Related
hello,
i have flashed the Nand android from the following link
http://forum.xda-developers.com/showthread.php?t=893948
Now I want to go back original win rom........
Problem is I am unable to make the Active Sync though my USB through android phone is detesting and in boot loader screen USB is coming up when I connect to USB.
How to uninstall the HSPL. magldr and then the nand android.
Guys I really need help any help is appreciated.
already answered in your other thread.
Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh:
Hi. I was given an LG-P769 to use as a Wi-Fi only "phone". It has Android 4.1.2 with a software version of P76920h.
I want to remove the T-Mobile apps because it won't be used on their network or any other network. I also want to install a newer version of android.
I am unable to connect it to a PC because the phone keeps saying connected and disconnected no matter what cable I use and the cables do work with other Android Devices.
I mainly run Ubuntu but I do have access to a Windows box but I don't see that helping because of the problem with connecting over a cable.
Did you followed all the tutorials carefully? Correct drivers? Manual replacement of them? If yes - this have to be a hardware issue, your microusb is gonna die soon
I found three guides that I followed. I messed something up because I was getting a security error or security violation message. I was able to use a different laptop and re-flash the T-mobile image onto it so the USB port still works. it could have been my cable Do you suggest a specific tutorial?
found three guides that I followed. I messed something up because I was getting a security error or security violation message. I was able to use a different laptop and re-flash the T-mobile image onto it so the USB port still works. it could have been my cable Do you suggest a specific tutorial?
Hello guys, im really in trouble. I have a general mobile e tab 5 tablet and i'm living some problems. This tablet don't have an microsd card so i can't setup anything from microsd. Don't have an os and when i connect to computer it's not being visible. I setup sdk android tools, fastboot or smth. This didn't work too. I'm updated the java things and it's still not working. I can't wiping datas, it's giving error like "failed to mount '/cache' and '/data' (invalid arguments), Unable to mount storage" and i can't doing any little thing. Im totally stucked, no way, im thinking only i can fix it from terminal but i don't know what i should to write I don't know what i should to do. Really i need help guys. Also ADB sideload not working too as i said, it's not being visible on computer. (Sorry for bad English.)
Is it detected by your computer (showes in device manager) but no storage or is it not detected at all?
You may need to install/reinstall usb drivers for ADB?
bailey239 said:
Is it detected by your computer (showes in device manager) but no storage or is it not detected at all?
You may need to install/reinstall usb drivers for ADB?
Click to expand...
Click to collapse
Nothing being detected, also i'm always keep opened the fastboot (from adb shell, sdk tools) with command "fastboot flashall"
You can check the picture. (I couldn't insert to image because i don't have 10 messages. )
i.hizliresim .com/aXk3nQ.png
I did everything, i deleted every usb drivers and setup again. At the same time i deleted from device manager every usb port and i setup again all of them. It's not detectable. In twrp MTP enabled and im opening adb sideload.
Just judging from the image you provided, it looks like your drivers are not installed properly. There are a few different drivers you can try, googles, Universal Naked Driver, Motorola, etc. I would suggest trying a different route than the one you took already. Your device is not being recognized, it must be related to the adb USB drivers.
bailey239 said:
Just judging from the image you provided, it looks like your drivers are not installed properly. There are a few different drivers you can try, googles, Universal Naked Driver, Motorola, etc. I would suggest trying a different route than the one you took already. Your device is not being recognized, it must be related to the adb USB drivers.
Click to expand...
Click to collapse
Can you help me about the links?
remove any spaces.
http ://koush.com/post/universal-adb-driver
http ://adbdriver.com/
https ://androidmtk.com/download-universal-adb-driver
http ://visualgdb.com/KB/usbdebug-manual/
I setup all of them, google usb drivers and also tablet usb drivers but nothing is working. I'm gonna cry actually.
Note: I think problem is TWRP. But another problem is computer is never seeing tablet because of TWRP. Tablet don't have a microsd card connection. No OS. Hard hard hard bricked. If i connect a USB Flash Memory to my tablet, can it work?
@AKagNA
Be specific with your device info. You still able to go in recovery, try flashing it with stock firmware, Please please please make sure you get proper firmware for your device, please read this information HERE before proceeding, it might take few minutes but this is useful,Also hit thanks button and share if you find it useful
Thanks
Salman
Salman Al-Badgail said:
@AKagNA
Be specific with your device info. You still able to go in recovery, try flashing it with stock firmware, Please please please make sure you get proper firmware for your device, please read this information HERE before proceeding, it might take few minutes but this is useful,Also hit thanks button and share if you find it useful
Thanks
Salman
Click to expand...
Click to collapse
Hello Salman, i tried to setup stock firmware with every usb driver and flash tool. I swear i tried everything and also i'm a programmer. I'm really understand the computer. But nothing is happenning. Even computer doesnt seeing the tablet.(Sorry for bad Eng..)
You could use flashfire download it from the playstore and download a new rom. Can you boot into os?
_Exeedy_ said:
You could use flashfire download it from the playstore and download a new rom. Can you boot into os?
Click to expand...
Click to collapse
There is no OS and i can't boot it.
Acer Chromebook CB3-431-C5FM (Edgar)
I am trying to boot this computer from a USB drive and cannot figure out how to. Can someone please help me?
With that model of Chromebook, I think you need to install/update the RW_LEGACY Firmware before you can boot from USB.
See the web address: mrchromebox.tech/#fwscript
Ok, its 2 years later & I’m going to try again . .
what I am trying to do is boot and install a linux operating system into this chromebook. I googled around and found nothing that works with this model. Can anyone help me with this?