I recently installed Semi 17 Rom on my SII. I noticed that the charge rate according to ELIXIR2 is around 640 mA. I've updated to AJ's latest kernel, and it's still the same. I downloaded extweaks, and 650 mA is the highest setting available. How can I change this to a higher rate, and should I?
I was previously running unnamed, and I know the phone would charge at about 2000mA. I seem to recall that a lower charging rate could cause a problem while using navigation and google music. I had a car charger that only charged at about 500mA and it could not keep up while using these two apps.
Any help is greatly appreciated.
Zohdug said:
I recently installed Semi 17 Rom on my SII. I noticed that the charge rate according to ELIXIR2 is around 640 mA. I've updated to AJ's latest kernel, and it's still the same. I downloaded extweaks, and 650 mA is the highest setting available. How can I change this to a higher rate, and should I?
I was previously running unnamed, and I know the phone would charge at about 2000mA. I seem to recall that a lower charging rate could cause a problem while using navigation and google music. I had a car charger that only charged at about 500mA and it could not keep up while using these two apps.
Any help is greatly appreciated.
Click to expand...
Click to collapse
You can not make this phone charge any faster, this has been well documented.
Nick281051 said:
You can not make this phone charge any faster, this has been well documented.
Click to expand...
Click to collapse
Actually u can. If u add more.... https://www.youtube.com/watch?v=fyV2cPLuFuA&feature=youtube_gdata_player
Phalanx7621 said:
Actually u can. If u add more.... https://www.youtube.com/watch?v=fyV2cPLuFuA&feature=youtube_gdata_player
Click to expand...
Click to collapse
Damn i always forget about that!
Sent from Team Pirate! Using Tapatalk 2
Nick281051 said:
You can not make this phone charge any faster, this has been well documented.
Click to expand...
Click to collapse
OK. So I went back to Entropy's thread on his DD kernel and did some more reading. Then I flashed back to unnamed, because I thought I might be loosing my mind, and I'm still seeing the same results. I guess this means that something funky is going on with Unnamed/Elixir.
Thanks for being gentle with the noob
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I just found an apple's USB charger. It says the output current is 2100 mA. Is it okay if I use in my Thunderbolt? The only things I know that all the current Thunderbolt chargers are up to 1000 mA.
Thank you very much
ccmks said:
I just found an apple's USB charger. It says the output current is 2100 mA. Is it okay if I use in my Thunderbolt? The only things I know that all the current Thunderbolt chargers are up to 1000 mA.
Click to expand...
Click to collapse
The TB won't use more than 1 A. The USB connectors are only spec'd for 1.8A. It may work, it may not, but it won't charge any better than the one which was included with your TB.
mike.s said:
The TB won't use more than 1 A. The USB connectors are only spec'd for 1.8A. It may work, it may not, but it won't charge any better than the one which was included with your TB.
Click to expand...
Click to collapse
Actually, I'd like to have my TB charged fast. However, I worry if the high current could damage this phone.
ccmks said:
Actually, I'd like to have my TB charged fast. However, I worry if the high current could damage this phone.
Click to expand...
Click to collapse
"The TB won't use more than 1 A." Is there something about that statement that's unclear?
mike.s said:
"The TB won't use more than 1 A." Is there something about that statement that's unclear?
Click to expand...
Click to collapse
Okay, I meant was about the charging. For instance, if I use the 1 A, it might take about 3 hours to get fully charged. I wonder if the 2 A will decrease the time of charging!
You just don't get it, do you
Sent from my ADR6400L using XDA App
ccmks said:
Okay, I meant was about the charging. For instance, if I use the 1 A, it might take about 3 hours to get fully charged. I wonder if the 2 A will decrease the time of charging!
Click to expand...
Click to collapse
You're in a maze of twisty passages, all alike.
ccmks said:
Okay, I meant was about the charging. For instance, if I use the 1 A, it might take about 3 hours to get fully charged. I wonder if the 2 A will decrease the time of charging!
Click to expand...
Click to collapse
No.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
10char
title says it all really everytime my phone is around the 30-40% range it drops suddenly to 19% always to 19% and I have no clue why I've calibrated, wiped and did a restart while plugged in battery pull and still nothing.
Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from Atrix 4G running CM7 ICS Final @ 1.2Ghz
Try to see which applications are running and what is more consumundo battery.
And also recommend that you calibrate. Me, whenever I do this procedure, I have a good improvement in autonomy.
Does this happen across different ROMs? You might have a bad battery.
DopeHack said:
title says it all really everytime my phone is around the 30-40% range it drops suddenly to 19% always to 19% and I have no clue why I've calibrated, wiped and did a restart while plugged in battery pull and still nothing.
Any suggestions?
Sent from Atrix 4G running CM7 ICS Final @ 1.2Ghz
Click to expand...
Click to collapse
I only flashed once never switched roms
Sent from Atrix 4G running CM7 ICS Final @ 1.2Ghz
Use Better Battery Stats and Watchdog Lite to see whats happening. In watchdog lite u can set the cpu percentage max to be 20% so that anything going beyond that can be reported. Usually works for me.
Sent from my MB860 using Tapatalk
live4nyy said:
Does this happen across different ROMs? You might have a bad battery.
Click to expand...
Click to collapse
I think it might have been the state my battery was in when I flashed the first time because it hasn't done it yet and I was rom surfing last night nothing out of the ordinary happened I'll report back after work tomorrow that should be a good enough time to test it out
Sent from my Atrix-4G, stock 2.3.4 (rooted)
Can anybody help me with this?
