found in /system/app several apk including Galaxy4.apk, Galaxy4.odex ; seems that Cisco take the firmware somewhere (from galaxyS4?) and customized it according their needs; also the Couple A9+SGX544 seems like the same of several Galaxy S4 hardware.
The question is : there is a way to install "general" Android firmware release (rooted) that is compliant with the describer hardware ?
Thanks a lot.
Cisco DX80 Device
Did you ever find a way to put a generic Android release on this device ? I'm in the same situation with a DX80 and would just like to get a more current version of Android for it.
Thanks
crystal_chris said:
Dear Team,
I'm quite new in this Forum and I'm sorry If this 3d is not in the right section
I'm going to "play" with my New Cisco Dx80 device, I would like to install a Standard Android Firmware.
At the moment there is an installtion of Cisco Customized Android 4.1.1 .
The Devices is based on ARM Cortex A9 @ 1.5Ghz with GPU PowerVr SGX544.
Using EsFile Explorer, I found in /system/app several apk including Galaxy4.apk, Galaxy4.odex ; seems that Cisco take the firmware somewhere (from galaxyS4?) and customized it according their needs; also the Couple A9+SGX544 seems like the same of several Galaxy S4 hardware.
The question is : there is a way to install "general" Android firmware release (rooted) that is compliant with the describer hardware ?
Thanks a lot.
Click to expand...
Click to collapse
Damn I wish someone had figured something out for this, cause I would really like to know too
the same question and really appreciate if someone can give it a better custom ROM to explore
Thank you guys!
Is there any updated android software for the Dx80 conference device; or best software availavble download? If so, please pst me with link or info how I can get this device working. Thank you in advance for your assistance.
Got rebranded android device - Need to figure out if there is a custom ROM I can load
Fair warning - I'm an android noob.
I'm have a rebranded android phone and I'm trying to find alternate ROM's for it.
The phone has the following specs:
Brand: AG Mobile
Model: AG Chrome Swift
Operating System: Android 4.4.2
Display 4.5" FWVGA
Memory 4G+512MB
CPU 1.2G Dualcore
Manufacturer refuses to release their ROM's, updates are non-existent. I'm hoping this is simply a re-branded HTC or something similar that I could an alternate ROM on.
When I used the APK Installer detector app it picked it up as:
Manufacturer: HTC
Description: YunOS ACB Interface
Any assistance to figure this out will be greatly appreciated.
It is a knock off device. You are out of luck to be honest. No one develops for knock off device.
Thanks man - possibly not the right forum for this: Is it possible to get a ROM off a working model to re-flash another?
Would solve at least one of my headaches here (and thanks in advance for any help!)
No because you will need a custom recovery to flash it.