[Q] Cable for Car Dock Mode and universal holder - Motorola Droid RAZR

Hi all,
i'm looking for to buy a Razr Maxx.
Now I have Milestone 2 and it have a simple method to "understand" Car Dock Mode, It have a gauss sensor on its back. This sensors recognoize a magnet on the dock and switch the phone to car dock. I purchased a little thin magnet and with some glue attached it to an universal holder.
This switched my universal holder to a Motorola Car Dock ).
I have to use a universal car dock, because i don't want to remove phone from silicon shell every time i use in the car, so i do not want to use a motorola cardock.
Reading around i found that Razr and Razr Maxx, do not have this magnet sensor, but the switch to car dock is hanled by special connection into USB cable.
So I would like to know it there is a USB Cable that switch phone to Cardock. Also a schema of the cable it's enought I can made by myself.
Many Thanks
Marco

There's no cable that activates car dock. However, I'm puzzled why you're not looking for software to activate car dock, or an alternative car dock app.

Nikorasu said:
There's no cable that activates car dock. However, I'm puzzled why you're not looking for software to activate car dock, or an alternative car dock app.
Click to expand...
Click to collapse
Hi, app require my interaction with the phone interface, after placing phone on the cradle and connecting cable. 3 Action to switch in car mode, in front of 2 action i done today simply placing and connecting to power cord.
This is reason whi i'm looking for a cable like this for HTC one X: http://shop.htcpedia.com/htc-usb-cable-activates-car-dock-app.html

Related

[REQUEST] Car Dock AUDIO without dock.

Alright, yes I know how to use the search function and I can launch the Car Dock application itself just fine with the previously mentioned shortcut, however I need to switch the mode itself apparently (i.e. with the steering wheel icon onscreen).
I own a Car Dock but I want to be able to use the included cable that supports both charging and audio output in one cord. THAT only works in Dock Mode (in fact it doesnt even charge when plugged directly in, let alone route the audio to the 3.5mm jack.
I have to say that so far the thought put into the Motorola accessories like this dock blow away the HTC options and this Micro-USB to combo USB/3.5mm is exactly what I need but sometimes I just want to be able to only plug in ONE cord.
Any thoughts?
Im not sure what you are asking -- I disabled the Car Dock application by telling Tasker to open by default when plugged in.. I get MEDIA audio through the audio plug from the car dock.
Like I said, along with the car dock there is a combo cord, Micro USB to plug into the phone and USB on the other end for power as well as a female headphone jack. This cord usually plugs into the back of the dock which just extends it to the Micro-USB plug in the cradle that you set the phone into. I want to use the cord only, plugged directly into the phone.
Unfortunately the phone only routes audio out through the Micro-USB port when its in car dock mode, this is separate from the car dock app running and is denoted by the steering wheel icon in the top bar of the screen. Its switched into this mode by the previously mentioned magnets in the car dock, I need a way to switch it on some other way.
The cord is convenient because you only have to plug ONE thing in and you have both power and audio. Make sense?
starcastic said:
The cord is convenient because you only have to plug ONE thing in and you have both power and audio. Make sense?
Click to expand...
Click to collapse
Believe me, convenience makes sense to me.. I took the HD dock, and modified it so that it could be mounted to a ProClip swivel mount.. Part of that involved opening up the actual dock.. There is an IC inside the dock mount, if I recall - and I suspect that may be doing some playing around with the USB/audio split function. I did not see any magnets in there. The phone knows the difference between the HD Dock and the Car Dock - so I suspect the IC is giving it some of its info to determine that. I am not sure if magnets are being used this time around.
Does anyone know if the remote that comes with the web-dock combo will work while the phone is in the car dock? It would be a great feature and a lot safer to change songs while you are driving.
When I first got my Photon I had a problem getting the phone to seat properly in the dock using the Sprint case with holster. The case was hitting the raised area around the connectors because the hole in the case wasn't big enough, so I took a small file and carefully enlarged the hole so it could seat properly. I said all of that to say this; The phone appeared to be seated enough to be docked but was off just enough to not get a good connection. If there was anything magnet related it would have been in the dock enough to have been activated. There is definitely something in the dock that is being monitored to put it in Car Mode. If I get a chance today I'll do some testing to try and determine what is going on.
Sent from my MB855 using XDA Premium App
Been offline while doing some other things or I'd have replied earlier but yeah, the magnet idea was just a guess based on other reports here, I've not had a chance to disassemble mine to see whats goin' on in there.
I have to say I'm not a huge fan of the fit and finish on the dock as it relates to the way the integrated connector mates with the phone, it has an odd angle on it and even then doesnt seat all the way. Thats both with and without my slim case, both with and without the included. I dont have the bulky chrome Dell-looking Sprint case but its SUPPOSED to accept that one if you remove the spacer insert in the dock.