Sent from my Neutrino'd out Atrix @ 1.3Ghz.
This may or may not be new, if not then delete this thread.
From everything I've read, the OPX doesn't support quick charge/rapid charging. But my OnePlus X says it is charging rapidly when I plug it into my wife's GS6 adaptive fast charger.
This just happened so I need to give it an hour to see how "Rapid" it is. I'll report back the results.
If anybody has any info on whether or not this is legit please share. I'm confused ?
Currently running latest official CM13 nightly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONE E1005 using Tapatalk
We have 2A charger, so when charging with this input current, it shows charging rapidly. This is not a fast charging. If you charge with 1A or usb, it wouldn't show.
It's a new feature in MM. It shows how fast the phone is charging. If you plug it in USB it will show it charge slowly. Currently blu_spark and boeffla kernels have option to enable fast charging (manually configure V and mA).
Kir3 said:
It's a new feature in MM. It shows how fast the phone is charging. If you plug it in USB it will show it charge slowly. Currently blu_spark and boeffla kernels have option to enable fast charging (manually configure V and mA).
Click to expand...
Click to collapse
Isn't it quite dangerous just to manually increase voltage and ampere? You can't rely on that imo since you don't know the long term effects, or am I missing something?
I mean, the CPU probably supports it until some kind of level but since fast charge isn't activated.... (possible anyhow?)
mafioso16 said:
Isn't it quite dangerous just to manually increase voltage and ampere? You can't rely on that imo since you don't know the long term effects, or am I missing something?
I mean, the CPU probably supports it until some kind of level but since fast charge isn't activated.... (possible anyhow?)
Click to expand...
Click to collapse
Dangerous, yes. How much, I don't know.
Sent from my OnePlus using XDA Labs
mafioso16 said:
Isn't it quite dangerous just to manually increase voltage and ampere? You can't rely on that imo since you don't know the long term effects, or am I missing something?
I mean, the CPU probably supports it until some kind of level but since fast charge isn't activated.... (possible anyhow?)
Click to expand...
Click to collapse
IMHO, the dev knows what he should or should not implement for our device features. If they implement something that is means it compatible with our devices's hardware. But, use at your own risk.
i've been facing problem with the QC. I read that probably is the cable but i tried with S8 Cable and i had the same results...
I changed the rom (Aurel v12 / Cuoco v91) and didnt help me!
usually when i restart the phone th QC works but just for couple minutes after that goes down again!
i dont know whats happening! before it used to go under de 4000 MAh now is under 1600 MAh. :crying::crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PD: Sorry for my bad English
Try to calibrate your battery
Sent from my Le X820 using Tapatalk
The battery has a very low voltage
I have 4.377 V
m890 said:
Try to calibrate your battery
Click to expand...
Click to collapse
I will try!! Thanks
lichostan said:
The battery has a very low voltage
I have 4.377 V
Click to expand...
Click to collapse
That's not the problem whatsoever, as he have a low battery percentage and that's how batteries work. When charged it's 4.3-4.4V and when they are put to use, voltage slowly falls to the cut-off point which is 3.7V on most Lithium-ion batteries.
The issue that OP have may be related either to an insufficient cable or software issue. I would recommend to charge while phone is turned off to see if QC works and if so, factory reset the device or change the rom.
Sent from my Le X820 using Tapatalk
GethPrime said:
That's not the problem whatsoever, as he have a low battery percentage and that's how batteries work. When charged it's 4.3-4.4V and when they are put to use, voltage slowly falls to the cut-off point which is 3.7V on most Lithium-ion batteries.
The issue that OP have may be related either to an insufficient cable or software issue. I would recommend to charge while phone is turned off to see if QC works and if so, factory reset the device or change the rom.
Click to expand...
Click to collapse
Thanks Bro! ill do that
Slow charging issue.
I have changed cable but nothing happens.
It says charging rapidly but with turtle speed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
maybe is the charger?
wetito said:
maybe is the charger?
Click to expand...
Click to collapse
I have tried with my Samsung's phone charger (it is also 5V 2A), but charge rate remains same. Maybe my phone's battery going weak. But it's not even 2 year. It will in Nov.
And one thing more, actually it get fixed today after updating device. It charged at normal speed (an app showed 45% per hour), I usually don't use that app but I use it now to check charging status.
But now, it became again that slow. (App showing 12% per hour. 7hrs to full charge)
Akhil321x said:
I have tried with my Samsung's phone charger (it is also 5V 2A), but charge rate remains same. Maybe my phone's battery going weak. But it's not even 2 year. It will in Nov.
Click to expand...
Click to collapse
i don't think is a battery issue. also my battery is two years hold. i suggest you the original xiaomi cherger with a new cable. a more power charger is not compatible with mia3 tecnolgy. maybe the result can be a slow charging. are you on stock or custom rom? if you are on a costum rom probably is a software problem.
wetito said:
i don't think is a battery issue. also my battery is two years hold. i suggest you the original xiaomi cherger with a new cable. a more power charger is not compatible with mia3 tecnolgy. maybe the result can be a slow charging. are you on stock or custom rom? if you are on a costum rom probably is a software problem.
Click to expand...
Click to collapse
Yeah..it is on stock rom (android 11)
I dont know how it get fixed..but it's charging much faster now
its charger i am sure
csgoisepic said:
its charger i am sure
Click to expand...
Click to collapse
i'm agree with you
same problem here, but seem resolved with last update. I think it was a loading kernel module problem. the charger is good and the battery too. this is a kernel bug