30pin "L" shaped connector?

I will be using my GT 7.7 allot in the car and likely in the landscape orientation. This puts the 30pin connector and cable sticking straight out the side.
Is there any 90 degree ("L" shaped) 30pin connectors available? (similar to a "L" shaped SATA connectors -see picture-)
If there is, this would point the cable towards the dashboard and and make the cable routing less messy looking.
I searched but didn't come up with anything.
Note: I know I could use the Samsung OEM car dock (which, I think, has the power cable connector in the back/bottom) but was looking for a lower cost option.
Thank
Any luck with finding one of these cables?
Neogrin said:
I will be using my GT 7.7 allot in the car and likely in the landscape orientation. This puts the 30pin connector and cable sticking straight out the side.
Is there any 90 degree ("L" shaped) 30pin connectors available? (similar to a "L" shaped SATA connectors -see picture-)
If there is, this would point the cable towards the dashboard and and make the cable routing less messy looking.
I searched but didn't come up with anything.
Note: I know I could use the Samsung OEM car dock (which, I think, has the power cable connector in the back/bottom) but was looking for a lower cost option.
Thank
Click to expand...
Click to collapse
Have you had a look at my cheap solution for car a car dock and cable management yet?
I know this was posted awhile ago, but if you or anyone else is interested, the original samsung galaxy tab HDMI dock uses the same connector and works w/ the 7.7 (I know because i have a couple). You can get these on amazon for $15 right now. I believe this is the same dock for all the tabs and they just change the plastic piece that holds your tablet to accomodate the model (i have the original galaxy tab, the 7 Plus, and the 7.7 and they ALL work).
If you take it apart, the tablet connector looks exactly like what you are looking for - an L shaped 30-pin. The profile when plugged in is very thin and looks less like when you have the actual car charger cable plugged directly into the tablet.
I've attached a picture of what the cable end looks like. The nice thing is if you keep all the electronics intact, there is an area in the back that the car charger cable connects to pass power to this cable as well as a 3.5 jack for your auxiliary audio connector. Once you lop off the plastic tablet holder part, you have a bare ribbon cable that you can cover in black electrical tape and you just have to mount the pod onto the back of a hard tablet mount and plug your power and auxiliary audio cable into it.
Dear rEVOLVE
i liked your idea the most and i already ordered the dock, but i have a question, my ordered dock has HDMI output as well, so can i do some electronic modification Like this DIY USB OTG cable to connect USB hub to it in the same time as well, so finally i got i charging 30pin port, auxiliary 3.5 audio port, HDMI port, and USB port???
thank you
hi
I need some of help with power plug for galaxy tab
look at this http://forums.whirlpool.net.au/forum-replies.cfm?t=1931227&p=-1&#bottom
anybody got any ideas?

[MOD] Car Dock - Dissasembled

Ok so i HATE the car home launching on the dock, my X2 and OG Droid used a magnet to trigger the home but Razr uses a resistor in the usb pins. Without proper tools to rework the internal wiring i decided to completely replace the usb internals with a oem moto charger (from my X2 bundle) and hey it turned out well, and actually slides in better than before. (i had the phone in the dock plugged in when i applied the bonding agent to the back of the mount to ensure it was lined up correctly)
Want to sell the old guts?
I'd like to know how to make my phone go into dock mode without a dock.
My car has a place to sit the phone that works great but, no auto rotate.
Its junk to me, message me your address and I'll throw it in the mail in an envelope. The 43c is on me
If you haven't mailed it out, would you mind taking some full-on, hi-res pics of the components on the board? Might help those looking to simulate a dock connection without shelling out for the moto dock.
Sure I'll snap some shots of it and post them here.
Looking those pictures, I bet that's the same PCB inside the Webtop Travel Adapter. I just wonder if you could solder a USB A Male connector on the usb leads in place of the micro USB connector and then plug it into a usb hub connected to the y adapter w/power and OTG Cable and enable webtop...
Board closeups.
If you install the google car home app it will allow you to exit car mode while docked..no need to mod it.
I got the app here http://forum.xda-developers.com/showthread.php?t=1081009
Sent from my DROID RAZR using Tapatalk
bowtieduece said:
If you install the Google car home app it will allow you to exit car mode while docked..no need to mod it.
Click to expand...
Click to collapse
The problem isn't leaving the home app, its that it launches any launcher at all, it messes up things im doing example docking a paused netflix movie. Also more importantly it was causing hell with my launcher7, blanking out icons and such, even with a app that launches no car dock it still launches that app as a "home".
I get in and out of my car 20-50 times a day, i wish you could just disable the car dock in the system settings. all in all im happy with the dock now, the slider fits perfect now, before i had to wiggle it.
Why not just freeze the dock app?
Sent from my DROID RAZR using XDA App
How solid is the mount for if it were to be used for video capture while the car is in motion. I used to use my old HTC Incredible for OnBoard "GoPro" like video while I drive at the track. If this is solid I plan on doing the same.
Um...isn't there an app for blocking the dock app (NoDock). Requires root.
Been on vacation. Thanks for snapping the pics!
I have the opposite problem, my razr dont detect car dock, without this not working audio-by-microusb cable (original cardock cool feature). Help me, software reasons already excluded.
who may help me? may any software force _real_ car mode?
After 4 years my RAZR is finally dead (RIP) and I replaced it with another smartphone (Lenovo, but who cares)
One of the features I miss from RAZR is it beautiful car dock with charger, and the phone's ability to enter/exit car mode automatically.
So it's interesting if it's possible to try and use it, after some modification, on other phones
Razr uses a resistor in the usb pins
Click to expand...
Click to collapse
The question : what does the phone do for this detection ? is it pure hardware particular implementation or any phone is capable to detect this type of wiring and it's just a matter of software to do something with it?

[Q] S4 USB Car Dock?

Has anyone found a good car dock for the s4? I'm not looking for a car holder, but a real dock that the phone will slide into and will have a hard mounted usb connection on the bottom for charging the phone while in the dock. Something with bluetooth audio would be a bonus. I'm basically tired of having to plug in my usb and 1/8th inch jacks every time. I'd like to just dock the phone and have everything connected.
I see tons of cheap desktop docks on ebay, but nothing for the car.
Check out ibolt dock. I haven't gotten the phone yet but i saw that somewhere.
Sent from my Galaxy Nexus using xda app-developers app
I've been looking myself and haven't found one yet. Even the iBolt one needs you to plug it in everytime.
Hopefully something will come up.

Car mounts w/aux out

Presently using an SG4 with the I-Bolt x-pro dock to mount, charge and stream audio to my car stereo. Anything out there similar for the LG G3? Would hate to give it up as its the best system for nav/streaming/charging I've seen.
Check this thread out: http://www.thenewx.org/forum/showthread.php?t=49499#/forumsite/21065/topics/49499
I have the exact setup in my Xterra and it and cost $20. Popping the phone in and out takes about two seconds (excluding connecting any cables) and the mount is very sturdy. I use Tasker on my Android to launch my music app when I plug into my head unit with a 3.5 mm TRS cable). Actually I have a whole set of Tasker 'tasks' which automate a bunch of stuff related to my car...
buy a thin wireless charger and wireless charging case and tape it to the mount of your choice. If radio does not have bluetooth then buy a bluetooth reciver to fm-transmitter. Just slip the phone in and out of the mount. no wires need to be plugged in or out.

Categories

Resources